Optional presentation practice. Choices and model launches do not write LMS grades, completion or certificates.
Recognise reaction instability and the evidence needed for a defensible basis of safety without attempting process design.
Some reactions generate heat. If heat generation exceeds the ability to remove it, temperature can rise and the reaction can accelerate. Gas generation or decomposition may add pressure. A vessel that appears quiet does not establish that its contents are chemically stable.
This separate inert demonstrator represents a hypothetical exothermic batch process. Its exercise trend shows heat removal falling while heat generation accelerates; no reaction occurs in the fuel terminal.
Material identity, composition and the intended charging arrangement are part of the assessed reaction basis. A wrong ingredient, contamination or changed addition sequence can affect heat generation, gas formation or accumulation of unreacted material. Similar labels do not establish equivalence.
Temperature can rise when heat is generated faster than it is removed. For a heat-releasing reaction, rising temperature can then increase the reaction rate and heat generation further.
A proposed batch is described as safe solely because its usual temperature display is low.
A single normal indication does not establish stability under foreseeable loss of control.
A batch has a state, history and authorised next step. Hold points connect the process information to decisions about readiness, addition, treatment and onward transfer. An unsigned line in a record is not merely an administrative inconvenience if it represents a missing control decision.
In a real reactive process, temperature can accelerate the reaction and generate heat or gas faster than it can be removed, causing runaway and overpressure.
Keep this model non-operating; in the hypothetical case follow the independently designed emergency response and protected safe state, not an improvised cooling or venting action.
Sampling or opening equipment can expose people to pressure, heat and hazardous contents, including material that remains reactive. A routine sample point is still part of a process with a current state. Familiarity with the location does not establish safe conditions.
Raw-material suppliers, concentration, catalyst, addition arrangements and equipment changes can challenge the original basis of safety. A change that improves product quality may still affect reaction stability or protective requirements. Performance success is not the same as hazard acceptance.
Return to the same fictional model case. Select the evidence needed before relying on the control.
For the hypothetical plant, review credible failure testing, reaction data and engineered protective duty; demonstrate the response safely by simulation rather than conducting a live runaway.
A runaway reaction destroyed the reactor. CSB testing identified inadequate cooling as the credible initiating failure and highlighted weaknesses in understanding the reaction hazards.
Apply the learning from T2 Laboratories, 19 December 2007 to the current task.
Review reaction data, heat removal, accumulation and credible cooling loss.
Use the full course for detailed teaching, required activities and the separate final assessment. Presentation choices are practice and do not write LMS grades or completion.
The PowerPoint contains the presentation and notes. Enable JavaScript for the online choices and classification activity.