Chemical storage, compatibility and accidental mixing
Approximately 50–77 minutes
Workplace awareness and prevention. Specialist competence, statutory examinations and work authorisation require separate evidence. Check the relevant UK nation and actual workplace arrangements. Completion does not establish practical competence, authorise hazardous work or award an external qualification.
Read the complete core teaching here. Use the interactive course for required activities, saved assessment and conditional completion.
Look at combinations
Chemical hazard pictograms · examples and checksOptional reference · all nine symbols · does not change assessment requirements
READ THE LABEL · UNDERSTAND THE TASK
Recognise the symbol. Read the full label. Assess the actual task.
Examples illustrate possible uses of a symbol, not the classification of every formulation. A product can carry several pictograms. Check its current label, hazard statements and matching safety data sheet (SDS).
Compatibility: a shared pictogram does not mean two chemicals are compatible.
CLP/GHS hazard pictograms: meanings and illustrative examples
Pictogram and hazard
What it can mean
Example and question before work
ExplosiveGHS01
Explosion, blast or projection hazards; also certain self-reactive substances and organic peroxides.
Example: Certain fireworks or reactive chemical products.Ask: Does the authorised task account for impact, heat and the product’s stability limits?
FlammableGHS02
Can ignite; also used for certain self-heating, pyrophoric or water-reactive hazards.
Example: Petrol or some solvent-based products.Ask: What could release vapour or ignite it during this task, including nearby work?
OxidisingGHS03
Can cause or intensify fire; some strong oxidisers present an explosion hazard.
Example: Oxygen or certain oxidising chemicals.Ask: What incompatible materials and contamination must the assessed storage and connection keep apart?
Gas under pressureGHS04
Pressurised gas may burst if heated; refrigerated gas can cause cold burns.
Example: Compressed-gas cylinders.Ask: Have the gas identity, cylinder, connection and pressure or temperature hazards been checked?
CorrosiveGHS05
May damage metals, cause severe skin burns or cause serious eye damage; read the stated hazard.
Example: Certain drain cleaners, acids or alkalis.Ask: Which contact and splash routes must be prevented in this actual handling or dilution task?
Acute toxicityGHS06
Can be toxic or fatal after short exposure through the stated route.
Example: Methanol or certain pesticide products.Ask: Which exposure routes and emergency arrangements does this product’s information identify?
Harmful / irritantGHS07
May indicate harmful acute toxicity, irritation, skin sensitisation, drowsiness or dizziness; also ozone-layer hazards.
Example: Some detergents or cleaning products.Ask: What do the hazard statements say? Do not dismiss this as a harmless or mild product.
Serious health hazardGHS08
Can indicate cancer, genetic or reproductive harm, organ damage, respiratory sensitisation or aspiration hazard.
Example: Petrol or some sensitising chemical products.Ask: Which particular health effect is stated, and how does the task prevent the relevant exposure?
Hazardous to the environmentGHS09
Hazardous to aquatic life, potentially with long-lasting effects.
Example: Certain pesticides, biocides or fuels.Ask: How will the assessed arrangements prevent release to drains, water or soil?
Read beyond the picture · Open a prompt to compare the explanation.
Is the exclamation mark the same as the chest-starburst symbol?
No. The two symbols communicate different groups of hazards. Read the actual hazard statements: skin sensitisation and respiratory sensitisation are not interchangeable, and neither symbol specifies the complete task controls.
Does a bottle with no pictogram prove the task is safe?
No. Work may generate hazardous dust, fume or mist, and exposure depends on the task. Resolve missing or conflicting identification before use. A pictogram is not a compatibility chart or a complete workplace risk assessment.
Which information turns recognition into a useful work decision?
Match the product and SDS revision. Read the hazard statements and relevant SDS sections for handling, storage, exposure control, emergencies and reactivity together. Then check the actual task assessment and controls. A safety data sheet is not itself a COSHH assessment.
Fisher Scientific UK · BP2618 range · CAS 67-63-0 Revision 19 · 13 October 2023
This learning example refers to the identified supplier edition. It is not a replacement SDS or confirmation that this is the latest sheet for a product you hold. Obtain the current matching supplier SDS before real use.
