Chemical hazards: recognise, understand, apply
SHAREhub environment · Learning reference
Chemical hazard pictograms · examples and checksOptional reference · all nine symbols · does not change assessment requirements
Recognise the symbol. Read the full label. Assess the actual task.
Examples illustrate possible uses of a symbol, not the classification of every formulation. A product can carry several pictograms. Check its current label, hazard statements and matching safety data sheet (SDS).
Download comparison table (PDF · A4 landscape)
| Pictogram and hazard | What it can mean | Example and question before work |
|---|---|---|
ExplosiveGHS01 | Explosion, blast or projection hazards; also certain self-reactive substances and organic peroxides. | Example: Certain fireworks or reactive chemical products.Ask: Does the authorised task account for impact, heat and the product’s stability limits? |
FlammableGHS02 | Can ignite; also used for certain self-heating, pyrophoric or water-reactive hazards. | Example: Petrol or some solvent-based products.Ask: What could release vapour or ignite it during this task, including nearby work? |
OxidisingGHS03 | Can cause or intensify fire; some strong oxidisers present an explosion hazard. | Example: Oxygen or certain oxidising chemicals.Ask: What incompatible materials and contamination must the assessed storage and connection keep apart? |
Gas under pressureGHS04 | Pressurised gas may burst if heated; refrigerated gas can cause cold burns. | Example: Compressed-gas cylinders.Ask: Have the gas identity, cylinder, connection and pressure or temperature hazards been checked? |
CorrosiveGHS05 | May damage metals, cause severe skin burns or cause serious eye damage; read the stated hazard. | Example: Certain drain cleaners, acids or alkalis.Ask: Which contact and splash routes must be prevented in this actual handling or dilution task? |
Acute toxicityGHS06 | Can be toxic or fatal after short exposure through the stated route. | Example: Methanol or certain pesticide products.Ask: Which exposure routes and emergency arrangements does this product’s information identify? |
Harmful / irritantGHS07 | May indicate harmful acute toxicity, irritation, skin sensitisation, drowsiness or dizziness; also ozone-layer hazards. | Example: Some detergents or cleaning products.Ask: What do the hazard statements say? Do not dismiss this as a harmless or mild product. |
Serious health hazardGHS08 | Can indicate cancer, genetic or reproductive harm, organ damage, respiratory sensitisation or aspiration hazard. | Example: Petrol or some sensitising chemical products.Ask: Which particular health effect is stated, and how does the task prevent the relevant exposure? |
Hazardous to the environmentGHS09 | Hazardous to aquatic life, potentially with long-lasting effects. | Example: Certain pesticides, biocides or fuels.Ask: How will the assessed arrangements prevent release to drains, water or soil? |
Read beyond the picture · Open a prompt to compare the explanation.
Is the exclamation mark the same as the chest-starburst symbol?
No. The two symbols communicate different groups of hazards. Read the actual hazard statements: skin sensitisation and respiratory sensitisation are not interchangeable, and neither symbol specifies the complete task controls.
Does a bottle with no pictogram prove the task is safe?
No. Work may generate hazardous dust, fume or mist, and exposure depends on the task. Resolve missing or conflicting identification before use. A pictogram is not a compatibility chart or a complete workplace risk assessment.
Which information turns recognition into a useful work decision?
Match the product and SDS revision. Read the hazard statements and relevant SDS sections for handling, storage, exposure control, emergencies and reactivity together. Then check the actual task assessment and controls. A safety data sheet is not itself a COSHH assessment.
Supply pictograms communicate hazards. They do not replace transport labels, a compatibility assessment, task controls or the site emergency plan. GB CLP applies in Great Britain; EU CLP applies in Northern Ireland. Asbestos, lead and radioactive substances have separate specific regulatory arrangements.
Example SDS · understand its 16 sectionsUse the supplier information to assess the actual use and application
From a safety data sheet to a COSHH assessment
An SDS is information for the assessment. It is not the assessment.
Fisher Scientific UK · BP2618 range · CAS 67-63-0
Revision 19 · 13 October 2023
This learning example refers to the identified supplier edition. It is not a replacement SDS or confirmation that this is the latest sheet for a product you hold. Obtain the current matching supplier SDS before real use.
Open the original supplier SDS (PDF) ↗Below is SHARE’s learning annotation, not a rebranded supplier document or a complete safety data sheet.
