Optional presentation practice. Choices and model launches do not write LMS grades, completion or certificates.
Construction teaching and guided site-model practice
Asbestos is the name for a group of naturally occurring fibrous minerals. It was used for heat resistance, fire protection, strength and durability. In a construction job, that history translates into insulation, boards, cement products, coatings, floors and old plant. The hazard can sit behind an ordinary finish.
Broken corrugated material and fibrous debris are discovered outside the surveyed work area.
Identify the workface and who could be exposed. Use the written scenario to establish conditions that the model cannot show.
Use the cutaway to explore typical locations. The numbered locations are examples of where asbestos may occur, not a survey of a real building. Finding a similar-looking item on site does not confirm asbestos; an unmarked or unfamiliar location is not cleared by this diagram. Start with your proposed task.
An inaccessible area remains uncertain. Resolve the scope before access or change the design through the planning route.
Fictional refurbishment: a new cable fixing passes into a riser excluded from the available survey.
This choice leaves the case unresolved. An inaccessible area remains uncertain. Resolve the scope before access or change the design through the planning route.
Supported answer: Hold the intrusive work until the gap is competently resolved
Redevelopment can expose demolition rubble, made ground, old service trenches, slabs, foundations and buried plant. Past removal or demolition may have left asbestos-containing fragments or residues mixed with other material. A current building survey may say nothing about that ground.
The crew has an old drawing, but altered load paths, post-tensioned components, services and hazardous materials have not been established.
Unrecognised structural systems and live services can cause sudden collapse, release or electrocution; hidden asbestos and lead add health risks.
This addresses one part of the observation, but leaves a material exposure or missing control. Read the immediate action and verify the workface conditions.
This would leave people exposed or treat an assumption as evidence. Stop and establish the required controls before continuing.
This protects people now. The management and verification stages address safe continuation and prevention of recurrence.
Supported answer: Hold demolition and obtain competent surveys and a safe method and sequence matched to the actual structure.
Hold demolition and obtain competent surveys and a safe method and sequence matched to the actual structure.
You notice suspect material before it has been disturbed. Stop the affected task immediately. Avoid further contact and make the tools or plant safe without disturbing the material. Warn others so they do not continue the same activity or walk into the area. Prevent access using the site arrangements from a safe position.
You are working on a pre-2000 industrial unit. The job includes internal strip-out, a new service route, slab breaking and drainage diversion. A management survey is in the site office.
Return to the first model scenario: Broken corrugated material and fibrous debris are discovered outside the surveyed work area.
Documents support assurance, but the check must establish that the intended safeguards are present, effective and maintained.
An absence of accidents is not evidence that a control works. Use the task-specific inspection, test and competent review.
Use this task-specific evidence before accepting the control as effective.
Supported answer: Confirm identification, scope, plan and required controls before restart; check clearance or handback requirements and provide suitable follow-up for potential exposure.
Confirm identification, scope, plan and required controls before restart; check clearance or handback requirements and provide suitable follow-up for potential exposure.
Asbestos is the name for a group of naturally occurring fibrous minerals. It was used for heat resistance, fire protection, strength and durability. In a construction job, that history translates into insulation, boards, cement products, coatings, floors and old plant.
What is the purpose of the course pocket card?
This choice leaves the case unresolved. A memory aid supports a site briefing. It cannot supply the task-specific evidence or competence.
A memory aid supports a site briefing. It cannot supply the task-specific evidence or competence.
Supported answer: It supports memory while the actual work follows site information and authorisation
Use the full course for required learning, activities and the separate assessment. These optional presentation choices do not write course grades or completion.
The PowerPoint contains the presentation and notes. Enable JavaScript for the online choices and classification activity.