Approx. 85–120 minutes including teaching, activities and course assessment. Your workplace project is separate.
Independent SHAREhub project preparation learning based on Project MS 5.0. Your training provider’s current form, matrix, marking instructions and submission arrangements govern the actual project. This course does not mark your project or award the IOSH Managing Safely certificate.
LESSON 1
Understand the project and the two different scores
Separate the IOSH workplace project from this preparation course and identify the required outputs.
SHAREhub Risk assessment and risk profiling topic image. Illustrative context only; use the stated case evidence to make your decision.
What you are preparing to do
The IOSH Managing Safely practical project asks you to apply risk assessment to a real work area and task. This course teaches the Project MS 5.0 approach in the guide supplied by 2020 Safety Training: define the work, select four significant hazards that need better control, and follow each through all nine columns. Your explanation should let a reader unfamiliar with the workplace understand the problem and the proposed solution.
There are two different assessments here. The workplace project described in your guide has 38 available marks and a pass threshold of 23. This SHAREhub preparation course has its own knowledge test, requiring 80% and all critical answers after the lessons and activities. Passing the online course does not mark your project or award an IOSH Managing Safely certificate. Your training provider assesses the actual submission and confirms the full IOSH award requirements.
Check the pack before you start
Obtain the project form, risk matrix, action table, marking instructions, submission route and deadline issued for your cohort. Confirm the version with your tutor. The supplied blank form has assessor, date, time, work area and task fields; a repeated nine-column table; and review date, signature and training-provider fields. A different issued form or an agreed company form must be checked with the provider before use.
Provider guidance commonly plans around two hours for gathering evidence and completing the project. This preparation course takes additional study time. Your own submission deadline, permitted assistance, resubmission arrangements and accepted file format come from your provider; do not borrow another provider’s email address, fee or deadline from an example on the internet.
Applied case
A learner scores 90% on this course and assumes their workplace project is automatically passed.
Decision and explanation
You met this preparation course’s requirements; the provider must still assess your own IOSH project.
The course result and the provider-marked workplace project are separate records.
Write a scope that a person who has never visited the workplace can understand.
SHAREhub Workplace transport topic image. Illustrative context only; use the stated case evidence to make your decision.
Make the boundary useful
Choose work you can observe safely and have permission to assess. Use your own workplace where practicable; agree another real workplace with the tutor if access is unsuitable. A simulated warehouse is useful for practice but is not evidence that you observed a real site. Do not enter a hazardous area, remove a guard or cause an exposure to obtain project information.
A scope such as “warehouse” is too broad to tell a marker what happens. A stronger description identifies the function, relevant layout, approximate scale, people and equipment. For example: “Ground-floor dispatch area with one loading door, a pedestrian packing bench and racking; six staff on the day shift and visiting delivery drivers.” Add the task: “Receiving pallet deliveries, moving cartons to the packing bench and cleaning the dispatch area after unloading.”
Choose depth over an unmanageable survey
Four hazards must fit the chosen area and task. Do not start a whole-company register if you can only observe one shift. Consider related non-routine work, including clearing obstructions, cleaning, maintenance and breakdowns, but state where specialist assessment is needed. A practical project is a sample of risk assessment skill, not a claim that every workplace risk has been captured.
Before visiting, agree the safe observation point, who can answer questions and which records may be consulted. Confirm whether photographs are permitted; they are not a substitute for the words in the required form. Keep personal, medical and commercially sensitive information out of your submission unless the authorised assessment arrangements specifically require it.
Applied case
The proposed scope is “all operations across three depots”. The learner has access to one packing area for a single morning.
Decision and explanation
The observed dispatch area, the relevant people and equipment, and the receiving and packing activities.
State a real and manageable area and task, with enough context to interpret all four hazards.
Gather evidence and consult the people doing the work
Distinguish observations, worker reports and verified controls from assumptions.
SHAREhub Consultation and workforce engagement topic image. Illustrative context only; use the stated case evidence to make your decision.
Use more than one source
Walk through the task from a safe position. Watch a representative part of the activity, ask the workers what changes at busy times, and examine relevant local information. Incident and near-miss reports may identify recurring problems; instructions, maintenance records and safety data sheets can explain intended precautions. Check that documents match the equipment, substance and process actually used.
