Focused awareness learning based on SHAREhub pages. Apply the actual workplace arrangements and your role; completion is not practical competence or permission for specialist work.
This reader supplies the complete teaching. Use the interactive LMS course for assessed activities, saved progress and completion.
LESSON 1
Follow the vehicle and pedestrian encounter
Follow the vehicle and pedestrian encounter.
Existing SHAREhub photographic illustration. The written fictional case supplies the condition and decision evidence.
Follow the vehicle and pedestrian encounter
A slow vehicle can still crush, trap or run over a person. A turning vehicle can sweep beyond its wheel tracks, and a load or trailer can hide someone from the driver. Walls, parked equipment and loading areas can leave pedestrians no safe space. Loads can shift or fall, vehicles can overturn and people can fall while getting on or off. These harm pathways exist in familiar yards as well as unusual work sites.
Start with the actual journeys and activities rather than the speed sign alone. Include staff, visitors, cleaners, contractors and the public where they can be exposed. Identify doors, crossings, blind corners, parking, reversing and loading. A driver acting carefully cannot compensate for every unsuitable route or person placed in the vehicle danger area.
Applied case
A reversing vehicle moves slowly beside a wall while a pedestrian waits between the wall and trailer. The team assumes the low speed removes the need to change the arrangement.
Look beyond the label
Trace the swept path and where a person could be trapped. A slowly moving vehicle can create a severe injury when separation fails, even without a high-speed collision.
Test your decision
What is the relevant concern?
A conclusion that slow movement cannot cause serious injury.
The pedestrian can still be trapped or crushed in the movement path.
Only whether the vehicle is exceeding a posted speed.
Compare the explanation
The pedestrian can still be trapped or crushed in the movement path.
Speed is one factor; the encounter and crushing space still require prevention.
Remove and separate journeys before adding warnings
Remove and separate journeys before adding warnings.
Photorealistic illustrative UK workplace scene. Review checks: Failed separation: A blocked or displaced barrier puts people into the vehicle or load path. Possible consequence: Collision, crushing, trapping or injury from a moving load can follow. Warning signs and action: Damaged barriers, poor sightlines, soft ground, unbriefed deliveries or an unprotected shortcut require affected movements to be held and reviewed.
Remove and separate journeys before adding warnings
First remove unnecessary vehicle movements and reversing where practicable. Design routes and schedules to separate people from vehicles, with suitable physical protection where risk warrants. Safe crossings, sightlines, entrances and waiting areas must fit the actual activities. Marked lines, alarms, high-visibility clothing and a marshal support a suitable layout; they do not replace it. A blocked walkway can force people into a vehicle route despite a good plan on paper.
Check how workers actually reach welfare, exits and their work areas. Include accessible routes and visiting drivers rather than assuming everyone knows a shortcut. Temporary storage and construction phases can alter the encounter points. If the work reaches a public road or footway, use the separate competent design and approval route; a private yard sketch cannot authorise a road closure or diversion.
Applied case
Pallet storage blocks the protected walkway, so workers step into the delivery route. The proposed fix is brighter clothing and another sign while leaving the storage in place.
Look beyond the label
A route works only if people can use it. Repeated shortcuts can reveal an impractical layout, blocked access or pressure that needs redesign rather than another reminder to follow painted lines.
Test your decision
Which improvement addresses the stronger control?
Restore or redesign effective pedestrian separation and the usable route.
Use clothing as a complete replacement for the walkway.
Tell pedestrians to walk faster past vehicles.
Compare the explanation
Restore or redesign effective pedestrian separation and the usable route.
The layout must provide a practical safe route rather than rely on visibility and individual reaction alone.
Existing SHAREhub 2D teaching schematic. Use alongside the explanation and fictional case in this lesson.
Match site, vehicle and driver
The safe-site, safe-vehicle and safe-driver model connects three requirements. The route needs suitable space, ground, lighting, visibility and overhead clearance. The vehicle needs to suit the load and task and remain in safe condition. The driver needs competence, authorisation and current site instructions. Strength in one area cannot automatically correct failure in another. A skilled driver cannot make an unsuitable turning space or unstable load safe simply by taking care.
Agree delivery details before arrival with the host, carrier and supplier. Confirm the actual vehicle, load information, unloading method, waiting location and communication. A larger or unfamiliar vehicle can invalidate the booked route. Hold the affected movement at the agreed safe point while responsible people resolve the mismatch instead of asking the visiting driver to invent a plan at the gate.
Applied case
A larger vehicle arrives than the one used in the route assessment. Its driver is experienced but has not received the yard instructions, and the planned turning space is uncertain.
Look beyond the label
A driver qualification is useful evidence for a person, not a certificate for this route or load. Site-specific instructions and verified compatibility remain necessary for the current delivery.
Test your decision
What should determine admission and movement?
Driver experience alone.
The booking reference as proof that every vehicle fits.
Verified compatibility of the actual vehicle, route and instructed driver.
Compare the explanation
Verified compatibility of the actual vehicle, route and instructed driver.
The actual site, vehicle and driver arrangement must be suitable together.
