Recycling centre safety / Recycling machinery, isolation and safe intervention
Recycling centre safety · SH-REC-03Recycling machinery, isolation and safe intervention

Free online training · Approximate learning time: 110–180 minutes · Self-paced
Keep people outside dangerous movement through blockage, maintenance and handback.
Full public teaching and readers are free without an account. A free learner account is required for saved LMS progress and recorded assessment. Completion and any course-completion certificate depend on the configured LMS conditions.
Who this course is for
Sorting, baling, compactor, cleaning, engineering and supervisory teams.
Examine conveyor nips, local stops, defeated baler access, stored hydraulic energy, doubtful bale restraint and compactor openings. Learn what evidence must exist before intervention and return to use.
Waste-machinery awareness using actual WASTE scenes. Apply GB work-equipment guidance or the separate NI route. No live isolation, hydraulic troubleshooting, chamber entry, safeguarding design or technical repair authority is granted.
Learning outcomes
- Explain why normal running and command stops do not establish safe access.
- Identify all relevant sources and work-party boundaries.
- Recognise hydraulic injection and urgent escalation needs.
- Define competent safeguarding, discharge and handback evidence.
Course outline
Recognise access and drawing-in hazards
- A familiar belt can hide a drawing-in pointIdentify the conveyor mechanism and stop use when the access protection is defective.
- A control-button stop is not a blockage-clearing boundaryExplain the task-specific isolation and safe-access evidence needed for conveyor intervention.
Establish a safe intervention boundary
- A defeated baler interlock is an unavailable safeguardRespond to access-control defeat and specify meaningful competent restoration.
- Hydraulic pressure can survive the electrical isolationRecognise stored pressure, supported movement and injection hazards without live troubleshooting.
Restore baler safeguards and stored-energy control
- A damaged bale restraint can release energy at dischargeKeep people clear while a doubtful bale and its discharge method are assessed.
- The compactor opening is both a fall and crushing hazardCoordinate edge/access protection with machine isolation and positive handback.
- Exposed conveyor nip pointEmergency stopping responds after a problem; it does not prevent contact with the dangerous nip.
- Unexpected restart during blockage clearingA control stop cannot establish safe isolation; movement must remain prevented for the whole intervention.
- Baler chamber access with defeated interlockSupervision does not restore a defeated safety function; the machine needs effective repair and a defensible handback.
Control discharge and compactor access
- Stored hydraulic energy during maintenanceElectrical isolation alone does not remove hydraulic or gravitational energy; improvised leak testing can cause injection injury.
- Bale restraint failure at dischargeHand restraint exposes a person to stored energy and a heavy load; the equipment method must control the release.
- Fall into a compactor feed openingTape and cycle timing do not protect against a fall or unexpected machinery movement.
Coordinate verified handback
- The line stopped, but several danger states remainIntegrate guards, residual energy, blocked material and work-party handback.
- Take a verified action into the workplaceConnect one actual task to an owner, evidence and a clear release or escalation decision.
Activities, model practice and assessment
Work through 5 required applied activities and 3 model-practice pauses, with explanatory feedback and independent lesson decisions. Complete 6 distinct model mission sequences across those pauses. Use the actual fictional recycling centre model or its equivalent accessible route to complete the required decision sequences; launching the model alone does not complete practice.
The 20-question assessment requires at least 80% plus every designated critical safety answer. Complete the required activities, practice and lesson checks. Points and badges cannot offset a critical safety error.
Use the LMS for confirmed save/resume and recorded results. Any certificate follows its configured passed-completion and grade conditions.
Open the public interactive practice copy; public practice is separate from the LMS record.
Sources and learning provenance
Original fictional cases are paired with public SHAREhub teaching and structured topic records. Use the applicable jurisdiction and primary guidance for live work.
