Optional presentation practice. Choices and model launches do not write LMS grades, completion or certificates. This extension takes additional learning time.
1. Lone-working risk management Decide whether the task can be done alone and test the whole help-and-response arrangement.
2. Choose a learning route 3. Recognise isolation in ordinary work Explain why help can be delayed even on a familiar site.
Lone work is not limited to someone miles from another person. A cleaner after closing, a worker in a remote plant room or a person opening premises may be without close supervision and immediate help.
Lone work is not limited to someone miles from another person. A cleaner after closing, a worker in a remote plant room or a person opening premises may be without close supervision and immediate help. The same task can have different consequences when nobody notices an injury or missed return.
Lone working is not automatically prohibited, but its risks must be controlled before it begins. Some tasks need direct assistance, supervision or specialist arrangements that a check-in cannot replace. Identify the actual activity, location, person and foreseeable incident, then ask how help will be summoned if the worker cannot call. A broad job title or general permission to work alone cannot decide every later task. Health-related concerns require appropriate support rather than a manager’s diagnosis.
4. The fictional case and decision boundary Explain why help can be delayed even on a familiar site.
Task and setting Fictional case: a maintenance worker visits a remote store after hours. Decision to practise The approved visit is a visual inspection from a safe position. On arrival, the worker is asked to open the machinery and investigate an unexplained electrical fault. Evidence to consider Prioritise removing or redesigning unsuitable lone work.
5. Decision 1: interpret the evidence The approved visit is a visual inspection from a safe position. On arrival, the worker is asked to open the machinery and investigate an unexplained electrical fault.
What is the correct task decision?
Keep to the permitted scope and obtain a new competent plan for the changed intervention. (supported response) Treat arrival on site as authority for any requested repair. Use a check-in app as permission to open the machine. Task controls and competence must match the actual intervention, not the journey’s original label.
6. Reconsider the evidence What is the correct task decision?
Keep to the permitted scope and obtain a new competent plan for the changed intervention. (supported response) Treat arrival on site as authority for any requested repair. Use a check-in app as permission to open the machine. Task controls and competence must match the actual intervention, not the journey’s original label.
7. Decision 1 explained Task controls and competence must match the actual intervention, not the journey’s original label.
Prioritise removing or redesigning unsuitable lone work.
8. Decide the task boundary first Prioritise removing or redesigning unsuitable lone work.
First ask whether the work needs to happen alone at all. A paired visit, remote observation or rescheduled task may remove the isolated exposure. A low-risk visual check is different from electrical fault-finding, entering a confined space or another high-consequence intervention.
First ask whether the work needs to happen alone at all. A paired visit, remote observation or rescheduled task may remove the isolated exposure. A low-risk visual check is different from electrical fault-finding, entering a confined space or another high-consequence intervention. Avoid extending permission from one to the other.
Where lone work is acceptable, define the permitted actions, exclusions and authority to stop. Match competence, access, lighting, environment and emergency arrangements to that scope. A second person also needs suitable capability and a safe role; merely adding a name does not design rescue. Workers and planners should understand the boundary before departure. If the request changes, reopen the decision rather than rely on experience, an app or pressure to finish while already at the location.
9. Separate the lone-work decision Sort the cards. Drag each card, or use its labelled category selector.
Sort the cards. Drag each card, or use its labelled category selector.
Fault-finding replaces a permitted visual check — Task suitability. Reopen the task decision and competent plan. The phone loses coverage inside the store — Communication. Resolve contact before relying on the arrangement. No one monitors alerts after closing — Response. An alarm needs an owned and achievable response. 10. Compare the reasoning: Separate the lone-work decision Fault-finding replaces a permitted visual check Task suitability The phone loses coverage inside the store Communication No one monitors alerts after closing Response
Sort the cards. Drag each card, or use its labelled category selector.
Fault-finding replaces a permitted visual check — Task suitability. Reopen the task decision and competent plan. The phone loses coverage inside the store — Communication. Resolve contact before relying on the arrangement. No one monitors alerts after closing — Response. An alarm needs an owned and achievable response. 11. Plan the location and contact chain Connect host information with a workable communication route.
Before a lone visit, confirm the task, current site hazards, safe access, expected location and return. Host and sending organisations need clear contact and responsibility where both are involved.
