Full public teaching and readers are free without an account. A free learner account is required for saved LMS progress and recorded assessment. Completion and any course-completion certificate depend on the configured LMS conditions. Open the course overview.
110–175 minutes · Includes activities, model practice and assessment.
Independent awareness and decision learning for vehicle repair. Practical competence, EV high-voltage work, asbestos work and other specialist tasks require separate training and authorisation. GB baseline; check corresponding Northern Ireland duties and local arrangements.
Understand this repair environment
Keep exposure controlled during mixing, spraying, clearance, cleaning and curing.
Follow the work, not just the equipment
The paint process is more than the time the spray gun is triggered. Product mixing, gun cleaning, entry after spraying and the curing cycle each create different exposure or process conditions. Identify the actual product and task using its current safety information and the site assessment. Do not infer safety from the colour, smell, trade name or absence of a visible cloud.
Isocyanate-containing spray mist can cause occupational asthma. Fine airborne mist can persist after the visible spray has disappeared. The booth and the air-fed respiratory protection perform different jobs: enclosure and extraction control the spread, while suitable air-fed protection protects the person working within the spray atmosphere. The protective system must be maintained through the relevant work and clearance period. Opening a visor to inspect the finish can defeat the arrangement at the moment exposure remains.
Clearance time belongs to the specific booth or room and its verified conditions. Never borrow a convenient number from another booth or guess it by sight. Faults, changes, maintenance and operating modes require review of the applicable controls. Exposure monitoring checks control performance; health surveillance looks for early health effects. One does not replace the other or invalidate a worker’s symptoms.
Fictional applied case
Booth 2 has a posted clearance time, but filters and fan settings were changed yesterday without verification. A sprayer lifts their visor to inspect the finish while another colleague prepares to enter. Booth 3 has an extraction alarm. The supervisor points to an earlier normal monitoring result and asks production to continue.
Use source guidance to distinguish control selection, work instructions and evidence of effectiveness.
How should isocyanate exposure be controlled?
Controls should eliminate or minimise aerosol and skin exposure before relying on behaviour.
Start with product and task assessment. Remove isocyanate spraying where feasible; otherwise combine verified booth extraction and clearance with protected spraying and exposure checks. The hierarchy table distinguishes engineering control from air-fed RPE. HSG276 - Isocyanate paint spraying.
In a two-pack vehicle-paint job, the first choice is whether the finish can be achieved without isocyanate spray. If spraying remains necessary, the technical lead confirms the product and booth specification; the sprayer checks extraction and air supply before entry, keeps others out during the measured mist-clearance period and uses the specified air-fed protection. A failed booth test, unknown product or symptom report stops the task and triggers exposure review. HSE HSG276 explains the spray-booth control approach.
Control priority
Practical control
Example
Eliminate
Avoid isocyanate product or spraying where possible.
Use non-isocyanate alternative or prefinished component.
Substitute
Replace the product or process with an assessed less hazardous alternative where feasible. Quantity reduction is minimisation, and improved spray equipment is engineering/process control; neither is automatically substitution.
A genuinely lower-hazard replacement needs assessment. HVLP can improve transfer efficiency but residual isocyanate mist remains and required spray protection still applies.
Engineering
Enclose or separate the task and capture aerosol or fume at source.
Verify booth or local exhaust ventilation, access control and bystander separation.
Administrative
Brief, supervise and stop unsafe practices.
No visor lifting, no uncontrolled cleaning.
Personal protection
Use suitable gloves, coveralls, eye protection and BA.
RPE programme and skin protection.
Apply the guidance to this garage
Clearance time belongs to the specific booth or room and its verified conditions. Never borrow a convenient number from another booth or guess it by sight. Faults, changes, maintenance and operating modes require review of the applicable controls. Exposure monitoring checks control performance; health surveillance looks for early health effects. One does not replace the other or invalidate a worker’s symptoms.
The source section sets out the wider principles. In the garage, apply them to this exact observation: A sprayer is preparing a two-pack coating with only a disposable dust mask. The worker’s immediate protective response is Do not spray until the booth and suitable air-fed breathing apparatus are ready and working. The supervisor must then resolve the arrangement and verify A trained sprayer performs the specified booth and air-fed apparatus checks; the responsible manager verifies suitable breathing-air supply, maintenance and controlled access.
Fictional applied case
The sprayer has air-fed equipment but lifts the visor after each coat to see whether the metallic finish is even.
Isocyanate spraying: the booth and breathing protection work together
Contain the mist and protect the person inside it; both controls must remain effective through the full task.
Understand the garage task
Booth 1 contains a sprayer preparing a two-pack coating while wearing a disposable dust mask. Some two-pack products contain isocyanates that can cause occupational asthma and skin disease. Spraying creates very fine mist; the absence of visible haze or a strong smell does not demonstrate control. The enclosure helps keep the mist away from other workers, but the sprayer is still inside the contaminated atmosphere.
Consider safer suitable coatings and methods before selecting exposure controls. For isocyanate spraying, suitable air-fed breathing apparatus is required alongside an effective spray booth or room. A filtering dust mask is unsuitable for this task. The breathing-air supply must deliver the manufacturer’s required flow and suitable air quality; ordinary compressed workshop air must not be assumed fit to breathe. Keep the protection in use throughout spraying and the applicable clearance and exit procedure, including when checking the finish.
Locate the lungs, branching airways and diaphragm below them. The cutaway reveals structures normally hidden by the chest wall.
Trace the source-to-breathing-zone route in this lesson. Which change would prevent the contaminant reaching the person?
educational illustration · healthy anatomy; enlarged details and teaching colours.
What effective control looks like
Do not start spraying until booth ventilation, access controls and suitable air-fed breathing apparatus are available and working.
Check the breathing apparatus, airline and low-flow warning according to the instructions; maintain a protected, suitable breathing-air supply.
Keep the visor down in the contaminated area; use maintained lighting and clean visor covers to see the work.
Control skin contact with suitable clothing and gloves, and train sprayers and nearby workers in clearance, faults and symptom reporting.
