SHARE Knowledge Hub
Health and Safety Culture and Behavioural Change
Health and safety culture and behavioural change builds on basic culture awareness by asking how safer behaviour is actually created, supported, measured and sustained. This deeper professional page focuses on behavioural programmes, just culture, trust, maturity, system causes and change design. Good behavioural change does not blame frontline workers or rely on posters; it examines job design, equipment, supervision, workload, leadership, peer norms, competence, fair accountability and whether management acts on weak signals.
Understanding Health and Safety Culture and Behavioural Change
Health and safety culture and behavioural change builds on basic culture awareness by asking how safer behaviour is actually created, supported, measured and sustained. This deeper professional page focuses on behavioural programmes, just culture, trust, maturity, system causes and change design. Good behavioural change does not blame frontline workers or rely on posters; it examines job design, equipment, supervision, workload, leadership, peer norms, competence, fair accountability and whether management acts on weak signals.
Why this matters at work
Stop or redesign a behavioural intervention if it is being used to justify work with a failed physical barrier, if workers cannot perform the requested action, if observers are pressed to conceal serious findings, if reporting collapses, or if resources are diverted from critical maintenance.
Look for three levels of effect: implementation (was the intended action performed?), intermediate control (did the barrier become more reliable or exposure reduce?), and outcome or resilience (did serious events, failures or recovery performance change?). Serious harm may be too rare for a short evaluation; do not infer success from zero events. Use defect recurrence, critical test status, worker feedback, abnormal-condition drills and near-miss quality as complementary evidence. Consider a comparison area when feasible, but do not claim scientific causal certainty from a before-and-after graph alone.
How organisations manage this in practice
Define the unit of change before choosing a method. If the concern is an operator bypassing a guard because a part cannot be reached, the first problem may be equipment design. If the concern is a manager repeatedly deferring a critical test, the target behaviour is a management decision, not operator PPE. If near misses are not reported because staff fear loss of bonus, redesign the incentive and feedback process. A cultural aim such as 'more ownership' is too vague until it is tied to a decision, control and evidence of effect.
A practical sequence is: define the risk and legal controls; test higher-order and critical barriers; analyse human-task demands and performance-influencing factors; consult workers; choose a narrow residual action; establish baseline and data safeguards; pilot with trained facilitators; act immediately on danger; give respectful feedback; correct system weaknesses; verify effect and adverse consequences; and review whether to scale or stop.
Analyse the job, the person and the organisation in combination. Task analysis should cover normal, start-up, cleaning, maintenance, shift handover and abnormal work. Consider fatigue, language, visibility, physical reach, contractor status and access to competent help. Ask what changes when the workload peaks and whether the process gives people enough time and information to respond. Do not use personality tests or motivation slogans as a shortcut for a badly designed task. HSE warns against assuming an operator will always be present, notice a problem instantly and intervene heroically.
What are the key points for culture and behavioural change?
Behavioural change works when it fixes the conditions that shape behaviour, not just the behaviour that is easiest to see.
What are the key points for culture and behavioural change? — part 1 of 2
Read the complete visual as text
- Behavioural change works when it fixes the conditions that…: Behavioural change works when it fixes the conditions that shape behaviour, not just the behaviour that is easiest to see.
- Behaviour has context: People respond to workload, equipment, supervision, peer norms, incentives, fatigue and procedure usability.
- Trust is a control condition: People will not report, challenge or admit mistakes if they expect blame or inaction.
What are the key points for culture and behavioural change? — part 2 of 2
Read the complete visual as text
- Behavioural safety has limits: Observation and feedback can help, but they must not distract from engineering, maintenance or major accident barriers.
- Just culture is not no-blame: A fair culture learns from error and investigates deliberate disregard with proportionate accountability.
- Sustained change needs evidence: Surveys, interviews, field observations, indicators and action close-out should show whether change is working.
Behaviour has context
People respond to workload, equipment, supervision, peer norms, incentives, fatigue and procedure usability.
