SHAREhubInteractive practice
FREE · 100 ORIGINAL QUESTIONS

Managing Safely exam practice

Independent SHARE revision for people studying IOSH Managing Safely. Practise leadership, risk assessment, controls, responsibilities, management systems, hazards, investigation and performance.

Choose 10, 30 or all 100 questions, or practise one topic. Submit to see correct answers and a short study explanation for every question. Unlimited practice is open to everyone. Approx. 10–15 minutes for a quick set including review.

Study reader: the answers are intentionally shown here. Use the interactive practice set when you want to answer before reviewing.

Reasons, leadership and accountability

Care for people, business reasons, delegation and worker involvement.

STUDY QUESTION 1

A supervisor wants safer work because nobody should leave work with a preventable illness. Which reason is being emphasised?

  1. The insurance-renewal process
  2. A marketing target
  3. The calculation of a fine
  4. The moral reason

Correct answer: The moral reason

The moral case starts with protecting people from avoidable suffering. Financial and legal reasons also matter, but this statement is about care for workers and others, rather than the cost of a claim or a court requirement.

STUDY QUESTION 2

After an injury, production stops, a replacement worker needs training and an order is delayed. Which case for prevention do these effects illustrate?

  1. Proof that the injured person caused the event
  2. A reason to avoid internal reporting
  3. The financial and business case
  4. The absence of any legal duty

Correct answer: The financial and business case

Disruption, replacement labour and lost business can create costs beyond immediate treatment or repair. Recognising those costs supports prevention; it does not replace the moral duty to protect people or justify hiding an incident.

STUDY QUESTION 3

An organisation checks which risk-assessment duties apply to its work. Which reason for managing safely is central to this decision?

  1. Replacing consultation with paperwork
  2. Meeting legal obligations
  3. Avoiding every possible expense
  4. Guaranteeing that insurance will pay

Correct answer: Meeting legal obligations

Legal duties require organisations to manage relevant risks and comply with applicable requirements. Assessments should support effective protection in practice. A document created only for appearance does not establish that a duty has been discharged.

STUDY QUESTION 4

Which THREE arguments belong in a balanced case for managing safety and health?

  1. Prevent avoidable harm to people
  2. Meet applicable legal duties
  3. Reduce disruption and avoidable business losses
  4. Make every manager immune from liability

Correct answers: Prevent avoidable harm to people · Meet applicable legal duties · Reduce disruption and avoidable business losses

The moral, legal and financial cases reinforce each other. Effective prevention protects people, supports compliance and reduces avoidable loss. None of these arguments provides immunity from liability or removes the need to check actual working conditions.

STUDY QUESTION 5

A manager asks a competent team leader to inspect a storage area. What must the manager retain?

  1. The right to assume the inspection was effective without checking
  2. A guarantee that the team leader now holds every employer duty
  3. Freedom from making any further safety decisions
  4. Accountability for ensuring the arrangements work

Correct answer: Accountability for ensuring the arrangements work

Tasks and responsibility for carrying them out can be delegated with suitable authority, competence and resources. The manager still needs oversight and must check the result. Delegation does not make accountability disappear or transfer every statutory duty to the delegate.

STUDY QUESTION 6

Which instruction makes delegation most effective?

  1. Delegate only the blame if something goes wrong
  2. Give the task to whoever has the least work, regardless of competence
  3. Define the task, authority, resources and reporting arrangements
  4. Ask someone to sign a checklist without explaining its purpose

Correct answer: Define the task, authority, resources and reporting arrangements

A delegated task needs a clear purpose, a competent person, enough time and resources, and a route for reporting concerns. These arrangements allow the manager to check delivery and intervene where protection is missing. A signature alone provides little assurance.

STUDY QUESTION 7

A director repeatedly accepts unsafe shortcuts to meet delivery targets. What message is the workforce most likely to receive?

  1. The shortcuts cannot affect the wider culture
  2. Production is being given priority over the stated safety commitment
  3. The written policy automatically outweighs observed behaviour
  4. Only the safety adviser influences attitudes

Correct answer: Production is being given priority over the stated safety commitment

Workers notice the decisions leaders make under pressure. Tolerating shortcuts can undermine a written commitment and normalise weak controls. Visible leadership means resolving conflicts, providing suitable resources and supporting safe decisions when deadlines are difficult.

STUDY QUESTION 8

Which TWO arrangements make worker involvement useful?

  1. Workers can raise practical concerns with managers
  2. Managers explain the actions taken in response
  3. Only managers may identify hazards
  4. Workers receive information only after decisions are irreversible

Correct answers: Workers can raise practical concerns with managers · Managers explain the actions taken in response

Worker involvement needs effective upward communication and a visible response. People doing the work can identify practical difficulties and changes that records miss. Consultation should influence decisions while options remain available, rather than merely announce a completed decision.

STUDY QUESTION 9

Which purchasing decision best demonstrates that safety is integrated with business management?

  1. Choose solely on purchase price and consider guarding after delivery
  2. Treat safety as a separate issue for the annual audit
  3. Ask the supplier to accept all responsibility for future use
  4. Check safe use and maintenance requirements before selecting a machine

Correct answer: Check safe use and maintenance requirements before selecting a machine

Design and purchasing decisions can create or remove risks for years. Considering safe operation, maintenance and competence at the outset integrates prevention into ordinary management. Supplier information is useful, but the employer must still assess its own use.

STUDY QUESTION 10

A manager obtains specialist advice about an unfamiliar process. What is the appropriate next step?

  1. Store the advice without comparing it with the actual work
  2. Treat every recommendation as proof of implementation
  3. Use the advice to make and verify suitable management decisions
  4. Assume that hiring an adviser transfers all accountability

Correct answer: Use the advice to make and verify suitable management decisions

Competent advice helps managers understand risks and select arrangements. Management must still decide what is required, allocate resources, implement controls and check effectiveness. Advice on paper is an input to action, rather than evidence that protection exists.

Risk assessment

Hazards, events, likelihood, consequence and the assessment process.

STUDY QUESTION 11

A cleaning product can damage skin. In this statement, what is the product’s harmful property?

  1. A measure of insurance cost
  2. A hazard
  3. A likelihood score
  4. The final accident report

Correct answer: A hazard

A hazard is a source or situation with the potential to cause harm. The assessment then considers how people may encounter it and what could happen. The harmful property is distinct from the chance of exposure and the eventual outcome.

STUDY QUESTION 12

A worker touches an exposed live terminal and receives an electric shock. Which part describes the hazardous event?

  1. The contact between the worker and the live terminal
  2. The organisation’s annual safety budget
  3. The colour of the electrical enclosure
  4. The name of the employee’s department

Correct answer: The contact between the worker and the live terminal

The hazardous event describes how a person or something else interacts with the hazard. Tracing the event connects the source of danger to a credible harmful outcome and helps identify controls that prevent contact or reduce its consequences.

