Body repair: dust, welding, grinding and LEV
Control the entire exposure and fire pathway, from the repair surface to safe discharge.
Free training · Approximately 110–175 minutes · Self-paced
Body repair technicians, welders, workshop supervisors and maintenance planners.

What you will learn
- Control the entire exposure and fire pathway, from the repair surface to safe discharge.
- Explain the harm pathway and who is exposed in the selected repair scenarios.
- Choose immediate protection, sustained controls and evidence for a safe release.
- Apply a fictional risk assessment, briefing and control-check exercise to the job.
10 detailed lessons · 9 applied activities · 3 required model or equivalent text practices · 16 final questions.
Public reading and browser practice are free. A free learner account is required to save LMS assessment, completion and a named certificate. Complete all required items, reach 80% and answer every critical question correctly.
Course map
Understand the repair and the people
- Understand this repair environment
- Choose controls that fit the actual task
Recognise the exposure and energy
- Body preparation: capture dust before it travels
- Grinding: make the equipment fit the repair
Choose and apply effective controls
- Welding fume: the source must stay inside the capture zone
- Hot work: follow heat and sparks into hidden spaces
Verify the working arrangement
- Extraction must not move the exposure onto the pavement
- Capture exhaust at the tailpipe and discharge it safely
Make the release decision
- Capstone: decide whether the job may proceed
- Take the learning into a real briefing
Primary guidance
- HSE: COSHH essentials for motor vehicle repair
- HSE HSG261: health and safety in motor vehicle repair
- HSE HSG17: safety in the use of abrasive wheels
- HSE: providing and using work equipment safely
- HSE: controlling risks from welding
- HSE MR6: hot work on painted panels
- HSE: welding and flamecutting in motor repair
- HSE: HSG258: discharge and stack siting, paragraphs 220–227
- HSE: Commissioning and verifying the complete LEV system
- HSE: Vehicle exhaust emissions
Scope
Independent awareness and decision learning for vehicle repair. Practical competence, EV high-voltage work, asbestos work and other specialist tasks require separate training and authorisation. GB baseline; check corresponding Northern Ireland duties and local arrangements.