Focused awareness learning based on SHAREhub pages. Apply the actual workplace arrangements and your role; completion is not practical competence or permission for specialist work.
This reader supplies the complete teaching. Use the interactive LMS course for assessed activities, saved progress and completion.
LESSON 1
Separate hazard from task risk
Explain what classification, CLP and REACH information does.
Explore an enlarged section of hair-bearing skin, with a hand and forearm for context. Layers, glands, nerves and vessels are enlarged for clarity.
Use the task in this lesson to identify contact, repeated wet work or contamination. Which change reduces contact before relying on gloves?
educational illustration · healthy anatomy; enlarged details and teaching colours.View full detail ↗Lungs and airways in the chest
Locate the lungs, branching airways and diaphragm below them. The cutaway reveals structures normally hidden by the chest wall.
Trace the source-to-breathing-zone route in this lesson. Which change would prevent the contaminant reaching the person?
educational illustration · healthy anatomy; enlarged details and teaching colours.
Existing SHAREhub photographic illustration. The written fictional case supplies the condition and decision evidence.
Separate hazard from task risk
Classification identifies a substance or mixture’s health, physical and environmental hazards. CLP communicates relevant hazards through labelling and packaging. REACH operates across the supply chain and can affect information, restrictions and permitted uses. These are connected functions, not three names for a workplace assessment.
A safety data sheet brings supplier information into workplace decisions. Use it to ask about exposure, ignition, storage, compatibility, disposal and emergency planning. Then examine the actual task: quantity, concentration, temperature, application, surroundings and people exposed. A compliant-looking container cannot establish that spraying, heating or mixing is safe in your workplace. This course explains user and purchaser questions; it does not qualify participants to classify chemicals, approve restricted uses or make specialist legal or technical decisions.
Applied case
The supervisor accepts the new concentrate because a label and safety data sheet exist. Nobody has examined spraying, room ventilation or nearby workers in the proposed job.
One product, different exposures
The same chemical can create different exposure when wiped, sprayed or heated. Assess the work method and setting rather than transfer approval from the container alone.
Test your decision
What is missing?
An assessment of the actual use and effective controls, informed by the supplier information.
Only another copy of the same label.
Nothing because supply information authorises every workplace task.
Compare the explanation
An assessment of the actual use and effective controls, informed by the supplier information.
Hazard communication is an input to the task decision, not the decision itself.
Chemical hazard pictograms · examples and checksOptional reference · all nine symbols · does not change assessment requirements
READ THE LABEL · UNDERSTAND THE TASK
Recognise the symbol. Read the full label. Assess the actual task.
Examples illustrate possible uses of a symbol, not the classification of every formulation. A product can carry several pictograms. Check its current label, hazard statements and matching safety data sheet (SDS).
Chemical labels: recognise all nine symbols, then read the statements and matching SDS.
CLP/GHS hazard pictograms: meanings and illustrative examples
Pictogram and hazard
What it can mean
Example and question before work
ExplosiveGHS01
Explosion, blast or projection hazards; also certain self-reactive substances and organic peroxides.
Example: Certain fireworks or reactive chemical products.Ask: Does the authorised task account for impact, heat and the product’s stability limits?
FlammableGHS02
Can ignite; also used for certain self-heating, pyrophoric or water-reactive hazards.
Example: Petrol or some solvent-based products.Ask: What could release vapour or ignite it during this task, including nearby work?
OxidisingGHS03
Can cause or intensify fire; some strong oxidisers present an explosion hazard.
Example: Oxygen or certain oxidising chemicals.Ask: What incompatible materials and contamination must the assessed storage and connection keep apart?
Gas under pressureGHS04
Pressurised gas may burst if heated; refrigerated gas can cause cold burns.
Example: Compressed-gas cylinders.Ask: Have the gas identity, cylinder, connection and pressure or temperature hazards been checked?
CorrosiveGHS05
May damage metals, cause severe skin burns or cause serious eye damage; read the stated hazard.
Example: Certain drain cleaners, acids or alkalis.Ask: Which contact and splash routes must be prevented in this actual handling or dilution task?
Acute toxicityGHS06
Can be toxic or fatal after short exposure through the stated route.
Example: Methanol or certain pesticide products.Ask: Which exposure routes and emergency arrangements does this product’s information identify?
Harmful / irritantGHS07
May indicate harmful acute toxicity, irritation, skin sensitisation, drowsiness or dizziness; also ozone-layer hazards.