- HSE: machinery safety in waste and recycling
- HSE: maintenance of work equipment
- HSE: hydraulic injection injury safety alert
- HSE: bales and bale handling
Topic sections, source identities and versions
| Public topic | Chunk and version | Jurisdiction and sources |
|---|---|---|
| machinery-hazards · mechanisms | machinery-hazards--mechanisms 2.0 | Great Britain, Northern Ireland hse-intro, hse-l22 |
| guards-and-machinery-interlocks · guard-choice | guards-and-machinery-interlocks--guard-choice 2.4 | Great Britain, Northern Ireland src-guards-l22, src-guards-hse-intro |
| isolation-lockout-and-line-breaking · energy-sources | isolation-lockout-and-line-breaking--energy-sources | Great Britain, Northern Ireland isol-legacy-01, isol-legacy-02 |
| isolation-lockout-and-line-breaking · verification | isolation-lockout-and-line-breaking--verification | Great Britain, Northern Ireland isol-legacy-01, isol-legacy-02 |
| guards-and-machinery-interlocks · interlock | guards-and-machinery-interlocks--interlock 2.4 | Great Britain, Northern Ireland src-guards-l22, src-guards-hse-intro |
| maintenance-inspection-and-testing-of-work-equipment-and-machinery · functional-testing | maintenance-inspection-and-testing-of-work-equipment-and-machinery--functional-testing 2.0 | Great Britain, Northern Ireland hse-l22, hse-maint |
| isolation-lockout-and-line-breaking · planning | isolation-lockout-and-line-breaking--planning | Great Britain, Northern Ireland isol-legacy-01, isol-legacy-02 |
| machinery-hazards · harm-outcomes | machinery-hazards--harm-outcomes 2.0 | Great Britain, Northern Ireland hse-intro, hse-mobile, hse-wood-dust, hse-noise |
| manual-handling · decision-tool | manual-handling--decision-tool 2.0 | Great Britain, Northern Ireland hse-manual, hseni-manual |
| working-at-height · hierarchy | working-at-height--hierarchy 4.0 | Great Britain, Northern Ireland source-gb_law, source-ni_law, source-hse_intro, source-hse_assess |
| guards-and-machinery-interlocks · intervention | guards-and-machinery-interlocks--intervention 2.4 | Great Britain, Northern Ireland src-guards-hse-maint, src-guards-hse-quarry, src-guards-l22, src-guards-hse-interlock |
| isolation-lockout-and-line-breaking · handover | isolation-lockout-and-line-breaking--handover | Great Britain, Northern Ireland isol-legacy-01, isol-legacy-02 |
| guards-and-machinery-interlocks · assurance | guards-and-machinery-interlocks--assurance 2.4 | Great Britain, Northern Ireland src-guards-l22 |
Course SH-REC-03 · version 2026.10.20.1. .
Questions about this course
Is this training free?
Full public teaching and readers are free without an account. A free learner account is required for saved LMS progress and recorded assessment. Completion and any course-completion certificate depend on the configured LMS conditions.
How long should I allow?
Approximately 110–180 minutes, including teaching, lesson checks, required activities, model or accessible practice and one assessment attempt. Individual pace, review and retries vary. Save and resume in the LMS.
Can I learn without a 3D-capable browser?
Yes. The complete HTML reader provides the teaching. Required model practice has an equivalent accessible decision route in the interactive course. Use the LMS route for recorded learning.
What is required to pass?
Complete the required learning, activities, practice and lesson decisions. The 20-question final assessment requires at least 80% plus every designated critical safety answer. Points cannot compensate for a critical safety error. Follow the feedback before retrying.
Does this authorise recycling operations?
Waste-machinery awareness using actual WASTE scenes. Apply GB work-equipment guidance or the separate NI route. No live isolation, hydraulic troubleshooting, chamber entry, safeguarding design or technical repair authority is granted. This independent course does not award an external qualification or replace competent task assessment, practical training or site authorisation.
Which manual handling assessments will you learn to use?
TILEO helps you review the wider task; MAC supports appropriate lifting, carrying and team handling of inanimate loads; RAPP supports appropriate pushing and pulling.
These aids support the activity assessment. Repetitive upper-limb work may need ART; variable or complex tasks may need other HSE tools or a fuller competent assessment. Mechanical lifting, stored energy, equipment safety and health decisions retain their separate controls. A low factor score, a downloaded report or completion of this course does not approve the work.
This additional teaching takes about 2–5 minutes, in addition to the course estimate. Optional reading and workplace assessment take additional time.
Learn how to select the method, use separate reports for mixed tasks, add a company logo and keep editable Word or PDF records. After a saved pass, the course offers a direct route to the assessment tools. Workplace assessment and practical competence remain separate from course completion.