Ask open questions: “What happens when the bay is full?”, “Who crosses this route during cleaning?” and “How do you know that this safeguard works?” Compare the answers with observation. Training attendance supports evidence of instruction but does not demonstrate that a barrier is sound or that a method is followed. Absence of injury is not proof of adequate control.
Keep evidence and uncertainty distinct
Record what you saw, what a worker reported and what still needs confirmation. If the extraction inspection date cannot be established, do not label the system compliant or effective. Describe the uncertainty and seek competent advice. If no relevant control is identified, say that honestly; do not invent one just to fill a box. Also check for less visible controls before writing “none”.
Use evidence to explain the control gap and the risk rating. You do not need to attach every source to the project unless your own instructions ask for supporting material. Keep the form concise, but retain enough working notes to explain your reasoning to the tutor. Raise an immediate danger through the workplace procedure immediately; the assessment deadline never justifies leaving exposure unmanaged.
Applied case
The written route plan shows a pedestrian barrier. Observation shows a missing section and workers walking through the gap.
Decision and explanation
A barrier is specified, but a section is missing and workers use the gap; effective separation is not verified.
Describe actual protection and its limitations rather than treating a document as implementation.
Explain where marks are available and why a coherent row matters more than filling space.
SHAREhub Risk assessment and risk profiling topic image. Illustrative context only; use the stated case evidence to make your decision.
The marking structure in this guide
The Project MS 5.0 structure described in the supplied guide totals 38: one mark for the opening assessment details, nine marks for each of four hazard rows, and one mark for the closing details. Four times nine is 36; the two administrative marks bring the total to 38. The project pass threshold is 23/38, approximately 60.5%. Aim for a complete, defensible assessment rather than treating 23 as a target for leaving boxes blank.
The nine row elements are: hazard; who might be harmed; how harm could occur; existing controls; initial L, C and R rating; additional controls; residual L, C and R rating; action owner; and action date. Each rating group is one element, not three extra marks. Your provider’s current marking scheme governs the actual award of marks.
Marks follow the logic
A filled cell does not automatically earn a mark. Each answer must be appropriate and consistent with the hazard. If the first column is not a meaningful hazard, or the row tells an incoherent story, other entries cannot rescue it merely by containing words. An unclear hazard can put all nine marks for that row at risk. That is why you should check the chain from source to person, harm, controls and action.
Complete the administrative fields as carefully as the technical work. At the top, identify yourself, the actual assessment date and time, area and task. At the bottom, include a sensible review date, your signature in the accepted format, and the correct provider name. “2020 Safety Training Ltd” applies only if it is your enrolled provider; confirm the details in your issued pack. Do not invent a signature or submit another learner’s work.
Applied case
A learner adds three points for each L, C and R group and claims the project has more than 38 marks.
Decision and explanation
1 opening mark + four rows of 9 marks + 1 closing mark.
The L/C/R group is one marking element. Complete and justify every element.
Separate the source of harm from an injury, vague label or missing document.
SHAREhub Slips and trips topic image. Illustrative context only; use the stated case evidence to make your decision.
Write what can cause harm
A hazard is something with the potential to cause harm. An injury is the outcome; risk concerns the likelihood and seriousness of harm in the actual conditions. “Broken ankle” is an injury, not a hazard description. “Cable from the packing-bench charger trails across the pedestrian aisle” identifies a physical condition and location that can be investigated and controlled.
Use a short sentence that identifies the source, activity and relevant condition. Compare “manual handling” with “two packers repeatedly lift awkward cartons from floor-level pallets to a high bench”. Compare “chemical” with “cleaner decanted from a corrosive concentrate into open containers at the dispatch sink”. Avoid combining several unrelated hazards into a single row: it becomes unclear which people, score and action apply.
Choose four distinct hazards that need improvement within your agreed scope. Look at safety and health: vehicle movement, handling, substances, noise, dust, posture and work organisation may all be relevant. A spread of types helps demonstrate breadth, but the evidence must support the choice; do not invent a chemical hazard simply to complete a category set.
Do not force the initial score to be 8 or higher to make a hazard eligible. The “minimum 8” claim in the supplied narrative is not a universal assessment rule. Inadequate control depends on the actual hazard, exposure, applicable requirements and reliability of controls. Use realistic L and C values, explain the gap and consult your tutor if your selection is unsuitable. A low-looking number does not excuse a missing essential precaution.
