APPLY THE LEARNING

Workplace practice sheets

Use the fictional evidence in your own notes. The exercises do not create or approve operational records.

Safeguard evidence review

For the packaging case, identify access routes, the specified protective function, normal stop versus intervention isolation, bypass warnings and the evidence needed for competent handback.

  1. Fictional exercise: A packaging conveyor stops when its gate opens, but dangerous motion remains reachable and operators have started resetting nuisance trips. Cleaning and restart arrangements need review.
  2. For the packaging case, identify access routes, the specified protective function, normal stop versus intervention isolation, bypass warnings and the evidence needed for competent handback.
  3. Make three columns: observed facts, missing evidence and the responsible action. State the condition that prevents starting or requires stopping, and the verification needed before release. Do not invent results or approvals.

Open the live SHAREhub resource ↗

Optional extension. Live SHAREhub tools may need a separate sign-in. The included exercise works offline and submits no workplace record.

Optional visual practice and worked application

Use these fictional exercises to compare evidence and rehearse decisions. They do not alter course completion or assessment requirements. You can work through the same choices on paper.

Treat safeguarding as a connected function

Fictional continuing case. The manager sees a solid gate and a functioning switch light and proposes release. No whole-machine stopping or restart acceptance has been recorded.

Component result has limits

A bench result establishes what was tested on that component. It does not show adequate stopping behaviour, safe access or restart prevention for the whole machine.

Every access pathway matters

Reach around a loose panel or a tool introduced through an opening can create a harm route despite another secure guard. Consider the actual task and people, not just whether a panel is present.

Worked function record

Separate: access boundary, detection/control response, stopping behaviour and restart conditions. Identify each missing competent verification. This awareness record is not a specification for designing a safety control.

Match each observation to the safety question

Fictional worked application: At a fictional packing machine, a replacement gate switch lights correctly on the bench. The machine brake is degraded, access from a loose side panel is possible and closing the gate unexpectedly restarts motion. The repair entry is signed while a second worker is still inside the enclosure. Stage evidence: The manager sees a solid gate and a functioning switch light and proposes release. No whole-machine stopping or restart acceptance has been recorded.

Match each observation to the safety question. Use the evidence in this stage, rather than assuming what happened off screen.

  • A person can reach around the loose side panel. Access prevention. A present gate does not cover a different unprotected route.
  • The switch responds but the brake is degraded. Stopping behaviour. Detection alone does not establish adequate whole-machine stopping protection.
  • Gate closure restarts movement while occupancy is unresolved. Restart/personnel control. Restart and the safe accepted condition require competent review.

Open this interactive lesson

Trace access, harm and safeguarding in the task assessment

Draw separate chains for access-to-motion protection and maintenance energy control. Mark the known component result, missing whole-function evidence, remaining person and authorised release decision without giving operational bypass instructions.

Draw separate chains for access-to-motion protection and maintenance energy control. Mark the known component result, missing whole-function evidence, remaining person and authorised release decision without giving operational bypass instructions.

Use only a fictional or authorised non-confidential example. Keep planned actions separate from verified current protection.

A saved practice entry does not alter the graded course or authorise work.

Reduce the need to enter rather than accept defeat

Fictional continuing case. A suitable feed redesign could prevent the recurring jam. Instead, a supervisor offers a spare actuator to reduce nuisance-trip delays.

Stronger task design

Avoiding or reducing the dangerous intervention can remove an exposure opportunity. Review the feed change and any new hazards rather than making defeat convenient.

Faults require resolution

Investigate recurring trips, defects and work pressures without bypassing protection. No past injury is not evidence that the present access route is protected.

Isolation remains separate

An emergency stop or open interlocked gate is not automatically maintenance isolation. Relevant energy and stored hazards may remain available; use the suitable competent intervention arrangements.

Choose the defensible fault and intervention response

Fictional worked application: At a fictional packing machine, a replacement gate switch lights correctly on the bench. The machine brake is degraded, access from a loose side panel is possible and closing the gate unexpectedly restarts motion. The repair entry is signed while a second worker is still inside the enclosure. Stage evidence: A suitable feed redesign could prevent the recurring jam. Instead, a supervisor offers a spare actuator to reduce nuisance-trip delays.