Before a lone visit, confirm the task, current site hazards, safe access, expected location and return. Host and sending organisations need clear contact and responsibility where both are involved. A changed locked gate, flooded route or unavailable host contact can undermine the assessment before work starts.
Check communication in the actual location and conditions. A phone that works in the car park may fail in the store or basement. Agree how contact is made, who monitors it and what happens if it is lost. Provide location and access information needed for a safe response, with proportionate handling of personal data. Do not treat an unreachable person on a contact sheet as an active controller. Confirm the arrangement before exposure rather than discover its gaps during an incident.
12. Decision 2: choose the response The worker’s app generates a missed check-in, but alerts go to an unmonitored daytime inbox. No evening responder knows the location or has a gate-access plan.
What is missing?
Nothing because the app transmitted an alert. A monitored, owned escalation and safe achievable response. (supported response) Only a newer phone model. Sending an alarm is not the same as detecting it and safely providing help.
13. Compare the consequences What is missing?
Nothing because the app transmitted an alert. A monitored, owned escalation and safe achievable response. (supported response) Only a newer phone model. Sending an alarm is not the same as detecting it and safely providing help.
14. Decision 2 explained Sending an alarm is not the same as detecting it and safely providing help.
Distinguish an alarm from a complete response system.
15. Make a missed contact trigger action Distinguish an alarm from a complete response system.
An app, alarm or check-in is useful only when a human response follows. Define the monitored contact pattern, missed-contact escalation, named cover, last-known-location information and access for suitable responders. Set timings from the assessed emergency and achievable response, rather than copy a universal interval.
An app, alarm or check-in is useful only when a human response follows. Define the monitored contact pattern, missed-contact escalation, named cover, last-known-location information and access for suitable responders. Set timings from the assessed emergency and achievable response, rather than copy a universal interval.
Test the chain safely: does the controller notice, know what to do and have an appropriate response available outside office hours? A distress alarm or known incident needs immediate emergency action under the plan; it should not wait for the next routine check. Responders must not enter uncontrolled danger for an improvised rescue. If help cannot arrive within the planned needs, redesign or remove the lone arrangement. A device test alone verifies only one part of this chain.
16. Plan a remote visual visit Arrange the steps for this case. Drag, or use Move up and Move down.
Arrange the steps for this case. Drag, or use Move up and Move down.
Define the allowed task and whether lone work is acceptable Confirm current access, contact, location and safe response Brief task limits and stop triggers to the actual worker and controller Check contact and review any changed condition before proceeding Suitability comes before a device; contact and response must support the defined task.
17. Compare the reasoning: Plan a remote visual visit 1 Define the allowed task and whether lone work is acceptable 2 Confirm current access, contact, location and safe response 3 Brief task limits and stop triggers to the actual worker and controller 4 Check contact and review any changed condition before proceeding
Arrange the steps for this case. Drag, or use Move up and Move down.
Define the allowed task and whether lone work is acceptable Confirm current access, contact, location and safe response Brief task limits and stop triggers to the actual worker and controller Check contact and review any changed condition before proceeding Suitability comes before a device; contact and response must support the defined task.
18. Stop when assumptions fail Recognise changed task, contact and access as decision triggers.
Lost communication, unexpected people, flooding, an unsafe route or a task beyond the agreed scope can require withdrawal or restriction. Use the defined safe location and reporting route.
Lost communication, unexpected people, flooding, an unsafe route or a task beyond the agreed scope can require withdrawal or restriction. Use the defined safe location and reporting route. Do not continue deeper into a location to regain a signal or attempt a prohibited intervention because a return call is due.
The worker needs clear authority to stop; supervisors must support that decision and arrange a safe alternative rather than blame the report. A known emergency requires the site emergency response, while a planned work change needs competent reassessment before restart. Keep the distinction clear. A successful earlier visit does not overrule current conditions. After a failure, record what changed and check the correction before relying on the same lone arrangement again for the next person.
19. Decision 3: apply and review The employer considers the device rollout complete once tracking is enabled. Workers have not been told who monitors alerts or that location data is also being used for attendance scoring.
What needs review?