Applied case
Three proposed rows say “fall”, “injury” and “health and safety”. Another describes a damaged cable lying across the packing walkway.
Decision and explanation
The charger cable crosses the packing walkway at ankle height during dispatch.
Identify the specific source and condition, then explain the injury mechanism in the next relevant column.
Connect each hazard to specific groups and a credible route to injury or ill health.
SHAREhub Manual handling topic image. Illustrative context only; use the stated case evidence to make your decision.
Who might be harmed
List the people who can actually encounter that hazard: operators, packers, cleaners, maintenance staff, drivers, contractors, visitors or the public, as relevant. Add approximate numbers where known and useful, without inventing headcounts. Explain exposure at a particular time if it matters. Cleaners may enter after a shift; maintenance staff may approach equipment during a breakdown.
Do not paste an identical list into every row. A delivery driver may be exposed at the vehicle interface but not to a sealed chemical process in a restricted room. Consider new or inexperienced workers, people with communication needs, young workers, pregnancy or disability where relevant to task arrangements. Record the needs that affect protection without including private diagnoses or personal medical histories.
How might people be harmed
Describe the chain: source or condition → exposure or event → injury or ill health. For the cable, a person walking across the aisle catches a foot, falls onto the hard floor and may suffer sprains or a fracture. For repeated lifting, force, awkward reach and twisting can overload muscles and spinal structures and contribute to musculoskeletal injury. This gives a reason for your consequence choice.
For substances, name relevant routes such as skin or eye contact, inhalation or ingestion, supported by the actual product and task information. Do not assume that every liquid gives off harmful vapour or that pH alone predicts all harm. An SDS helps identify properties and precautions, but task-specific use, concentration, quantity, exposure and existing measures still need assessment. Seek specialist help when you cannot interpret the risk reliably.
Applied case
A handling row lists “everyone, cuts” even though the evidence concerns two packers lifting cartons repeatedly from low pallets.
Decision and explanation
The two packers repeatedly lifting and twisting may develop back or shoulder musculoskeletal injury.
Use the people and harm mechanism supported by this hazard, rather than a generic list.
Describe controls in place now, their evidence and the reason further action is needed.
SHAREhub Consultation and workforce engagement topic image. Illustrative context only; use the stated case evidence to make your decision.
Existing means present and working
The existing-controls column describes the position at the time of assessment. Check physical measures, work organisation, training, supervision, inspection, maintenance, access controls and suitable PPE. Describe relevant details. “A painted pedestrian line and driver induction; no physical barrier at the loading-door crossing” is more informative than “training and PPE”.
Distinguish an installed effective control from a proposal, quote, order or written intention. A trolley in a locked store is not reliably available for the task. A guard shown on a drawing but removed from the machine cannot be treated as present. Say what is known, what does not work and what requires confirmation. Never make up controls or hide genuine effective ones to create room for additional measures.
Make the gap visible
Explain why the current combination is insufficient for the actual exposure. For instance, a manual handling briefing does not remove repeated heavy, awkward lifts; an entrance sign does not remove water from the floor; high-visibility clothing does not physically separate a person from a forklift. Effective administrative and PPE measures may still be necessary, but their limitations should be clear.
Do not assume a control is ineffective solely because the training date is old. Ask whether the task has changed, competence is maintained and behaviour matches the method. Equally, a recent course certificate is not proof of safe performance. Use actual evidence. Where serious danger exists, record and escalate immediate protection now, then describe the longer-term solution and its verification.
Applied case
A replacement trolley has been ordered for next week, but packers still move cartons by hand today.
Decision and explanation
In additional actions until it is delivered, suitable, available and implemented.
A planned purchase is not a functioning control. Rate the current situation using what actually exists.
Complete the opening details and keep each row coherent
Use the form’s opening fields and nine-column structure without losing the risk story.
SHAREhub Risk assessment and risk profiling topic image. Illustrative context only; use the stated case evidence to make your decision.
Complete the top before rating
Write your own assessor name and the date and time of the assessment. Describe the work area and task with enough context for someone who was not there. If the assessment covers a particular observation period or shift, make that clear. A date of submission is different from the date of observation; label any distinction needed rather than silently changing the evidence date.