How should isocyanate exposure be controlled?
Controls should eliminate or minimise aerosol and skin exposure before relying on behaviour.
Start with product and task assessment. Remove isocyanate spraying where feasible; otherwise combine verified booth extraction and clearance with protected spraying and exposure checks. The hierarchy table distinguishes engineering control from air-fed RPE. HSG276 - Isocyanate paint spraying.
In a two-pack vehicle-paint job, the first choice is whether the finish can be achieved without isocyanate spray. If spraying remains necessary, the technical lead confirms the product and booth specification; the sprayer checks extraction and air supply before entry, keeps others out during the measured mist-clearance period and uses the specified air-fed protection. A failed booth test, unknown product or symptom report stops the task and triggers exposure review. HSE HSG276 explains the spray-booth control approach.
Control priority
Practical control
Example
Eliminate
Avoid isocyanate product or spraying where possible.
Use non-isocyanate alternative or prefinished component.
Substitute
Replace the product or process with an assessed less hazardous alternative where feasible. Quantity reduction is minimisation, and improved spray equipment is engineering/process control; neither is automatically substitution.
A genuinely lower-hazard replacement needs assessment. HVLP can improve transfer efficiency but residual isocyanate mist remains and required spray protection still applies.
Engineering
Enclose or separate the task and capture aerosol or fume at source.
Verify booth or local exhaust ventilation, access control and bystander separation.
Administrative
Brief, supervise and stop unsafe practices.
No visor lifting, no uncontrolled cleaning.
Personal protection
Use suitable gloves, coveralls, eye protection and BA.
RPE programme and skin protection.
Verify before release
Observe the complete job, including inspecting the finish and leaving the booth; unsafe visor lifting can defeat protection.
Use appropriate exposure monitoring and health surveillance to challenge assumptions that new equipment or good technique is enough.
Use the evidence in a repair decision
Contain the mist and protect the person inside it; both controls must remain effective through the full task.
For this case, the observation is: A sprayer is preparing a two-pack coating with only a disposable dust mask. Keep the observation distinct from an inferred cause. Isocyanates in some two-pack paints can cause occupational asthma and skin disease; mist may be invisible. Compare the controls in the guide with what is actually present, identify the unresolved gap and state who must resolve it before the task or route is released.
Fictional applied case
The sprayer has air-fed equipment but lifts the visor after each coat to see whether the metallic finish is even.
Booth clearance: a stopped spray gun is not clear air
Protect the period after spraying as carefully as spraying itself; the clearance decision belongs to the specific booth.
Understand the garage task
At Booth 2, a colleague reaches for the door just after spraying stops. The quiet gun and a clear-looking window are misleading: isocyanate mist may still be suspended. An unprotected person entering to move the car, inspect the finish or collect a tool can be exposed even though they did not spray anything. The same issue arises if the sprayer lifts their breathing visor too early.
Each booth needs its own measured clearance time and a safe entry and exit procedure. The three booths in this garage are separate systems; a time measured for one cannot simply be copied to the others. Airflow, filters, layout and changes to the booth influence performance. Keep extraction operating as required and follow the displayed procedure until clearance is satisfied. A countdown is useful only when it reflects verified conditions and people understand what starts it and what happens after an interruption.
What effective control looks like
Restrict unprotected access during spraying and the verified clearance period, with understandable signs and a clear status indication.
Keep required air-fed breathing protection on while inside contaminated conditions and follow the established protected exit procedure.
Arrange competent clearance testing and display the result for that specific booth; reconsider it after relevant changes or faults.
Train valeters, mechanics, visitors and supervisors as well as sprayers so delivery pressure does not trigger premature entry.
How can the hierarchy of controls reduce airborne exposure before relying on local exhaust ventilation?
LEV is an engineering control after elimination and substitution have been considered; the actual task still needs verification.
HSE HSG258 treats the hood, source, worker and airflow as one system. For a body-filler sanding task, ERICPD below links the five-level hierarchy to the owner and failure decision. A capture test should observe the actual sanding position and cross-draught, not only a fan reading.
If the contaminant crosses the breathing zone or the tool position changes beyond the designed capture zone, stop sanding, adjust the method and verify capture before restart. RPE may be needed for residual exposure but does not repair a failed source control.
How can the ERICPD hierarchy of controls reduce airborne exposure before relying on local exhaust ventilation?
ERICPD is a planning crossmap. Its prompts do not add a sixth rung or rank Isolate above engineering. Discipline verifies and sustains every control level.
Worked activity: Task application for LEV Local Exhaust Ventilation
Activity and release context
If the contaminant crosses the breathing zone or the tool position changes beyond the designed capture zone, stop sanding, adjust the method and verify capture before restart. RPE may be needed for residual exposure but does not repair a failed source control.
Buy prefinished parts or avoid dusty cutting/sanding where feasible.
Process owner checks feasibility; undocumented process change holds work.
Reduce
Substitution
Use a lower-dust product and less dust-generating tool/method.
COSHH assessor checks product and process; new material triggers review.
Isolate / Control
Engineering controls
Fit task-specified on-tool extraction/LEV, enclose or separate the emission, and provide make-up air.
LEV designer commissions capture under real task conditions; escape stops work.
Control
Administrative controls
Position hood/tool correctly, check airflow indicator, clean safely and maintain filters.
User pre-use check plus supervisor observation; alarm or damaged hose stops work.
PPE
PPE
Provide suitable RPE and other protection for remaining exposure.
Competent selector checks fit and condition; failed RPE stops exposure work.
Discipline
Sustaining all levels
Investigate defects, compare TExT to commissioning, act on worker reports and retest changes.
Manager closes defects and verifies a later shift; recurring failure triggers redesign.
How can the ISO 45001 hierarchy of controls reduce airborne exposure before relying on local exhaust ventilation?
The hierarchy of controls in ISO 45001:2018 comes under Clause 8.1.2 (Eliminating hazards and reducing OH&S risks), which is located within Clause 8 ("Operation").