Trust is a control condition
People will not report, challenge or admit mistakes if they expect blame or inaction.
Behavioural safety has limits
Observation and feedback can help, but they must not distract from engineering, maintenance or major accident barriers.
Just culture is not no-blame
A fair culture learns from error and investigates deliberate disregard with proportionate accountability.
Sustained change needs evidence
Surveys, interviews, field observations, indicators and action close-out should show whether change is working.
How does this page build on the main culture page?
This page moves from recognising culture to designing, testing and sustaining behavioural and system change.
The main culture page is the broad starting point: leadership, climate, indicators, peer influence, worker voice and sector examples. This page assumes that foundation and goes further into how change programmes should be diagnosed, designed, governed and reviewed.
That distinction matters because poor behavioural change work can damage trust. If a programme observes workers without fixing poor tools, workload, staffing, maintenance, procedure design or leadership pressure, it can look like blame dressed up as improvement.
| Foundation topic | Deeper behavioural change question | Professional judgement needed |
|---|---|---|
| Leadership and climate | Which leadership behaviours are reinforcing current norms? | Check what leaders resource, ask about, tolerate and respond to. HSE behavioural safety and major hazards |
| Indicators and worker voice | Which data sources show whether change is real or only perceived? | Triangulate surveys, interviews, observations, findings and action closure. HSE behavioural safety and major hazards |
| Peer influence | Which team norms need strengthening or changing? | Use respected local voices without shifting ownership away from management. HSE behavioural safety and major hazards |
| Incident learning | Which system causes made the behaviour likely? | Use just culture and human factors before selecting intervention. HSE behavioural safety and major hazards |
| Management system | How will the change be embedded? | Connect actions to procedures, training, supervision, procurement, maintenance and review. HSE behavioural safety and major hazards |
This page tests how work design and management decisions shape behaviour, beyond the main culture overview. HSE organisational culture HSE behavioural safety and major hazards
What does health and safety culture and behavioural change mean?
It means understanding the cultural and system conditions that shape behaviour, then improving them so safer choices become normal and sustainable.
Behavioural change is often misunderstood as telling workers to take more care. That is too shallow. A professional approach asks why the behaviour made sense in the moment: was the job poorly designed, was equipment unavailable, was production pressure stronger than supervision, was the procedure unusable, was staffing thin, was the peer norm unsafe or had past concerns been ignored?
Culture change therefore needs both human and organisational work. It may involve better leadership routines, simpler reporting, improved maintenance, clearer standards, redesigned jobs, better supervision, fair investigations, worker-led improvements and targeted coaching.
| Focus area | Question to ask | Example |
|---|---|---|
| Job design | Does the task make safe behaviour easy or difficult? | Guarded access point added so cleaning no longer requires awkward reach. HSE behavioural safety and major hazards |
| Leadership | What do leaders resource, tolerate and ask about? | Board reviews overdue critical actions rather than only injury rates. HSE behavioural safety and major hazards |
| Peer norms | What does the team treat as normal? | New starters copy experienced workers' lock-off discipline. HSE behavioural safety and major hazards |
| Trust | Do people believe reporting leads to fair action? | Near-miss reporter receives feedback and sees the fix implemented. HSE behavioural safety and major hazards |
| Competence | Do people understand the hazard and limits? | Operators practise abnormal response, not just normal operation. HSE behavioural safety and major hazards |
| Learning | Are lessons embedded or repeatedly rediscovered? | Repeat findings trigger system redesign and corporate memory update. HSE behavioural safety and major hazards |
Treat an observed shortcut as a signal to examine equipment, workload, procedures and incentives, not automatic proof of personal fault. HSE behavioural safety and major hazards
Why do people behave the way they do at work?
Source model and SHARE application
HSE’s core human-factors framing is job, individual and organisation. The additional Team and External context layers here are SHARE explanatory extensions. These learning prompts are not an official marking scheme. No visible dust plume does not establish adequate control of invisible respirable silica.