In the fictional example, the assessment is at 09:30 on 26 October 2026 in a small ground-floor dispatch bay. Work includes receiving pallets, packing cartons and cleaning. Six staff use the area, with drivers at delivery times. These details make the vehicle, handling, chemical and cable rows understandable. Your own project must use your own real observations, not this fictional date, staffing or layout.
Read across before moving down
After drafting a row, read it as a single sentence: this source exposes these people in this way; these controls exist; this is the justified current score; these measures are needed; this target score depends on implementing them; this person acts by this date. If the additional control addresses a different hazard, or a residual score assumes a measure not listed, repair the chain.
Complete one clear row, check its logic, then apply the method to the other three. Keep within the field size and make every essential point visible when the file is reopened. A cell with clipped text may hide the action or condition the marker needs. Use concise, precise wording, not unexplained abbreviations or several unrelated hazards sharing one rating.
Applied case
A learner describes a vehicle collision, proposes gloves, then reduces the risk of chemical burns in the same row.
Decision and explanation
The hazard, harm and control do not form a consistent chain.
Each element must follow the same hazard and credible mechanism.
Use the supplied scale consistently and explain what each number represents.
SHAREhub Risk assessment and risk profiling topic image. Illustrative context only; use the stated case evidence to make your decision.
Likelihood is about the actual exposure
Likelihood asks how likely the harmful event or outcome is in the defined circumstances, with current controls. Look at frequency and duration of exposure, number of people involved, opportunity for error, condition of equipment and reliability of safeguards. A frequent task may have low likelihood when robust protection is effective. A rare task can be hazardous when the protection is weak and the outcome severe.
The learning calculator uses a five-point scale: 1 very unlikely, 2 unlikely, 3 fairly likely, 4 likely and 5 very likely. Use the exact descriptors and definitions supplied with your assessment. Numbers without an explanation are weak evidence. State, for example, that pedestrians cross during frequent deliveries while visibility is restricted and separation is missing, rather than simply declaring “L3”.
Consequence describes credible foreseeable harm
Consequence rates how serious the harm could be if the event occurs. The learning scale runs from 1 insignificant, through 2 minor, 3 moderate and 4 major, to 5 catastrophic. Your issued definitions control how injury and ill-health outcomes map to these labels. Do not invent absence-day thresholds where the scale does not specify them.
Do not automatically select death for every trivial hazard, or automatically select the average minor outcome when a fatal event is credibly foreseeable. A pedestrian struck or crushed by a forklift may be killed, so C5 can be justified. A statement such as “only a small chance” concerns likelihood, not severity. Explain the foreseeable event and use competent advice where you cannot judge it. Scores are ordered judgements for prioritisation, not measured probabilities or a guarantee of safety.
Applied case
A pedestrian could be crushed by a reversing truck. The learner chooses C1 because deliveries occur only once per day.
Decision and explanation
Delivery frequency informs likelihood; credible fatal crushing harm can still justify a high consequence.
Keep likelihood and consequence conceptually separate and justify the foreseeable harm.
Multiply L by C correctly and use the action table without treating it as permission to work.
SHAREhub Workplace transport topic image. Illustrative context only; use the stated case evidence to make your decision.
Multiply, then interpret
The 5 × 5 method calculates R = L × C. L3 and C4 give R12; L4 and C4 give R16. Keep all three entries visible. The only possible products are 1, 2, 3, 4, 5, 6, 8, 9, 10, 12, 15, 16, 20 and 25. A result of 7, 11 or 18 is a calculation error in this method. Recheck the factors rather than selecting a nearby number.
For the action table described in your guide: 1–2 means maintain controls and review, 3–6 means monitor and consider improvement, 8–12 means improve within a defined timescale, 15–16 requires urgent action with stopping if necessary, and 20–25 means stop the activity and take immediate action. Use the issued table’s exact instructions if they differ. No table overrides an essential precaution, legal requirement or immediate danger.
Use the action to protect people
The number helps prioritise, but the important question is what must change now. For a high collision risk, suspend the affected vehicle movement or prevent access through a suitable safe arrangement immediately. A future barrier installation date does not allow the unsafe crossing to continue in the meantime. State an interim measure and the condition that must be met before the work resumes.