Worked activity: Task application for LEV Local Exhaust Ventilation
Activity and release context
If the contaminant crosses the breathing zone or the tool position changes beyond the designed capture zone, stop sanding, adjust the method and verify capture before restart. RPE may be needed for residual exposure but does not repair a failed source control.
Buy prefinished parts or avoid dusty cutting/sanding where feasible.
Process owner checks feasibility; undocumented process change holds work.
Reduce
Substitution
Use a lower-dust product and less dust-generating tool/method.
COSHH assessor checks product and process; new material triggers review.
Isolate / Control
Engineering controls
Fit task-specified on-tool extraction/LEV, enclose or separate the emission, and provide make-up air.
LEV designer commissions capture under real task conditions; escape stops work.
Control
Administrative controls
Position hood/tool correctly, check airflow indicator, clean safely and maintain filters.
User pre-use check plus supervisor observation; alarm or damaged hose stops work.
PPE
PPE
Provide suitable RPE and other protection for remaining exposure.
Competent selector checks fit and condition; failed RPE stops exposure work.
Discipline
Sustaining all levels
Investigate defects, compare TExT to commissioning, act on worker reports and retest changes.
Manager closes defects and verifies a later shift; recurring failure triggers redesign.
Verify before release
Compare the displayed time and booth identity with the actual test evidence, rather than accepting a copied notice.
Observe the handover after spraying and confirm nobody removes protection or enters early to speed up vehicle movement.
Check that extraction condition, filter maintenance and fault procedures support the clearance arrangement in real use.
Use the evidence in a repair decision
Protect the period after spraying as carefully as spraying itself; the clearance decision belongs to the specific booth.
For this case, the observation is: Spraying has stopped, but someone reaches for the door before the clearance indication ends. Keep the observation distinct from an inferred cause. Invisible mist remains after the gun stops; each booth needs its own verified clearance time. Compare the controls in the guide with what is actually present, identify the unresolved gap and state who must resolve it before the task or route is released.
Fictional applied case
Booth 2 has been repaired and fitted with different filters. A supervisor suggests keeping Booth 1’s clearance time on its door.
Booth extraction fault: recognise a failed safety barrier
A fault warning is a stop-and-investigate signal; restore and verify the barrier before restoring production.
Understand the garage task
Booth 3 has an airflow warning and a gap in its filter-maintenance record. Hearing the fan run does not establish adequate extraction: a loaded filter, damaged duct, unsuitable replacement part or restricted replacement air can change the system’s performance. Paint mist and vapours may then remain in the booth or escape into neighbouring areas. The pressure to keep all three booths productive must not become permission to override the warning.
Treat the booth as a complete exposure-control system. The enclosure, filters, fan, duct, replacement air, controls and outdoor discharge each have a role. Overspray filters collect particles; they do not automatically remove solvent vapours. Maintenance and competent examination support continued performance, while pre-use checks detect faults between scheduled visits. After repair, confirm safe operation and whether clearance information needs review. An invoice or a reset warning light is insufficient evidence for production release.
What effective control looks like
Stop spraying safely and keep the affected booth out of service while the extraction fault is investigated.
Report the observed indication and work conditions; do not silence alarms, bypass interlocks or open doors to continue production.
Use competent maintenance with secure isolation and coordination so repair work does not expose the contractor or other sprayers.
Maintain filters and the complete system to the specified condition, keeping performance, defects and corrective actions traceable.
What if the LEV fails during a task?
Stop the emitting process, withdraw or isolate affected people as needed, and do not restart until the fault is repaired and effective control is competently verified.
In a fictional Riverside workshop, a low-flow alarm sounds during sanding and visible dust escapes. The operator stops sanding, leaves extraction running only if it is safe and useful, and tells the supervisor. The supervisor restricts access, checks for affected people and quarantines the unit. Maintenance finds a blocked filter and damaged duct; it replaces and repairs them without exposing cleaners. A competent person checks indicator, flow and capture with representative sanding. The supervisor reviews whether dust escaped beyond the work area, arranges any exposure follow-up and records a separate restart decision. A new filter or green lamp alone is not enough. See HSE.
Task material and setting: Dry-sand a wooden panel in a fictional maintenance workshop; dust reaches adjacent bench when extraction fails.
People and prerequisites: Operator, supervisor, maintainer and nearby staff; known material, operating benchmark, fault procedure and suitable cleaning method.
Before: Check capture, indicator, collector and work-zone segregation.
During: Low-flow alarm and dust escape trigger immediate stop and access restriction.
Hold or stop: No sanding, sweeping or substitute extractor until the exposure and equipment are assessed.
Completion and hand back: Repair filter/duct, verify flow and actual capture, assess spread and exposure, then named site release.
Check measured or indicated performance against the commissioning standard after repair, including replacement-air arrangements.
Confirm relevant alarms and interlocks work and that any changed clearance time or operating instruction is communicated.
Observe restart under representative use and inspect safe containment and discharge, rather than only checking that the fan turns.
Use the evidence in a repair decision
A fault warning is a stop-and-investigate signal; restore and verify the barrier before restoring production.
For this case, the observation is: The booth airflow warning is active and the filter-maintenance record has a gap. Keep the observation distinct from an inferred cause. A fan running does not prove that contaminated air is controlled or that the booth is safe. Compare the controls in the guide with what is actually present, identify the unresolved gap and state who must resolve it before the task or route is released.
Fictional applied case
A contractor replaces the filter and resets the alarm. The supervisor asks to spray immediately because the vehicle is already masked.
Paint mixing: identify the product and control every exposure route
Chemical hazard pictograms · examples and checksOptional reference · all nine symbols · does not change assessment requirements
READ THE LABEL · UNDERSTAND THE TASK
Recognise the symbol. Read the full label. Assess the actual task.
Examples illustrate possible uses of a symbol, not the classification of every formulation. A product can carry several pictograms. Check its current label, hazard statements and matching safety data sheet (SDS).
Paint mixing: read each component’s actual health and physical hazard information before the assessed task.
CLP/GHS hazard pictograms: meanings and illustrative examples
Pictogram and hazard
What it can mean
Example and question before work
ExplosiveGHS01
Explosion, blast or projection hazards; also certain self-reactive substances and organic peroxides.