Below is SHARE’s learning annotation, not a rebranded supplier document or a complete safety data sheet.
Identity
Propan-2-ol / isopropanol; the referenced sheet identifies a laboratory-grade product.
Section 2 signals
Danger; flame and exclamation-mark pictograms. H225, H319 and H336 identify flammability, eye irritation and possible drowsiness/dizziness.
Section 3 composition
The referenced sheet lists isopropyl alcohol above 95% by weight.
Section 8 decision
Engineering measures and several glove-material options appear. Check the complete conditions; no single glove or respirator is selected by this lesson.
Section 9 example
A 12°C closed-cup flash point is listed. This is product data, not a workplace exposure reading or an automatic safe-temperature limit.
Explore every section
1. Identification
Match the product, supplier, intended use and emergency contact to the actual container. A familiar chemical name alone may not identify a formulation.
2. Hazards identification
Read classification, pictograms, signal word and hazard/precautionary statements together. Identify the routes and outcomes the task must prevent.
3. Composition / ingredients
Check concentration and relevant ingredients. A diluted mixture, hardener or changed formulation may need different information and assessment.
4. First-aid measures
Prepare product-specific first-aid arrangements and ready access to the full sheet. Do not replace the workplace emergency procedure with a memory exercise.
5. Firefighting measures
Provide the relevant information to the site fire-planning route. An SDS does not authorise an untrained worker to fight a chemical fire.
6. Accidental release
Plan who raises the alarm, isolates the area and deals with a spill within their training. Confirm available equipment and the boundary for specialist help.
7. Handling and storage
Translate the supplier conditions into the actual transfer, storage, access and housekeeping method. Consider other work and incompatible neighbours.
8. Exposure controls / PPE
Read exposure limits, engineering controls and residual PPE together. Check jurisdiction, units and averaging period. Verify control performance and exact glove/RPE suitability.
9. Physical / chemical properties
Consider volatility, flash point, state and other relevant properties at the actual temperature and method. Odour is not a reliable exposure measurement.
10. Stability / reactivity
Identify incompatible materials, conditions to avoid and possible decomposition. Check the whole process and waste stream, not just separate containers.
11. Toxicological information
Connect the health effects to possible inhalation, skin, eye and ingestion exposure. Use competent advice where specialist interpretation is needed.
12. Ecological information
Plan to prevent environmental release, including drains and water. Lack of a fish/tree symbol does not grant permission to discharge.
13. Disposal considerations
Specify the responsible waste route for the product, contaminated materials and containers. Do not assume evaporation or dilution is an acceptable disposal method.
14. Transport information
Check transport classification through the relevant competent route. Supply pictograms and transport labels have different functions.
15. Regulatory information
Identify relevant restrictions and market scope, then check workplace duties separately. A regulatory entry is not a completed COSHH assessment.
16. Other information
Check revision history, abbreviations and supporting statements. Trace material changes into the assessment, instructions, storage and briefing.
Worked COSHH application · fictional laboratory proposal
Define the proposed use
Fictional laboratory task: wipe small parts for 10 minutes twice per shift, using a proposed 50mL working quantity at ambient temperature. Record the exact product, method, location, people and frequency. These are exercise assumptions, not authorised operating limits.
Find the exposure and application differences
Compare a controlled dispensing/wiping proposal with spraying the same liquid over an open surface near other work. Spray, surface area, ventilation, duration, splashes and nearby people change the assessment even though the SDS is unchanged. Confirm the proposed use is suitable.
Work through the control hierarchy
First ask whether the task can avoid the chemical or use a verified safer method. If it remains necessary, assess release prevention, suitable dispensing, enclosure or ventilation before residual PPE. Do not invent a dilution or declare a small quantity safe.
Specify and verify the real controls
Use sections 7–10 together with competent task assessment. Identify ventilation performance, compatible equipment and the exact glove selection/breakthrough evidence for the job. Consider fire and explosion controls alongside health exposure. Do not copy a generic PPE line and call the work controlled.
Plan the whole job
Include setup, transfer, use, cleaning, storage, waste, maintenance and foreseeable upset. Identify who is exposed, who owns each action, training, first aid, spill arrangements and the separate emergency response boundary.