Do not manipulate L or C to fit the control action you prefer. If the evidence and action seem inconsistent, revisit the scenario, definitions and the need for specialist input. A score of 6 may still require a missing essential control; a score of 15 is not made acceptable by writing “monitor”. Record both the judgement and the practical response. Use the calculator in the practice lab to explore the arithmetic, then explain the evidence separately.
Applied case
A row has L4 × C4 and schedules an unprotected activity to continue for six weeks while a new guard is ordered.
Decision and explanation
R16 requires urgent protective action, including stopping where necessary; a six-week order is not interim protection.
Urgency must match the actual danger. Protect people now and verify controls before release.
Explain elimination, substitution, engineering, administration and PPE in a task-specific plan.
SHAREhub COSHH controls and health surveillance topic image. Illustrative context only; use the stated case evidence to make your decision.
Use the hierarchy to challenge the first idea
Start by considering elimination: can the hazardous task, material or unnecessary exposure be removed? Next consider substitution with a genuinely less hazardous alternative, assessing any new risks. Engineering controls change the physical arrangement, such as an enclosed process, suitable guarding, lifting assistance or physical separation. Administrative controls organise how work is done, including access, methods, training and supervision. PPE protects the individual from remaining exposure when properly selected and used.
These five levels are a hierarchy of control, not five boxes that must all be filled for every hazard. Prefer measures that control the source or prevent exposure over those that depend entirely on remembering instructions. The SHAREhub library also uses ERICPD as a separate planning framework; do not combine the two systems or count its headings as extra IOSH marking columns.
Write a specific and feasible improvement
Replace “training” with who needs instruction, on what changed task and before which exposure. Replace “PPE” with the assessed equipment, protection purpose, fit or compatibility arrangements and its limitations. A chemical glove must suit the actual product and exposure; “nitrile” alone is not a universal specification. A substitution needs confirmation that the replacement works safely in the process and does not introduce a different hazard.
For an awkward carton lift, challenge delivery pack size, receiving height, layout and a suitable lifting aid before relying on a refresher briefing. For the dispatch crossing, redesign movement and separate people from vehicles; high-visibility clothing and induction support the arrangement. State what will prevent the harmful event, how it will be introduced safely, who checks it and what remaining risk still needs management.
Applied case
A manager proposes a poster and gloves to solve repeated heavy lifts from the floor.
Decision and explanation
Review pack size, work layout and suitable handling assistance before relying on instructions and PPE for remaining risk.
Choose measures that change the actual source or exposure, then support their effective use.
Justify the residual risk without pretending actions are complete
Explain which rating factor changes and distinguish target protection from verified protection.
SHAREhub Manual handling topic image. Illustrative context only; use the stated case evidence to make your decision.
Residual means after the stated measures
The new or residual rating estimates the position after the additional controls are implemented and work effectively. State that condition. If you list a new barrier and a revised route, you cannot use their lower target rating as the current rating while the barrier is still on order. Until implementation and verification, manage the existing risk and any interim arrangements explicitly.
Reconsider L and C using the same scale. A reliable barrier may reduce the chance of a collision but does not make a collision harmless if it happens. Retaining C5 and reducing L3 to L1 can therefore be coherent. Reducing the consequence may be justified when the hazard or harmful energy changes, such as replacing a substance with an independently assessed less harmful one. A lower number must follow the described measure, not an arbitrary subtraction.
Check the limits of the reduction
Do not automatically reduce both factors to 1 after adding training, PPE or a new procedure. Describe why exposure becomes less likely or why the resulting harm changes. Check whether a new lifting aid creates trapping, pushing or maintenance risks. Retain the potential for serious harm when the event can still credibly occur. Health surveillance can detect effects and inform control review; it does not itself remove exposure.
Your guide expects a lower residual rating where the selected measures improve a control gap. If the rating remains high, revisit the measures and escalation. Do not lower it merely to get a pleasing band. “Acceptable” means the required precautions and relevant standards have been satisfied for the task, not simply that the cell is shaded differently. If the hazard is fully removed, explain the elimination and follow the issued form’s convention rather than inventing an L0 value in a 1–5 scale.
Applied case
A driver briefing is scheduled tomorrow. The learner records that today’s current collision risk is already 1 × 1.
Decision and explanation
Keep the current rating evidence-based and show the lower target only as conditional on implemented, verified measures.
A planned action is not current protection and does not automatically change consequence.