People behave according to the task, individual capability and organisational conditions around them.
HSE's human factors framing is useful because it avoids blaming behaviour in isolation. The job may create error traps through poor layout, confusing controls, unclear procedures, interruptions or impossible time targets. The individual may be fatigued, inexperienced, overloaded or uncertain. The organisation may reward output, under-resource maintenance or fail to act on weak signals.
A behavioural change programme that ignores any of these layers will be fragile. It may improve visible behaviours for a short time while leaving deeper causes untouched.
| Layer | What to examine | Example intervention |
|---|---|---|
| Job | Task design, tools, access, environment, workload, interface and procedure usability. | Redesign task, improve access, simplify procedure or add engineering control. HSE introduction to human factors |
| Individual | Competence, fatigue, health, language, experience, confidence and attention. | Role-specific training, coaching, rest planning or supervision. HSE introduction to human factors |
| Team | Peer norms, informal rules, communication and local leadership. | Team standards, peer champions and supervisor coaching. HSE introduction to human factors |
| Organisation | Resources, incentives, maintenance, procurement, staffing, investigation and leadership priorities. | Management review, budget decision, KPI reset or assurance programme. HSE introduction to human factors |
| External context | Client demands, regulators, contractors, public interface and supply chain pressure. | Contractor rules, client planning and procurement standards. HSE introduction to human factors |
Concrete-cutting behaviour depends on tool design, available extraction, schedule and supervision as well as worker knowledge. HSE introduction to human factors
How does human performance affect this work?
Explore whether an action was unintended, a decision made with incomplete understanding, or a deliberate deviation. Then ask what task and organisational conditions need to change alongside any learning support.
Select any box to open its explanation below. You can also use the grouped text headings. Several explanations can stay open for comparison.
Original SHARElearn teaching overview. Arrows show groupings, not a causal sequence. Examples are fictional; no box establishes an actual cause, diagnosis or responsibility.
Inspect the full-size overview (new tab)
Start with the work context
Human performance in context
Human factors considers how the job, the individual and the organisation interact. A human action is a starting point for inquiry, not a complete explanation.
Fictional example: A pump control is operated incorrectly. The team examines what the operator could see, the control layout and the work arrangements.
Investigate and improve: Reconstruct the information and options available at the time. Ask what made the action understandable and what would prevent or tolerate it.
Unintended errors
An action or decision goes wrong without an intended departure from the expected method. Distinguish doing the wrong action from choosing an unsuitable plan.
Fictional example: A person intends to stop pump A but presses the adjacent control for pump B.
Investigate and improve: An outcome alone does not establish intent. Compare the person’s account, task sequence, equipment and available records; retain uncertainty.
Unintended errors: actions and decisions
Skill-based action errors
A familiar task is intended correctly but its execution goes wrong through a slip or lapse. Experienced people can be affected.
Fictional example: A routine restart is interrupted and the person resumes at the wrong point.
Investigate and improve: Examine distractions, task design and place-keeping aids. Repeating training alone does not remove the conditions that permit these errors.
Slips of action
The intended action is clear, but a different action is performed.
Fictional example: While reaching to stop a pump, a person operates a similar-looking neighbouring switch.
Investigate and improve: Check control spacing, identification, feedback, visibility and interruption. Consider clearer separation or error-tolerant design, with competent review and testing.
Lapses of memory
A needed step is forgotten or the person loses their place.
Fictional example: After an interruption, a person omits a required check while believing the sequence is complete.
Investigate and improve: Check the interruption and restart arrangements. Consider point-of-use prompts, reliable step records and proportionate independent checks for critical steps.
Mistakes in planning or judgement
The chosen action is carried out as intended, but the plan or judgement is unsuitable.
Fictional example: A person selects a familiar response to a warning, believing it fits the present conditions.