Record, brief and review
Record significant findings, remaining actions and evidence needed before release. Check controls in use. Reassess for changed product, concentration, quantity, temperature, spraying, location, equipment, symptoms, incidents or new supplier information.
Worked decision: HOLD the proposed task until the matching product/use information, exposure and ignition assessment, control verification and emergency arrangements are resolved by the responsible competent people. This learning example does not issue an operational assessment or authorise work.
Professional teaching illustration. Read the written scenario for the facts; the image is not evidence of a real workplace.
Products that are manageable separately may react dangerously when mixed. Common cleaning products can release hazardous gases if combined. Use supplier information and competent assessment for actual chemicals, concentrations, containers and waste; do not infer compatibility from colour or product name.
What is chemical compatibility and inadvertent mixing?
Chemical compatibility is the safe relationship between substances, and inadvertent mixing is the accidental combination of substances that should have been kept apart. Compatibility is not simply whether two products sit on the same shelf without reacting. It includes storage, handling, transfer, use, cleaning, waste disposal, drainage, emergency response and foreseeable abnormal situations such as leaks, wrong deliveries, overfills, rainwater ingress and equipment failure. Inadvertent mixing can happen in ordinary workplaces: a cleaner mixes bleach and acid descaler, a worker pours waste into the wrong container, or a contractor uses an unapproved product in a drain.
It can also happen in process industries: a road tanker connects to the wrong fill line, a transfer route is mis-valved, or incompatible waste is bulked in a tank. The management task is to make the right action easier than the wrong one. That means clear naming, different connections, segregated storage, dedicated containers, locked or interlocked routes, independent verification and a culture where uncertainty stops the job.
Fictional workplace decision
Fictional case — A store contains partly identified cleaning products. To save space, a worker proposes combining leftovers in one container without an approved method or reliable product information.
Compare the reasoning
Do not combine the partly identified leftovers or test compatibility through a small trial mixture. Establish reliable product identity and information, then use an assessed storage, use and disposal route. Saving space is not evidence that substances or residues can be mixed safely; unresolved identity remains a matter for competent escalation.
Existing SHAREhub photographic illustration. The fictional case supplies the task and decision evidence.
Products that are manageable separately may react dangerously when mixed. Common cleaning products can release hazardous gases if combined. Use supplier information and competent assessment for actual chemicals, concentrations, containers and waste; do not infer compatibility from colour or product name.
What is chemical safety at work?
Chemical safety is the practical system used to prevent people, property and the environment being harmed by chemicals and substances hazardous to health. Good chemical safety starts before a substance is purchased. A business should ask whether the substance is needed, whether a safer option exists, what it will be used for, who will use it, how exposure could occur and how the substance will be stored, moved, controlled and disposed of. The term chemical should be read broadly. It includes cleaning products, paints, adhesives, fuels, solvents, acids, alkalis, resins, disinfectants, laboratory reagents, process chemicals and substances generated by work such as welding fume, wood dust, silica dust, metalworking fluid mist or diesel exhaust.
A strong page or system should not stop at the label. It should connect classification, toxicology, fire and reaction hazards, exposure route, work method, control reliability, maintenance, emergency planning, training and evidence.
Fictional workplace decision
Fictional case — A store contains partly identified cleaning products. To save space, a worker proposes combining leftovers in one container without an approved method or reliable product information.
Compare the reasoning
Do not combine the partly identified leftovers or test compatibility through a small trial mixture. Establish reliable product identity and information, then use an assessed storage, use and disposal route. Saving space is not evidence that substances or residues can be mixed safely; unresolved identity remains a matter for competent escalation.
What can fuel-transfer interfaces teach about incompatible mixing?
Look at combinations
Identify compatibility questions
Existing SHAREhub photographic illustration. The fictional case supplies the task and decision evidence.
Products that are manageable separately may react dangerously when mixed. Common cleaning products can release hazardous gases if combined. Use supplier information and competent assessment for actual chemicals, concentrations, containers and waste; do not infer compatibility from colour or product name.
What can fuel-transfer interfaces teach about incompatible mixing?