Make each action accountable, time-bound and proportionate to the risk.
SHAREhub Workplace transport topic image. Illustrative context only; use the stated case evidence to make your decision.
Name responsibility that can be acted on
Use a specific person or job role with authority to deliver or arrange the measure. “The company”, “HSE” or “everyone” does not identify who will act. If the barrier needs an engineering manager and the route briefing needs a dispatch supervisor, state each responsibility clearly. Identify who will monitor continued use, not just who purchases the item.
An assessor can recommend an action, but writing a role on a form does not prove that the person accepted it or that the work is authorised. In real risk management, discuss practical arrangements with the responsible people, agree resources and authority, and confirm the record through the local process. For your project, describe the accountable role and avoid pretending that an unapproved expenditure has already been authorised.
Use dates that match the urgency
Give a specific calendar date, with an immediate or before-next-use instruction where needed. “Ongoing” alone does not say when installation must happen. “Within a week” can be ambiguous after a document is forwarded; add the actual date. Repeated checks can be expressed as a frequency after an explicit start date, such as “supervisor checks the route before each delivery from 26 October 2026”.
Separate immediate protection from a permanent repair. In the fictional bay, stop the affected vehicle movement now; implement a suitable interim separation before any authorised movement; install and inspect the permanent barrier by 28 October. Record who verifies the arrangement and the condition for reopening. Never propose that workers carry on with uncontrolled serious exposure until a convenient later date. The completion date of a purchase is not the risk assessment review date.
Applied case
The actions read “sort barriers, management, ongoing”. The crossing remains in use.
Decision and explanation
Dispatch supervisor stops the affected movement now; engineering manager installs and checks the agreed barrier by 28 October before reopening.
Identify immediate protection, a responsible role, a calendar date and a verification/release condition.
Follow four coherent rows while keeping fictional examples separate from your own project.
SHAREhub Risk assessment and risk profiling topic image. Illustrative context only; use the stated case evidence to make your decision.
Read the completed example in context
Open the four-row worked example in the practice lab. The fictional dispatch task includes vehicle movements, repeated awkward carton lifting, handling a corrosive cleaning concentrate and a charger cable crossing a walkway. The people and controls differ between rows because the exposures differ. The example shows the full opening details, all nine row elements and the closing details.
Use the example to understand the quality of reasoning, not as a submission to copy. In the vehicle row, painted lines and induction are present, but a shared crossing remains uncontrolled. The initial 3 × 5 = 15 reflects frequent interactions and credible fatal crushing harm. Planned route redesign and separation support a target 1 × 5 = 5 only after they are implemented and checked. The fatal consequence is not reduced simply because a barrier is proposed.
Compare the other three pathways
In the handling row, the initial 4 × 3 = 12 is supported by repeated awkward lifts. Assessed load-size changes, receiving-height improvements and suitable assistance support a conditional 1 × 3 = 3. In the chemical row, actual corrosive concentrate information supports 3 × 4 = 12; a verified less hazardous substitute can change the harm profile as well as exposure, supporting the stated conditional 1 × 2 = 2. That reduction is valid only if the replacement and the complete task assessment support it.
In the cable row, rerouting the supply removes the route obstruction and supports the stated target rating. The original rows do not share one generic “be careful” action. Each has its own responsible role, implementation timing, interim protection and check. Open the practice lab’s row selector and read across each field; then use the independent lesson decision below. A photo or example is not evidence that your own workplace has the same conditions.
All four complete example rows
Fictional learning example — do not copy into your project. Assessed by the fictional dispatch supervisor at 09:30 on 26 October 2026. Ground-floor dispatch bay, six day-shift staff and visiting drivers. Task: receive pallets, transfer and pack cartons, and clean the dispatch area.
Fictional hazard 1
What is the hazard?
Forklift movements meet a pedestrian route at the dispatch loading-door crossing, with restricted visibility.
Who might be harmed?
Six dispatch staff, visiting drivers and cleaning staff using the crossing.
How might people be harmed?
A pedestrian could be struck or crushed by the truck or load, with fatal injury foreseeable.
Existing risk control measures
Painted walkway line, driver induction and high-visibility clothing; no physical separation at the crossing. Staff report near misses.
Initial risk rating (L × C = R)
3 × 5 = 15. Frequent crossing during deliveries and restricted visibility make an event fairly likely; crushing can be fatal.