Example: Certain fireworks or reactive chemical products.Ask: Does the authorised task account for impact, heat and the product’s stability limits?
FlammableGHS02
Can ignite; also used for certain self-heating, pyrophoric or water-reactive hazards.
Example: Petrol or some solvent-based products.Ask: What could release vapour or ignite it during this task, including nearby work?
OxidisingGHS03
Can cause or intensify fire; some strong oxidisers present an explosion hazard.
Example: Oxygen or certain oxidising chemicals.Ask: What incompatible materials and contamination must the assessed storage and connection keep apart?
Gas under pressureGHS04
Pressurised gas may burst if heated; refrigerated gas can cause cold burns.
Example: Compressed-gas cylinders.Ask: Have the gas identity, cylinder, connection and pressure or temperature hazards been checked?
CorrosiveGHS05
May damage metals, cause severe skin burns or cause serious eye damage; read the stated hazard.
Example: Certain drain cleaners, acids or alkalis.Ask: Which contact and splash routes must be prevented in this actual handling or dilution task?
Acute toxicityGHS06
Can be toxic or fatal after short exposure through the stated route.
Example: Methanol or certain pesticide products.Ask: Which exposure routes and emergency arrangements does this product’s information identify?
Harmful / irritantGHS07
May indicate harmful acute toxicity, irritation, skin sensitisation, drowsiness or dizziness; also ozone-layer hazards.
Example: Some detergents or cleaning products.Ask: What do the hazard statements say? Do not dismiss this as a harmless or mild product.
Serious health hazardGHS08
Can indicate cancer, genetic or reproductive harm, organ damage, respiratory sensitisation or aspiration hazard.
Example: Petrol or some sensitising chemical products.Ask: Which particular health effect is stated, and how does the task prevent the relevant exposure?
Hazardous to the environmentGHS09
Hazardous to aquatic life, potentially with long-lasting effects.
Example: Certain pesticides, biocides or fuels.Ask: How will the assessed arrangements prevent release to drains, water or soil?
Read beyond the picture · Open a prompt to compare the explanation.
Is the exclamation mark the same as the chest-starburst symbol?
No. The two symbols communicate different groups of hazards. Read the actual hazard statements: skin sensitisation and respiratory sensitisation are not interchangeable, and neither symbol specifies the complete task controls.
Does a bottle with no pictogram prove the task is safe?
No. Work may generate hazardous dust, fume or mist, and exposure depends on the task. Resolve missing or conflicting identification before use. A pictogram is not a compatibility chart or a complete workplace risk assessment.
Which information turns recognition into a useful work decision?
Match the product and SDS revision. Read the hazard statements and relevant SDS sections for handling, storage, exposure control, emergencies and reactivity together. Then check the actual task assessment and controls. A safety data sheet is not itself a COSHH assessment.
Fisher Scientific UK · BP2618 range · CAS 67-63-0 Revision 19 · 13 October 2023
This learning example refers to the identified supplier edition. It is not a replacement SDS or confirmation that this is the latest sheet for a product you hold. Obtain the current matching supplier SDS before real use.
Below is SHARE’s learning annotation, not a rebranded supplier document or a complete safety data sheet.
Identity
Propan-2-ol / isopropanol; the referenced sheet identifies a laboratory-grade product.
Section 2 signals
Danger; flame and exclamation-mark pictograms. H225, H319 and H336 identify flammability, eye irritation and possible drowsiness/dizziness.
Section 3 composition
The referenced sheet lists isopropyl alcohol above 95% by weight.
Section 8 decision
Engineering measures and several glove-material options appear. Check the complete conditions; no single glove or respirator is selected by this lesson.
Section 9 example
A 12°C closed-cup flash point is listed. This is product data, not a workplace exposure reading or an automatic safe-temperature limit.
Explore every section
1. Identification
Match the product, supplier, intended use and emergency contact to the actual container. A familiar chemical name alone may not identify a formulation.
2. Hazards identification
Read classification, pictograms, signal word and hazard/precautionary statements together. Identify the routes and outcomes the task must prevent.
3. Composition / ingredients
Check concentration and relevant ingredients. A diluted mixture, hardener or changed formulation may need different information and assessment.
4. First-aid measures
Prepare product-specific first-aid arrangements and ready access to the full sheet. Do not replace the workplace emergency procedure with a memory exercise.
5. Firefighting measures
Provide the relevant information to the site fire-planning route. An SDS does not authorise an untrained worker to fight a chemical fire.
6. Accidental release
Plan who raises the alarm, isolates the area and deals with a spill within their training. Confirm available equipment and the boundary for specialist help.
7. Handling and storage
Translate the supplier conditions into the actual transfer, storage, access and housekeeping method. Consider other work and incompatible neighbours.
8. Exposure controls / PPE
Read exposure limits, engineering controls and residual PPE together. Check jurisdiction, units and averaging period. Verify control performance and exact glove/RPE suitability.
9. Physical / chemical properties
Consider volatility, flash point, state and other relevant properties at the actual temperature and method. Odour is not a reliable exposure measurement.
10. Stability / reactivity
Identify incompatible materials, conditions to avoid and possible decomposition. Check the whole process and waste stream, not just separate containers.
11. Toxicological information
Connect the health effects to possible inhalation, skin, eye and ingestion exposure. Use competent advice where specialist interpretation is needed.
12. Ecological information
Plan to prevent environmental release, including drains and water. Lack of a fish/tree symbol does not grant permission to discharge.
13. Disposal considerations
Specify the responsible waste route for the product, contaminated materials and containers. Do not assume evaporation or dilution is an acceptable disposal method.
14. Transport information
Check transport classification through the relevant competent route. Supply pictograms and transport labels have different functions.
15. Regulatory information
Identify relevant restrictions and market scope, then check workplace duties separately. A regulatory entry is not a completed COSHH assessment.
16. Other information
Check revision history, abbreviations and supporting statements. Trace material changes into the assessment, instructions, storage and briefing.
