Thermal environments: controlling heat and cold at work

Approximately 50–77 minutes

Workplace awareness and prevention. Specialist competence, statutory examinations and work authorisation require separate evidence. Check the relevant UK nation and actual workplace arrangements. Completion does not establish practical competence, authorise hazardous work or award an external qualification.

Read the complete core teaching here. Use the interactive course for required activities, saved assessment and conditional completion.

Assess the whole exposure

Assess the whole exposure

Assess more than air temperature

Thermal environments: controlling heat and cold at work — explanatory workplace illustration
Professional teaching illustration. Read the written scenario for the facts; the image is not evidence of a real workplace.

Work rate, humidity, wind, radiation, clothing and time exposed all affect heat or cold risk. Individual circumstances can matter too. A thermometer or the absence of a universal maximum temperature does not remove the need to assess actual conditions.

How should thermal risk be assessed?

Assessment should consider environment, task, clothing/PPE, work rate, duration, worker feedback, symptoms, vulnerable groups and evidence. The assessment starts with the work, not the weather. Ask what the person is doing, how hard they are working, what clothing or PPE they must wear, how long exposure lasts, what recovery is available and what happens if they become impaired. For complex heat stress, HSE notes that measurement may need occupational health or competent support and may involve techniques such as wet-bulb globe temperature (WBGT), metabolic-rate estimation, clothing insulation values, heart-rate measurement or physiological monitoring where other controls cannot be implemented.

Neither the GB indoor guidance of normally 16°C, or 13°C for rigorous work, nor the similar Northern Ireland guidance is an outdoor work limit or a universal stop-work threshold. There is no legal maximum temperature. Any local work/rest or entry criteria must come from the actual task assessment, PPE and competent advice, then be checked against worker response. HSE law summary; HSENI temperature guidance.

Fictional workplace decision

Fictional case — The loading team’s air-temperature reading stays unchanged while work rate and heat-retaining clothing increase. A worker feels unwell, and the supervisor cites the absence of a universal legal maximum.

Compare the reasoning

Assess the whole loading task and act on the worker's warning signs rather than relying on one air-temperature reading. Increased work rate and heat-retaining clothing can change thermal demand without changing that reading. Review the environment, duration, people and controls, and use appropriate first-aid or emergency arrangements for the actual concern.

Open the interactive lesson

What does heat, hydration and wellbeing mean in practice?

Assess the whole exposure

Assess more than air temperature

A woman in navy workwear with perspiration on her face beside a separate skin cutaway showing sweat droplets, a sweat gland and duct, blood vessels, hair follicle and fat.View full detail ↗
Skin and cooling

A worker and a separate enlarged skin section introduce sweating and the skin’s blood supply. Connect these structures to the work and environment described in the lesson.

Locate the sweat gland and skin vessels in the enlarged view. How should conditions, workload, clothing and recovery be managed together?

educational illustration · healthy anatomy; enlarged details and teaching colours.
Outdoor workers taking a shaded hydration break on a UK site
Existing SHAREhub photographic illustration. The fictional case supplies the task and decision evidence.

Work rate, humidity, wind, radiation, clothing and time exposed all affect heat or cold risk. Individual circumstances can matter too. A thermometer or the absence of a universal maximum temperature does not remove the need to assess actual conditions.

What does heat, hydration and wellbeing mean in practice?

It means designing work so people can keep fluid balance, recover from heat load and maintain safe performance. Hydration is the body's fluid balance. Heat, sweating, physical work, vomiting, diarrhoea, alcohol, some medicines and restricted access to drinks or toilets can increase dehydration risk. In work settings, dehydration is not only a health issue; it can reduce concentration, reaction time and judgement. HSE heat stress at work Heat risk is more than the thermometer reading. HSE's thermal comfort material uses six broad factors: air temperature, radiant temperature, air movement, humidity, clothing and metabolic rate.

That explains why the same day can be tolerable for an office worker but risky for someone cutting paving slabs in the sun while wearing respiratory protective equipment.

Fictional workplace decision

Fictional case — The loading team’s air-temperature reading stays unchanged while work rate and heat-retaining clothing increase. A worker feels unwell, and the supervisor cites the absence of a universal legal maximum.

Compare the reasoning

Assess the whole loading task and act on the worker's warning signs rather than relying on one air-temperature reading. Increased work rate and heat-retaining clothing can change thermal demand without changing that reading. Review the environment, duration, people and controls, and use appropriate first-aid or emergency arrangements for the actual concern.

Open the interactive lesson

What controls should be considered before relying on behaviour?

Assess the whole exposure

Assess more than air temperature

Refuse collector in insulated high-visibility clothing emptying a wheelie bin in falling sleet and snow on a dark Scottish winter day
Existing SHAREhub photographic illustration. The fictional case supplies the task and decision evidence.