Trace the receiving path and selected product before considering transfer controls. A plausible hose connection does not establish compatibility or correct product identity. During the proposed tanker delivery, product enters the receiving tank and displaced vapour returns to the tanker by a separate path. The delivery-hose teaching envelope follows the connected hose route. Activity focus: Trace the tanker connection, product hose and receiving fill before following the Stage 1b vapour-return path. Inspect the whole delivery working area, including nearby traffic, dispensers and drainage. Contextual workplace scene.
Use the task, control and evidence checks in this section; appearance alone does not establish safe conditions, individual health or approval. Follow petrol from bulk storage into the tanker and the separate displaced-vapour route from the tanker to the terminal VRU. Activity focus: Distinguish the product line, vapour collection line and tanker-loading protective controls. Contextual workplace scene. Use the task, control and evidence checks in this section; appearance alone does not establish safe conditions, individual health or approval. Educational illustration, not to scale. Coloured zones are teaching examples, not a site-specific hazardous-area classification.
Basis and limits: Unloading petrol from road tankers: L133 · Petrol dispensing premises: DSEAR risk assessments, GN75 · Defra: storage, unloading and loading petrol at terminals — PG1/13(13) · Functional safety: SIS, alarms and basic process control · Overfill of vapour recovery units: safety notice
Fictional workplace decision
Fictional case — A store contains partly identified cleaning products. To save space, a worker proposes combining leftovers in one container without an approved method or reliable product information.
Compare the reasoning
Do not combine the partly identified leftovers or test compatibility through a small trial mixture. Establish reliable product identity and information, then use an assessed storage, use and disposal route. Saving space is not evidence that substances or residues can be mixed safely; unresolved identity remains a matter for competent escalation.
Existing SHAREhub photographic illustration. The fictional case supplies the task and decision evidence.
Maintain correct labels, suitable containers and assessed separation. Avoid decanting into drink bottles or unlabelled containers. Consider how leaks could mix in shared containment and how deliveries, returns or waste could bypass normal checks.
How should chemical safety be assessed?
Chemical safety should be assessed by identifying substances, tasks, exposure routes, people exposed, health effects, fire or reaction hazards and the controls needed to prevent harm. A good assessment starts with a chemical inventory and task review. List what is used, generated or stored, then look at the task: quantity, concentration, temperature, duration, frequency, method of application, ventilation, nearby people, maintenance activities, cleaning and waste. The assessment should separate hazard from risk. A substance can be hazardous but low risk if it is sealed in a closed system with no credible exposure.
A lower-hazard product can become higher risk if sprayed, heated, used for long periods or used in a poorly ventilated space. The assessment should also cover foreseeable abnormal situations: spills, wrong chemical added, failed extraction, missing RPE, incompatible storage, contractor use, emergency cleaning, unlabelled containers, damaged packaging and waste accumulation.
Fictional workplace decision
Fictional case — A store contains partly identified cleaning products. To save space, a worker proposes combining leftovers in one container without an approved method or reliable product information.
Compare the reasoning
Do not combine the partly identified leftovers or test compatibility through a small trial mixture. Establish reliable product identity and information, then use an assessed storage, use and disposal route. Saving space is not evidence that substances or residues can be mixed safely; unresolved identity remains a matter for competent escalation.
Professional teaching illustration. Read the written scenario for the facts; the image is not evidence of a real workplace.
Maintain correct labels, suitable containers and assessed separation. Avoid decanting into drink bottles or unlabelled containers. Consider how leaks could mix in shared containment and how deliveries, returns or waste could bypass normal checks.
How should chemical compatibility be assessed?
Compatibility should be assessed by reviewing the chemical inventory, SDS information, reaction hazards, storage locations, transfer routes, drains, waste streams and credible mixing scenarios. Start with the inventory. List all chemicals, wastes, residues, cleaning chemicals, intermediates, off-spec materials and process fluids. Then identify what could meet what: shelves, bunds, drains, hoses, fill points, waste containers, shared equipment, cleaning routines and emergency response materials. The SDS is important, especially sections on handling, storage, stability and reactivity, but it does not know your pipework, drain route, container choices or work sequence.