- Identity
- Propan-2-ol / isopropanol; the referenced sheet identifies a laboratory-grade product.
- Section 2 signals
- Danger; flame and exclamation-mark pictograms. H225, H319 and H336 identify flammability, eye irritation and possible drowsiness/dizziness.
- Section 3 composition
- The referenced sheet lists isopropyl alcohol above 95% by weight.
- Section 8 decision
- Engineering measures and several glove-material options appear. Check the complete conditions; no single glove or respirator is selected by this lesson.
- Section 9 example
- A 12°C closed-cup flash point is listed. This is product data, not a workplace exposure reading or an automatic safe-temperature limit.
Explore every section
1. Identification
Match the product, supplier, intended use and emergency contact to the actual container. A familiar chemical name alone may not identify a formulation.
2. Hazards identification
Read classification, pictograms, signal word and hazard/precautionary statements together. Identify the routes and outcomes the task must prevent.
3. Composition / ingredients
Check concentration and relevant ingredients. A diluted mixture, hardener or changed formulation may need different information and assessment.
4. First-aid measures
Prepare product-specific first-aid arrangements and ready access to the full sheet. Do not replace the workplace emergency procedure with a memory exercise.
5. Firefighting measures
Provide the relevant information to the site fire-planning route. An SDS does not authorise an untrained worker to fight a chemical fire.
6. Accidental release
Plan who raises the alarm, isolates the area and deals with a spill within their training. Confirm available equipment and the boundary for specialist help.
7. Handling and storage
Translate the supplier conditions into the actual transfer, storage, access and housekeeping method. Consider other work and incompatible neighbours.
8. Exposure controls / PPE
Read exposure limits, engineering controls and residual PPE together. Check jurisdiction, units and averaging period. Verify control performance and exact glove/RPE suitability.
9. Physical / chemical properties
Consider volatility, flash point, state and other relevant properties at the actual temperature and method. Odour is not a reliable exposure measurement.
10. Stability / reactivity
Identify incompatible materials, conditions to avoid and possible decomposition. Check the whole process and waste stream, not just separate containers.
11. Toxicological information
Connect the health effects to possible inhalation, skin, eye and ingestion exposure. Use competent advice where specialist interpretation is needed.
12. Ecological information
Plan to prevent environmental release, including drains and water. Lack of a fish/tree symbol does not grant permission to discharge.
13. Disposal considerations
Specify the responsible waste route for the product, contaminated materials and containers. Do not assume evaporation or dilution is an acceptable disposal method.
14. Transport information
Check transport classification through the relevant competent route. Supply pictograms and transport labels have different functions.
15. Regulatory information
Identify relevant restrictions and market scope, then check workplace duties separately. A regulatory entry is not a completed COSHH assessment.
16. Other information
Check revision history, abbreviations and supporting statements. Trace material changes into the assessment, instructions, storage and briefing.
Worked COSHH application · fictional laboratory proposal
- Define the proposed use
Fictional laboratory task: wipe small parts for 10 minutes twice per shift, using a proposed 50mL working quantity at ambient temperature. Record the exact product, method, location, people and frequency. These are exercise assumptions, not authorised operating limits.
- Find the exposure and application differences
Compare a controlled dispensing/wiping proposal with spraying the same liquid over an open surface near other work. Spray, surface area, ventilation, duration, splashes and nearby people change the assessment even though the SDS is unchanged. Confirm the proposed use is suitable.
- Work through the control hierarchy
First ask whether the task can avoid the chemical or use a verified safer method. If it remains necessary, assess release prevention, suitable dispensing, enclosure or ventilation before residual PPE. Do not invent a dilution or declare a small quantity safe.
- Specify and verify the real controls
Use sections 7–10 together with competent task assessment. Identify ventilation performance, compatible equipment and the exact glove selection/breakthrough evidence for the job. Consider fire and explosion controls alongside health exposure. Do not copy a generic PPE line and call the work controlled.
- Plan the whole job
Include setup, transfer, use, cleaning, storage, waste, maintenance and foreseeable upset. Identify who is exposed, who owns each action, training, first aid, spill arrangements and the separate emergency response boundary.
- Record, brief and review
Record significant findings, remaining actions and evidence needed before release. Check controls in use. Reassess for changed product, concentration, quantity, temperature, spraying, location, equipment, symptoms, incidents or new supplier information.
