Workplace practice sheets
Use the fictional evidence in your own notes. The exercises do not create or approve operational records.
Height-work readiness exercise
For the facilities case, record avoidance options, fall and object paths, surface evidence, selected protection, people below, rescue readiness and the conditions that hold or release work.
- Fictional exercise: A facilities team plans overhead maintenance beside an opening and a busy route. The available equipment is familiar, but surface information and the rescue arrangement are incomplete.
- For the facilities case, record avoidance options, fall and object paths, surface evidence, selected protection, people below, rescue readiness and the conditions that hold or release work.
- Make three columns: observed facts, missing evidence and the responsible action. State the condition that prevents starting or requires stopping, and the verification needed before release. Do not invent results or approvals.
Open the live SHAREhub resource ↗
Optional extension. Live SHAREhub tools may need a separate sign-in. The included exercise works offline and submits no workplace record.
Optional visual practice: revisit the reasoning
These supplementary examples reuse SHAREhub Knowledge teaching. They are unmarked and do not alter your course requirements. Use the same statements and branches on paper, then compare the explanations.
Identify the complete fall path
Follow the person, surface, edge or opening and people below rather than relying on a height label.
A fall path can be hidden
An opening or fragile rooflight can expose someone to a fall even away from an obvious roof edge. Unknown surface strength needs competent evidence.
Access is part of the task
The route to the work, the working position and leaving the area each need protection.
People below are exposed too
Tools and materials can fall into routes used by others. Include the drop zone and changing work interfaces in the plan.
Match the harm pathway
Fictional example: A planner reviews a maintenance task at height.
Use the fictional descriptions, not a judgment that the depicted roof is safe.
- A person could step through an unverified rooflight. Person falling: A fragile surface can create a fall path away from the visible edge.
- A loose tool could enter a pedestrian route below. Object falling: The work can harm people who never climb.
- The route to the working position is not identified. Access or condition gap: Safe access and egress must be included in planning.
- Rain has changed the surface condition since the plan was checked. Access or condition gap: A changed condition needs a fresh task decision, not reliance on the earlier check.
Choose avoid, prevent, then minimise
Compare the three control functions and the evidence each needs.
Avoid exposure
Consider a suitable ground-level or remote method before committing people to the height.
Prevent a fall
If height work remains, consider a safe existing place and suitable collective protection or equipment for the actual task.
Minimise remaining consequences
Fall mitigation comes after prevention. Personal arrest needs the specified system design, clearance, compatibility and rescue; it does not make a fragile surface sound.
Choose the hierarchy questions
Fictional example: An external feature needs inspection, with no method chosen yet.
Which questions help compare the fictional inspection methods?
- Could a suitable ground-level or remote method obtain the required information? Avoiding the exposure is the first control question.
- If height remains, what prevents the fall and protects everyone exposed? Prevention and collective protection need consideration before reliance on mitigation.
- Can a harness be used as proof that the roof is strong? Personal protection does not establish surface strength.
- Does owning a ladder settle the access method? The method must fit the task, place and assessed conditions.
Settle task, access and competence before starting
Use the access comparison as a planning prompt, then follow a changed-task decision.
Task drives the choice
Reach, force, materials, duration and posture affect access suitability. Equipment availability alone does not settle it.
Verify the workface
Ground/support, access, equipment condition, competent people and the current plan need to match the task.
Change needs review
A longer, heavier or more awkward extension can defeat the basis of the original method. Resolve the changed question before extending the work.
Review a longer task
Fictional example: A short inspection is changed into a sustained two-handed repair.
Follow the planning route when the job expands.
- Does the current method assessment cover the repair as now described?
- No, or suitability for the new demands is uncertain.: Hold the extension and obtain a task-matched method decision. Next: Learning outcome to consider — Obtain the particular competent planning information and keep the affected work restricted.
- Yes; the revised task and equipment requirements are expressly covered.: Check the current workface and people against those requirements. Next: Are current access, equipment, people and emergency arrangements verified?
- Are current access, equipment, people and emergency arrangements verified?
- Yes, within the responsible workplace process.: Communicate the applicable limits and change triggers. Next: Learning outcome to consider — Use the responsible task decision and agreed controls. The course does not approve a real access method or equipment configuration.
- A ground, equipment, competence or rescue question is unresolved.: Do not let familiarity with the original job answer an unresolved new question. Next: Learning outcome to consider — Obtain the particular competent planning information and keep the affected work restricted.