A site-specific compatibility review should connect the SDS with the physical workplace. For higher-risk operations, create credible scenarios: acid into hypochlorite tank, oxidiser into solvent waste, wrong road tanker connection, incompatible drain discharge, cleaning chemical into process residue, rainwater into water-reactive store, or waste drum bulking error.
Fictional workplace decision
Fictional case — A store contains partly identified cleaning products. To save space, a worker proposes combining leftovers in one container without an approved method or reliable product information.
Compare the reasoning
Do not combine the partly identified leftovers or test compatibility through a small trial mixture. Establish reliable product identity and information, then use an assessed storage, use and disposal route. Saving space is not evidence that substances or residues can be mixed safely; unresolved identity remains a matter for competent escalation.
How can the ISO 45001 hierarchy of controls reduce risks while charging bagged powder into a mixer?
Control storage and transfer
Plan controlled storage and transfer
Existing SHAREhub photographic illustration. The fictional case supplies the task and decision evidence.
Maintain correct labels, suitable containers and assessed separation. Avoid decanting into drink bottles or unlabelled containers. Consider how leaks could mix in shared containment and how deliveries, returns or waste could bypass normal checks.
How can the ISO 45001 hierarchy of controls reduce risks while charging bagged powder into a mixer?
Chemical exposure should be controlled by eliminating or substituting hazards, enclosing processes, controlling emissions at source, using safe systems and adding PPE only where residual risk remains. ERICPD helps keep control thinking practical. Eliminate the chemical or task where possible. Reduce risk through safer substitutes, lower concentration, smaller quantities, pellets instead of powder, lower temperature or shorter exposure. Isolate people using enclosures, segregation and restricted access. Control emissions using LEV, closed transfer, automation, cleaning and emergency systems. PPE and RPE then protect against remaining exposure.
Discipline keeps the controls used, maintained and checked. Control also needs to match the route of exposure. LEV will not protect skin from a corrosive liquid. Gloves will not control vapour. A respirator will not make incompatible storage safe. Good chemical safety often needs several layers working together. The standard should be good practical control, not paperwork compliance. If the work still smells strongly of solvent, creates visible dust, leaves chemical residue on benches, relies on torn gloves or has workers unsure what to do in a spill, the control system is not mature.
Choose the activity that matches the work. Each has its own controls, verification and stop/restart decisions; ERICPD and ISO 45001 are alternative views of that same activity. A maintenance team cleans known oily components before assembly; identify solvent, contamination, ignition and skin-contact hazards. ERICPD is a planning crossmap. Its prompts do not add a sixth rung or rank Isolate above engineering. Discipline verifies and sustains every control level. The hierarchy of controls in ISO 45001:2018 comes under Clause 8.1.2 (Eliminating hazards and reducing OH&S risks), which is located within Clause 8 ("Operation").
ESEAP: Elimination, Substitution, Engineering controls, Administrative controls and PPE. Control order: HSE hierarchy of controls and IOSH hierarchy of control guidance. An operator empties identified powder ingredients into a mixer; assess inhalation, skin contact and any combustible-dust hazard. ERICPD is a planning crossmap. Its prompts do not add a sixth rung or rank Isolate above engineering. Discipline verifies and sustains every control level. The hierarchy of controls in ISO 45001:2018 comes under Clause 8.1.2 (Eliminating hazards and reducing OH&S risks), which is located within Clause 8 ("Operation").
Use HSE’s five-level hierarchy alongside ERICPD, a complementary teaching mnemonic rather than a separate legal test. Physical measures change the plant or exposure pathway; instructions and checks change how people work. Apply HSENI COSHH guidance for a Northern Ireland workplace. The following is a worked task example, not a universal plant specification.
Fictional workplace decision
Fictional case — A store contains partly identified cleaning products. To save space, a worker proposes combining leftovers in one container without an approved method or reliable product information.
Compare the reasoning
Do not combine the partly identified leftovers or test compatibility through a small trial mixture. Establish reliable product identity and information, then use an assessed storage, use and disposal route. Saving space is not evidence that substances or residues can be mixed safely; unresolved identity remains a matter for competent escalation.
Existing SHAREhub photographic illustration. The fictional case supplies the task and decision evidence.