Work rate, humidity, wind, radiation, clothing and time exposed all affect heat or cold risk. Individual circumstances can matter too. A thermometer or the absence of a universal maximum temperature does not remove the need to assess actual conditions.

What controls should be considered before relying on behaviour?

Thermal risk is best managed by changing the environment, source, task and recovery before relying on personal coping. Telling workers to drink more or wear a coat is not enough if the job design creates excessive heat or cold exposure. Controls should remove or reduce the thermal load wherever practicable. Personal adaptation still matters, but only within a system that gives people real choices: access to water, shade, warm areas, dry clothing, recovery time, suitable PPE and the authority to stop. For heat, remove the hot operation where possible, then insulate or shield radiant surfaces and verify ventilation at the work position.

For cold, move a task out of the freezer when practicable, or use heated, enclosed workstations and insulated access doors without compromising escape. Changing the shift pattern or asking people to drink water supports these source controls but cannot replace them. Protective clothing must be assessed alongside the task: a suit may worsen heat load, while wet gloves can sharply reduce cold protection. The supervisor checks the real work rate, recovery space and worker feedback, then holds the task if a physical control fails or symptoms appear.

The worked five-level and ERICPD example sets out feasibility, owners, evidence and stop points for a hot plant room and chilled loading area.

Fictional workplace decision

Fictional case — The loading team’s air-temperature reading stays unchanged while work rate and heat-retaining clothing increase. A worker feels unwell, and the supervisor cites the absence of a universal legal maximum.

Compare the reasoning

Assess the whole loading task and act on the worker's warning signs rather than relying on one air-temperature reading. Increased work rate and heat-retaining clothing can change thermal demand without changing that reading. Review the environment, duration, people and controls, and use appropriate first-aid or emergency arrangements for the actual concern.

Open the interactive lesson

Change the conditions

Change the conditions

Choose task and environmental controls

Environmental conditions, the work and clothing all influence thermal comfort.
Detailed SHAREhub teaching diagram, used with its source explanation. It cannot establish actual site conditions or diagnose a person.

Consider process enclosure, ventilation, shade, warming or cooling areas, scheduling, breaks and suitable clothing. Make water and welfare accessible. Protective clothing can increase heat load, so controls must work together and be reviewed with competent help where needed.

How can the hierarchy of controls reduce heat exposure and dehydration risks?

Controls should reduce heat load first, then support hydration, recovery, supervision and emergency response. The hierarchy matters. Posters telling people to drink water are not enough if the work is too hot, too fast, too exposed or too PPE-heavy. Better control starts with task redesign, insulation, ventilation, shading, scheduling, mechanical aids, staffing and clear work-rest cycles. HSE heat stress at work Hydration controls must be practical. Water points should be close enough, clean, cool where possible, and compatible with hygiene or PPE arrangements. People should not have to choose between drinking water and meeting unrealistic productivity targets.

Choose the activity that matches the work. Each has its own controls, verification and stop/restart decisions; ERICPD and ISO 45001 are alternative views of that same activity. A roof task combines solar heat, physical effort and work at height; assess heat conditions and safe access together. ERICPD is a planning crossmap. Its prompts do not add a sixth rung or rank Isolate above engineering. Discipline verifies and sustains every control level. The hierarchy of controls in ISO 45001:2018 comes under Clause 8.1.2 (Eliminating hazards and reducing OH&S risks), which is located within Clause 8 ("Operation").

ESEAP: Elimination, Substitution, Engineering controls, Administrative controls and PPE. Control order: HSE hierarchy of controls and IOSH hierarchy of control guidance. A kitchen team works near hot cooking appliances; assess radiant heat, humidity, workload and ventilation at peak service. ERICPD is a planning crossmap. Its prompts do not add a sixth rung or rank Isolate above engineering. Discipline verifies and sustains every control level. The hierarchy of controls in ISO 45001:2018 comes under Clause 8.1.2 (Eliminating hazards and reducing OH&S risks), which is located within Clause 8 ("Operation").

Fictional workplace decision

Fictional case — The loading team’s air-temperature reading stays unchanged while work rate and heat-retaining clothing increase. A worker feels unwell, and the supervisor cites the absence of a universal legal maximum.

Compare the reasoning

Assess the whole loading task and act on the worker's warning signs rather than relying on one air-temperature reading. Increased work rate and heat-retaining clothing can change thermal demand without changing that reading. Review the environment, duration, people and controls, and use appropriate first-aid or emergency arrangements for the actual concern.

Open the interactive lesson

How does the HSE six-factor thermal comfort model work?

Change the conditions

Choose task and environmental controls

Thermal environments: controlling heat and cold at work — explanatory workplace illustration
Professional teaching illustration. Read the written scenario for the facts; the image is not evidence of a real workplace.

