Optional presentation practice. Choices and model launches do not write LMS grades, completion or certificates. This extension takes additional learning time.
1. Internal safety auditing essentials Sample evidence, write useful findings and verify improvement.
2. Choose a learning route 3. Know the assurance question Distinguish audit from a routine condition check.
Health and safety auditing means systematically checking whether the arrangements for managing risk are suitable, implemented and effective. An audit should follow the line from policy to practice.
Health and safety auditing means systematically checking whether the arrangements for managing risk are suitable, implemented and effective. An audit should follow the line from policy to practice. If a policy says machinery guarding is controlled, the audit should sample the guarding standard, risk assessments, inspection records, maintenance response, training, supervision and actual machines in use. If a policy says contractors are controlled, the audit should test prequalification, induction, permit control, supervision and post-job review. In a strong assurance model, proactive monitoring of activities and tasks feeds into second-line assurance and then into internal auditing or specialist review. That means supervisor checklist data, permit checks, defect trends and task observations are not just local records; they become evidence that the management system is working or drifting.
4. The fictional case and decision boundary Distinguish audit from a routine condition check.
Task and setting A fictional audit finds differences between written checks and live work. Decision to practise Fictional case: The audit plan covers only documents easiest to retrieve. It excludes a known high-risk interface and the shifts where repeated concerns arise, without explaining the scope decision. Evidence to consider Choose criteria, evidence and samples from the actual risk.
5. Decision 1: interpret the evidence Fictional case: The audit plan covers only documents easiest to retrieve. It excludes a known high-risk interface and the shifts where repeated concerns arise, without explaining the scope decision.
What should planning consider?
An assumption that one daytime sample covers every condition. Risk significance, relevant criteria and representative evidence for the audit question. (supported response) Convenient documents as the complete basis. The plan must fit the question it claims to answer.
6. Reconsider the evidence What should planning consider?
An assumption that one daytime sample covers every condition. Risk significance, relevant criteria and representative evidence for the audit question. (supported response) Convenient documents as the complete basis. The plan must fit the question it claims to answer.
7. Decision 1 explained The plan must fit the question it claims to answer.
Choose criteria, evidence and samples from the actual risk.
8. Set a useful audit scope Choose criteria, evidence and samples from the actual risk.
Audit planning should focus on risk, scope, criteria, sampling and the evidence needed to answer the audit question. The audit plan should say what is being audited and why. A fire audit, contractor audit, COSHH audit and leadership audit need different evidence.
Audit planning should focus on risk, scope, criteria, sampling and the evidence needed to answer the audit question. The audit plan should say what is being audited and why. A fire audit, contractor audit, COSHH audit and leadership audit need different evidence. Planning should also identify high-risk work, recent incidents, overdue actions, complaints, changes and known weak signals. Good planning prevents both over-auditing and under-auditing. A small low-risk office may need proportionate checks, while a multi-site construction or process operation needs deeper sampling of significant controls and management review. Sample high-risk work, previous failures and contractor interfaces before scheduling convenient interviews. HSE audit and reporting guidance A good audit moves from scope and planning through evidence gathering, reporting, action close-out and effectiveness review.
9. Plan the audit sample Choose every supported action. Leave the unsuitable actions unselected.
Choose every supported action. Leave the unsuitable actions unselected.
Link scope to important risks and criteria. — Supported action. The question should drive the sample. Choose only easy files without justification. — Leave unselected. Convenience can hide significant gaps. Explain sample limitations. — Supported action. The conclusion needs its scope. 10. Compare the reasoning: Plan the audit sample Link scope to important risks and criteria. Supported action Choose only easy files without justification. Leave unselected Explain sample limitations. Supported action
Choose every supported action. Leave the unsuitable actions unselected.
Link scope to important risks and criteria. — Supported action. The question should drive the sample. Choose only easy files without justification. — Leave unselected. Convenience can hide significant gaps. Explain sample limitations. — Supported action. The conclusion needs its scope. 11. Compare different evidence sources Use observation, records and relevant accounts.
Auditors should triangulate evidence from documents, records, interviews, observations and performance data. A document can show intent, a record can show an activity occurred, an observation can show real practice and an interview can show understanding. None is enough alone.
Auditors should triangulate evidence from documents, records, interviews, observations and performance data. A document can show intent, a record can show an activity occurred, an observation can show real practice and an interview can show understanding. None is enough alone. The strength of auditing comes from comparing them. For example, if the training matrix says forklift drivers are trained but field observation shows poor segregation and interviews show confusion about pedestrian routes, the finding is not only a training issue. It may be traffic planning, supervision, layout or leadership attention. Compare documents with workers’ accounts and the physical state of safeguards at live work. HSG65 Managing for health and safety HSE audit and reporting guidance
12. Decision 2: choose the response Fictional case: An auditor samples one missing control check and writes that the entire organisation is unsafe. The report does not identify the applicable criterion or the exact evidence.
What is better?
A broader adjective without more evidence. A favourable conclusion because only one sample was taken. A finding identifying the criterion, sampled evidence and supported gap. (supported response) Scope the judgement without losing the significance of the gap.
13. Compare the consequences What is better?
A broader adjective without more evidence. A favourable conclusion because only one sample was taken. A finding identifying the criterion, sampled evidence and supported gap. (supported response) Scope the judgement without losing the significance of the gap.
14. Decision 2 explained Scope the judgement without losing the significance of the gap.
Keep findings specific and proportionate.
15. Write the requirement and the gap Keep findings specific and proportionate.
Findings should be written so the reader understands the evidence, risk significance and required improvement. A finding that says 'procedure not followed' may be accurate but incomplete.
