Optional presentation practice. Choices and model launches do not write LMS grades, completion or certificates. This extension takes additional learning time.
1. Human factors and preventing error Improve the conditions that shape reliable work.
2. Choose a learning route 3. Examine the task system Understand job, individual and organisational influences.
Human factors means designing work around how people actually think, see, move, remember, communicate and make decisions. HSE describes performance through job, individual and organisation factors.
Human factors means designing work around how people actually think, see, move, remember, communicate and make decisions. HSE describes performance through job, individual and organisation factors. Human factors are a design and management question; they are not simply an assessment of whether the worker was careful. HSE HSG48 reducing error and influencing behaviour HSE human failure types HSE HSG48 full guide A traditional response to an incident might say 'the operator made a mistake'. A human factors response asks better questions: Was the display confusing? Was the alarm flood overwhelming? Was the procedure usable? Was the person fatigued? Was supervision available? Were priorities clear? Had the task changed? Did the organisation reward speed over control?
4. The fictional case and decision boundary Understand job, individual and organisational influences.
Task and setting A fictional selection error reveals questions about labels, interruptions and workload. Decision to practise Fictional case: A worker intends to follow the method but selects the wrong similar-looking control. An initial report calls this a deliberate rule breach without further evidence. Evidence to consider Avoid treating every deviation as deliberate.
5. Decision 1: interpret the evidence Fictional case: A worker intends to follow the method but selects the wrong similar-looking control. An initial report calls this a deliberate rule breach without further evidence.
What is sound?
Examine the action and context before assigning an error or violation explanation. (supported response) Assume intent from the outcome alone. Declare that rule deviations never occur. The type and context matter to an effective response.
6. Reconsider the evidence What is sound?
Examine the action and context before assigning an error or violation explanation. (supported response) Assume intent from the outcome alone. Declare that rule deviations never occur. The type and context matter to an effective response.
7. Decision 1 explained The type and context matter to an effective response.
Avoid treating every deviation as deliberate.
8. Distinguish different performance problems Avoid treating every deviation as deliberate.
Human failure should be analysed by type because different failures need different controls. A slip is an action error, such as pressing the wrong button. A lapse is a memory error, such as forgetting a step.
Human failure should be analysed by type because different failures need different controls. A slip is an action error, such as pressing the wrong button. A lapse is a memory error, such as forgetting a step. A mistake is a planning or judgement error, such as choosing the wrong isolation method. A violation is a deliberate rule deviation, but even violations often have system causes such as time pressure, poor rules, weak supervision or normalised shortcuts. HSE HSG48 full guide Good investigations use the type of failure to choose controls. A memory lapse may need a checklist or prompt. A mistake may need better training, procedure or decision aid. A violation may need leadership, supervision, rule quality and workload review.
9. Classify the event information Sort the cards. Drag each card, or use its labelled category selector.
Sort the cards. Drag each card, or use its labelled category selector.
The controls look similar from the work position. — Observed or reported condition. This can be examined. Did the similarity influence selection? — Question for investigation. A causal relationship needs evidence. The worker intended the mistake. — Unsupported conclusion. Outcome does not establish intent. 10. Compare the reasoning: Classify the event information The controls look similar from the work position. Observed or reported condition Did the similarity influence selection? Question for investigation The worker intended the mistake. Unsupported conclusion
Sort the cards. Drag each card, or use its labelled category selector.
The controls look similar from the work position. — Observed or reported condition. This can be examined. Did the similarity influence selection? — Question for investigation. A causal relationship needs evidence. The worker intended the mistake. — Unsupported conclusion. Outcome does not establish intent. 11. Reduce the opportunity for error Consider design and physical safeguards before reminders.
Good job design makes the safe way practical, obvious and achievable. A job that requires high force, awkward posture, fine judgement, memory of many steps, poor access, conflicting instructions and rushed timing is an error trap.
Good job design makes the safe way practical, obvious and achievable. A job that requires high force, awkward posture, fine judgement, memory of many steps, poor access, conflicting instructions and rushed timing is an error trap. People will work around it because they still have to get the job done. Human factors turns those traps into design questions. HSE HSG48 full guide Design improvements can be small: better lighting, clearer labels, valve numbering, task sequencing, lifting aids, interlock design, less cluttered screens, better access to isolation points, clearer procedures or fewer interruptions during safety-critical steps. ERICPD is used here as a planning mnemonic. The linked HSE five-level hierarchy is the official source for the order and relative reliability of controls; the two labels are not identical.
Open the related fictional model case
12. Decision 2: choose the response Fictional case: Two time-critical tasks regularly coincide. The supervisor assumes the unchanged headcount proves the work is manageable, but actual timing and support have not been reviewed.
What information is needed?
A diagnosis based on the brief case. The concurrent demands, task requirements and available support. (supported response) The unchanged staffing total without examining concurrent critical demands. Workload needs task evidence rather than assumption.
13. Compare the consequences What information is needed?
A diagnosis based on the brief case. The concurrent demands, task requirements and available support. (supported response) The unchanged staffing total without examining concurrent critical demands. Workload needs task evidence rather than assumption.
14. Decision 2 explained Workload needs task evidence rather than assumption.
Recognise how work conditions affect performance.
15. Look at competing demands Recognise how work conditions affect performance.
Both overload and underload can degrade performance. High workload can reduce attention, memory and decision quality. People may miss alarms, skip checks, forget handback steps or rely on shortcuts.