STUDY QUESTION 13

A delivery route assessment asks how probable it is that a vehicle will enter an occupied walkway. What is being estimated?

  1. Consequence
  2. The inspection’s page count
  3. The cost of a penalty
  4. Likelihood

Correct answer: Likelihood

Likelihood concerns the chance of the defined hazardous event occurring. It should reflect relevant exposure and current controls. Consequence concerns the outcome if the event occurs; keeping these ideas separate improves the reasoning behind an assessment.

STUDY QUESTION 14

An assessment considers whether contact with a moving vehicle could result in bruising, serious injury or death. What is this describing?

  1. The chance that a driver will arrive late
  2. The date of the next audit
  3. Consequence
  4. The frequency of deliveries

Correct answer: Consequence

Consequence describes the harm or loss that could follow a hazardous event. Assessors should consider credible outcomes for the actual circumstances. A severe potential outcome can remain possible even where controls reduce the likelihood of the event.

STUDY QUESTION 15

Two jobs could cause equally serious harm, but one creates much more frequent uncontrolled exposure. Why may their risks differ?

  1. Exposure never affects risk
  2. Risk considers likelihood as well as consequence
  3. Risk is determined only by the job title
  4. Equal consequences always mean equal risks

Correct answer: Risk considers likelihood as well as consequence

Risk combines how likely the event is with the consequences it could have. Similar potential harm does not make all situations equally risky. Exposure, conditions and the reliability of controls affect the likelihood and should inform the assessment.

STUDY QUESTION 16

What is the main purpose of examining a work activity before people start it?

  1. Identify possible harm and decide whether protection is sufficient
  2. Produce a list of people to blame later
  3. Predict the exact date of the next accident
  4. Replace every operating instruction with a score

Correct answer: Identify possible harm and decide whether protection is sufficient

Risk assessment is a structured examination of what could cause injury or ill health and whether suitable precautions are in place. Its value is the decision and resulting protection. It is neither an exact prediction nor simply a form-filling exercise.

STUDY QUESTION 17

A team is about to assess a new packing process. Which task should come first?

  1. Choose a final residual score
  2. Sign off the completed findings
  3. Schedule a review without examining the work
  4. Identify the hazards and how people could be harmed

Correct answer: Identify the hazards and how people could be harmed

The team first needs to understand the activity, its hazards and those exposed. Estimating and evaluating risk depend on that information. Starting with a preferred score or a signature reverses the reasoning and can conceal important hazards.

STUDY QUESTION 18

Once the hazards and people exposed are understood, what does estimating risk involve?

  1. Assume the newest employee faces no risk
  2. Choose controls without considering the harm pathway
  3. Consider the likelihood and credible consequences of the events
  4. Decide the document’s final colour scheme

Correct answer: Consider the likelihood and credible consequences of the events

Estimating risk considers the defined hazardous event, its likelihood and the consequences. The evidence should include actual working conditions and existing controls. The estimate supports decisions; a number without a stated scenario and reasoning is much less useful.

STUDY QUESTION 19

What question belongs to the evaluation stage of an assessment?

  1. Can the review replace the initial examination?
  2. Are the existing precautions sufficient, or is further action required?
  3. Which font should the assessor use?
  4. Can the hazard list be omitted?

Correct answer: Are the existing precautions sufficient, or is further action required?

Evaluation uses the estimate, relevant standards and the actual controls to judge whether more needs to be done. It should lead to proportionate action. A low numerical result cannot override an applicable requirement or an essential missing safeguard.

STUDY QUESTION 20

Which sequence gives the most coherent assessment process?

  1. Identify hazards, estimate risk, evaluate risk, record findings, review
  2. Record findings, review, identify hazards, evaluate, estimate
  3. Evaluate, sign off, identify hazards, omit recording
  4. Review, record, choose a score, then decide the activity

Correct answer: Identify hazards, estimate risk, evaluate risk, record findings, review

The sequence builds decisions from an understanding of the work, then records significant findings and revisits them. In practice, assessment is iterative: new information may require an earlier judgement to be changed rather than mechanically following a form.

STUDY QUESTION 21

Which TWO items make recorded assessment findings useful?

  1. Controls and actions, including who must do what
  2. Only a signature and document number
  3. An assurance that conditions can never change
  4. The significant hazards and people who may be harmed

Correct answers: Controls and actions, including who must do what · The significant hazards and people who may be harmed

Useful findings explain the actual risk and the arrangements needed to manage it. Clear actions, responsibilities and review information make the record usable. A signed document without meaningful content does not demonstrate effective control or continued validity.

STUDY QUESTION 22

A production line is changed after its assessment was completed. What should happen?

  1. Keep the old assessment because its signature is recent
  2. Change only the document’s review date
  3. Review the assessment against the changed work and revise controls where necessary
  4. Wait for an injury before reconsidering it

Correct answer: Review the assessment against the changed work and revise controls where necessary

A change in process, equipment or exposure can invalidate earlier assumptions. Review should examine what has changed, consult relevant people and revise arrangements before relying on them. A future calendar date does not make an outdated assessment suitable.

STUDY QUESTION 23

A cleaner’s hands still contact a diluted product occasionally after controls have been introduced. What describes the remaining risk?

  1. The elimination of the hazard
  2. Residual risk
  3. A risk that existed only before controls
  4. A certificate of complete safety

Correct answer: Residual risk

Residual risk is what remains after controls are applied. It needs to be assessed and managed, not assumed to be zero. Proposed controls support only a target residual judgement until implementation and effectiveness have been checked.

STUDY QUESTION 24

A form lists extraction equipment that has been ordered but not fitted. How should its reduced-risk estimate be described?

  1. A target conditional on installation and verification
  2. The proven current risk
  3. Evidence that exposure has already stopped
  4. A reason to remove all interim precautions

Correct answer: A target conditional on installation and verification

An intended improvement is not yet an existing safeguard. Record the present conditions separately from the proposed target, with interim protection and a clear owner. Reassess after checking that the installed control actually performs its intended function.

STUDY QUESTION 25

Which TWO groups should be considered where they could be exposed to the activity?

  1. Members of the public affected by the work
  2. Only people paid directly by the site
  3. Only workers who have previously been injured
  4. Contractors and visitors as well as employees

Correct answers: Members of the public affected by the work · Contractors and visitors as well as employees

Assessments should consider everyone who may be harmed by the activity, including people outside the immediate team. Exposure and relevant individual needs matter more than payroll status. Consultation and observation can reveal interfaces that a narrow employee-only list misses.

STUDY QUESTION 26

A supervisor proposes using the same detailed assessment method for every task, regardless of complexity. What is the better approach?

