FREE CONSTRUCTION TRAINING · SH-ASB-01

Asbestos awareness in construction

Surveyor documenting intact older building fabric before refurbishment
Illustrative workplace context for this course.

Recognise asbestos risks, check task information and rehearse stop-work decisions.

£0Free training
Approx. 2h–2h 30mEstimated self-paced learning
24 lessons5 modules
25 questionsFinal assessment
Open this course in the LMS →

Full public teaching and readers are free to read without an account. A free learner account is required for confirmed saved assessment, completion and certificate records in the LMS.

What you will work through

Use practical construction examples, source imagery and task decisions to connect the teaching with the evidence needed before work starts or restarts.

The course has 5 modules and 24 lessons, with teaching, applied activities, feedback and a check of understanding throughout. The asbestos reference uses illustrated location exploration, source photographs and scenario activities. Public interactive practice is separate from confirmed LMS assessment and completion records.

Explore the interactive practice copy. Return to the LMS route for recorded learning.

Learning outcomes

Course outline

MODULE 1

Understand the risk

What asbestos is, how fibres are released and where awareness ends.

  1. The risk is still on today’s site
  2. You cannot use your senses to judge exposure
  3. Bonded, friable and damaged: why the task matters
  4. What this course prepares you to do
MODULE 2

Check before tools start

Explore likely locations, read the survey and match information to your task.

  1. Explore the building: what could your task disturb?
  2. The survey must answer your job’s question
  3. Read the register like a work instruction
  4. Make the check relevant to your trade
  5. Five checks before the tool touches fabric
  6. Asbestos does not cancel the other hazards
MODULE 3

Hidden below your boots

Use the supplied site photographs to practise decisions around rubble, slabs and spoil.

  1. The old building may now be in the ground
  2. Four real-photo decisions
  3. Mixed debris defeats a quick visual clearance
  4. The bucket, the stockpile and the haul road
  5. The groundworks briefing that helps you act
MODULE 4

Stop, protect and report

Rehearse a calm response to discovery, dust, affected clothing and pressure to restart.

  1. A calm response to unexpected material
  2. If dust has already been released
  3. Give a report someone can act on
  4. Who owns the next decision?
  5. Restart is a decision with evidence
  6. After the event: support and learning
MODULE 5

Bring it together

Apply the learning to an industrial refurbishment and make your own site action plan.

  1. Your job: industrial unit refurbishment
  2. Take it back to your next site
  3. Ready for the assessment

Assessment and completion

Complete the required lessons and activities, then take the 25-question final assessment. The pass threshold is 80% plus every designated critical safety answer. Points and badges cannot compensate for a critical error.

Use the LMS to save and resume confirmed progress. Certificate availability follows its passed-completion and grade conditions. Browser practice and printed learning pages do not issue the official LMS record.

Independent construction learning. Completion records learning within the course scope; competent site assessment, practical training and task authorisation remain necessary. It does not confer a NEBOSH qualification.

Sources and learning provenance

The teaching draws on public SHAREhub topic pages and structured source records, with original fictional workface cases. Use the linked primary guidance and the applicable jurisdiction when planning a live task.

Course version 2026.10.19.1 · SH-ASB-01. Factual source identity and jurisdiction are retained in the .

Questions about this course

Is this course free?

Yes. The training is £0. Full public teaching and readers can be used without an account. A free learner account is required for confirmed saved assessment, completion and certificate records in the LMS.

How long should I allow?

Approx. 2h–2h 30m: approximately 120–150 minutes of self-paced learning, including required activities and one final-assessment attempt. Your pace, review and retries may increase the time. Save and resume in the LMS.

Can I study without a 3D-capable browser?

Yes. The complete learning reader is available in ordinary HTML. Where this course includes model practice, an accessible text route provides the same decision sequence. Use the interactive LMS course to complete its assessed requirements.

What do I need to pass?

Complete the required learning and achieve at least 80% in the final assessment, with every critical safety answer correct. Follow the feedback and review the relevant lesson before retrying.

Where is my completion record?

The LMS holds confirmed grades, completion and certificate records for your learner account. Public browser practice has its own separate progress and is not an official completion record.

Does completion authorise construction work?

Independent construction learning. Completion records learning within the course scope; competent site assessment, practical training and task authorisation remain necessary. It does not confer a NEBOSH qualification.

Open this course in the LMS →Compare all construction courses

Presentation and model workshop

Use the same course imagery, worked decisions and source case in a 28-slide teaching companion. Practise classification, compare explained choices and inspect the linked model case.

Open the interactive presentation workshop · Download PowerPoint

This optional companion does not replace the required course activities or final assessment.