Worked decision: HOLD the proposed task until the matching product/use information, exposure and ignition assessment, control verification and emergency arrangements are resolved by the responsible competent people. This learning example does not issue an operational assessment or authorise work.
Match the nine hazard symbols
End-of-course revision · Drag each symbol to its hazard name, or use the menu on each card with touch or keyboard. This is practice alongside the separate final assessment.









Acute toxicity
Corrosive
Explosive
Flammable
Gas under pressure
Harmful / irritant
Hazardous to the environment
Oxidising
Serious health hazard
Match all nine symbols, then check your choices.
Need the reference table?
Chemical hazard pictograms · examples and checksOptional reference · all nine symbols · does not change assessment requirements
Recognise the symbol. Read the full label. Assess the actual task.
Examples illustrate possible uses of a symbol, not the classification of every formulation. A product can carry several pictograms. Check its current label, hazard statements and matching safety data sheet (SDS).
Download comparison table (PDF · A4 landscape)
| Pictogram and hazard | What it can mean | Example and question before work |
|---|---|---|
ExplosiveGHS01 | Explosion, blast or projection hazards; also certain self-reactive substances and organic peroxides. | Example: Certain fireworks or reactive chemical products.Ask: Does the authorised task account for impact, heat and the product’s stability limits? |
FlammableGHS02 | Can ignite; also used for certain self-heating, pyrophoric or water-reactive hazards. | Example: Petrol or some solvent-based products.Ask: What could release vapour or ignite it during this task, including nearby work? |
OxidisingGHS03 | Can cause or intensify fire; some strong oxidisers present an explosion hazard. | Example: Oxygen or certain oxidising chemicals.Ask: What incompatible materials and contamination must the assessed storage and connection keep apart? |
Gas under pressureGHS04 | Pressurised gas may burst if heated; refrigerated gas can cause cold burns. | Example: Compressed-gas cylinders.Ask: Have the gas identity, cylinder, connection and pressure or temperature hazards been checked? |
CorrosiveGHS05 | May damage metals, cause severe skin burns or cause serious eye damage; read the stated hazard. | Example: Certain drain cleaners, acids or alkalis.Ask: Which contact and splash routes must be prevented in this actual handling or dilution task? |
Acute toxicityGHS06 | Can be toxic or fatal after short exposure through the stated route. | Example: Methanol or certain pesticide products.Ask: Which exposure routes and emergency arrangements does this product’s information identify? |
Harmful / irritantGHS07 | May indicate harmful acute toxicity, irritation, skin sensitisation, drowsiness or dizziness; also ozone-layer hazards. | Example: Some detergents or cleaning products.Ask: What do the hazard statements say? Do not dismiss this as a harmless or mild product. |
Serious health hazardGHS08 | Can indicate cancer, genetic or reproductive harm, organ damage, respiratory sensitisation or aspiration hazard. | Example: Petrol or some sensitising chemical products.Ask: Which particular health effect is stated, and how does the task prevent the relevant exposure? |
Hazardous to the environmentGHS09 | Hazardous to aquatic life, potentially with long-lasting effects. | Example: Certain pesticides, biocides or fuels.Ask: How will the assessed arrangements prevent release to drains, water or soil? |
Read beyond the picture · Open a prompt to compare the explanation.
Is the exclamation mark the same as the chest-starburst symbol?
No. The two symbols communicate different groups of hazards. Read the actual hazard statements: skin sensitisation and respiratory sensitisation are not interchangeable, and neither symbol specifies the complete task controls.
Does a bottle with no pictogram prove the task is safe?
No. Work may generate hazardous dust, fume or mist, and exposure depends on the task. Resolve missing or conflicting identification before use. A pictogram is not a compatibility chart or a complete workplace risk assessment.
Which information turns recognition into a useful work decision?
Match the product and SDS revision. Read the hazard statements and relevant SDS sections for handling, storage, exposure control, emergencies and reactivity together. Then check the actual task assessment and controls. A safety data sheet is not itself a COSHH assessment.
Supply pictograms communicate hazards. They do not replace transport labels, a compatibility assessment, task controls or the site emergency plan. GB CLP applies in Great Britain; EU CLP applies in Northern Ireland. Asbestos, lead and radioactive substances have separate specific regulatory arrangements.
Print or save this page using your browser. Open the explanation prompts before printing if you want to include them.