Worked COSHH application · fictional laboratory proposal
Define the proposed use
Fictional laboratory task: wipe small parts for 10 minutes twice per shift, using a proposed 50mL working quantity at ambient temperature. Record the exact product, method, location, people and frequency. These are exercise assumptions, not authorised operating limits.
Find the exposure and application differences
Compare a controlled dispensing/wiping proposal with spraying the same liquid over an open surface near other work. Spray, surface area, ventilation, duration, splashes and nearby people change the assessment even though the SDS is unchanged. Confirm the proposed use is suitable.
Work through the control hierarchy
First ask whether the task can avoid the chemical or use a verified safer method. If it remains necessary, assess release prevention, suitable dispensing, enclosure or ventilation before residual PPE. Do not invent a dilution or declare a small quantity safe.
Specify and verify the real controls
Use sections 7–10 together with competent task assessment. Identify ventilation performance, compatible equipment and the exact glove selection/breakthrough evidence for the job. Consider fire and explosion controls alongside health exposure. Do not copy a generic PPE line and call the work controlled.
Plan the whole job
Include setup, transfer, use, cleaning, storage, waste, maintenance and foreseeable upset. Identify who is exposed, who owns each action, training, first aid, spill arrangements and the separate emergency response boundary.
Record, brief and review
Record significant findings, remaining actions and evidence needed before release. Check controls in use. Reassess for changed product, concentration, quantity, temperature, spraying, location, equipment, symptoms, incidents or new supplier information.
Worked decision: HOLD the proposed task until the matching product/use information, exposure and ignition assessment, control verification and emergency arrangements are resolved by the responsible competent people. This learning example does not issue an operational assessment or authorise work.
Match controls to the real substance and the way it is handled; mixing, spraying and cleaning have different exposure pathways.
Understand the garage task
At the mixing bench, open unlabelled hardener and thinner sit beside contaminated gloves. The hazard depends on the actual formulation and the task, not the paint colour or a general water-based label. Skin and eye contact, vapour inhalation and spills need consideration. Isocyanate-containing hardeners also require attention to sensitisation and dermatitis. An unknown decanted liquid must not be guessed from its smell or its position on the bench.
Use the supplier’s safety information to inform a task-specific COSHH assessment; the data sheet alone is not the assessment. Compare safer suitable products, minimise open handling and keep containers closed when not in use. Mixing has a different exposure pattern from spraying: a properly controlled mixing task should not automatically inherit every spraying rule, but it still requires suitable ventilation, contact protection and safe waste handling. Plan the mixing-room ventilation and flammable-liquid precautions together so controlling one hazard does not create another.
Explore an enlarged section of hair-bearing skin, with a hand and forearm for context. Layers, glands, nerves and vessels are enlarged for clarity.
Use the task in this lesson to identify contact, repeated wet work or contamination. Which change reduces contact before relying on gloves?
educational illustration · healthy anatomy; enlarged details and teaching colours.
What effective control looks like
Pause use of unidentified containers until contents, labels and required precautions are established.
Use a designated, suitably ventilated mixing area with only the quantities needed and controlled dispensing that reduces spills.
Choose gloves and eye protection for the actual products and task; replace contaminated protection without transferring chemicals to skin.
Keep lids on containers and hazardous waste, segregate incompatible materials and provide appropriate washing and spill-response arrangements.
How can the ISO 45001 hierarchy of controls guide COSHH exposure controls before relying on health surveillance?
Choose prevention and reliable engineering control before procedures or PPE; verify the actual equipment and task.
For isocyanate two-pack spray paint, assess a non-isocyanate coating or off-site process first. If spraying remains, use an enclosed extracted booth with clearance time and suitable air-fed breathing equipment, plus controlled gun cleaning, training and checks. The HSE spray-painter guide specifies these controls; HSENI COSHH sets the NI hierarchy. Stop spraying for failed extraction, unknown clearance time or missing air supply; do not rely on a better mask alone.
On a small screen, scroll this table sideways to read all columns.
How can the ERICPD hierarchy of controls guide COSHH exposure controls before relying on health surveillance?
ERICPD is a planning crossmap. Its prompts do not add a sixth rung or rank Isolate above engineering. Discipline verifies and sustains every control level.
Worked activity: Task application for What should you know about COSHH control measures and health surveillance?
Activity and release context
For isocyanate two-pack spray paint, assess a non-isocyanate coating or off-site process first. If spraying remains, use an enclosed extracted booth with clearance time and suitable air-fed breathing equipment, plus controlled gun cleaning, training and checks. The HSE spray-painter guide specifies these controls; HSENI COSHH sets the NI hierarchy. Stop spraying for failed extraction, unknown clearance time or missing air supply; do not rely on a better mask alone.
Specify non-spray or off-site finished part if feasible.
Designer records option; hold spray if safe no-spray route works.
Substitute / reduce
Select compatible lower-hazard coating after assessment.
Coatings engineer approves; stop on unknown chemistry.
Engineering / isolate and control
Extracted booth with verified clearance and safe air supply.
Booth lead tests; stop on failed extraction or air.
Administrative / discipline
COSHH assessment, cleaning, maintenance and access control.
Supervisor inspects; hold on failed clearance.
PPE / PPE
Task-specific air-fed RPE and skin protection.
Trainer checks; no spray if protection fails.
How can the ISO 45001 hierarchy of controls guide COSHH exposure controls before relying on health surveillance?
The hierarchy of controls in ISO 45001:2018 comes under Clause 8.1.2 (Eliminating hazards and reducing OH&S risks), which is located within Clause 8 ("Operation").
Worked activity: Task application for What should you know about COSHH control measures and health surveillance?
Activity and release context
For isocyanate two-pack spray paint, assess a non-isocyanate coating or off-site process first. If spraying remains, use an enclosed extracted booth with clearance time and suitable air-fed breathing equipment, plus controlled gun cleaning, training and checks. The HSE spray-painter guide specifies these controls; HSENI COSHH sets the NI hierarchy. Stop spraying for failed extraction, unknown clearance time or missing air supply; do not rely on a better mask alone.