  1. Use a numerical matrix instead of specialist input in every case
  2. Omit assessment whenever a task is familiar
  3. Use a suitable method and level of detail for the activity and risks
  4. Assume only one assessment method can ever be valid

Correct answer: Use a suitable method and level of detail for the activity and risks

The method and detail should suit the hazards, complexity and decisions required. Simple work may need a straightforward assessment, while specialist risks require appropriate expertise. Familiarity alone is not evidence that the arrangements are sufficient.

STUDY QUESTION 27

What practical business benefit can a well-used assessment provide?

  1. An exemption from consulting workers
  2. More reliable planning and fewer avoidable interruptions
  3. A guarantee that enforcement inspections will stop
  4. Automatic payment of every insurance claim

Correct answer: More reliable planning and fewer avoidable interruptions

Understanding risks can improve planning, reduce disruption and avoid wasted effort. These benefits arise when findings are used to improve work. They do not remove legal obligations, insurance conditions or the need to involve people affected by the decisions.

STUDY QUESTION 28

Workers describe a cleaning step that differs from the written procedure. What should the assessor do?

  1. Examine the actual method and why it differs before deciding controls
  2. Ignore the workers because a procedure already exists
  3. Copy the procedure into the assessment unchanged
  4. Assume every departure is deliberate misconduct

Correct answer: Examine the actual method and why it differs before deciding controls

The assessment needs to reflect work as it is performed, including constraints and variations. Worker knowledge and observation help identify the real exposure pathway. Investigate the difference and establish suitable arrangements rather than treating paperwork as conclusive evidence.

Risk controls

The hierarchy, residual risk, verification and reasonable practicability.

STUDY QUESTION 29

An inspection can be completed from ground level using a suitable remote method. What does this achieve for the climbing task?

  1. Only a warning to climb carefully
  2. Reliance on a harness as the first measure
  3. Transfer of the hazard to the inspection form
  4. Elimination of the need to climb

Correct answer: Elimination of the need to climb

Removing the need for a hazardous activity is the strongest starting point in the hierarchy. Check that the alternative is suitable and does not create significant new risks. Avoiding exposure is generally more reliable than asking someone to cope with it.

STUDY QUESTION 30

A process replaces a hazardous solvent with a suitable less harmful product. Which control approach is this?

  1. Accident investigation
  2. Emergency reporting
  3. Substitution
  4. Personal protective equipment

Correct answer: Substitution

Substitution changes the material or process to reduce the hazard. The alternative still needs assessment for its own hazards, performance and use. A replacement label does not, by itself, prove that exposure is controlled.

STUDY QUESTION 31

A fixed enclosure prevents access to a dangerous drive mechanism. What type of measure is it?

  1. A financial reason for prevention
  2. An engineering control
  3. A reminder to be careful
  4. An absence statistic

Correct answer: An engineering control

Engineering controls change the equipment or physical conditions to prevent exposure. Their effectiveness depends on suitable design, installation, maintenance and use. Instructions and supervision support the guard but cannot substitute for a required physical safeguard.

STUDY QUESTION 32

Which measure relies most directly on people following an instruction?

  1. A rule limiting access to trained operators
  2. Removing the hazardous step
  3. A suitable fixed enclosure
  4. Replacing the process with a less hazardous one

Correct answer: A rule limiting access to trained operators

Rules, procedures and training are important administrative measures, but their effectiveness depends on people understanding and following them. Stronger controls can reduce reliance on individual actions. Good risk management often combines measures rather than relying on instructions alone.

STUDY QUESTION 33

Why should a manager avoid treating PPE as the complete control strategy?

  1. PPE can never reduce harm
  2. PPE automatically protects everyone nearby
  3. Using PPE removes the need to assess exposure
  4. It depends on correct selection, fit, use and maintenance and leaves the source of danger present

Correct answer: It depends on correct selection, fit, use and maintenance and leaves the source of danger present

PPE can provide important protection, but it usually protects the wearer and does not remove the source. Its limitations and dependence on correct use explain its place lower in the hierarchy. Assess stronger options and any necessary combined protection.

STUDY QUESTION 34

When comparing a risk-reduction measure with the sacrifice involved, which TWO selections cover the usual considerations?

  1. Only the manager’s personal preference
  2. Only the previous year’s accident total
  3. Money and time
  4. Effort and inconvenience

Correct answers: Money and time · Effort and inconvenience

Reasonably practicable decisions consider the risk against the sacrifice needed to control it, including money, time, effort and inconvenience. It is not a simple permission to reject a measure because it is inconvenient or because a budget has been spent.

STUDY QUESTION 35

A manager rejects a straightforward safeguard because it costs more than doing nothing. What is wrong with that reasoning?

  1. A low accident count automatically justifies rejection
  2. Any cost is not enough to show that the sacrifice is grossly disproportionate to the risk reduction
  3. All controls must be purchased at any price
  4. Cost can never be considered

Correct answer: Any cost is not enough to show that the sacrifice is grossly disproportionate to the risk reduction

The reasonably practicable test is not a comparison with zero expenditure or a simple budget preference. Consider the risk and the benefit of protection against the sacrifice. Applicable specific requirements and established good practice also need to be respected.

STUDY QUESTION 36

Which order reflects increasing reliance on the individual worker?

  1. Eliminate, substitute, engineer, administer, use PPE
  2. Use PPE, give warnings, then consider elimination
  3. Record an accident, audit it, then identify the hazard
  4. Train, sign a form, and omit physical controls

Correct answer: Eliminate, substitute, engineer, administer, use PPE

The hierarchy prioritises removing or reducing hazards and using physical protection before measures that depend heavily on individual behaviour. The labels describe a planning aid, not permission to omit a necessary lower-level measure where combined protection is needed.

STUDY QUESTION 37

A guard is required for a machine, but a matrix score has been reduced on paper. May the score justify operating without it?

  1. Yes, if the assessor signs the number
  2. Yes, whenever the score is below the chosen band
  3. Yes, if no injury has occurred this month
  4. No; the required safeguard must be addressed before relying on the assessment

Correct answer: No; the required safeguard must be addressed before relying on the assessment

Scoring supports judgement but does not authorise removal of a required safeguard. The assessment must address the actual hazard and applicable requirements. Verify suitable protection and the work-release arrangements rather than using a number as a substitute for control.

STUDY QUESTION 38

After installing a new control, what gives the strongest basis for relying on it?

  1. Ask whether the equipment looks new
  2. Close the action when the purchase order is approved
  3. Check installation and performance during representative work
  4. Keep only the supplier’s invoice

Correct answer: Check installation and performance during representative work

Control effectiveness must be verified in the conditions in which it will be used. Installation, inspection, testing and worker feedback may all be relevant. Purchase and paperwork show progress with an action, but do not establish that exposure has been controlled.