Control reversing and communication without exposing a guide
Control reversing and communication without exposing a guide.
Photorealistic illustrative UK workplace scene. Review checks: Elimination: Move the loading point or redesign circulation so vehicles enter and leave forwards without crossing a pedestrian route. Substitution: Use smaller vehicles, off-site consolidation or a timed remote drop where the load, road access and handling assessment permit it. Engineering controls: Install physical pedestrian barriers, protected crossings, suitable gates, lighting and a marked reversing bay with adequate clearance and ground capacity. Administrative controls: Book arrivals, brief drivers at entry, prohibit unscheduled reversing, use an agreed signaller only where needed and keep visitors out of manoeuvring zones. PPE: Provide high-visibility clothing suited to light and weather for authorised people who must enter the traffic area, while checking it does not snag or obscure other protection.
Control reversing and communication without exposing a guide
Avoid or reduce reversing by suitable layout and planning where practicable. Where residual movement needs guidance, the method must provide competent people, agreed communication, visibility and a safe position. A guide should not stand in a crushing area or walk backwards into danger to make a poor route work. A warning alarm or camera has limitations and does not establish that every blind area is clear.
Use the agreed stop rule if communication or sight is lost or someone enters the danger area. Do not replace the planned signal with competing instructions from passers-by. Review why reversing is needed and whether the route can be changed. A marshal is a supporting control, not automatic permission to use an unsuitable layout or mix pedestrians with the vehicle.
Applied case
A guide stands in the narrowing space behind a reversing vehicle. The driver loses the agreed view, but another worker waves from a different position to keep the delivery moving.
Look beyond the label
Adding a person can add a casualty if their position is unsafe. The guiding method must protect that person and preserve a clear stop response when the agreed communication fails.
Test your decision
What is the appropriate decision?
Ask the guide to remain in the trapping space.
Stop using the agreed safe rule and restore a workable coordinated method.
Choose whichever signal is easiest to see and continue.
Compare the explanation
Stop using the agreed safe rule and restore a workable coordinated method.
Guidance must not expose the guide or replace the required clear communication and safe route.
Existing SHAREhub photographic illustration. The written fictional case supplies the condition and decision evidence.
Keep loading and waiting arrangements live
Agree the loading or unloading method before the vehicle arrives. Check the load, equipment, surface, lighting, people and driver waiting or observation position. Keep pedestrians out of the vehicle and load operating area and prevent unplanned vehicle movement through the agreed system. The host, carrier and supplier have responsibilities to coordinate; the driver should not be left to discover the safe method while standing in a live bay.
During work, control other arrivals and preserve communication. If a load has shifted, do not release restraints or open it by guesswork where material could fall. Obtain a suitable method from the responsible competent loading team. Anyone who needs to approach should first request and confirm the planned stop. Completion must be clear before the vehicle or pedestrians are released back through the area.
Applied case
A driver leaves the designated waiting position to ask about paperwork while unloading continues. At the same time, damaged wrapping raises uncertainty about the next part of the load.
Look beyond the label
A waiting area is useful only when it works for communication and welfare. Check why a person needs to leave it, then preserve the safe approach and stop arrangements during loading.
Test your decision
What needs resolution?
Safe separation and a suitable accepted response to the changed load before affected work continues.
Only a faster paperwork process.
A request that the driver avoid eye contact with the operator.
Compare the explanation
Safe separation and a suitable accepted response to the changed load before affected work continues.
People and load conditions must remain within the agreed method throughout unloading.
Photorealistic illustrative UK workplace scene. Review checks: Rain and soft ground: Check support and traction; hold until the route is suitable. Barrier moved for pallets: Restore a suitable protected route or redesign delivery. Unbriefed HGV driver: Hold at a safe waiting point and brief the route and stop point.
Restore the route before restarting movement
Stop affected movement when a barrier, route, load, vehicle condition, visibility or driver briefing fails. The safe waiting and stopping arrangements must be part of the plan, not improvised inside a conflict. Rain, storage, contractor activity and changing delivery peaks can invalidate an earlier check. A signed route sheet is not permission to continue when pedestrians are forced into the vehicle path or the unloading area is unavailable.
Resolve the cause through the responsible site roles. Clear or redesign the route, coordinate affected people and verify separation before restart. After the operation, restore access and barriers, check the area and communicate remaining restrictions. Near misses and recurring workarounds are evidence for improvement. An updated drawing alone does not prove that the changed arrangement works where the vehicle actually moves.
Applied case
The blocked route is redrawn on a plan, but pallets still prevent access and the new pedestrian arrangement has not been briefed. The next vehicle waits to be admitted.
Look beyond the label
Follow a route defect from report to workface. A plan revision is an action; clear usable separation, current instructions and verified operating conditions are the evidence for the next movement.
Test your decision
What supports restarting the affected movement?
The revised drawing alone.
The fact that the next driver is waiting.
Implemented and verified route controls with communication to affected people.
Compare the explanation
Implemented and verified route controls with communication to affected people.
Close-out needs the real route and people arrangements restored, not merely edited paperwork.