BOUK-PRO-WAH | Version 1.0 | 23 October 2026 | GB baseline
COMPLETED FICTIONAL EXAMPLE. BuildOut UK Ltd is an illustrative construction business. The arrangements and cases below are examples for adaptation; no actual work, approval or signature is represented.
Select suitable collective protection/access equipment, verify competence and plan rescue.
Scope and operating responsibility
We apply this procedure to Install ceiling services using a podium or MEWP. Evidence includes Access selection and inspection; scaffold or MEWP handover; competence; falling-object and exclusion checks; rescue readiness. The role controlling the task checks applicability before mobilisation and whenever the scope changes.
| Role | Required action |
|---|---|
| Site manager | Own this arrangement, confirm competent support and maintain its evidence trail. |
| Project manager and Site manager | Coordinate the actual package, provide resources and verify prerequisites before release; resolve occupied and subcontractor interfaces. |
| Trade supervisor and workers | Use the accepted current method, demonstrate understanding, report changes and stop when critical safeguards are uncertain. |
| Competent specialist and H&S adviser | Provide technical advice within competence; challenge evidence and identify limitations. Management retains the operating decision. |
Inputs before using the procedure
Use the current project risk register, relevant survey and design revisions, equipment or product information, worker consultation and the task-specific records listed below. Resolve conflicting or missing information before relying on it. Do not fill missing technical values from an example.
How we carry out the arrangement
1 Plan and obtain reliable information
Plan ceiling service installation and similar tasks to avoid work at height where reasonably practicable. If unavoidable, select suitable collective protection and working equipment before personal fall protection.
2 Verify capability and prerequisites
The Site Manager checks podium or MEWP selection against ground, overhead structures, entrapment, reach, load and the actual task. Erected access and scaffold alterations use the appointed competent arrangement.
3 Control work and interfaces
Tools, materials, openings and people below are controlled together. The supervisor checks equipment, inspection status, access and changes of work front before use.
4 Review change and safe handback
The task has an effective recovery or rescue arrangement where needed, with capable people and equipment available; emergency services are additional support rather than the sole planned provision.
Stop restrict and restart
Stop height work when ground, weather, edge protection, access, equipment, falling-object protection or the required rescue capability no longer meets the plan.
The person controlling the work makes the affected area safe and notifies the Site Manager. Restart requires the competent technical decision for the actual control, the authorised work-release decision and a fresh briefing of affected people. Record unresolved limits; an updated date or a completed form does not remove a hold.
Practical control detail
Set the exact task and location, choose the safest practicable method, assign competent people, verify access and controls, protect others and make a workable rescue plan.
Check work equipment before use and arrange competent inspections at the frequency and after events required by the relevant law, manufacturer and risk assessment; take defective equipment out of service.
Evidence follow up and learning
Worked decision trail
| Fictional situation | Decision and evidence |
|---|---|
| What changes | The selected access platform cannot reach a ceiling task without overreaching. |
| Response | The supervisor stops use and obtains a suitable access method with collective protection and rescue provision where required. |
| Verification | Check reach, ground, exclusion and the actual task from a safe position before release. |
Supporting arrangement documents
| Reference | How the document is used |
|---|---|
| BOUK-RA-WAH-01 Work-at-height selection and rescue assessment | Evaluate avoidance, collective protection, access suitability and rescue needs. |
| BOUK-RAMS-WAH-01 Roof, fragile surface and edge work RAMS | Set access, fall/falling-object prevention, weather limits and emergency controls. |
| BOUK-RAMS-WAH-02 Scaffold, tower and MEWP work RAMS | Set erection/use limits, ground/access checks, competence and exclusion controls. |
| BOUK-FRM-WAH-01 Work-at-height equipment inspection report | Record required inspections, defects, restrictions and release of access equipment. |
| BOUK-CHK-WAH-01 Ladder and short-duration access justification/check | Demonstrate suitability for low-risk work and check condition and positioning. |
| BOUK-PLN-WAH-01 Suspended-person and MEWP rescue plan | Define competent rescue actions, equipment, communication and rehearsal. |
| BOUK-PLN-WAH-02 Scaffold design, assembly, use and dismantling plan | Confirm recognised configuration or competent calculations/design and a suitable assembly/use/dismantling plan. |
| BOUK-RAMS-WAH-03 Roof covering and rooflight replacement RAMS | Fragile surfaces, edges, material loading, weather and rescue. |
| BOUK-RAMS-WAH-04 Facade and cladding installation RAMS | Access, panel lifting, falling objects, temporary stability and public exclusion. |
| BOUK-RAMS-WAH-05 Drylining and suspended ceilings RAMS | Suitable access, overhead work, sharp edges, handling and trade interfaces. |
Retain the record ID, task, location, competent author, revision, date, decision, restrictions, action owner and separate effectiveness evidence. Restrict personal and health information and apply the relevant retention rule. File genuine results separately from teaching examples.
Guidance Working at Height · Dropped Objects · Scaffolding Safety