Consider process enclosure, ventilation, shade, warming or cooling areas, scheduling, breaks and suitable clothing. Make water and welfare accessible. Protective clothing can increase heat load, so controls must work together and be reviewed with competent help where needed.

How does the HSE six-factor thermal comfort model work?

The HSE six-factor model makes thermal assessment more reliable because it looks beyond air temperature alone. Thermal comfort needs more than a thermometer. Environmental conditions, the work and clothing all influence thermal comfort. The six labelled factors show why air temperature alone cannot describe the experience or establish heat safety. No. Consider radiation, air movement, humidity, activity, clothing and the person as well. Conceptual thermal-comfort diagram, not a heat-stress assessment or numerical exposure limit. Source guidance: HSE guidance Air temperature is only one part of thermal comfort and heat-stress risk.

A worker can be uncomfortable or unsafe because radiant heat, stagnant air, humidity, heavy PPE or high work rate prevents normal heat loss. Cold risk can also be worsened by wind, wet clothing, low activity, poor recovery areas and inadequate clothing. This model is useful for both beginners and specialists. A new supervisor can use it as a prompt during a briefing; a competent assessor can use it to decide whether more detailed heat-stress measurement, WBGT assessment, physiological monitoring or occupational-health advice is needed.

Fictional workplace decision

Fictional case — The loading team’s air-temperature reading stays unchanged while work rate and heat-retaining clothing increase. A worker feels unwell, and the supervisor cites the absence of a universal legal maximum.

Compare the reasoning

Assess the whole loading task and act on the worker's warning signs rather than relying on one air-temperature reading. Increased work rate and heat-retaining clothing can change thermal demand without changing that reading. Review the environment, duration, people and controls, and use appropriate first-aid or emergency arrangements for the actual concern.

Open the interactive lesson

How should heat and hydration controls be monitored?

Change the conditions

Choose task and environmental controls

Workers choosing a balanced meal in a UK staff canteen
Existing SHAREhub photographic illustration. The fictional case supplies the task and decision evidence.

Consider process enclosure, ventilation, shade, warming or cooling areas, scheduling, breaks and suitable clothing. Make water and welfare accessible. Protective clothing can increase heat load, so controls must work together and be reviewed with competent help where needed.

How should heat and hydration controls be monitored?

Monitoring should use worker feedback, observations, temperature checks, symptom reports and review after weather or work changes. Use HSE’s heat-stress checklist when assessing physiological heat risk from work rate, humidity, air movement, radiant heat and PPE. It explicitly says it is not a thermal-comfort questionnaire. Verify shade, water, recovery time and worker symptoms during the actual hot task, not only by reading one air thermometer. HSE heat stress checklist HSE heat stress checklist For basic comfort issues, worker feedback and the HSE workplace temperature checklist can be enough to identify whether action is needed.

For heat stress, assessment becomes more technical and may need occupational hygiene or occupational health support, especially where radiant heat, humidity, high work rate or specialist PPE are involved. Good monitoring looks for leading indicators: missed breaks, water points running dry, PPE removal, complaints, near misses, dizziness, fatigue, heat alerts, overtime, new starters and tasks that have changed. Waiting for collapse is not monitoring.

Fictional workplace decision

Fictional case — The loading team’s air-temperature reading stays unchanged while work rate and heat-retaining clothing increase. A worker feels unwell, and the supervisor cites the absence of a universal legal maximum.

Compare the reasoning

Assess the whole loading task and act on the worker's warning signs rather than relying on one air-temperature reading. Increased work rate and heat-retaining clothing can change thermal demand without changing that reading. Review the environment, duration, people and controls, and use appropriate first-aid or emergency arrangements for the actual concern.

Open the interactive lesson

Prepare to stop

Prepare to stop

Plan symptoms and failure escalation

Private supportive work-planning conversation in a UK office
Existing SHAREhub photographic illustration. The fictional case supplies the task and decision evidence.

Brief workers on reporting symptoms and failed controls without delay and ensure trained help can be reached. Suspected severe heat or cold illness needs emergency action under the site plan. Do not wait for a routine reading before protecting a distressed person.

Which GB and Northern Ireland duties apply to workplace temperature?

Both jurisdictions require foreseeable thermal risk to be assessed and controlled. GB and Northern Ireland have separate workplace, management, PPE and construction regulations; neither sets a general legal maximum temperature. For indoor workrooms, HSE's GB Approved Code of Practice normally suggests at least 16°C, or 13°C for work involving rigorous physical effort. HSENI gives similar guidance in Northern Ireland. These are guidance benchmarks, not blanket statutory minimums, outdoor limits or proof that a task is safe. The governing duty is a reasonable indoor temperature, with task and workplace exceptions and an assessment of all thermal factors.

HSE legal explanation; HSENI temperature and work. The following existing table gives GB examples, except that UK data-protection law applies more widely. The Equality Act 2010 applies in GB; Northern Ireland has its own equality framework. Check the current amended text and sector-specific duties before advising on a particular site. HSE GB guidance can inform NI practice but does not replace NI law or HSENI advice.