Specify non-spray or off-site finished part if feasible.
Designer records option; hold spray if safe no-spray route works.
Substitute / reduce
Select compatible lower-hazard coating after assessment.
Coatings engineer approves; stop on unknown chemistry.
Engineering / isolate and control
Extracted booth with verified clearance and safe air supply.
Booth lead tests; stop on failed extraction or air.
Administrative / discipline
COSHH assessment, cleaning, maintenance and access control.
Supervisor inspects; hold on failed clearance.
PPE / PPE
Task-specific air-fed RPE and skin protection.
Trainer checks; no spray if protection fails.
HSE five-level hierarchy complements ERICPD. For this spray process, the competent designer specifies the booth/extraction for the actual coating, spray load, workpiece geometry, mist generation, air supply and discharge. Competent commissioning verifies installed compatibility and effective exposure control under representative conditions and records performance benchmarks, acceptance, user instructions and maintenance duties before use; see HSE LEV commissioning. MR2 (January2025) supports measured/displayed clearance time, negative-pressure containment, breathing-air quality and equipment checks. Before each job, check extraction, airlines, RPE and damage; monitor booth condition and performance during use, and reassess process changes. Keep maintenance, clearance and examination results and act on defects. Stop failed extraction or unsafe air supply; correct the cause, recheck required performance and clearance, and authorise restart only when control is restored.
Verify before release
Observe measuring, pouring and cleaning to check whether the written assessment matches actual contact and inhalation opportunities.
Check product identity, current safety information, glove suitability and ventilation arrangements before new materials are introduced.
Look for contaminated handles, reused gloves and recurring spills; confirm changes remove the cause rather than only improve tidiness.
Use the evidence in a repair decision
Match controls to the real substance and the way it is handled; mixing, spraying and cleaning have different exposure pathways.
For this case, the observation is: Unlabelled open containers and contaminated gloves sit on the paint-mixing bench. Keep the observation distinct from an inferred cause. Contact and inhalation risks depend on the actual product; two-pack hardeners may contain isocyanates. Compare the controls in the guide with what is actually present, identify the unresolved gap and state who must resolve it before the task or route is released.
Fictional applied case
A new hardener arrives in the same brand packaging. A mixer suggests using the existing glove and spill instructions without checking it.
Spray and bake: control the change of operating mode
Treat access during a curing cycle as a controlled process change, with clear conditions for interruption, entry and restart.
Understand the garage task
A worker wants to enter the booth during its bake cycle to recover a tool. Curing adds heat while coatings can continue to release flammable vapours. The control state that permits spraying is different from the state needed for baking or safe access. A visit still places someone inside the process, and holding the door open or defeating an interlock can undermine its designed sequence.
Keep people out during drying or curing and follow the supplier’s safe shutdown, cooling and access procedure. The required sequence depends on the installed booth or oven; this scene does not provide a universal safe temperature or elapsed time. Ventilation, temperature control, safety interlocks and any relevant detection or emergency provisions must work together. Plan tool checks before starting a cycle and manage interruptions deliberately so a missing item does not become an improvised override.
What effective control looks like
Check the booth is clear of people and unnecessary items before starting the spray or bake sequence.
Control access during curing and prohibit bypassing door interlocks or other protective functions for convenience.
Use the manufacturer’s safe interruption and access arrangements, allowing competent isolation where maintenance rather than ordinary access is needed.
Maintain ventilation and thermal safety controls, and train workers in faults, emergency actions and authorised return to service.
Which prevention and mitigation controls should be selected?
DSEAR controls should follow the risk pathway: remove or reduce dangerous substances, prevent release, prevent explosive atmospheres, avoid ignition and reduce consequences.
Control selection should match the failure mechanism. If a release could occur from poor equipment integrity, training alone is weak. If the problem is too much material in a workroom, a new sign is weak. If the risk is ignition in a zoned area, the answer may include equipment suitability, hot-work control, static control and inspection.
Mitigation is still needed where prevention cannot remove the risk. This may include explosion relief, suppression, isolation, fire protection, emergency shutdown, evacuation and spill/environmental control.
DSEAR control layers
Layer
Examples
Evidence
LayerEliminate or substitute
ExamplesRemove the dangerous substance or use a less dangerous material/process.
EvidenceSubstitution review and procurement decision.
LayerMinimise quantity
ExamplesKeep only shift quantities at point of use and reduce stock levels.
EvidenceInventory and inspection records.
LayerPrevent release
ExamplesClosed systems, proper containers, maintenance, level control and compatible equipment.
EvidenceInspection, maintenance and proof test records.
LayerPrevent atmosphere
ExamplesVentilation, extraction, containment, inerting and cleaning.
EvidenceVentilation tests, gas-free certificates and cleaning records.
LayerAvoid ignition
ExamplesEx equipment, hot-work control, static control and no-smoking rules.
EvidenceEx register, permits and earthing checks.
LayerSeparate and protect
ExamplesSegregation, bunds, fire resistance, separation distances and layout.
EvidenceStore inspection, drawings and fire risk assessment.
LayerMitigate
ExamplesExplosion relief, suppression, emergency shutdown, alarms, evacuation and emergency plans.
EvidenceCommissioning, drills and emergency plan review.
Stop or restrict activity that relies on an unavailable credited barrier. A competent assessment must establish and verify any suitable time-limited alternative before reliance; manager or senior approval alone does not establish safety.
Specific official context: HSE DSEAR in detail. HSE GB supports dangerous-substance risk principles; HSENI-approved L138 supplies separate NI context only where cited. Examples require competent task assessment and field evidence; engineering design, alarm values and named legal/technical approval remain held.
Verify before release
Check that the actual operating mode and access status are understood at the booth, not inferred from whether the fan is audible.
Arrange competent functional checks of relevant interlocks, alarms and temperature controls against the design requirements.
Review interrupted cycles and near misses to see whether storage, preparation or production planning encourages shortcuts.
Use the evidence in a repair decision
Treat access during a curing cycle as a controlled process change, with clear conditions for interruption, entry and restart.