Findings should be written so the reader understands the evidence, risk significance and required improvement. A finding that says 'procedure not followed' may be accurate but incomplete. A stronger finding explains why: the procedure is outdated, equipment layout changed, supervision is inconsistent or workload makes compliance unrealistic. That helps management fix the system rather than blame the symptom. Grading should be consistent and risk-based. A missing signature on a low-risk form is not the same as an untested fire alarm, absent isolation or repeated failure to close RIDDOR investigation actions. State the observed evidence, failed requirement or control, significance, owner and corrective action. HSG65 Managing for health and safety Good audit findings connect what was seen, what was sampled, why it matters, what system weakness exists and what evidence will prove improvement.
16. Build a defensible finding Sort the cards. Drag each card, or use its labelled category selector.
Sort the cards. Drag each card, or use its labelled category selector.
The arrangement requires a defined check. — Criterion. This states what should occur. The sampled task has no evidence of that check. — Evidence. This is the observed gap. Every workplace arrangement has failed. — Unsupported extension. The sample does not establish that. 17. Compare the reasoning: Build a defensible finding The arrangement requires a defined check. Criterion The sampled task has no evidence of that check. Evidence Every workplace arrangement has failed. Unsupported extension
Sort the cards. Drag each card, or use its labelled category selector.
The arrangement requires a defined check. — Criterion. This states what should occur. The sampled task has no evidence of that check. — Evidence. This is the observed gap. Every workplace arrangement has failed. — Unsupported extension. The sample does not establish that. 18. Make actions address the mechanism Avoid closing a systemic issue with paperwork alone.
ERICPD is used here as a planning mnemonic. The linked HSE five-level hierarchy is the official source for the order and relative reliability of controls; the two labels are not identical.
ERICPD is used here as a planning mnemonic. The linked HSE five-level hierarchy is the official source for the order and relative reliability of controls; the two labels are not identical. Remove or redesign the hazardous transfer or fume-generating task first; the study or audit verifies decisions and evidence, not the barrier by itself. The auditor samples welding-fume control on a fabrication line. All welding fume can cause lung cancer; the audit tests whether source reduction and local exhaust actually work, but is not itself a physical control. HSE welding-fume control ERICPD is a six-stage planning aid; the HSE five levels separate substitution, engineering, administration and residual PPE. Isolate normally maps to engineered separation, Control can include physical or administrative measures, and Discipline sustains controls through maintenance and learning.
19. Decision 3: apply and review Fictional case: The agreed change is implemented and checked on representative work. The reviewer wants to extend that result to unrelated sites and every future activity without further evidence.
What is justified?
Recognise the verified effect within its scope and retain other questions separately. (supported response) Treat the sample as universal proof. Discard the useful result because it has limits. A bounded conclusion can still be valuable.
20. Revisit the control or support boundary What is justified?
Recognise the verified effect within its scope and retain other questions separately. (supported response) Treat the sample as universal proof. Discard the useful result because it has limits. A bounded conclusion can still be valuable.
21. Decision 3 explained A bounded conclusion can still be valuable.
Distinguish action evidence from universal assurance.
22. Verify improvement and retain limits Distinguish action evidence from universal assurance.
Audit actions should be closed with evidence that the control has improved and the risk has reduced. A common weakness is closing actions because a document was updated, an email was sent or a toolbox talk was delivered.
Audit actions should be closed with evidence that the control has improved and the risk has reduced. A common weakness is closing actions because a document was updated, an email was sent or a toolbox talk was delivered. Those may be part of the response, but they do not prove the problem is fixed. Verification should sample whether the changed arrangement works in the field. For high-risk findings, action close-out should include effectiveness review. If a guarding audit found defeated interlocks, the closure evidence should include repaired guards, supervision, maintenance response, operator briefing and later field checks. Revisit the live task to confirm that the corrective action controls the hazard under normal pressure. HSG65 Managing for health and safety
23. Match action assurance Match each card to its meaning. Drag, or use the labelled category selector.
Match each card to its meaning. Drag, or use the labelled category selector.
The reviewed planning change is in use. — Implemented. This establishes application. Relevant samples show the original conflict addressed. — Effectiveness examined. This examines its effect. All future sites are therefore compliant. — Beyond the evidence. The scope is unsupported. 24. Compare the reasoning: Match action assurance The reviewed planning change is in use. Implemented Relevant samples show the original conflict addressed. Effectiveness examined All future sites are therefore compliant. Beyond the evidence
Match each card to its meaning. Drag, or use the labelled category selector.
The reviewed planning change is in use. — Implemented. This establishes application. Relevant samples show the original conflict addressed. — Effectiveness examined. This examines its effect. All future sites are therefore compliant. — Beyond the evidence. The scope is unsupported. 25. Apply the lesson in a fictional workplace A fictional audit finds differences between written checks and live work.
Distinguish action evidence from universal assurance.
26. Take the learning into a fictional task Distinguish action evidence from universal assurance.
Task and people A fictional audit finds differences between written checks and live work. Control or support Keep findings specific and proportionate. Check and review Distinguish action evidence from universal assurance.
27. Explain your reasoning without the answer sheet Use the supplied case facts. Explain why a choice fits the task and what remains uncertain. A points total or completed form cannot replace the required control or support arrangement.
28. Continue with the full course and Knowledge Hub Use the original course for its six lessons, required activities, final assessment and saved record. This optional companion does not change course grades, completion or certificates.
Enable JavaScript for interactive practice, or use the PowerPoint and its notes.