Fictional workplace decision

Fictional case — The loading team’s air-temperature reading stays unchanged while work rate and heat-retaining clothing increase. A worker feels unwell, and the supervisor cites the absence of a universal legal maximum.

Compare the reasoning

Assess the whole loading task and act on the worker's warning signs rather than relying on one air-temperature reading. Increased work rate and heat-retaining clothing can change thermal demand without changing that reading. Review the environment, duration, people and controls, and use appropriate first-aid or emergency arrangements for the actual concern.

Open the interactive lesson

What evidence shows heat and hydration are managed?

Prepare to stop

Plan symptoms and failure escalation

Outdoor workers taking a shaded hydration break on a UK site
Existing SHAREhub photographic illustration. The fictional case supplies the task and decision evidence.

Brief workers on reporting symptoms and failed controls without delay and ensure trained help can be reached. Suspected severe heat or cold illness needs emergency action under the site plan. Do not wait for a routine reading before protecting a distressed person.

What evidence shows heat and hydration are managed?

Evidence should show that controls are planned before exposure and adapted when conditions change. For normal workplaces, records may be simple: welfare checks, drinking water provision, worker feedback and corrective actions. For higher-risk hot work, evidence should be more structured and may include heat stress assessments, work-rest plans, PPE heat-burden review, supervisor checks and incident learning. HSE heat stress at work If the same complaints return every summer, the evidence should not simply show that a reminder was sent. It should show what changed: blinds, ventilation, shift timing, break access, workload, plant insulation or welfare.

Fictional workplace decision

Fictional case — The loading team’s air-temperature reading stays unchanged while work rate and heat-retaining clothing increase. A worker feels unwell, and the supervisor cites the absence of a universal legal maximum.

Compare the reasoning

Assess the whole loading task and act on the worker's warning signs rather than relying on one air-temperature reading. Increased work rate and heat-retaining clothing can change thermal demand without changing that reading. Review the environment, duration, people and controls, and use appropriate first-aid or emergency arrangements for the actual concern.

Open the interactive lesson

How should heat illness or cold injury be escalated?

Prepare to stop

Plan symptoms and failure escalation

Thermal environments: controlling heat and cold at work — explanatory workplace illustration
Professional teaching illustration. Read the written scenario for the facts; the image is not evidence of a real workplace.

Brief workers on reporting symptoms and failed controls without delay and ensure trained help can be reached. Suspected severe heat or cold illness needs emergency action under the site plan. Do not wait for a routine reading before protecting a distressed person.

How should heat illness or cold injury be escalated?

Stop exposure and use the site first-aid plan. Call 999 for suspected heatstroke or hypothermia, or for serious deterioration; do not wait for a temperature reading or leave the person alone. For heat exhaustion, move the person to a cool place, remove unnecessary clothing, cool the skin and give water only if they are fully alert and able to swallow. In Great Britain, use NHS 111 if heat-exhaustion symptoms are difficult to manage or advice is needed. In Northern Ireland, if the person improves but concerns remain, contact a GP or GP out-of-hours service for advice.

Call 999 immediately for confusion, poor coordination, collapse, seizure, very high temperature or other heatstroke signs; do not wait 30 minutes for serious signs. Also call 999 if still unwell after 30 minutes of cooling. Continue cooling while awaiting help and follow the call handler's directions. NHS heat illness advice. For suspected hypothermia, including confusion, slurred speech or slow breathing after cold exposure, call 999 immediately; do not wait for a thermometer reading. Where A&E attendance is advised, do not drive yourself. Move the person into shelter, replace wet clothing with dry covering, keep them company and give a warm non-alcoholic drink only if fully awake.

Do not use a hot bath, direct heat, alcohol or rubbing. For suspected frostbite, seek medical help; hard frozen skin, blisters or loss of feeling need 999 or A&E assessment; do not drive yourself. Do not rub or apply direct heat. NHS hypothermia; NHS frostbite. First aid is not permission to resume the task. Preserve essential incident facts, check the whole crew for exposure, investigate failed controls and obtain competent clearance before a revised method is used. Check reportability under the law for the actual GB or NI event; not every episode of discomfort is automatically reportable.

Fictional workplace decision

Fictional case — The loading team’s air-temperature reading stays unchanged while work rate and heat-retaining clothing increase. A worker feels unwell, and the supervisor cites the absence of a universal legal maximum.

Compare the reasoning

Assess the whole loading task and act on the worker's warning signs rather than relying on one air-temperature reading. Increased work rate and heat-retaining clothing can change thermal demand without changing that reading. Review the environment, duration, people and controls, and use appropriate first-aid or emergency arrangements for the actual concern.

Open the interactive lesson