Responsibilities and foreseeability

Common, industry and expert knowledge; duties and legal outcomes.

STUDY QUESTION 39

A wet entrance is likely to become slippery during heavy rain. What makes this a reasonably foreseeable risk?

  1. The manager has calculated the day of the accident
  2. A reasonable person could anticipate the hazard in those conditions
  3. The exact injured person has already been identified
  4. Every possible event must be predicted with certainty

Correct answer: A reasonable person could anticipate the hazard in those conditions

Reasonable foreseeability concerns risks that could be anticipated using relevant knowledge. It does not require prediction of the precise person, date or sequence of an injury. Obvious conditions should prompt proportionate precautions before someone is harmed.

STUDY QUESTION 40

Which example best illustrates common knowledge about a risk?

  1. People may fall if they step into an unprotected opening
  2. A specialist failure mode known only through detailed engineering analysis
  3. A trade-specific publication unavailable outside one industry
  4. A company’s confidential sales forecast

Correct answer: People may fall if they step into an unprotected opening

Common knowledge covers risks an ordinary reasonable person could recognise. Industry and expert knowledge extend that understanding for work requiring more specialised information. A risk need not have caused a previous accident at the organisation to be foreseeable.

STUDY QUESTION 41

A trade body publishes a well-established warning about a process used in its sector. Which knowledge test is most relevant?

  1. Only the injured worker’s personal opinion
  2. A guarantee that the risk is unforeseeable
  3. The organisation’s insurance excess
  4. Industry knowledge

Correct answer: Industry knowledge

Industry knowledge includes recognised experience and information about hazards in a particular sector. Managers should seek and use relevant information for their work. Being unaware of an established warning is not automatically evidence that the risk could not be anticipated.

STUDY QUESTION 42

A specialist engineer is needed to assess a complex pressure-system failure mode. Which knowledge test does this illustrate?

  1. The absence of any foreseeable risk
  2. A reason to replace assessment with guesswork
  3. Expert knowledge
  4. Common knowledge alone

Correct answer: Expert knowledge

Some risks require specialist knowledge to understand their mechanisms and safeguards. Managers should recognise the limits of their competence and obtain appropriate help. Expert input supports decisions and verification; it does not automatically transfer all management responsibility.

STUDY QUESTION 43

Which THREE sources of knowledge help decide whether a risk was reasonably foreseeable?

  1. The belief that no report means no risk
  2. Common knowledge
  3. Relevant industry knowledge
  4. Appropriate expert knowledge

Correct answers: Common knowledge · Relevant industry knowledge · Appropriate expert knowledge

The three tests broaden the information considered beyond one person’s experience. They help identify risks a reasonable organisation should anticipate. Absence of a previous report is not a separate knowledge test and does not establish absence of risk.

STUDY QUESTION 44

An organisation breaches a health and safety duty. Which statement about consequences is sound?

  1. Criminal enforcement and civil compensation may arise through different processes
  2. Only an internal audit can follow
  3. A first offence always attracts no action
  4. Insurance automatically prevents prosecution

Correct answer: Criminal enforcement and civil compensation may arise through different processes

Criminal enforcement concerns breaches of the law, while civil claims can seek compensation for loss or injury. The conditions and outcomes differ. A first offence or an insurance policy does not provide a general exemption from enforcement.

STUDY QUESTION 45

Which is an example of a possible criminal outcome for a qualifying health and safety offence?

  1. Automatic compensation paid to every employee
  2. An inspection being renamed an audit
  3. Guaranteed cancellation of every business contract
  4. A court-imposed fine, and imprisonment where the offence and person permit it

Correct answer: A court-imposed fine, and imprisonment where the offence and person permit it

Penalties depend on the offence, the circumstances and the applicable law. Fines and, for relevant offences and persons, imprisonment are possible criminal outcomes. They should be distinguished from compensation, which belongs to a different legal process.

STUDY QUESTION 46

A worker seeks damages for an injury. Which legal route is most directly concerned with compensation?

  1. An automatic criminal sentence
  2. The routine inspection programme
  3. A civil claim
  4. The internal training attendance list

Correct answer: A civil claim

A civil claim can seek compensation where the relevant legal requirements are met. Criminal proceedings have a different purpose and do not simply replace the claims process. The organisation should preserve evidence and follow appropriate reporting and advice arrangements.

STUDY QUESTION 47

A manager says that appointing a safety adviser removes the employer’s legal duties. What is the best response?

  1. Duties apply only when an adviser is absent
  2. Advice supports compliance; it does not erase the duties of the employer or other dutyholders
  3. The adviser automatically becomes the employer
  4. Only the adviser can be held accountable for any event

Correct answer: Advice supports compliance; it does not erase the duties of the employer or other dutyholders

Employers and other dutyholders retain the duties that apply to them. Competent assistance helps them fulfil those duties, but the appointment itself does not implement controls. Managers still need resources, appropriate decisions and evidence of effective arrangements.

STUDY QUESTION 48

A business operates in more than one jurisdiction. How should a manager approach legal requirements?

  1. Identify the requirements applying to the actual location and activity
  2. Assume every country uses identical regulations
  3. Use an old assessment as the complete legal register
  4. Ask workers to choose whichever requirement is cheapest

Correct answer: Identify the requirements applying to the actual location and activity

The applicable legal framework depends on the location and the work. Great Britain and Northern Ireland, for example, have distinct instruments in relevant areas. Use current authoritative information and competent advice where necessary, rather than treating a generic checklist as complete.

Management systems

Policy, leadership and Plan, Do, Check, Act in practice.

STUDY QUESTION 49

A management team is setting policy, profiling risks and agreeing its objectives. Which PDCA phase is this?

  1. Check
  2. Act
  3. The accident-response phase
  4. Plan

Correct answer: Plan

Planning establishes direction and determines what arrangements are needed for the organisation’s risks. It should connect policy, priorities and resources. The later phases implement the arrangements, measure their performance and use the findings to improve them.

STUDY QUESTION 50

Managers put the agreed work arrangements into practice and provide the resources needed. Which PDCA phase is central?

  1. Check
  2. A substitute for leadership
  3. Do
  4. Act

Correct answer: Do

Do concerns implementing and operating the planned arrangements. People need the equipment, competence, communication and supervision required for those arrangements to function. A completed plan alone does not show that the organisation has reached this stage effectively.

STUDY QUESTION 51

A team collects inspection results and compares control performance with the intended standard. Which PDCA phase is this?

  1. A guarantee that no further action is needed
  2. Check
  3. Plan only
  4. Do only

Correct answer: Check

Check examines whether arrangements are implemented and effective. It uses suitable active and reactive evidence rather than relying only on a policy or on injury totals. Findings should inform review and improvement, including action where safeguards are weak.

