SHAREhub home

Plant acceptance, use, maintenance and isolation procedure

BOUK-PRO-PLANT · v1.0 · Completed fictional example · DOCX

Check equipment before use, maintain protective devices and quarantine unsafe plant.

Download editable DOCXView this policy branch

Read-only preview. Use the downloaded native file for your own working copy. Examples are fictional; signatures, work releases and operational evidence remain separate.

BOUK-PRO-PLANT | Version 1.0 | 23 October 2026 | GB baseline

COMPLETED FICTIONAL EXAMPLE. BuildOut UK Ltd is an illustrative construction business. The arrangements and cases below are examples for adaptation; no actual work, approval or signature is represented.

Check equipment before use, maintain protective devices and quarantine unsafe plant.

Scope and operating responsibility

We apply this procedure to Excavator, nail gun, saw and dust extraction unit. Evidence includes Plant register; selection and receipt checks; inspections and examinations as applicable; defect quarantine; repair and safe hand-back. The role controlling the task checks applicability before mobilisation and whenever the scope changes.

RoleRequired action
Site managerOwn this arrangement, confirm competent support and maintain its evidence trail.
Project manager and Site managerCoordinate the actual package, provide resources and verify prerequisites before release; resolve occupied and subcontractor interfaces.
Trade supervisor and workersUse the accepted current method, demonstrate understanding, report changes and stop when critical safeguards are uncertain.
Competent specialist and H&S adviserProvide technical advice within competence; challenge evidence and identify limitations. Management retains the operating decision.

Inputs before using the procedure

Use the current project risk register, relevant survey and design revisions, equipment or product information, worker consultation and the task-specific records listed below. Resolve conflicting or missing information before relying on it. Do not fill missing technical values from an example.

How we carry out the arrangement

1 Plan and obtain reliable information

The Procurement / commercial lead selects excavators, saws, nail guns, extraction and other equipment for the actual task, attachments, services and operating environment.

2 Verify capability and prerequisites

Receipt and pre-use checks verify guards, safety devices, compatible accessories, instructions, inspection requirements, maintenance and operator restrictions. A hire label does not replace these checks.

3 Control work and interfaces

Cleaning, blockage removal, maintenance and adjustment use competent isolation and safe access; guards and interlocks are not bypassed to maintain production.

4 Review change and safe handback

Defects are tagged and the asset is isolated from use. Competent repair and a safe hand-back are verified before return, including after relocation or an event affecting safety where applicable.

Stop restrict and restart

Withdraw equipment when a guard, safety device, attachment, inspection or operating condition is unsafe or uncertain; stop the affected task pending verification.

The person controlling the work makes the affected area safe and notifies the Site Manager. Restart requires the competent technical decision for the actual control, the authorised work-release decision and a fresh briefing of affected people. Record unresolved limits; an updated date or a completed form does not remove a hold.

Practical control detail

Stop if a person is in the operating zone, the route or ground is unsafe, visibility fails, a load is unstable or a critical vehicle defect is unresolved.

Operators should identify obvious defects before use; competent people should inspect and test safety-critical features at intervals set by risk, conditions, manufacturer instructions and any equipment-specific law. A reported fault or modification calls for review before reuse.

Evidence follow up and learning

Worked decision trail

Fictional situationDecision and evidence
What changesA saw guard is sticking and someone proposes holding it open.
ResponseThe supervisor withdraws and quarantines the saw; a competent repair and safe verification precede return.
VerificationObserve the repaired safeguard in normal permitted use and retain the asset-specific repair evidence.

Supporting arrangement documents

ReferenceHow the document is used
BOUK-REG-PLANT-01
Plant, tools and maintenance register
Track asset ownership, suitability, inspections, servicing and defects.
BOUK-CHK-PLANT-01
Plant and powered-tool pre-use inspection
Identify damage, failed guards, interlocks, leaks and unsafe attachments.
BOUK-RA-PLANT-01
Machine guarding and entanglement assessment
Assess access to moving parts and select protective measures.
BOUK-RAMS-PLANT-01
Plant maintenance and stored-energy isolation RAMS
Control electrical, hydraulic, pneumatic, gravity and thermal energy.
BOUK-FRM-PLANT-01
Defect, quarantine and return-to-service record
Prevent unsafe reuse until competent repair and verification.
BOUK-RAMS-PLANT-02
Carpentry, joinery and timber-frame installation RAMS
Guarded cutting, wood dust, nail guns, handling, support and access.
BOUK-RAMS-PLANT-03
Pressure testing and commissioning RAMS
Stored energy, safe test boundaries, rated components and controlled depressurisation.

Retain the record ID, task, location, competent author, revision, date, decision, restrictions, action owner and separate effectiveness evidence. Restrict personal and health information and apply the relevant retention rule. File genuine results separately from teaching examples.

Guidance Provision and Use of Work Equipment (PUWER) · Mobile plant and vehicles · Guards and Machinery Interlocks

Content basis

Built from the BuildOut policy and arrangement register, the SHARE policy/risk/routine-checklist/audit databases and the linked SHAREknowledge topics.

Register legal summaries retain their own review dates. No actual inspection, clinical record, specialist certificate or company approval is represented.