For this case, the observation is: A worker wants to enter the booth during curing to retrieve a tool. Keep the observation distinct from an inferred cause. Heat and flammable vapours create risks that need the booth’s designed operating sequence. Compare the controls in the guide with what is actually present, identify the unresolved gap and state who must resolve it before the task or route is released.
Fictional applied case
The missing tool is visible through the window. A colleague offers to hold the door switch so the cycle can continue while it is collected.
Breathing symptoms: separate exposure checks from health surveillance
Good exposure results do not cancel a symptom report; prevention, monitoring and early health action reinforce each other.
Understand the garage task
The worker beside Booth 3 reports chest tightness after spraying. Work-related asthma can affect someone even when symptoms occur later, away from the booth. A manager should listen and arrange prompt medical or occupational-health advice rather than diagnose the cause or dismiss it because the equipment is new. Acute breathing difficulty belongs in the garage’s first-aid and emergency arrangements; a learning exercise is not a clinical assessment.
Use two distinct evidence streams. Biological monitoring can show whether isocyanate exposure is occurring and help investigate control failures. Health surveillance looks for early work-related ill health under an appropriate competent programme. A satisfactory urine result from one sampled shift is not a diagnosis and cannot rule out asthma or all other exposures. Review products, spraying, breathing-air equipment, visor lifting, clearance, mixing and skin contact, then act on the findings and check whether corrections work.
What effective control looks like
Encourage prompt reporting of chest tightness, wheeze, cough or breathlessness, including symptoms noticed after leaving work.
Arrange medical or occupational-health advice and review further exposure without waiting for the next scheduled surveillance appointment.
Maintain appropriate asthma and skin health surveillance alongside representative biological monitoring for isocyanate spray work.
Investigate adverse exposure results and symptoms fairly, implement controls and protect confidential clinical information.
How should biological monitoring be understood?
Bodyshop decision: exposure monitoring and health surveillance
For the selected GB isocyanate spray-painting task, establish the COSHH regulation 10 exposure-monitoring plan; HSE identifies urine testing as the practical approach. This is distinct from regulation 11 health surveillance: a questionnaire or lung-function check does not replace the exposure check. A competent provider specifies representative spray work, sample timing, units, interpretation and follow-up. An abnormal result prompts investigation of controls and repeat assessment; it does not diagnose asthma or identify the entry route. A non-exposure-day sample cannot demonstrate control of the spray task.
Biological monitoring measures chemical uptake into the body and can reveal exposure that air monitoring or PPE checks miss.
A chemical can enter the body through inhalation, skin absorption, ingestion or accidental injection. Air sampling may tell you what is in the breathing zone, but biological monitoring can show what has actually entered the worker by all routes combined. HSE health and biological monitoringCOSHH Regulations (NI) 2003
This is particularly useful where skin absorption is significant, PPE is heavily relied on, work practices vary or a chemical has a suitable biological guidance value. It still needs careful consent, sampling timing, secure handling and competent interpretation. A result should never be treated as an isolated number; it should be compared with the task, controls, route of entry, PPE, training and worker feedback.
A urine or blood result can indicate uptake across inhalation and skin routes, but it is not by itself a diagnosis or automatically a statutory surveillance test. Occupational-health advice determines sampling, interpretation and action; investigate the process and controls when uptake suggests exposure. HSE health and biological monitoring
Verify before release
Confirm workers know how to report symptoms and receive timely competent advice without being told to self-diagnose.
Check monitoring was representative, correctly timed and interpreted by the provider, with follow-up and retesting where indicated.
Verify practical changes to exposure controls and work arrangements, while retaining the separate health-surveillance programme.
Use the evidence in a repair decision
Good exposure results do not cancel a symptom report; prevention, monitoring and early health action reinforce each other.
For this case, the observation is: A worker mentions breathing symptoms after spraying but thinks a new mask is the only answer. Keep the observation distinct from an inferred cause. Symptoms may indicate occupational asthma and require prompt attention; PPE alone does not prove control. Compare the controls in the guide with what is actually present, identify the unresolved gap and state who must resolve it before the task or route is released.
Fictional applied case
A sprayer has a recent low urine-monitoring result but now reports wheezing on evenings after work.
Combine the observations, restrictions and verification into one justified work decision.
Read the whole case before releasing a part
Booth 2 has a posted clearance time, but filters and fan settings were changed yesterday without verification. A sprayer lifts their visor to inspect the finish while another colleague prepares to enter. Booth 3 has an extraction alarm. The supervisor points to an earlier normal monitoring result and asks production to continue.
Hold affected spraying and entry, maintain the required respiratory protection and obtain competent verification of booth performance and clearance before release; respond separately to any health symptoms.
Separate immediate protection from the investigation of causes. Use factual observations, the actual equipment and task information, and the appropriate competent roles. Where the evidence is missing, keep the affected operation restricted rather than treating uncertainty as permission.
Build the release evidence
Booth 1: isocyanate spray mist: A trained sprayer performs the specified booth and air-fed apparatus checks; the responsible manager verifies suitable breathing-air supply, maintenance and controlled access.
Booth 2: entering before mist clears: A competent person verifies the booth-specific clearance test remains applicable; the supervisor checks the displayed time and observes staff following entry and exit controls.
Booth 3: extraction fault: A competent person confirms the fault is repaired and extraction and safety controls function correctly; authorised staff verify safe performance before releasing the booth for use.
Open hardener and thinner at the mixing bench: A competent assessor checks the real mixing task against product information; the supervisor observes containment, ventilation, correct labels and suitable uncontaminated protective equipment.
Bake cycle and oven safety: A competent maintainer checks the specified ventilation, temperature and interlock functions; the supervisor confirms staff follow the safe curing, shutdown and access sequence.
A sprayer reports chest tightness: The manager confirms occupational-health follow-up and review of exposure controls; appropriate health-surveillance and biological-monitoring findings are acted on while personal health information stays confidential.