Example: Some detergents or cleaning products.Ask: What do the hazard statements say? Do not dismiss this as a harmless or mild product.
Serious health hazardGHS08
Can indicate cancer, genetic or reproductive harm, organ damage, respiratory sensitisation or aspiration hazard.
Example: Petrol or some sensitising chemical products.Ask: Which particular health effect is stated, and how does the task prevent the relevant exposure?
Hazardous to the environmentGHS09
Hazardous to aquatic life, potentially with long-lasting effects.
Example: Certain pesticides, biocides or fuels.Ask: How will the assessed arrangements prevent release to drains, water or soil?
Read beyond the picture · Open a prompt to compare the explanation.
Is the exclamation mark the same as the chest-starburst symbol?
No. The two symbols communicate different groups of hazards. Read the actual hazard statements: skin sensitisation and respiratory sensitisation are not interchangeable, and neither symbol specifies the complete task controls.
Does a bottle with no pictogram prove the task is safe?
No. Work may generate hazardous dust, fume or mist, and exposure depends on the task. Resolve missing or conflicting identification before use. A pictogram is not a compatibility chart or a complete workplace risk assessment.
Which information turns recognition into a useful work decision?
Match the product and SDS revision. Read the hazard statements and relevant SDS sections for handling, storage, exposure control, emergencies and reactivity together. Then check the actual task assessment and controls. A safety data sheet is not itself a COSHH assessment.
Fisher Scientific UK · BP2618 range · CAS 67-63-0 Revision 19 · 13 October 2023
This learning example refers to the identified supplier edition. It is not a replacement SDS or confirmation that this is the latest sheet for a product you hold. Obtain the current matching supplier SDS before real use.
Below is SHARE’s learning annotation, not a rebranded supplier document or a complete safety data sheet.
Identity
Propan-2-ol / isopropanol; the referenced sheet identifies a laboratory-grade product.
Section 2 signals
Danger; flame and exclamation-mark pictograms. H225, H319 and H336 identify flammability, eye irritation and possible drowsiness/dizziness.
Section 3 composition
The referenced sheet lists isopropyl alcohol above 95% by weight.
Section 8 decision
Engineering measures and several glove-material options appear. Check the complete conditions; no single glove or respirator is selected by this lesson.
Section 9 example
A 12°C closed-cup flash point is listed. This is product data, not a workplace exposure reading or an automatic safe-temperature limit.
Explore every section
1. Identification
Match the product, supplier, intended use and emergency contact to the actual container. A familiar chemical name alone may not identify a formulation.
2. Hazards identification
Read classification, pictograms, signal word and hazard/precautionary statements together. Identify the routes and outcomes the task must prevent.
3. Composition / ingredients
Check concentration and relevant ingredients. A diluted mixture, hardener or changed formulation may need different information and assessment.
4. First-aid measures
Prepare product-specific first-aid arrangements and ready access to the full sheet. Do not replace the workplace emergency procedure with a memory exercise.
5. Firefighting measures
Provide the relevant information to the site fire-planning route. An SDS does not authorise an untrained worker to fight a chemical fire.
6. Accidental release
Plan who raises the alarm, isolates the area and deals with a spill within their training. Confirm available equipment and the boundary for specialist help.
7. Handling and storage
Translate the supplier conditions into the actual transfer, storage, access and housekeeping method. Consider other work and incompatible neighbours.
8. Exposure controls / PPE
Read exposure limits, engineering controls and residual PPE together. Check jurisdiction, units and averaging period. Verify control performance and exact glove/RPE suitability.
9. Physical / chemical properties
Consider volatility, flash point, state and other relevant properties at the actual temperature and method. Odour is not a reliable exposure measurement.
10. Stability / reactivity
Identify incompatible materials, conditions to avoid and possible decomposition. Check the whole process and waste stream, not just separate containers.
11. Toxicological information
Connect the health effects to possible inhalation, skin, eye and ingestion exposure. Use competent advice where specialist interpretation is needed.
12. Ecological information
Plan to prevent environmental release, including drains and water. Lack of a fish/tree symbol does not grant permission to discharge.
13. Disposal considerations
Specify the responsible waste route for the product, contaminated materials and containers. Do not assume evaporation or dilution is an acceptable disposal method.
14. Transport information
Check transport classification through the relevant competent route. Supply pictograms and transport labels have different functions.
15. Regulatory information
Identify relevant restrictions and market scope, then check workplace duties separately. A regulatory entry is not a completed COSHH assessment.