Investigate and improve: Check what was known, what the rule covered and how the situation was understood. Consider information, decision support and task-specific competence.
Rule-based mistakes
A remembered rule is misapplied, or an unsuitable rule is used. An apparently missing good rule also needs inquiry: was it known, understood and applicable?
Fictional example: A response suitable for pump A is applied to pump B even though their isolation requirements differ.
Investigate and improve: Inspect the actual procedure and its scope, access and revision. Explore interpretation. Missing a step does not by itself prove a deliberate deviation.
Knowledge-based mistakes
An unfamiliar situation is approached through reasoning without a suitable established solution; the resulting judgement is wrong.
Fictional example: An unusual pump condition is interpreted using incomplete information, leading to an inappropriate response.
Investigate and improve: Examine information gaps and available support. Improve escalation, diagnostic aids and arrangements for obtaining competent advice before uncertain work proceeds.
Deliberate deviations: understand why
Deliberate deviations / violations
A rule or procedure is knowingly departed from. The departure is intentional; harm need not be intended. Establish this distinction through evidence.
Fictional example: A required verification is knowingly bypassed to continue a task.
Investigate and improve: Ask why the rule was bypassed, whether it was workable and what the organisation encouraged or tolerated. Fair accountability and system improvements can both be needed.
Routine deviations
Departures become the usual way work is carried out.
Fictional example: A team commonly skips a required handover check and supervisors accept the practice.
Investigate and improve: Compare written arrangements with everyday work, including management knowledge and response. Make the safe method workable and verify that practice changes.
Situational deviations
A departure is associated with conditions such as time pressure, insufficient resources or unsuitable equipment. These conditions do not authorise unsafe work.
Fictional example: The correct equipment is unavailable and a deadline encourages an improvised shortcut.
Investigate and improve: Check resources, conflicting targets and whether people can stop and escalate. Remove the pressure or constraint rather than treating the shortcut as the solution.
Exceptional deviations
A departure occurs in unusual circumstances outside normal practice. This label is not an automatic justification.
Fictional example: During an unfamiliar equipment upset, a person knowingly bypasses a rule while trying to restore operation.
Investigate and improve: Reconstruct the situation and information available. Review abnormal-event preparation, support, escalation and protection; do not infer malicious intent from the outcome.
Check factors across every branch
Performance influencing factors
Conditions affecting performance can sit within the job, the individual or the organisation. Consider them across errors and deviations.
Fictional example: A difficult control layout combines with an interrupted shift and a production target.
Investigate and improve: Identify specific conditions, their evidence and how they interacted. Do not turn a list of factors into unsupported causal conclusions.
Job and task factors
Consider the work itself: equipment, interface design, instructions, workload, environment, timing and communication.
Fictional example: Two similar controls are poorly lit while alarms and interruptions compete for attention.
Investigate and improve: Observe representative work safely, compare intended and actual demands, and test feasible design changes with the people doing the task.
Individual factors
Consider relevant knowledge, experience, abilities and current needs fairly. Observed behaviour does not establish a health diagnosis or intent.
Fictional example: A newly assigned worker does not understand an unfamiliar alarm; a colleague also reports yawning after a long shift.
Investigate and improve: Check induction, understanding, shift and welfare information through appropriate private routes. Yawning alone proves neither fatigue nor the cause of an event; seek competent support when needed.
Organisational factors
Consider staffing, resources, supervision, targets, planning, culture, change management and learning from earlier events.
Fictional example: A known leak remains open because repair responsibility is unclear and closure is recorded without checking the work.
Investigate and improve: Trace decisions, ownership and earlier warnings. Improve the underlying arrangements and verify effectiveness, rather than closing the investigation at “operator error”.
Try the evidence questions
Choose one fictional pump or travel example. What is observed, what remains a hypothesis, which job or organisational factor needs checking, and what improvement would you test? Explain what evidence would change your view.
Explore at your own pace. These are optional thinking prompts: this page does not save answers, assess performance or create a learning record.
