SHAREhub environment · FREE TRAINING

Free construction safety courses

Study a construction topic in depth, work through practical decisions and take the assessment in the LMS. Choose from 17 independent courses, including the asbestos reference.

Each course shows its estimated learning time and full outline. Public teaching and readers are free without an account. Use a free learner account for confirmed saved assessment, completion and certificate records.

Open the free LMS library →
SH-EXC-01

Excavations and buried services

Plan excavation, locate services and recognise instability before entry.

£0 · Free training

Approx. 2h–3h

Estimated self-paced learning

5 modules · 18 lessons · 20 final questions

  • Reconcile service information and safe-exposure evidence before ground penetration.
  • Identify protection, access, loading and inspection requirements for the actual excavation.
SH-WAH-01

Work at height and scaffold safety

Plan safe access, select suitable equipment and maintain protection at height.

£0 · Free training

Approx. 2h 10m–3h 10m

Estimated self-paced learning

5 modules · 18 lessons · 20 final questions

  • Apply the work-at-height hierarchy to the task and select a suitable access approach.
  • Check scaffold, opening, fragile-surface and equipment protection against the actual work.
SH-PLT-01

Construction traffic and mobile plant

Coordinate construction traffic, mobile plant, deliveries and pedestrian routes.

£0 · Free training

Approx. 2h–3h

Estimated self-paced learning

5 modules · 18 lessons · 20 final questions

  • Plan separation between pedestrians, deliveries and mobile-plant movements.
  • Identify the load, ground, visibility and operator evidence needed for the proposed movement.
SH-SIL-01

Silica dust in construction

Recognise silica exposure and verify controls through cutting, cleaning and change.

£0 · Free training

Approx. 2h 10m–3h 10m

Estimated self-paced learning

5 modules · 18 lessons · 20 final questions

  • Recognise silica-generating materials, tasks and exposure beyond the tool operator.
  • Compare suppression, extraction and respiratory protection within the assessed control system.
SH-CHM-01

Hazardous substances in construction

Control cement, coating and lead exposure across construction tasks and cleanup.

£0 · Free training

Approx. 2h 30m–3h 20m

Estimated self-paced learning

5 modules · 18 lessons · 20 final questions

  • Use substance information to assess cement, coating and lead exposure in the actual task.
  • Select source controls, separation and hygiene for the relevant exposure routes.
SH-CS-01

Confined spaces in construction

Challenge confined-space entry and verify isolation, atmosphere and rescue.

£0 · Free training

Approx. 2h 10m–3h

Estimated self-paced learning

5 modules · 18 lessons · 20 final questions

  • Challenge whether the task can be achieved safely without confined-space entry.
  • Identify the isolation, atmosphere, communication and safe-system evidence needed for unavoidable entry.
SH-CMG-01

Construction planning, coordination and learning

Connect construction planning, responsibilities, coordination and learning.

£0 · Free training

Approx. 2h 10m–3h

Estimated self-paced learning

5 modules · 18 lessons · 20 final questions

  • Connect construction dutyholder responsibilities with current task and phase information.
  • Check competence, workface risk assessment and coordination when activities change.
SH-ELC-01

Electrical safety on construction sites

Recognise electrical hazards and verify safe supplies, equipment and isolation.

£0 · Free training

Approx. 1h 50m–2h 40m

Estimated self-paced learning

5 modules · 18 lessons · 20 final questions

  • Recognise unsafe temporary supplies, damaged equipment and electrical exposure at the workface.
  • Identify the competent selection, protection, inspection and isolation arrangements needed.
SH-EMR-01

Construction emergencies and work near water

Prepare construction emergency responses, first aid and work-near-water controls.

£0 · Free training

Approx. 1h 40m–2h 30m

Estimated self-paced learning

5 modules · 18 lessons · 20 final questions

  • Connect site alarms, access, first-aid needs and communication to credible emergencies.
  • Identify drowning prevention and suitable planned rescue for work near water.
SH-ENV-01

Ground contamination and environmental control

Control contaminated ground, infection pathways, spills, waste and site runoff.

£0 · Free training

Approx. 2h 20m–3h 20m

Estimated self-paced learning

5 modules · 18 lessons · 20 final questions

  • Trace contamination and pollution from the source through a pathway to people or the environment.
  • Choose suitable hygiene, drainage, transfer and waste controls for the actual site task.
SH-FIR-01

Construction fire safety and hot work

Plan construction fire prevention, hot work, storage, alarms and escape.

£0 · Free training

Approx. 1h 50m–2h 40m

Estimated self-paced learning

5 modules · 18 lessons · 20 final questions

  • Identify construction fire risks from hot work, fuels, gases and battery charging.
  • Connect prevention and permit controls with alarms, escape and site-phase changes.
SH-LFT-01

Lifting operations on construction sites

Verify loads, lifting equipment, ground support, movement and safe landing.

£0 · Free training

Approx. 2h–3h

Estimated self-paced learning

5 modules · 18 lessons · 20 final questions

  • Verify the load, configuration, rigging and route assumptions before a lifting operation.
  • Identify suitable ground support, equipment condition, exclusion and communication evidence.
SH-PHY-01

Noise, vibration and radiation in construction

Recognise construction noise, vibration and radiation risks and select controls.

£0 · Free training

Approx. 2h–2h 50m

Estimated self-paced learning

5 modules · 18 lessons · 20 final questions

  • Recognise task-related noise, hand-arm vibration, whole-body vibration and specialist radiation risks.
  • Compare source, equipment, route and work-organisation controls for the exposure.
SH-TWD-01

Temporary works, structural stability and demolition

Connect temporary works, structural stability and safe demolition sequences.

£0 · Free training

Approx. 2h 10m–3h 10m

Estimated self-paced learning

5 modules · 18 lessons · 20 final questions

  • Connect temporary-works design and release conditions with the actual construction sequence.
  • Identify structural and demolition information needed before removing or changing support.
SH-WEL-01

Construction welfare, wellbeing and human factors

Plan construction welfare, wellbeing, human factors and changing site conditions.

£0 · Free training

Approx. 2h–2h 50m

Estimated self-paced learning

5 modules · 18 lessons · 20 final questions

  • Check usable welfare and suitable arrangements through site moves and seasonal change.
  • Recognise stress, fatigue, aggression and other human-factor signals that affect work.
SH-EQP-01

Safe use and maintenance of construction equipment

Select and maintain construction equipment, guards and safe isolation methods.

£0 · Free training

Approx. 1h 50m–2h 40m

Estimated self-paced learning

5 modules · 18 lessons · 20 final questions

  • Select construction equipment that suits the task and actual operating conditions.
  • Identify guarding, maintenance and stored-energy controls for use, cleaning and clearing jams.
SH-ASB-01

Asbestos awareness in construction

Recognise asbestos risks, check task information and rehearse stop-work decisions.

£0 · Free training

Approx. 2h–2h 30m

Estimated self-paced learning

5 modules · 24 lessons · 25 final questions

  • Recognise where asbestos may be encountered without relying on appearance or the senses.
  • Compare the proposed intrusive task with the survey scope and material information.

Learn, practise and keep a confirmed record

The full courses combine substantial teaching, workface examples, feedback and varied activities. Relevant construction courses include opportunities to practise in the actual model, with an equivalent accessible text route. The asbestos reference includes its illustrated location activities and practical cases.

Complete all required learning, meet the final pass threshold and answer every critical safety question correctly. The LMS then applies its completion and certificate conditions.

These independent courses support construction learning. Competent site assessment, role-specific practical training and task authorisation remain necessary. They do not confer a NEBOSH qualification.