Additional controls
Stop affected movements now. Redesign routes to remove unnecessary crossing; install suitable segregation and an assessed controlled crossing where still needed. Brief all users and verify during deliveries before reopening.
New risk rating (residual L × C = R)
Target 1 × 5 = 5 only after measures are installed and verified. Exposure becomes very unlikely; collision harm can still be fatal.
Action / monitored by whom?
Dispatch supervisor: immediate control, briefing and daily monitoring. Engineering manager: layout, barriers and competent checks.
Action / monitored by when?
Immediate stop on 26 October 2026; no affected movement until a suitable safe arrangement is verified. Permanent route by 28 October 2026; check before each delivery thereafter.
Fictional hazard 2
What is the hazard?
Repeated lifting of awkward 18 kg cartons from floor-level pallets to a high packing bench, with twisting.
Who might be harmed?
Two packers doing repeated lifts on the day shift.
How might people be harmed?
Force, low lifting height, reach and twisting can cause back and shoulder musculoskeletal injury.
Existing risk control measures
General handling instruction; a small trolley is available but does not remove floor-to-bench lifting or the awkward reach.
Initial risk rating (L × C = R)
4 × 3 = 12. Repeated awkward lifts make injury likely; moderate musculoskeletal injury is foreseeable in this stated case.
Additional controls
Suspend this lifting method pending a task assessment. Agree smaller packs, suitable receiving height and an assessed handling aid/layout. Check pushing, trapping and maintenance risks. Instruct users in the changed method.
New risk rating (residual L × C = R)
Target 1 × 3 = 3 after redesigned transfers and assistance are verified. Likelihood reduces; injury remains possible if the remaining handling fails.
Action / monitored by whom?
Dispatch manager: supplier and layout changes. Supervisor: stop the unsuitable method, confirm a safe interim method and monitor use.
Action / monitored by when?
Stop the unsuitable method on 26 October 2026; no restart without an assessed safe method. Permanent changes and user trial by 29 October 2026.
Fictional hazard 3
What is the hazard?
Decanting a corrosive cleaning concentrate into open containers at the dispatch sink, with foreseeable splash contact.
Who might be harmed?
Two cleaning operatives and a packer using the neighbouring sink area.
How might people be harmed?
Splashes can cause serious skin burns and permanent eye injury; actual product information identifies corrosivity.
Existing risk control measures
SDS is available; general gloves supplied, but product compatibility and the open transfer arrangement have not been verified.
Initial risk rating (L × C = R)
3 × 4 = 12. Open manual transfer makes splashing fairly likely; major eye or skin injury is credible for the stated concentrate.
Additional controls
Stop open decanting now. Assess a ready-to-use less hazardous substitute, confirm cleaning effectiveness and new risks, and remove the concentrate from this task. Arrange suitable closed dispensing where needed, compatible PPE and training for remaining exposure.
New risk rating (residual L × C = R)
Target 1 × 2 = 2 applies only to the verified replacement/task with minor irritation as its credible harm. If the corrosive concentrate remains, retain its consequence and reassess.
Action / monitored by whom?
Facilities manager: substitution and task assessment. Cleaning supervisor: stop decanting, brief users and check supplies and method.
Action / monitored by when?
Stop on 26 October 2026; substitute and verify before cleaning resumes using the changed method, planned by 27 October 2026. Check each issue of product thereafter.
Fictional hazard 4
What is the hazard?
A charger cable crosses the pedestrian aisle beside the packing bench during dispatch.
Who might be harmed?
Six dispatch staff, cleaners and occasional authorised visitors using the aisle.
How might people be harmed?
A person may catch a foot, fall onto the hard floor and sustain a sprain or wrist fracture.
Existing risk control measures
Verbal reminders; cable is sometimes moved but is not routed clear of the walkway.
Initial risk rating (L × C = R)
3 × 3 = 9. Frequent passage and recurring obstruction make a trip fairly likely; a moderate injury is credible.
Additional controls
Protect the route immediately with a safe alternative. Competent electrical staff relocate the charging supply/cable route so it cannot cross the aisle. Check access, escape and electrical suitability; include cable routing in pre-shift checks.
New risk rating (residual L × C = R)
Target 1 × 3 = 3 once the crossing cable is removed and routing verified. Trip likelihood reduces; do not reduce severity merely because a reminder was issued.