Sources and scope
Original SHARElearn overview informed by HSE guidance. The diagram groups concepts for learning; it does not model a causal sequence. Guidance checked 1 November 2026.
Continue with the incident and accident investigation course. The course outline explains its learning, optional reflections and completion requirements.
How should behavioural change be planned?
Behavioural change should be diagnosed, co-designed, piloted, implemented, measured and adapted with worker involvement.
Starting with a campaign is tempting but often weak. A better route starts by diagnosing the behaviour and its context. What behaviour is causing or failing to control risk? Why is it happening? What signals do people receive? Which system conditions need to change before asking people to behave differently?
Worker involvement is essential because workers know which proposed changes will survive real work. The best programmes use local language, local examples and visible leadership follow-through.
| Step | Purpose | Example |
|---|---|---|
| Diagnose | Understand the behaviour, risk and system causes. | Observation shows guards removed because cleaning access is poor. HSE behavioural safety approaches |
| Co-design | Involve workers and supervisors in practical solutions. | Team redesigns cleaning method and suggests access improvements. HSE behavioural safety approaches |
| Pilot | Test in one area before rollout. | Trial new access tool and supervisor check for four weeks. HSE behavioural safety approaches |
| Implement | Change equipment, procedures, briefing, coaching and supervision. | Install access improvement and brief new standard. HSE behavioural safety approaches |
| Measure | Check behaviour, incidents, defects, worker feedback and action data. | Compare defeated guard reports and observations. HSE behavioural safety approaches |
| Sustain | Embed into training, procurement, audits and management review. | Add to induction, maintenance schedule and audit protocol. HSE behavioural safety approaches |
Co-design a pilot with workers, fix practical barriers and test the live task before scaling an observation programme. HSE behavioural safety approaches
What can behavioural safety programmes do well?
Behavioural safety programmes can improve discussion, observation and feedback when they are fair, local and connected to real risk controls.
Observation and feedback can help supervisors and workers talk about safety in the workplace. They can make management more visible, reveal practical barriers and create leading indicators. They are most useful when observations look at both safe and unsafe behaviours and ask what system conditions made the behaviour likely.
The programme should not be a card-counting exercise. The quality of conversations, learning and action matters more than the number of observations submitted.
| Strength | How it adds value | Control condition |
|---|---|---|
| Visible conversations | Managers and peers discuss risk at the point of work. | Conversations must be respectful and specific. HSE behavioural safety approaches |
| Worker involvement | People contribute to defining safe behaviours and barriers. | Workers must see actions from feedback. HSE behavioural safety approaches |
| Leading information | Observation themes can reveal drift before incidents. | Data must be interpreted with risk context. HSE behavioural safety approaches |
| Coaching | Immediate feedback can reinforce good practice. | Observers need skill and trust. HSE behavioural safety approaches |
| System learning | Repeated behaviours reveal design, workload or supervision issues. | Root causes must be acted on. HSE behavioural safety approaches |
Observations and feedback can help with residual actions after source controls work; they cannot make failed extraction safe. HSE behavioural safety approaches
Where do behavioural change programmes commonly fail?
They fail when they blame workers, chase visible behaviours and ignore engineering, organisational or major accident controls.
HSE warns that behavioural approaches can draw attention toward easy-to-observe personal safety behaviours while missing low-frequency high-consequence hazards. A process site that measures glove wearing but ignores alarm floods, bypassed trips or maintenance backlog is not managing the main risk.