STUDY QUESTION 52

Leaders review performance and change arrangements after learning from the evidence. Which PDCA phase is illustrated?

  1. Act
  2. Do only
  3. The initial hazard-identification step only
  4. A replacement for collecting evidence

Correct answer: Act

Act uses the results of monitoring and review to learn and improve. It should lead to decisions, resources and revised arrangements where needed. Repeating an audit without responding to its findings does not complete an effective improvement cycle.

STUDY QUESTION 53

What is the role of a safety and health policy within a management system?

  1. Replace every task assessment
  2. Guarantee that incidents cannot happen
  3. Remove the need to check performance
  4. Set the organisation’s intent and responsibilities, supported by arrangements

Correct answer: Set the organisation’s intent and responsibilities, supported by arrangements

A policy states the organisation’s approach and should be supported by clear responsibility and practical arrangements. It needs implementation and review. The existence of the document is not evidence that every hazard is controlled or every procedure works.

STUDY QUESTION 54

Where does leadership belong in an effective management system?

  1. Only in the safety adviser’s job description
  2. Outside the cycle once tasks have been delegated
  3. Throughout planning, implementation, checking and improvement
  4. Only at the annual policy-signing meeting

Correct answer: Throughout planning, implementation, checking and improvement

Leadership influences priorities, resources and behaviour throughout the management cycle. Managers should support worker involvement, seek competent advice and respond to evidence. Its role is continuous rather than confined to signing a policy or attending a launch meeting.

STUDY QUESTION 55

Why should an organisation profile its risks before choosing its improvement priorities?

  1. To avoid speaking to the workforce
  2. To understand significant exposures and focus attention proportionately
  3. To select only the easiest areas to inspect
  4. To prove that all departments face identical risks

Correct answer: To understand significant exposures and focus attention proportionately

Risk profiling gives leaders a view of the nature and significance of the organisation’s risks. It helps align priorities and resources with exposure. The profile should be informed by actual activities and revised when changes or evidence alter the picture.

STUDY QUESTION 56

Which TWO benefits can a properly implemented management system support?

  1. More consistent control of safety and health risks
  2. Better evidence for meeting relevant legal requirements
  3. An exemption from external scrutiny
  4. A transfer of every manager’s duties to a document

Correct answers: More consistent control of safety and health risks · Better evidence for meeting relevant legal requirements

A management system provides coordinated arrangements for planning, operation, monitoring and improvement. It can support reliable controls and compliance. The benefit depends on implementation and evidence; the system does not remove duties or make external inspection unnecessary.

STUDY QUESTION 57

A company holds a management-system certificate but an essential safeguard is absent. What should the supervisor do?

  1. Use the certificate as permission to continue
  2. Wait until the next certification audit
  3. Assume certification makes the missing safeguard irrelevant
  4. Address the unsafe condition and follow the appropriate hold and escalation arrangements

Correct answer: Address the unsafe condition and follow the appropriate hold and escalation arrangements

Certification or a documented system cannot replace an essential control at the workface. Deal with the actual risk, protect people and escalate through the responsible arrangements. Use the finding to improve the system rather than treating its label as conclusive assurance.

STUDY QUESTION 58

Which practice makes continual improvement credible?

  1. Count every closed action without checking its effect
  2. Retain a permanent list of unresolved findings
  3. Use findings, agree actions and verify whether the changes work
  4. Change the policy cover each year

Correct answer: Use findings, agree actions and verify whether the changes work

Continual improvement needs a feedback loop from evidence to action and verification. Clear ownership and follow-up help turn findings into effective changes. Administrative closure or repeated document revisions alone cannot demonstrate that risk control has improved.

Common workplace hazards

Equipment, substances, ergonomics, the environment and work design.

STUDY QUESTION 59

A rotating gear can catch clothing and draw a hand into its teeth. Which hazard group is most directly involved?

  1. An insurance hazard
  2. Mechanical
  3. Biological
  4. Work-related stress

Correct answer: Mechanical

Moving machinery can entangle, crush, shear or cut. Identify the accessible danger zone, the task and all energy sources. Suitable guarding and safe intervention arrangements are important; simply reminding people to keep clear is often insufficient.

STUDY QUESTION 60

Vapour from a solvent can harm someone who breathes it. Which group is most directly involved?

  1. Chemical
  2. Mechanical only
  3. A financial indicator
  4. An audit category

Correct answer: Chemical

Chemical hazards include harmful substances encountered as vapours, liquids, dusts and other forms. The assessment should consider the actual task and exposure routes. A product label or data sheet informs that assessment but does not complete it.

STUDY QUESTION 61

Contact with infectious material during waste handling is an example of which type of hazard?

  1. A management-system phase
  2. An accident-rate calculation
  3. A mechanical trapping point
  4. Biological

Correct answer: Biological

Biological hazards can involve organisms or material capable of causing infection or other harm. Consider how exposure could occur and the precautions needed for the task. Classifying the hazard is a starting point for assessment, not a control in itself.

STUDY QUESTION 62

Which TWO workplace conditions can contribute to harmful stress?

  1. Only pressures outside work
  2. Any task that includes a planned rest break
  3. Sustained demands beyond the person’s capacity
  4. Poorly designed work with too little meaningful activity

Correct answers: Sustained demands beyond the person’s capacity · Poorly designed work with too little meaningful activity

Both excessive demands and poorly designed underload can contribute to stress. Consider work design, support, control and the individual circumstances. Avoid assuming that someone must be coping because the work appears light or because no complaint has been made.

STUDY QUESTION 63

A team member loses confidence and has difficulty sleeping after repeated bullying at work. What should a manager recognise?

  1. Only physical assault needs a response
  2. These may be warning signs requiring a supportive response and action on the work situation
  3. They prove a particular medical diagnosis
  4. Bullying affects morale but cannot affect health

Correct answer: These may be warning signs requiring a supportive response and action on the work situation

Bullying can affect confidence, sleep and wellbeing. A manager should respond sensitively, follow appropriate reporting and support arrangements, and address the workplace behaviour. Warning signs are a reason to act, rather than a basis for diagnosing someone.

STUDY QUESTION 64

A manager reviews stress caused by unpredictable workloads and conflicting deadlines. Which response addresses the work-related causes?

  1. Review demands, priorities, staffing and support with the team
  2. Treat the problem solely as a lack of resilience
  3. Increase targets before discussing capacity
  4. Tell the team that personal worries are the only possible cause

Correct answer: Review demands, priorities, staffing and support with the team

Work-related stress assessment should examine the conditions of the work. Clarifying priorities, adjusting demands and providing appropriate support may reduce the causes. Individual support can help, but it should not replace action on harmful work arrangements.