16. Other information
Check revision history, abbreviations and supporting statements. Trace material changes into the assessment, instructions, storage and briefing.
Worked COSHH application · fictional laboratory proposal
Define the proposed use
Fictional laboratory task: wipe small parts for 10 minutes twice per shift, using a proposed 50mL working quantity at ambient temperature. Record the exact product, method, location, people and frequency. These are exercise assumptions, not authorised operating limits.
Find the exposure and application differences
Compare a controlled dispensing/wiping proposal with spraying the same liquid over an open surface near other work. Spray, surface area, ventilation, duration, splashes and nearby people change the assessment even though the SDS is unchanged. Confirm the proposed use is suitable.
Work through the control hierarchy
First ask whether the task can avoid the chemical or use a verified safer method. If it remains necessary, assess release prevention, suitable dispensing, enclosure or ventilation before residual PPE. Do not invent a dilution or declare a small quantity safe.
Specify and verify the real controls
Use sections 7–10 together with competent task assessment. Identify ventilation performance, compatible equipment and the exact glove selection/breakthrough evidence for the job. Consider fire and explosion controls alongside health exposure. Do not copy a generic PPE line and call the work controlled.
Plan the whole job
Include setup, transfer, use, cleaning, storage, waste, maintenance and foreseeable upset. Identify who is exposed, who owns each action, training, first aid, spill arrangements and the separate emergency response boundary.
Record, brief and review
Record significant findings, remaining actions and evidence needed before release. Check controls in use. Reassess for changed product, concentration, quantity, temperature, spraying, location, equipment, symptoms, incidents or new supplier information.
Worked decision: HOLD the proposed task until the matching product/use information, exposure and ignition assessment, control verification and emergency arrangements are resolved by the responsible competent people. This learning example does not issue an operational assessment or authorise work.
Photorealistic illustrative UK workplace scene. Review checks: Registration: Information is submitted about substances manufactured or imported above relevant thresholds. Evaluation: Authorities assess information and concerns. Authorisation: Certain high-concern substances need permission for specific uses.
Read the complete label
A label identifies the product and supplier and communicates hazards and precautions. Red-diamond pictograms highlight major hazard types, but one symbol can accompany different statements. Read the signal word, hazard statements and precautionary information together rather than learn only a picture and guess a control.
A flame symbol prompts questions about ignition and storage; a corrosion symbol prompts questions about contact, compatible containment and emergency arrangements. Multiple hazards can need controls that work together. Check labels at receipt and point of use, including decanted containers. An unlabelled bottle creates uncertainty about identity and precautions. Do not identify a liquid by colour, smell or a remembered nickname. Hold uncertain use and resolve the information through the responsible supplier or workplace assessment route.
Applied case
A worker recognises one pictogram on the concentrate but ignores the written hazard statements. The decanted bottle has no product identity because everyone is expected to recognise its colour.
A symbol is not a prescription
A pictogram prompts relevant hazard questions. It cannot specify every glove, storage condition or emergency action without the actual product information and assessed use.
Test your decision
What should be corrected?
Only memorising the bottle’s colour.
Removing written statements because symbols say everything.
Readable product identity and complete hazard/precaution information at the point of use.
Compare the explanation
Readable product identity and complete hazard/precaution information at the point of use.
A symbol is an alert, not a complete task instruction or reliable product identification.
Check identity, revision and the scope of supplier information.
Existing SHAREhub 2D teaching schematic. Use alongside the explanation and fictional case in this lesson.
Match the safety data sheet
Check that the safety data sheet matches the actual supplier, product and formulation, and that the revision is current for the information being used. Similar trade names do not establish identical composition or hazards. Missing, contradictory or unclear information needs clarification rather than an invented assumption.
A sheet describes supply hazards and handling advice; it may not fully describe contaminants generated by a workplace process. Cutting dust or welding fume needs material and process evidence even when there is no purchased product called “fume” with its own sheet. Compare task conditions with the information and assessment. If the sheet is missing or for another formulation, hold the affected use until suitable information and review resolve it. Filing a document proves availability, not suitable control.
Applied case
Stores attaches last year’s sheet for a differently concentrated cleaner because its trade name resembles the new product. The supervisor plans to use it without contacting the supplier.
A library can contain the wrong answer
An accessible sheet helps only if it is the right information for the product and use. Check formulation, revision and task assumptions rather than count documents in the register.
Test your decision
What needs resolution?
An assumption that similar names guarantee identical hazards.
Correct product-specific information and review of the actual task before affected use.