Protect the route now on 26 October 2026. Re-route and verify before the aisle reopens, by end of 26 October 2026; inspect before each shift.
Closing example: scheduled review 26 November 2026, earlier if routes, equipment, products or controls change, or after concerns/incidents. Fictional learner signature: Practice learner. Provider: use the actual enrolled provider, confirmed in your pack. Target ratings are conditional, not evidence that controls have already been implemented.
Applied case
A learner copies all four fictional rows, including the assessment date and staffing, into their real submission.
Decision and explanation
Study its structure and reasoning, then assess four actual hazards in your agreed real workplace.
Your project must demonstrate your own observations and judgement. Worked cases are learning examples.
Check technical logic and administrative completeness, then use the provider’s actual submission route.
SHAREhub Consultation and workforce engagement topic image. Illustrative context only; use the stated case evidence to make your decision.
Review the whole assessment
Read all four rows aloud as risk stories. Check that each hazard is precise, the people are relevant, the harm supports C, the existing controls reflect today, the additional measures address the gap, both products are correct, the residual assumptions are explicit, and each action has an owner and date. Use the 38-point self-review checklist in the practice lab, remembering that it is a preparation aid, not an automatic examiner mark.
Ask a colleague who understands the work to challenge the facts and practical measures. Discuss the controls with the people doing the activity and make amendments that are suitable and sufficient for the actual risks. A signature confirms the author’s review in the accepted process; it does not prove the controls were installed or transfer the employer’s responsibilities. Obtain specialist advice where the subject exceeds your competence.
Save, reopen and submit
Complete the review date, signature and correct provider details. Choose a sensible scheduled review period based on the task, stability and risk, and specify earlier triggers such as changes, incidents, worker concerns or failed controls. A fixed future review date does not justify ignoring a changed process today.
Save the completed form with the filename and format requested by your provider. Close and reopen it to confirm all pages, text, ratings and signature have been saved and remain readable. Check for hidden overflow in form fields. Submit only the required material through the instructed route before the deadline. Keep a copy and evidence of receipt. If no confirmation arrives, contact the provider through the stated route. This learning course does not send your project or assess your employer’s live risk assessment.
Applied case
The file looks complete on screen, but after reopening it, several fields are blank and the final page is missing.
Decision and explanation
Resolve the file problem and reopen the saved final version to verify every required field and page is readable.
The marker can assess only what is visible in the received file.
Use feedback and transfer the assessment into practice
Explain what to do after submission, when to revise the assessment and how to finish this course.
SHAREhub Slips and trips topic image. Illustrative context only; use the stated case evidence to make your decision.
Respond to feedback precisely
Your provider marks the workplace project against its current scheme and confirms the result. If amendments are needed, read the comments row by row and identify the underlying error: hazard clarity, exposed people, unsupported harm, missing control evidence, arithmetic, weak additional controls, unrealistic residual assumptions or unowned actions. Ask for clarification if the instruction is unclear, and follow the resubmission process and deadline supplied to you.
Improve the reasoning rather than merely adding words or changing numbers. A comment about uncontrolled exposure may require a different control and an immediate action, not a lower likelihood. A comment about a vague hazard may require rewriting the complete row so that every column follows it. Keep your version history and submit the amended file as directed; do not assume a revised copy has been accepted until the provider confirms it.
Make assessment lead to safer work
For real workplace use, communicate the findings, implement agreed controls through responsible roles, check their effectiveness and update the record when conditions change. Verify actual behaviour as well as installation. Involve the affected team in the new method and check understanding. A signed assessment and a course certificate cannot replace these steps.
To finish this preparation course, complete all lesson decisions and required activities, then submit the independent 20-question test. You need 80% and all critical answers. In the recorded LMS course, use “Complete this course and return to your eLearning” after the confirmed pass; the native system applies the course completion and certificate conditions. Any certificate is for this SHAREhub preparation course, not the IOSH award or your workplace project mark. Public practice records remain browser practice.
Applied case
The workplace changes its delivery route after the project was submitted. The scheduled review date is still several months away.
Decision and explanation
Review the actual controls now, involve the team and update the assessment before relying on the old arrangement.
Change and ineffective protection trigger review; the project result does not freeze the workplace.