STUDY QUESTION 65

A worker reports tingling during repetitive hand-intensive work. What is the appropriate management response?

  1. Diagnose a specific disorder from that symptom alone
  2. Wait for permanent loss of movement
  3. Assume that every report is unrelated to work
  4. Encourage prompt reporting and suitable advice while reviewing the task and exposure

Correct answer: Encourage prompt reporting and suitable advice while reviewing the task and exposure

Tingling or discomfort can be an early warning requiring attention, but does not establish a diagnosis. Review repetition, force, posture and recovery alongside suitable health advice. Early reporting can help identify changes before problems become more severe.

STUDY QUESTION 66

Which TWO selections together cover TILE considerations for manual handling?

  1. Training and Insurance
  2. Temperature and Income
  3. Task and Individual
  4. Load and Environment

Correct answers: Task and Individual · Load and Environment

TILE is a prompt to examine the task, the person, the load and the working environment. It helps avoid focusing only on weight. Use the assessment to avoid hazardous handling where possible and improve the method, equipment or conditions.

STUDY QUESTION 67

A small box must be lifted repeatedly while twisting in a cramped area. Why might the task still present a manual-handling risk?

  1. A training certificate removes the need for assessment
  2. Frequency, posture and available space matter as well as weight
  3. Light loads can never cause harm
  4. Only the box’s purchase price matters

Correct answer: Frequency, posture and available space matter as well as weight

Manual-handling risk depends on the combined task, individual, load and environment. Repetition and awkward postures can create significant strain even with a relatively light object. Review the handling method and whether suitable equipment or layout changes can reduce exposure.

STUDY QUESTION 68

Pedestrians regularly cross a forklift route. Which arrangement generally offers stronger separation than paint alone?

  1. A suitably designed physically separated pedestrian route
  2. A painted line without addressing the crossing
  3. An instruction to make eye contact as the only control
  4. A low injury total on the noticeboard

Correct answer: A suitably designed physically separated pedestrian route

Physical separation can reduce reliance on every driver and pedestrian making the right decision at every encounter. Design must suit crossings, access and the actual vehicle movements. Signs, speed control and visibility may support the arrangement but do not replace suitable separation.

STUDY QUESTION 69

Which TWO actions can help reduce slip risk?

  1. Select footwear suitable for the conditions
  2. Assume footwear alone corrects every floor defect
  3. Ignore lighting because it cannot affect movement
  4. Control contamination and maintain suitable walking surfaces

Correct answers: Select footwear suitable for the conditions · Control contamination and maintain suitable walking surfaces

Prevent contamination where possible, clean effectively and maintain suitable surfaces. Footwear needs to suit the task and conditions as part of the control strategy. Lighting, obstacles and environmental conditions should also be considered rather than treating slips as unavoidable.

STUDY QUESTION 70

A poorly lit route makes obstacles and changes of level difficult to see. What is the suitable lighting principle?

  1. Require the brightest possible light regardless of glare
  2. Treat lighting as unrelated to safety
  3. Provide sufficient suitable lighting, using daylight where practicable and controlling glare
  4. Use daylight alone even when it is inadequate

Correct answer: Provide sufficient suitable lighting, using daylight where practicable and controlling glare

Lighting must suit the work and allow people to see hazards and move safely. Daylight can be useful, but needs supplementing where necessary and managing to avoid glare or excessive contrast. A blanket claim that one source is always best is too simplistic.

STUDY QUESTION 71

Which statement about workroom temperature is most appropriate for a UK workplace assessment?

  1. Temperature matters only after an accident
  2. Consider a reasonable temperature for the activity; the usual guidance differs for strenuous physical work
  3. Every workroom must always be exactly 20°C
  4. A single temperature is suitable for every job and environment

Correct answer: Consider a reasonable temperature for the activity; the usual guidance differs for strenuous physical work

Temperature assessment should reflect the work, conditions and people affected. HSE normally refers to at least 16°C, or 13°C for work involving rigorous physical effort, while other conditions and controls remain relevant. These figures are not a universal comfort guarantee.

STUDY QUESTION 72

Which harm must be considered when someone can contact a live conductor?

  1. Electric shock, with burns and other serious consequences also possible
  2. Only a superficial heat burn
  3. Only damage to the employer’s equipment
  4. A risk that disappears if no spark is visible

Correct answer: Electric shock, with burns and other serious consequences also possible

Electric shock can seriously injure or kill, and electrical faults can also cause burns, fire or other harm. The absence of a visible spark does not show safety. Suitable isolation and competent electrical work arrangements are more reliable than visual reassurance.

STUDY QUESTION 73

Which TWO statements about chemical entry into the body are correct?

  1. Skin contact, swallowing or injection can also be relevant
  2. Chemicals enter only by accidental injection
  3. A pleasant smell proves that inhalation is harmless
  4. Breathing in harmful material can create exposure

Correct answers: Skin contact, swallowing or injection can also be relevant · Breathing in harmful material can create exposure

Exposure routes include inhalation, skin contact or absorption, ingestion and injection, depending on the substance and task. Assess the actual route rather than assuming one route covers every material. Smell and appearance are not reliable measures of protection.

STUDY QUESTION 74

An assessment considers only physical attacks on reception staff. What important aspect of workplace violence may it miss?

  1. The number of printed visitor badges
  2. A guarantee that every visitor is dangerous
  3. Threats and verbal abuse
  4. Only the building’s heating costs

Correct answer: Threats and verbal abuse

Work-related violence can include threats, abuse and physical attacks. Assessment should consider the actual interactions and warning information, then suitable prevention and response arrangements. Restricting the definition to physical injury can miss harmful behaviour and opportunities to intervene.

STUDY QUESTION 75

Which TWO selections contain examples of mechanical injury mechanisms?

  1. Audit findings and annual absence totals
  2. Crushing and shearing
  3. Entanglement and cutting
  4. Stress and social isolation

Correct answers: Crushing and shearing · Entanglement and cutting

Mechanical danger arises from the way moving parts, loads or equipment can contact or trap people. The mechanism matters when selecting guards, safe distances and intervention methods. Injury names alone are not enough without identifying how access and contact could occur.

STUDY QUESTION 76

Why should a hazard review cover substances, equipment, the environment and work organisation?

  1. Different sources of harm need different assessment and control approaches
  2. Only visible moving equipment can harm workers
  3. Every hazard should be controlled solely by PPE
  4. A single hazard label proves the precautions are sufficient

Correct answer: Different sources of harm need different assessment and control approaches

A broad review helps identify immediate injury hazards and health risks that develop over time. Classification can prompt the assessor to look beyond the obvious. The next step is to connect each relevant source to people, exposure, controls and evidence of effectiveness.

Incidents and investigation

Response, reporting, evidence, causes and effective improvement.