Only changing the date on the old sheet.
Compare the explanation
Correct product-specific information and review of the actual task before affected use.
Match identity and scope before relying on supplier advice.
Find control, compatibility and response information without cherry-picking.
Photorealistic illustrative UK workplace scene. Review checks: Elimination: Avoid an unnecessary corrosive cleaner or open-decanting task at a workshop wash station. Substitution: Trial a less hazardous, ready-to-use formulation; compare the whole hazard profile and cleaning performance before approval. Engineering: Use a chemically compatible closed dispensing connection and splash containment instead of pouring concentrate near the face. Administrative: Keep product identity, approved use, SDS revision and task instruction together at the wash station; brief a replacement or contractor worker. PPE: Select chemical splash eye/face protection and compatible gloves for remaining contact risk; include fit, other PPE and cleaning/replacement limits.
Use the relevant sections together
Different safety data sheet sections support different questions. Hazard identification informs what can go wrong; handling and storage, exposure controls and stability information help planning. First-aid, fire and spill information supports suitable emergency arrangements. Disposal information informs the waste route. Read relevant sections together.
Do not select one reassuring sentence while ignoring incompatible storage or a changed application method. Supplier PPE advice still needs task and wearer assessment, and an emergency washing arrangement does not prevent the initial contact. Where information is unclear, obtain competent clarification. This awareness lesson does not teach treatment, spill response or equipment design. It teaches how to find the questions that the responsible assessment and trained roles must resolve before the chemical enters routine work.
Applied case
The purchaser reads only the glove advice and places the concentrate beside a product with unresolved compatibility. The team has no agreed response if a container leaks.
Response is a later layer
Fire, spill or first-aid information helps consequence planning. It does not replace avoiding incompatible storage, preventing contact and controlling the release at source.
Test your decision
What broader review is needed?
The relevant handling, compatibility, exposure and emergency information for the assessed storage and task.
Only whether a glove box has been ordered.
A rule that all cleaning chemicals can share any shelf.
Compare the explanation
The relevant handling, compatibility, exposure and emergency information for the assessed storage and task.
Relevant information must be translated into compatible controls, not selected one item at a time.
Prioritise safer methods and a ready task arrangement.
Existing SHAREhub photographic illustration. The written fictional case supplies the condition and decision evidence.
Gate purchase and use together
Chemical control begins before purchase or introduction. Ask whether the hazardous product or method is necessary, whether a safer substitute works and what new risks it introduces. Prefer effective source and engineering controls before reliance on instructions and personal protection alone. Match storage, transfer and disposal to the actual product.
Procurement, stores, the assessor and operational owner need a clear handover. The label and sheet must become practical instructions, equipment, suitable training and stop triggers. A product approved for wiping is not automatically approved for spraying in a small room. Check that nearby people and process-generated contaminants are considered. Do not bring a new chemical into use simply because its price or supplier is familiar; resolve the assessment and workable controls first.
Applied case
The supervisor substitutes spraying for the assessed wipe method to work faster in a small room. The concentrate was purchased before ventilation, storage or user briefing was considered.
Approval has a defined use
A chemical register entry should connect to the assessed task and conditions. It does not grant unlimited permission for higher concentration, heating, spraying or mixing.
Test your decision
What should happen?
Assume any use of an approved product is covered.
Add gloves alone without reviewing inhalation or other hazards.
Hold the changed use for assessment and suitable controls rather than carry over the wiping approval.
Compare the explanation
Hold the changed use for assessment and suitable controls rather than carry over the wiping approval.
Method and environment can materially change exposure and the required controls.
Use a change to update affected work rather than just the library.
Photorealistic illustrative UK workplace scene. Review checks: Procurement gate: No SDS and classification review, no purchase. Chemical register: Classification, pictograms, SDS date, location and owner. COSHH link: SDS changes trigger assessment review.
Trace revisions and market scope
A revised sheet, changed classification or new supplier can affect existing controls. Trace the change to relevant assessments, storage arrangements, instructions and users. Record what changed, who reviewed it and what evidence supports continued use; merely replacing the register date does not demonstrate reassessment.
Chemical supply frameworks differ between Great Britain and Northern Ireland. Confirm the destination, supplier role and applicable current information through competent procurement and regulatory advice rather than assume one market’s route applies everywhere. Ordinary users should escalate uncertainty, not self-classify or interpret restrictions unaided. The optional exercise follows a fictional cleaner from receipt to task and revision. It creates questions and a controlled handover outline, without approving an actual product, submitting a COSHH record or specifying a chemical treatment or mixing procedure.