- Learning outcome to consider
Obtain the particular competent planning information and keep the affected work restricted.
- Learning outcome to consider
Use the responsible task decision and agreed controls. The course does not approve a real access method or equipment configuration.
Do not infer surface strength from appearance
Distinguish personal-system geometry from evidence of roof strength.
Appearance is not strength
Rooflights, suspect sheeting and deterioration need appropriate competent evidence. Do not test a surface by stepping on it.
Avoid uncertain access
Consider a suitable protected method from below or other access equipment where it can do the task without the uncertain roof exposure.
Personal systems have a defined purpose
Properly designed restraint prevents reaching a fall position. It cannot strengthen a rooflight, validate an anchor or replace the specialist plan.
Match the claim to its evidence limit
Fictional example: The fictional roof includes a rooflight and proposed personal restraint.
Separate a useful planning fact from an unsupported release claim.
- Can the actual restraint geometry prevent reaching every relevant fall position? Useful task/system question: This is a defined system-design question for the competent process.
- What current competent evidence describes the surface and access route? Useful task/system question: The specific location and condition need reliable evidence.
- The rooflight looks sound, so a person may step on it. Unsupported conclusion: Appearance does not establish load-bearing strength.
- A harness is available, so the uncertain roof route is acceptable. Unsupported conclusion: Availability cannot resolve surface, anchor, geometry and rescue requirements.
Protect others and respond to changed conditions
Connect the illustrated roof interfaces with the protection of people below and changed conditions.
Contain the falling-object route
Suitable securing or containment and effective separation below address the route from tools and materials to other people.
Maintain the boundary
Coordinate other trades, pedestrians and vehicles so protection remains effective throughout the job. A sign alone may leave access open.
Use actual limits
Weather, visibility and surface changes can affect stability and access. Follow the equipment/task limits from the plan rather than invent a universal wind threshold.
Recognise a changed work boundary
Fictional example: People begin walking beneath a planned height task, and the weather worsens.
Which responses fit the fictional change?
- Stop the affected work and restore the assessed separation before relying on it. The boundary must remain effective during the task.
- Review changed conditions against the task/equipment limits through the responsible role. The decision must use current conditions and specified limits.
- Continue because the permit was signed before the change. Earlier paperwork does not protect a changed workface.
- Rely on helmets as the only response to uncontrolled falling objects. A helmet does not stop an object falling or separate the people below.
Plan recovery and verify return
Follow the readiness question through rescue and current controls, without practising a physical rescue.
Plan recovery before exposure
Rescue must fit the location, equipment and credible emergency with competent people, communication and resources.
Do not improvise another casualty
Untrained colleagues must not enter unsafe areas or climb without the planned capability. Calling emergency services must not be the only planned provision.
Verify the complete arrangement
After a defect or change, the responsible competent process checks restored controls, people and recovery arrangements. A repaired item or new tag does not settle all of these questions.
Check recovery readiness
Fictional example: The fictional task relies on a method with a planned rescue arrangement.
Follow the pre-start readiness question.
- Are the required competent response people, communication and resources available now?
- No, or availability cannot be confirmed.: Hold the affected work and resolve the recovery gap before exposure. Next: Learning outcome to consider — Resolve the missing recovery/control evidence through the responsible role; do not improvise a rescue or start to test the plan.
- Yes; the plan fits the actual place and equipment.: Verify the rest of the current protection and work conditions as well. Next: Following a defect or change, has the responsible process confirmed the complete arrangement?
- Following a defect or change, has the responsible process confirmed the complete arrangement?
- Yes; the relevant controls, inspection and recovery basis are verified.: Keep restrictions, communication and triggers for stopping clear. Next: Learning outcome to consider — Use the responsible workplace release and retain the planned capability. This awareness exercise does not confer rescue competence or work authorisation.
- Only a repaired item or renewed inspection tag is recorded.: That item alone does not establish the whole work and rescue arrangement. Next: Learning outcome to consider — Resolve the missing recovery/control evidence through the responsible role; do not improvise a rescue or start to test the plan.
- Learning outcome to consider
Resolve the missing recovery/control evidence through the responsible role; do not improvise a rescue or start to test the plan.
- Learning outcome to consider
Use the responsible workplace release and retain the planned capability. This awareness exercise does not confer rescue competence or work authorisation.
Optional choices in the player are saved on this browser. They are separate from formal assessment results and records.