STUDY QUESTION 77

A pallet falls beside a walkway without striking anyone. How should the event be treated?

  1. As proof the lifting arrangement is safe
  2. As an event with no learning value because nobody was hurt
  3. As a hazard that can be ignored until someone is injured
  4. As an incident with potential for harm that merits an appropriate response

Correct answer: As an incident with potential for harm that merits an appropriate response

An incident can cause harm or have the potential to do so. An absence of injury may be fortunate rather than evidence of good control. Consider potential severity and the failed safeguards when deciding the response and investigation.

STUDY QUESTION 78

A falling object injures a worker and damages a bench. Which description fits this outcome?

  1. A proactive performance measure
  2. Evidence that investigation is unnecessary
  3. An accident within the wider category of incidents
  4. Only a hazard with no event

Correct answer: An accident within the wider category of incidents

In this revision terminology, an accident is an incident that results in injury or damage. The label helps describe the outcome but does not establish its causes. The immediate response should protect people, followed by appropriate reporting and investigation.

STUDY QUESTION 79

Which event is a near miss?

  1. A planned emergency drill takes place
  2. A load falls where someone had just been standing, causing no injury or damage
  3. A worker sustains a fractured arm
  4. A machine is identified as hazardous before anything happens

Correct answer: A load falls where someone had just been standing, causing no injury or damage

A near miss is an unplanned event without the harmful outcome that could have occurred. Its potential can still be serious. Distinguish an event from a hazardous condition identified during an inspection, and investigate proportionately to the learning and risk.

STUDY QUESTION 80

A worker is injured beside operating equipment. What is the first priority?

  1. Arrange appropriate care and prevent further harm without putting rescuers at risk
  2. Complete witness statements before giving help
  3. Photograph the scene before dealing with an immediate danger
  4. Wait for the investigation team to decide whether help is needed

Correct answer: Arrange appropriate care and prevent further harm without putting rescuers at risk

Immediate response focuses on people and continuing danger. Follow the emergency arrangements, summon appropriate assistance and avoid creating further casualties. Evidence preservation is important, but it must not delay necessary care or urgent action to make the situation safe.

STUDY QUESTION 81

After urgent care and immediate safety measures, why should the scene be protected where practicable?

  1. To prevent anyone from learning what happened
  2. To stop emergency responders entering
  3. To prove a worker is guilty before gathering information
  4. To preserve useful evidence while following reporting and investigation arrangements

Correct answer: To preserve useful evidence while following reporting and investigation arrangements

Preserving the scene can protect evidence about conditions and control failures. It must remain compatible with rescue, preventing further harm and lawful directions. Record necessary changes and follow the organisation’s reporting and investigation arrangements promptly.

STUDY QUESTION 82

Who should receive internal notification of an incident?

  1. Only the person who was injured
  2. Nobody until an insurer requests information
  3. The appropriate manager and people identified in the organisation’s reporting arrangements
  4. Every customer, regardless of relevance

Correct answer: The appropriate manager and people identified in the organisation’s reporting arrangements

Prompt internal reporting allows the organisation to care for people, control continuing risks and arrange investigation. The relevant manager and designated contacts need suitable information. Wider communication should be necessary, authorised and sensitive to privacy, rather than a general broadcast.

STUDY QUESTION 83

Does every workplace incident have to be reported to an enforcing authority?

  1. Only damage to company vehicles can be reportable
  2. No; assess whether the applicable reporting criteria are met
  3. Yes, every near miss must always be reported externally
  4. No incident may be reported unless a worker asks

Correct answer: No; assess whether the applicable reporting criteria are met

External reporting depends on the applicable law, event and circumstances. Internal reporting should still capture relevant events even where regulator notification is not required. Use current official criteria and the responsible reporting arrangements rather than assuming all or no incidents are reportable.

STUDY QUESTION 84

Which TWO communications may be necessary after an incident, according to the circumstances?

  1. Notify the insurer through the appropriate arrangements
  2. Advise the owner of damaged property
  3. Publish an injured person’s health details to the whole workforce
  4. Send every witness account to all customers

Correct answers: Notify the insurer through the appropriate arrangements · Advise the owner of damaged property

Incident response can require communication with an insurer, property owner or other relevant person. Follow designated responsibilities and share only necessary information. Families should be contacted appropriately under emergency arrangements; indiscriminate disclosure is not a substitute for a managed response.

STUDY QUESTION 85

What should be the main purpose of an incident investigation?

  1. Select a person to blame before examining evidence
  2. Produce a report with no need for action
  3. Replace all future risk assessments
  4. Find how and why the event occurred so effective action can prevent recurrence

Correct answer: Find how and why the event occurred so effective action can prevent recurrence

Investigation should identify supported causes and the control improvements needed. It can also support compliance and reduce future losses, but its preventive value depends on learning and action. Starting with blame can discourage reporting and distort the evidence collected.

STUDY QUESTION 86

Which sequence gives a sound structured investigation?

  1. Replace equipment before recording any relevant facts
  2. Share a final conclusion before examining the event
  3. Gather information, analyse it, identify controls, plan and implement action
  4. Choose blame, write conclusions, then find supporting witnesses

Correct answer: Gather information, analyse it, identify controls, plan and implement action

A structured approach moves from information to analysis, controls and implementation. Communication and verification support the process, and new evidence may change conclusions. The investigation should distinguish established facts, uncertainties and assumptions rather than force evidence into an early theory.

STUDY QUESTION 87

A conveyor contact injures a worker. The missing guard at the point of access is described as what in this teaching framework?

  1. A proactive indicator of good performance
  2. An immediate unsafe condition in the event sequence
  3. A financial reason to manage safely
  4. Proof that no management cause exists

Correct answer: An immediate unsafe condition in the event sequence

The immediate event conditions explain what directly allowed contact. Investigation must then ask why that condition existed and persisted. Terminology differs between investigation frameworks, so define the categories being used and keep the factual cause-and-control chain clear.

STUDY QUESTION 88

The missing guard was not detected because the local inspection and supervision arrangements were ineffective. What level of cause is being explored?

  1. An underlying organisational factor
  2. Only the injury outcome
  3. A reason to stop analysing once the worker is named
  4. A measure of the injured person’s pain

Correct answer: An underlying organisational factor

Underlying factors help explain why unsafe conditions or actions were allowed to develop or remain. Here the ineffective local checking arrangements need examination. A useful investigation connects that finding to the wider systems and management decisions that shaped those arrangements.

STUDY QUESTION 89

Repeated machinery problems trace back to a management decision to omit maintenance planning and resources. What is the investigation considering?