Both overload and underload can degrade performance. High workload can reduce attention, memory and decision quality. People may miss alarms, skip checks, forget handback steps or rely on shortcuts. Underload can also be dangerous, especially in monitoring roles where boredom and low stimulation reduce situation awareness. HSE HSG48 full guide Workload should be assessed during normal work, peaks, abnormal operations, emergencies, turnarounds, maintenance shutdowns, lone working and organisational change. Staffing is not just headcount; it is whether the right people with the right competence are available at the right time. Organisational factors create the climate in which people decide what really matters. Leadership messages are not only speeches. They are budgets, staffing levels, maintenance deferrals, contractor choices, action close-out, overtime expectations, response to bad news and whether supervisors are supported when they stop work.
16. Review the workload case Choose every supported action. Leave the unsuitable actions unselected.
Choose every supported action. Leave the unsuitable actions unselected.
Examine coincident task demands. — Supported action. Timing matters. Use headcount alone as proof. — Leave unselected. Numbers do not establish the task conditions. Review support and work allocation. — Supported action. Organisational arrangements influence performance. 17. Compare the reasoning: Review the workload case Examine coincident task demands. Supported action Use headcount alone as proof. Leave unselected Review support and work allocation. Supported action
Choose every supported action. Leave the unsuitable actions unselected.
Examine coincident task demands. — Supported action. Timing matters. Use headcount alone as proof. — Leave unselected. Numbers do not establish the task conditions. Review support and work allocation. — Supported action. Organisational arrangements influence performance. 18. Use information that supports decisions Check usability and understanding at the task.
Procedures should help competent people do the right thing under real conditions. A good procedure is accurate, current, short enough for the task, written for the user, tested with workers and linked to competence.
Procedures should help competent people do the right thing under real conditions. A good procedure is accurate, current, short enough for the task, written for the user, tested with workers and linked to competence. It highlights safety-critical steps, decision points, hold points, warnings and stop-work triggers. It should not be a legal shield written in language nobody uses. HSE HSG48 full guide Procedures are weaker where the task is fast-moving, highly physical, abnormal, time pressured or dependent on equipment condition. In those cases, the procedure needs support from engineering controls, supervision, checklists, labelling, prompts and competent planning. Communication is a control when people need shared understanding at the right time. Safety-critical communication includes briefings, handovers, permits, radio calls, alarms, warning signs, procedures, shift logs, contractor instructions and emergency messages.
Open the related fictional model case
19. Decision 3: apply and review Fictional case: A reviewed control change is installed after repeated selection errors. The action closes on delivery records, while its practical effect on the actual selection task is unexamined.
What is missing?
The change’s installation date without checking the selection task afterwards. Proof that all future human error is impossible. Evidence that the changed arrangement reduces the identified task weakness. (supported response) Effectiveness should relate to the original mechanism.
20. Revisit the control or support boundary What is missing?
The change’s installation date without checking the selection task afterwards. Proof that all future human error is impossible. Evidence that the changed arrangement reduces the identified task weakness. (supported response) Effectiveness should relate to the original mechanism.
21. Decision 3 explained Effectiveness should relate to the original mechanism.
Choose assurance related to the identified weakness.
22. Test whether the improvement worked Choose assurance related to the identified weakness.
Evidence should show that tasks, people and organisational conditions are understood and improved. Human factors evidence is not just a culture survey.
Evidence should show that tasks, people and organisational conditions are understood and improved. Human factors evidence is not just a culture survey. Strong evidence comes from task observations, procedure reviews, workload assessments, staffing reviews, competence records, communications checks, incident investigations, audit findings, worker feedback and management review decisions. HSE HSG48 full guide The best evidence compares work as imagined with work as done. If a procedure says two people verify an isolation but field observation shows one person is always pulled away, the human factors issue is resource and work design, not just non-compliance. For wrong-valve opening during tank transfer under workload and label ambiguity, the management check should start with a real control decision: Remove the wrong-valve path or unnecessary manual transfer decision by process redesign.
23. Match improvement evidence Match each card to its meaning. Drag, or use the labelled category selector.
Match each card to its meaning. Drag, or use the labelled category selector.
The new identification is fitted. — Implementation. The change exists. Users distinguish the correct control in relevant use. — Task application. This examines the task effect. No future mistake can occur. — Unsupported extension. The sample cannot establish that. 24. Compare the reasoning: Match improvement evidence The new identification is fitted. Implementation Users distinguish the correct control in relevant use. Task application No future mistake can occur. Unsupported extension
Match each card to its meaning. Drag, or use the labelled category selector.
The new identification is fitted. — Implementation. The change exists. Users distinguish the correct control in relevant use. — Task application. This examines the task effect. No future mistake can occur. — Unsupported extension. The sample cannot establish that. 25. Apply the lesson in a fictional workplace A powered impact wrench is used repeatedly and final wheel tightening is being rushed.
Choose assurance related to the identified weakness.
Open the related fictional model case
26. Take the learning into a fictional task Choose assurance related to the identified weakness.
Task and people A fictional selection error reveals questions about labels, interruptions and workload. Control or support Recognise how work conditions affect performance. Check and review Choose assurance related to the identified weakness.
27. Explain your reasoning without the answer sheet Use the supplied case facts. Explain why a choice fits the task and what remains uncertain. A points total or completed form cannot replace the required control or support arrangement.
28. Continue with the full course and Knowledge Hub Use the original course for its six lessons, required activities, final assessment and saved record. This optional companion does not change course grades, completion or certificates.
Enable JavaScript for interactive practice, or use the PowerPoint and its notes.