Optional presentation practice. Choices and model launches do not write LMS grades, completion or certificates.
Connect equipment condition, maintenance choices and reliable proof to the containment and protective functions that people depend on.
Mechanical integrity concerns whether equipment can continue performing its intended duty. Asset integrity also involves the people, information and decisions that keep that duty credible through the plant life. A current certificate for one vessel cannot establish the condition of connected pipework, its supports or the emergency isolation function.
The tank exterior looks tidy. The case file records local floor loss and an overdue engineering disposition, which the next receipt planner has not seen.
Time-based preventive work can address a known age-related mechanism. Condition monitoring uses reliable observations to detect deterioration before an unacceptable state. Corrective maintenance follows a fault; it needs a justified basis where failure has safety consequences. These approaches can coexist on one asset.
Inspecting physical condition and testing a protective function address related but different failure modes.
The valve travels on a local command; the automatic demand path was excluded from the test.
Describe what was tested and what was not. Local movement cannot prove the omitted sensing and logic path.
A proof test challenges a defined safety function against its requirements. Depending on the design, the path can involve sensing, logic, power or utility supply and a final element. Servicing an actuator alone does not establish that the complete function reaches its required safe state.
Containment can fail at floors, welds, nozzles or foundations that a general walk-round cannot assess; a small leak can contaminate ground or escalate.
Escalate the unresolved integrity finding and apply the competent operating restriction or safe removal from service before further receipt is authorised.
Changing composition, duty, temperature pattern or operating sequence may alter corrosion, seals, loading or inspection needs. A replacement that fits dimensionally can still differ in material or protective performance. The change process must examine the relevant system rather than only the purchased part.
A completed repair order records work; operational hand-back needs evidence that the required condition and functions have been restored. Reconcile defects, inspection or test results, temporary configurations, permits, isolations and operating information through the site process. Some unresolved findings may prevent return.
Return to the same fictional model case. Select the evidence needed before relying on the control.
Trace the specific finding to an approved assessment, repair or justified restriction and suitable follow-up evidence; confirm the operating team knows the resulting limits.
A power failure, steam-main rupture and refinery fire prompted a joint investigation. Its lessons included maintenance, contractor interfaces and management of change.
Apply the learning from Grangemouth, May to June 2000 to the current task.
Compare current condition and function-specific test evidence with the required duty.
Use the full course for detailed teaching, required activities and the separate final assessment. Presentation choices are practice and do not write LMS grades or completion.
The PowerPoint contains the presentation and notes. Enable JavaScript for the online choices and classification activity.