Identify who may deal with a small spill, the equipment and limits, and when to isolate the area and call specialist or emergency help. Unknown mixtures and symptoms require withdrawal and escalation. Do not improvise neutralisation or a rescue into a contaminated area.
What if incompatible chemicals are mixed?
Stop the task, move people away and activate the site emergency plan; do not approach a reacting container or improvise a neutraliser.
Heat, pressure, hissing, gas, bubbling, bulging, new odour or unexpected colour are stop-and-evacuate cues. Call 999 when there is a suspected toxic release, fire, explosion, serious injury or threat beyond local control. Trained responders need substance identity, SDS, inventory, drainage and site plan. Shut off remotely only where the procedure makes that safe. Untrained staff must not enter a plume, move a bulging container, pour another chemical into it or clean up before the incident is made safe. Reopen only after competent investigation and barrier repair.
Fictional workplace decision
Fictional case — A store contains partly identified cleaning products. To save space, a worker proposes combining leftovers in one container without an approved method or reliable product information.
Compare the reasoning
Do not combine the partly identified leftovers or test compatibility through a small trial mixture. Establish reliable product identity and information, then use an assessed storage, use and disposal route. Saving space is not evidence that substances or residues can be mixed safely; unresolved identity remains a matter for competent escalation.
Existing SHAREhub photographic illustration. The fictional case supplies the task and decision evidence.
Identify who may deal with a small spill, the equipment and limits, and when to isolate the area and call specialist or emergency help. Unknown mixtures and symptoms require withdrawal and escalation. Do not improvise neutralisation or a rescue into a contaminated area.
Use the chemical system to control a changed task
A purchased cleaner needs supplier information plus an assessment of dilution, use, ventilation, contact, storage and disposal. A fume created by heating material needs evidence about the material and process. Both sit in the chemical system, but a product inventory or SDS library cannot replace either task assessment. Use change as the connecting journey through the specialist guides. A different cleaner, contractor method or work temperature can alter exposure, reactivity, storage, emergency arrangements and competence. Assign one operational owner to bring those reviews together before use, with the relevant COSHH, compatibility, classification and fire/explosion routes kept distinct.
Determine reporting separately from emergency control; a spill is not automatically a statutory report. Illustrative example. A fictional contractor proposes a warmer cleaning process with a replacement product already used at another site. Decision. The contract and chemical owners review the changed material and conditions before accepting the method. Evidence to check. Current product information, actual temperature and exposure, compatibility, storage, waste route and emergency capability. Hold or escalation point. Hold use while introduced risks or changed controls remain unresolved. Follow-up. Update the approved use, contractor briefing and control checks so the substitute does not become an unreviewed routine.
Read with: HSE using chemicals at work · HSE COSHH basics · HSE COSHH assessment.
Fictional workplace decision
Fictional case — A store contains partly identified cleaning products. To save space, a worker proposes combining leftovers in one container without an approved method or reliable product information.
Compare the reasoning
Do not combine the partly identified leftovers or test compatibility through a small trial mixture. Establish reliable product identity and information, then use an assessed storage, use and disposal route. Saving space is not evidence that substances or residues can be mixed safely; unresolved identity remains a matter for competent escalation.
Professional teaching illustration. Read the written scenario for the facts; the image is not evidence of a real workplace.
Identify who may deal with a small spill, the equipment and limits, and when to isolate the area and call specialist or emergency help. Unknown mixtures and symptoms require withdrawal and escalation. Do not improvise neutralisation or a rescue into a contaminated area.
Which duties apply to chemical compatibility?
Assess hazardous exposure and fire/reactivity for the actual site; COMAH adds major-accident duties only where an establishment is in scope.
COSHH 2002 in GB and COSHH (NI) 2003 in NI cover hazardous exposure from stored and mixed substances. Dangerous-substance and fire/explosion law also requires location-specific assessment. An establishment at or above the relevant COMAH threshold quantities, subject to the scope rules, needs major-accident prevention and emergency arrangements under its GB or NI instrument; ordinary workplaces still need proportionate compatibility control. SDS information is an input, not a substitute for testing or a task-specific assessment of wastes and process conditions.