Make the handover usable
State what may proceed, what remains held, who owns each unresolved issue and the evidence required to change the decision. Ask the next person to explain the restriction in their own words. Record a defined review point and communicate any change to affected colleagues, contractors and visitors. A form is useful only when it represents the actual arrangement.
Fictional applied case
Booth 2 has a posted clearance time, but filters and fan settings were changed yesterday without verification. A sprayer lifts their visor to inspect the finish while another colleague prepares to enter. Booth 3 has an extraction alarm. The supervisor points to an earlier normal monitoring result and asks production to continue.
Turn the selected control into a clear question, observation and review trigger.
Prepare a short toolbox conversation
Choose one relevant task from this course. Describe its current scope, then ask a colleague to identify the people exposed and the control that must work. Avoid asking only whether everyone understands: a useful response explains the action and what would make the job stop.
Control access, train sprayers and maintain booth extraction and breathing-air equipment.
For the fictional exercise below, write the observation, harm pathway, immediate protection, responsible role and evidence needed before release. Use the packaged worksheet; do not enter real personal or company information or submit an operational record.
Check the claim against the workplace
A trained sprayer performs the specified booth and air-fed apparatus checks; the responsible manager verifies suitable breathing-air supply, maintenance and controlled access.
A competent person verifies the booth-specific clearance test remains applicable; the supervisor checks the displayed time and observes staff following entry and exit controls.
A competent person confirms the fault is repaired and extraction and safety controls function correctly; authorised staff verify safe performance before releasing the booth for use.
A competent assessor checks the real mixing task against product information; the supervisor observes containment, ventilation, correct labels and suitable uncontaminated protective equipment.
A competent maintainer checks the specified ventilation, temperature and interlock functions; the supervisor confirms staff follow the safe curing, shutdown and access sequence.
The manager confirms occupational-health follow-up and review of exposure controls; appropriate health-surveillance and biological-monitoring findings are acted on while personal health information stays confidential.
Follow up the change
Arrange a proportionate check after the control is used in representative conditions. If the observation contradicts the claimed protection, retain the restriction, report the discrepancy and revisit the assessment. Keep course completion separate from permission to perform specialist work.
Fictional applied case
Booth 2 has a posted clearance time, but filters and fan settings were changed yesterday without verification. A sprayer lifts their visor to inspect the finish while another colleague prepares to enter. Booth 3 has an extraction alarm. The supervisor points to an earlier normal monitoring result and asks production to continue.
End-of-course revision · Drag each symbol to its hazard name, or use the menu on each card with touch or keyboard. This is practice alongside the separate final assessment.
Acute toxicity
Corrosive
Explosive
Flammable
Gas under pressure
Harmful / irritant
Hazardous to the environment
Oxidising
Serious health hazard
Match all nine symbols, then check your choices.
Need the reference table?Chemical hazard pictograms · examples and checksOptional reference · all nine symbols · does not change assessment requirements
READ THE LABEL · UNDERSTAND THE TASK
Recognise the symbol. Read the full label. Assess the actual task.
Examples illustrate possible uses of a symbol, not the classification of every formulation. A product can carry several pictograms. Check its current label, hazard statements and matching safety data sheet (SDS).
CLP/GHS hazard pictograms: meanings and illustrative examples
Pictogram and hazard
What it can mean
Example and question before work
ExplosiveGHS01
Explosion, blast or projection hazards; also certain self-reactive substances and organic peroxides.
Example: Certain fireworks or reactive chemical products.Ask: Does the authorised task account for impact, heat and the product’s stability limits?
FlammableGHS02
Can ignite; also used for certain self-heating, pyrophoric or water-reactive hazards.
Example: Petrol or some solvent-based products.Ask: What could release vapour or ignite it during this task, including nearby work?
OxidisingGHS03
Can cause or intensify fire; some strong oxidisers present an explosion hazard.
Example: Oxygen or certain oxidising chemicals.Ask: What incompatible materials and contamination must the assessed storage and connection keep apart?
Gas under pressureGHS04
Pressurised gas may burst if heated; refrigerated gas can cause cold burns.
Example: Compressed-gas cylinders.Ask: Have the gas identity, cylinder, connection and pressure or temperature hazards been checked?
CorrosiveGHS05
May damage metals, cause severe skin burns or cause serious eye damage; read the stated hazard.
Example: Certain drain cleaners, acids or alkalis.Ask: Which contact and splash routes must be prevented in this actual handling or dilution task?
Acute toxicityGHS06
Can be toxic or fatal after short exposure through the stated route.
Example: Methanol or certain pesticide products.Ask: Which exposure routes and emergency arrangements does this product’s information identify?
Harmful / irritantGHS07
May indicate harmful acute toxicity, irritation, skin sensitisation, drowsiness or dizziness; also ozone-layer hazards.
Example: Some detergents or cleaning products.Ask: What do the hazard statements say? Do not dismiss this as a harmless or mild product.
Serious health hazardGHS08
Can indicate cancer, genetic or reproductive harm, organ damage, respiratory sensitisation or aspiration hazard.
Example: Petrol or some sensitising chemical products.Ask: Which particular health effect is stated, and how does the task prevent the relevant exposure?
Hazardous to the environmentGHS09
Hazardous to aquatic life, potentially with long-lasting effects.
Example: Certain pesticides, biocides or fuels.Ask: How will the assessed arrangements prevent release to drains, water or soil?
Read beyond the picture · Open a prompt to compare the explanation.
Is the exclamation mark the same as the chest-starburst symbol?
No. The two symbols communicate different groups of hazards. Read the actual hazard statements: skin sensitisation and respiratory sensitisation are not interchangeable, and neither symbol specifies the complete task controls.
Does a bottle with no pictogram prove the task is safe?
No. Work may generate hazardous dust, fume or mist, and exposure depends on the task. Resolve missing or conflicting identification before use. A pictogram is not a compatibility chart or a complete workplace risk assessment.
Which information turns recognition into a useful work decision?
Match the product and SDS revision. Read the hazard statements and relevant SDS sections for handling, storage, exposure control, emergencies and reactivity together. Then check the actual task assessment and controls. A safety data sheet is not itself a COSHH assessment.