  1. Only the colour of the machine
  2. An unavoidable consequence of employing people
  3. A reason that future events cannot be prevented
  4. A root management-system failure

Correct answer: A root management-system failure

Root causes often involve management, organisational or planning weaknesses that allow other failures to arise. Correcting these can prevent more than one recurrence. The conclusion still needs evidence, and it does not remove the need to correct the immediate unsafe condition.

STUDY QUESTION 90

Which TWO benefits can follow a well-completed investigation?

  1. Guarantee that no legal claim can ever be made
  2. Remove the need for ongoing monitoring
  3. Prevent further harm through better controls
  4. Reduce repeat disruption and business losses

Correct answers: Prevent further harm through better controls · Reduce repeat disruption and business losses

Investigation can reveal changes that protect people and avoid repeated disruption. It may also supply information needed for legal or insurance processes. Those benefits depend on implementing and verifying suitable actions; the report itself does not provide immunity or permanent assurance.

Measuring performance and auditing

Proactive/reactive measures, useful indicators and objective audits.

STUDY QUESTION 91

An indicator records the proportion of planned guard checks completed on time. What type of monitoring is it?

  1. A civil compensation measure
  2. Proactive monitoring of a preventive activity
  3. A count of injuries already sustained
  4. A guarantee that every guard works

Correct answer: Proactive monitoring of a preventive activity

Proactive monitoring examines preventive arrangements and activities before harm occurs. Completion of checks is useful information, but also consider their quality and findings. An activity count on its own does not establish that the controls are effective.

STUDY QUESTION 92

A dashboard shows the number of injuries and cases of work-related ill health recorded last year. What does this measure?

  1. Reactive outcomes
  2. Only the quality of preventive inspections
  3. The future date of the next incident
  4. Proof that all unreported events are harmless

Correct answer: Reactive outcomes

Reactive indicators describe outcomes that have already occurred. They can show patterns and prompt investigation, but must be interpreted with exposure and reporting quality. Use them alongside information about the condition and performance of preventive controls.

STUDY QUESTION 93

A site celebrates 200 days without a reported injury. How should that figure be classified?

  1. A proactive test of each critical control
  2. A complete assessment of future serious-harm risk
  3. A reason to stop encouraging near-miss reports
  4. A reactive outcome measure, not proof that all safeguards are reliable

Correct answer: A reactive outcome measure, not proof that all safeguards are reliable

Days without a reported injury is based on past outcomes. It may be encouraging, but does not directly test safeguards or show what has gone unreported. Continue checking important controls and maintaining confidence in reporting rather than relying on the number alone.

STUDY QUESTION 94

Which TWO characteristics make an indicator useful for a particular organisation?

  1. It must be identical for every organisation
  2. It is chosen because it is difficult to interpret
  3. It is relevant, objective and clear enough to measure
  4. The information is worth the effort needed to collect it

Correct answers: It is relevant, objective and clear enough to measure · The information is worth the effort needed to collect it

Indicators should answer useful questions about the organisation’s own risks and arrangements. Clear definitions improve comparability, while proportionate collection keeps the effort worthwhile. Copying another organisation’s measure without considering relevance can create impressive data with little decision value.

STUDY QUESTION 95

A training indicator counts certificates but ignores whether workers can perform the safety-critical task. What improvement would make it more useful?

  1. Assume attendance proves every control is effective
  2. Include appropriate evidence of practical competence and application
  3. Increase the certificate target and ignore performance
  4. Replace training with injury statistics only

Correct answer: Include appropriate evidence of practical competence and application

Training completion can be a proactive measure, but it is not the same as demonstrated competence. Check whether learning is suitable, understood and applied in the task. The indicator should help managers decide whether the intended protection is actually supported.

STUDY QUESTION 96

Reported incidents fall after employees say they fear criticism for reporting. What should the manager question?

  1. Whether the lower count reflects reduced reporting rather than safer work
  2. Whether all hazards have now been eliminated
  3. Whether proactive checks can stop
  4. Whether every earlier report was unnecessary

Correct answer: Whether the lower count reflects reduced reporting rather than safer work

A change in reporting behaviour can alter the apparent trend without changing exposure. Examine reporting confidence, work conditions and control evidence. Treat the count as information to interpret, rather than automatically rewarding a reduction that may hide problems.

STUDY QUESTION 97

What is an audit seeking when it evaluates a safety management system?

  1. A guarantee that no accident can ever happen
  2. Only an attractive policy front cover
  3. A replacement for every workface inspection
  4. Objective evidence against defined criteria, policy and arrangements

Correct answer: Objective evidence against defined criteria, policy and arrangements

An audit uses evidence to evaluate whether arrangements meet relevant criteria and are implemented effectively. Documents, interviews and observed practice may all contribute. A policy’s existence alone is insufficient, and sampling means the audit has a defined scope and limits.

STUDY QUESTION 98

Employees audit their own organisation using suitable competence and impartiality arrangements. What type of audit is this?

  1. A criminal investigation
  2. An exemption from independent review
  3. Internal audit
  4. Automatically an external audit

Correct answer: Internal audit

Internal audits are conducted within the organisation to evaluate its arrangements. Competence, suitable independence from the work examined and objective evidence remain important. Being internal does not make an audit informal or remove the need for defined criteria and follow-up.

STUDY QUESTION 99

An independent third party examines an organisation’s management arrangements for relevant stakeholders. What type of audit is this?

  1. A substitute for correcting a known unsafe condition
  2. External audit
  3. An internal inspection by the same supervisor
  4. A guarantee that managers are no longer accountable

Correct answer: External audit

An external audit provides a view from outside the organisation against an agreed scope and criteria. It can support stakeholder assurance but does not transfer management duties or prove that every risk is controlled. Findings still require proportionate action and verification.

STUDY QUESTION 100

A review finds that agreed corrective actions were marked complete without checking whether protection improved. What is the best next step?

  1. Verify effectiveness, resolve remaining risks and use the findings to improve arrangements
  2. Keep the closure figures because the deadline was met
  3. Stop consulting workers about the actions
  4. Treat the action spreadsheet as sufficient evidence

Correct answer: Verify effectiveness, resolve remaining risks and use the findings to improve arrangements

Monitoring, assessment and review should lead to effective improvement. Check whether actions were implemented and whether they address the identified risk. Worker feedback and appropriate observations or tests can reveal a gap between administrative closure and a control that really works.

YOUR SHARE STUDY GUIDE

Managing safety at work — SHARE study guide and workbook

Edition 6 · 27 October 2026 · 183 pages · fillable PDF

Use the explanations, worked examples, diagrams, revision questions and response spaces alongside your exam practice and workplace risk assessment preparation. Save a local copy before entering your notes.

Available through your assigned IOSH learner area. Sign in using your course account. This is original SHARE companion teaching; use your approved provider’s current IOSH materials and assessment instructions for the formal course.

Official further reading