Fictional workplace decision
Fictional case — A store contains partly identified cleaning products. To save space, a worker proposes combining leftovers in one container without an approved method or reliable product information.
Compare the reasoning
Do not combine the partly identified leftovers or test compatibility through a small trial mixture. Establish reliable product identity and information, then use an assessed storage, use and disposal route. Saving space is not evidence that substances or residues can be mixed safely; unresolved identity remains a matter for competent escalation.
End-of-course revision · Drag each symbol to its hazard name, or use the menu on each card with touch or keyboard. This is practice alongside the separate final assessment.
Acute toxicity
Corrosive
Explosive
Flammable
Gas under pressure
Harmful / irritant
Hazardous to the environment
Oxidising
Serious health hazard
Match all nine symbols, then check your choices.
Need the reference table?Chemical hazard pictograms · examples and checksOptional reference · all nine symbols · does not change assessment requirements
READ THE LABEL · UNDERSTAND THE TASK
Recognise the symbol. Read the full label. Assess the actual task.
Examples illustrate possible uses of a symbol, not the classification of every formulation. A product can carry several pictograms. Check its current label, hazard statements and matching safety data sheet (SDS).
CLP/GHS hazard pictograms: meanings and illustrative examples
Pictogram and hazard
What it can mean
Example and question before work
ExplosiveGHS01
Explosion, blast or projection hazards; also certain self-reactive substances and organic peroxides.
Example: Certain fireworks or reactive chemical products.Ask: Does the authorised task account for impact, heat and the product’s stability limits?
FlammableGHS02
Can ignite; also used for certain self-heating, pyrophoric or water-reactive hazards.
Example: Petrol or some solvent-based products.Ask: What could release vapour or ignite it during this task, including nearby work?
OxidisingGHS03
Can cause or intensify fire; some strong oxidisers present an explosion hazard.
Example: Oxygen or certain oxidising chemicals.Ask: What incompatible materials and contamination must the assessed storage and connection keep apart?
Gas under pressureGHS04
Pressurised gas may burst if heated; refrigerated gas can cause cold burns.
Example: Compressed-gas cylinders.Ask: Have the gas identity, cylinder, connection and pressure or temperature hazards been checked?
CorrosiveGHS05
May damage metals, cause severe skin burns or cause serious eye damage; read the stated hazard.
Example: Certain drain cleaners, acids or alkalis.Ask: Which contact and splash routes must be prevented in this actual handling or dilution task?
Acute toxicityGHS06
Can be toxic or fatal after short exposure through the stated route.
Example: Methanol or certain pesticide products.Ask: Which exposure routes and emergency arrangements does this product’s information identify?
Harmful / irritantGHS07
May indicate harmful acute toxicity, irritation, skin sensitisation, drowsiness or dizziness; also ozone-layer hazards.
Example: Some detergents or cleaning products.Ask: What do the hazard statements say? Do not dismiss this as a harmless or mild product.
Serious health hazardGHS08
Can indicate cancer, genetic or reproductive harm, organ damage, respiratory sensitisation or aspiration hazard.
Example: Petrol or some sensitising chemical products.Ask: Which particular health effect is stated, and how does the task prevent the relevant exposure?
Hazardous to the environmentGHS09
Hazardous to aquatic life, potentially with long-lasting effects.
Example: Certain pesticides, biocides or fuels.Ask: How will the assessed arrangements prevent release to drains, water or soil?
Read beyond the picture · Open a prompt to compare the explanation.
Is the exclamation mark the same as the chest-starburst symbol?
No. The two symbols communicate different groups of hazards. Read the actual hazard statements: skin sensitisation and respiratory sensitisation are not interchangeable, and neither symbol specifies the complete task controls.
Does a bottle with no pictogram prove the task is safe?
No. Work may generate hazardous dust, fume or mist, and exposure depends on the task. Resolve missing or conflicting identification before use. A pictogram is not a compatibility chart or a complete workplace risk assessment.
Which information turns recognition into a useful work decision?
Match the product and SDS revision. Read the hazard statements and relevant SDS sections for handling, storage, exposure control, emergencies and reactivity together. Then check the actual task assessment and controls. A safety data sheet is not itself a COSHH assessment.