Applied case
The supplier revises hazard and storage advice. Procurement replaces the file, but the old task card and shelf arrangement remain in use and nobody tells the operational owner.
A revision is a trigger
Ask what the changed information means for the task and store. A new document date is evidence of a file update, not proof that necessary controls or instructions changed.
Test your decision
What follow-up is required?
An assumption that a familiar brand cannot change risk.
Trace the changed information to affected uses, controls and briefings and verify the revised decision.
Only a newer filename in the library.
Compare the explanation
Trace the changed information to affected uses, controls and briefings and verify the revised decision.
Information management succeeds when material changes reach the actual work.
End-of-course revision · Drag each symbol to its hazard name, or use the menu on each card with touch or keyboard. This is practice alongside the separate final assessment.
Acute toxicity
Corrosive
Explosive
Flammable
Gas under pressure
Harmful / irritant
Hazardous to the environment
Oxidising
Serious health hazard
Match all nine symbols, then check your choices.
Need the reference table?Chemical hazard pictograms · examples and checksOptional reference · all nine symbols · does not change assessment requirements
READ THE LABEL · UNDERSTAND THE TASK
Recognise the symbol. Read the full label. Assess the actual task.
Examples illustrate possible uses of a symbol, not the classification of every formulation. A product can carry several pictograms. Check its current label, hazard statements and matching safety data sheet (SDS).
CLP/GHS hazard pictograms: meanings and illustrative examples
Pictogram and hazard
What it can mean
Example and question before work
ExplosiveGHS01
Explosion, blast or projection hazards; also certain self-reactive substances and organic peroxides.
Example: Certain fireworks or reactive chemical products.Ask: Does the authorised task account for impact, heat and the product’s stability limits?
FlammableGHS02
Can ignite; also used for certain self-heating, pyrophoric or water-reactive hazards.
Example: Petrol or some solvent-based products.Ask: What could release vapour or ignite it during this task, including nearby work?
OxidisingGHS03
Can cause or intensify fire; some strong oxidisers present an explosion hazard.
Example: Oxygen or certain oxidising chemicals.Ask: What incompatible materials and contamination must the assessed storage and connection keep apart?
Gas under pressureGHS04
Pressurised gas may burst if heated; refrigerated gas can cause cold burns.
Example: Compressed-gas cylinders.Ask: Have the gas identity, cylinder, connection and pressure or temperature hazards been checked?
CorrosiveGHS05
May damage metals, cause severe skin burns or cause serious eye damage; read the stated hazard.
Example: Certain drain cleaners, acids or alkalis.Ask: Which contact and splash routes must be prevented in this actual handling or dilution task?
Acute toxicityGHS06
Can be toxic or fatal after short exposure through the stated route.
Example: Methanol or certain pesticide products.Ask: Which exposure routes and emergency arrangements does this product’s information identify?
Harmful / irritantGHS07
May indicate harmful acute toxicity, irritation, skin sensitisation, drowsiness or dizziness; also ozone-layer hazards.
Example: Some detergents or cleaning products.Ask: What do the hazard statements say? Do not dismiss this as a harmless or mild product.
Serious health hazardGHS08
Can indicate cancer, genetic or reproductive harm, organ damage, respiratory sensitisation or aspiration hazard.
Example: Petrol or some sensitising chemical products.Ask: Which particular health effect is stated, and how does the task prevent the relevant exposure?
Hazardous to the environmentGHS09
Hazardous to aquatic life, potentially with long-lasting effects.
Example: Certain pesticides, biocides or fuels.Ask: How will the assessed arrangements prevent release to drains, water or soil?
Read beyond the picture · Open a prompt to compare the explanation.
Is the exclamation mark the same as the chest-starburst symbol?
No. The two symbols communicate different groups of hazards. Read the actual hazard statements: skin sensitisation and respiratory sensitisation are not interchangeable, and neither symbol specifies the complete task controls.
Does a bottle with no pictogram prove the task is safe?
No. Work may generate hazardous dust, fume or mist, and exposure depends on the task. Resolve missing or conflicting identification before use. A pictogram is not a compatibility chart or a complete workplace risk assessment.
Which information turns recognition into a useful work decision?
Match the product and SDS revision. Read the hazard statements and relevant SDS sections for handling, storage, exposure control, emergencies and reactivity together. Then check the actual task assessment and controls. A safety data sheet is not itself a COSHH assessment.