Choose the defensible fault and intervention response. Select every defensible evidence or action; leave unsupported substitutes unselected.

  • Review the recurring jam and suitable feed redesign to reduce dangerous entry. Relevant evidence. This addresses the intervention need rather than normalising a bypass.
  • Examine the complete protective function and separate energy/isolation requirements. Relevant evidence. A component light or stop button does not answer every hazard.
  • Supply an actuator so operators can keep running with the access protection defeated. Insufficient evidence. Convenient defeat leaves the harm route open.
  • Use the injury-free history to dismiss the loose-panel access route. Insufficient evidence. The current unprotected pathway is the relevant condition.

Open this interactive lesson

Trace access, harm and safeguarding in the task assessment

Draw separate chains for access-to-motion protection and maintenance energy control. Mark the known component result, missing whole-function evidence, remaining person and authorised release decision without giving operational bypass instructions.

Draw separate chains for access-to-motion protection and maintenance energy control. Mark the known component result, missing whole-function evidence, remaining person and authorised release decision without giving operational bypass instructions.

Use only a fictional or authorised non-confidential example. Keep planned actions separate from verified current protection.

A saved practice entry does not alter the graded course or authorise work.

Accept the final safe state with everyone accounted for

Fictional continuing case. The engineer’s repair is complete. Another worker remains within the enclosure, and the restart arrangement has not been accepted.

Hand-back includes people

Account for all affected people, tools and the safe accepted condition before restart. Completing the repair cannot cancel occupancy or other outstanding conditions.

Judge designed behaviour

An open gate during intended protected access is not automatically a defect; judge whether the protective function is effective for that access. It is also not automatic proof of isolation.

Record scoped verification

Retain the component repair evidence, whole-function checks and final release decision separately. Do not replace missing restart evidence with a stronger warning.

Follow the gate repair to a controlled restart decision

Fictional worked application: At a fictional packing machine, a replacement gate switch lights correctly on the bench. The machine brake is degraded, access from a loose side panel is possible and closing the gate unexpectedly restarts motion. The repair entry is signed while a second worker is still inside the enclosure. Stage evidence: The engineer’s repair is complete. Another worker remains within the enclosure, and the restart arrangement has not been accepted.

Are people, tools and the accepted enclosure state accounted for?

  • Are people, tools and the accepted enclosure state accounted for?
    • No / not established in this case: The second worker remains within the enclosure despite repair completion. Next: Current decision — Keep restart unresolved and complete the personnel/state checks.
    • Yes, supported by the stated evidence: Proceed to the separate verification question; the first condition alone is not the final decision. Next: Has the required whole-machine stopping and restart protection been competently verified?
  • Current decision

    Keep restart unresolved and complete the personnel/state checks.

  • Has the required whole-machine stopping and restart protection been competently verified?
    • The relevant evidence is still missing: Retain the protective-function restriction until the required evidence is accepted. Next: Verification still required — Retain the protective-function restriction until the required evidence is accepted.
    • Yes, the responsible check is evidenced within its scope: Record responsible acceptance within the verified task scope. Next: Scoped decision supported — Record responsible acceptance within the verified task scope.
  • Verification still required

    Retain the protective-function restriction until the required evidence is accepted.

  • Scoped decision supported

    Record responsible acceptance within the verified task scope.

Open this interactive lesson

Trace access, harm and safeguarding in the task assessment

Draw separate chains for access-to-motion protection and maintenance energy control. Mark the known component result, missing whole-function evidence, remaining person and authorised release decision without giving operational bypass instructions.

Draw separate chains for access-to-motion protection and maintenance energy control. Mark the known component result, missing whole-function evidence, remaining person and authorised release decision without giving operational bypass instructions.

Use only a fictional or authorised non-confidential example. Keep planned actions separate from verified current protection.

A saved practice entry does not alter the graded course or authorise work.

Optional choices save on this browser, separately from recorded course progress. Live tools retain their own access and competent-review requirements.