Only how often location points are collected. An assumption that buying devices authorises any use of the data. The complete safety response and transparent proportionate data use through the competent organisational route. (supported response) Technology needs a working safety purpose and suitable privacy arrangements.
20. Revisit the control or support boundary What needs review?
Only how often location points are collected. An assumption that buying devices authorises any use of the data. The complete safety response and transparent proportionate data use through the competent organisational route. (supported response) Technology needs a working safety purpose and suitable privacy arrangements.
21. Decision 3 explained Technology needs a working safety purpose and suitable privacy arrangements.
Check the complete chain without collecting unnecessary tracking data.
22. Verify the arrangement and respect privacy Check the complete chain without collecting unnecessary tracking data.
Use monitoring proportionately for the safety purpose. Explain the location or alarm information collected, who sees it and the retention and response arrangements. Continuous tracking should not be silently repurposed as performance surveillance; use the organisation’s competent privacy process for such decisions.
Use monitoring proportionately for the safety purpose. Explain the location or alarm information collected, who sees it and the retention and response arrangements. Continuous tracking should not be silently repurposed as performance surveillance; use the organisation’s competent privacy process for such decisions.
Assurance should sample task understanding, working contact, controller cover and a safe missed-contact exercise. Record defects and verify the response rather than count device issues. Review after a task, site, staffing or technology change. The optional fictional exercise maps a remote visit from permission to return and identifies the point where one failed assumption stops the task. It develops planning questions without approving real lone work, collecting an actual worker’s route or authorising rescue.
23. Act on changed conditions Make a decision at each point and use the feedback before continuing.
Make a decision at each point and use the feedback before continuing.
Stage 1: What should the worker do? The approved safe route is flooded and contact is unreliable.
Use the safe hold or withdrawal route and report the failed assumptions. — Supported choice. Support a current control decision. Continue because the visit is short. — Reconsider. Duration does not repair failed access or contact. Investigate machinery while waiting for a signal. — Reconsider. That extends the task beyond the plan. Stage 2: What should happen before using the same arrangement? Management tests a missed check-in and nobody responds.
Treat the sent alert as a passed drill. — Reconsider. Transmission alone is incomplete. Correct and retest monitoring and safe response, or change the lone arrangement. — Supported choice. Verify the failed chain before reliance. Delete the drill record. — Reconsider. That hides a material failure. 24. Compare the reasoning: Act on changed conditions What should the worker do? Use the safe hold or withdrawal route and report the failed assumptions. What should happen before using the same arrangement? Correct and retest monitoring and safe response, or change the lone arrangement.
Make a decision at each point and use the feedback before continuing.
Stage 1: What should the worker do? The approved safe route is flooded and contact is unreliable.
Use the safe hold or withdrawal route and report the failed assumptions. — Supported choice. Support a current control decision. Continue because the visit is short. — Reconsider. Duration does not repair failed access or contact. Investigate machinery while waiting for a signal. — Reconsider. That extends the task beyond the plan. Stage 2: What should happen before using the same arrangement? Management tests a missed check-in and nobody responds.
Treat the sent alert as a passed drill. — Reconsider. Transmission alone is incomplete. Correct and retest monitoring and safe response, or change the lone arrangement. — Supported choice. Verify the failed chain before reliance. Delete the drill record. — Reconsider. That hides a material failure. 25. Apply the lesson in a fictional workplace Fictional case: a maintenance worker visits a remote store after hours. The plan permits a visual inspection, but the gate has changed, mobile coverage is unreliable and the worker is asked to investigate a machine fault alone.
Check the complete chain without collecting unnecessary tracking data.
26. Take the learning into a fictional task Check the complete chain without collecting unnecessary tracking data.
Task and people Fictional case: a maintenance worker visits a remote store after hours. Control or support Distinguish an alarm from a complete response system. Check and review Check the complete chain without collecting unnecessary tracking data.
27. Explain your reasoning without the answer sheet Use the supplied case facts. Explain why a choice fits the task and what remains uncertain. A points total or completed form cannot replace the required control or support arrangement.
28. Continue with the full course and Knowledge Hub Use the original course for its six lessons, required activities, final assessment and saved record. This optional companion does not change course grades, completion or certificates.
Enable JavaScript for interactive practice, or use the PowerPoint and its notes.