SHAREhub
PROCESS SAFETY AWARENESS · SH-PSA-04

Reviewing and controlling process changes

Reviewing and controlling process changes — workplace learning illustration
Illustrative workplace context for this course.

Recognise change triggers and follow their dependencies through review, readiness and closure.

Free training · Approx. 65–100 minutes

Public teaching and practice are free. Use a free learner account in Moodle for confirmed saves and recorded assessment. A certificate of completion depends on completing the required learning, scoring at least 80% and answering every critical safety question correctly.

Open in the LMS →Try the interactive practice

Your practical case

A fictional works proposes a revised transfer arrangement using a substitute component and combined roles. You trace the proposal through its evidence, temporary conditions and pre-start decision.

Operators, supervisors, maintenance staff, contractors and managers who need independent process-safety awareness; practical roles remain subject to employer competence and authorisation.

Independent SHAREhub process-safety awareness. Selected learning maps to a numbered process-safety syllabus topic; this is not the NEBOSH qualification, approved provision, specialist design instruction or work authorisation. GB guidance is distinguished from corresponding NI requirements; establish applicability for the actual jurisdiction and establishment.

What you will learn

Course outline

Recognise and screen

  1. Recognise more than hardware changeIdentify changes to people, materials and procedures.
  2. Test a like-for-like claimExamine equivalence against function and conditions.
  3. Start from the current design basisIdentify dependencies before judging the proposal.

Review the changed basis

  1. Compare options deliberatelyAvoid introducing a new hazard while reducing another.
  2. Control temporary arrangementsIdentify expiry, restrictions and restoration.

Temporary and organisational change

  1. Keep urgency within controlDistinguish expedited review from bypassed review.
  2. Review organisational dependenciesRecognise competence and workload effects.
  3. Separate proposal from approvalCheck the scope and conditions of an authorisation.

Authority and readiness

  1. Verify what was actually installedCompare the implemented arrangement with the approved scope.
  2. Respect pre-start hold pointsIntegrate equipment, information and people readiness.

Information and close-out

  1. Make the change survive handoverKeep controlled information aligned with actual work.
  2. Close with evidence, not elapsed timeIntegrate operation, monitoring and final records.

Practise and test your reasoning

12 lesson decisions and 6 required activities use evidence sorting, matching, sequencing, branching choices and applied checks. Dragging has equivalent labelled controls. The 20-question final assessment requires 80% and every critical answer, after all learning requirements are complete.

Use the linked risk assessment, toolbox talk, policy and assurance resources with their included fictional exercises. Points and module badges help show progress; they do not replace the assessment requirements.

Duration estimates include teaching, activities, checks and assessment. Your pace and retries may vary.

Sources and scope

Independent awareness study · PSM topic 1.4. Independent SHAREhub learning; this is not the NEBOSH qualification.

Knowledge Hub topic coverage

Read the lesson source references

Presentation and model workshop

Use the same course imagery, worked decisions and historical case in a 28-slide teaching companion. Practise classification, compare explained choices and inspect the linked model case.

Open the interactive presentation workshop · Download PowerPoint

This optional companion does not replace the required course activities or final assessment.