A programme can also damage trust if observation feels like surveillance, if data is used to punish teams, or if workers report system barriers that management does not fix.
| Pitfall | Why it matters | Better approach |
|---|---|---|
| Frontline blame | Workers are treated as the problem while system causes remain. | Ask why the behaviour made sense and fix task conditions. HSE behavioural safety and major hazards |
| Easy metrics | PPE and housekeeping dominate because they are visible. | Include risk-critical behaviours and management behaviours. HSE behavioural safety and major hazards |
| Ignoring major hazards | Process safety barriers, staffing, alarms and maintenance drift are missed. | Connect observations to barrier health and process safety indicators. HSE behavioural safety and major hazards |
| Low trust | People hide problems or perform for observers. | Build confidentiality, fairness and feedback. HSE behavioural safety and major hazards |
| Off-the-shelf design | Generic language does not fit local work or culture. | Co-design locally and pilot before rollout. HSE behavioural safety and major hazards |
| No action route | Observation data accumulates without system improvement. | Assign actions, owners and effectiveness checks. HSE behavioural safety and major hazards |
Counting respirator use while silica escapes misses the system failure that can cause chronic lung disease. HSE behavioural safety and major hazards
How should just culture support behavioural change?
A fair response investigates work design, pressures and decisions, while keeping accountability proportionate to the evidence.
Ask what happened, what the person knew, whether the safe method was workable, and how equipment, workload, supervision and incentives shaped the decision. An unintended error, an impractical rule and a deliberate disregard need different evidence and a proportionate response; no single decision tree should replace investigation.
Different causes need different responses. An unintended error may call for design or system improvement. A deliberate deviation needs investigation of why the rule was broken, including whether it was workable and what managers encouraged. Accountability should follow the evidence; management-created conditions require management action.
| Situation | Fair response | Poor response |
|---|---|---|
| Human error | Console, redesign and improve system defences. | Punish the person and leave the trap in place. Human factors HSE managing human failures |
| Repeated shortcut under pressure | Investigate incentives, usability and drift; correct the cause and coach where appropriate. | Ignore because no one was hurt. Human factors HSE managing human failures |
| Routine workaround | Ask why the rule cannot be followed and redesign it. | Tell people to comply with an unusable procedure. Human factors HSE managing human failures |
| Deliberate disregard after workable controls | Establish the facts, protect others and apply proportionate accountability. | Hide behind no-blame language. Human factors HSE managing human failures |
| Management-created pressure | Review workload, resources, programme and incentives. | Blame workers for rushing. Human factors HSE managing human failures |
HSE distinguishes unintended error from deliberate deviation and warns against scapegoating when management conditions contribute. The examples below are investigation prompts, not automatic disciplinary categories. HSE learning organisations HSE managing human failures
Respond fairly to decisions while investigating whether the system made a safe action feasible. HSE behavioural safety and major hazards
How should safety climate and maturity models be used?
Climate and maturity tools should guide improvement conversations, not create labels or false certainty.
A safety climate survey can show whether people perceive leadership, communication, involvement and trust positively. A maturity model can help discuss whether the organisation is reactive, compliant, proactive or generative. Both are useful only if they lead to action.
The most useful question is not 'what score did we get?' but 'what decision should change because of what people told us?'
| Tool | Useful for | Caution |
|---|---|---|
| Climate survey | Measuring perceptions and identifying themes. | Do not run unless confidentiality and follow-up are credible. HSE behavioural safety and major hazards |
| Focus groups | Understanding the story behind survey scores. | Requires skilled facilitation and trust. HSE behavioural safety and major hazards |
| Maturity model | Discussing current state and improvement path. | Avoid labelling teams or oversimplifying complex reality. HSE behavioural safety and major hazards |
| Culture dashboard | Combining indicators over time. | Avoid green dashboards that hide under-reporting. HSE behavioural safety and major hazards |
| Leadership review | Turning findings into resourcing and policy decisions. | Do not reduce culture to a communications campaign. HSE behavioural safety and major hazards |
A culture score is a prompt to inspect field controls and speak with workers, not an audit pass. HSE organisational culture
Why does trust decide whether culture change works?
Trust decides whether people report weak signals, take part honestly and believe management will act fairly.
People judge culture change by what happens after the first uncomfortable report. If a worker raises a concern about staffing, maintenance, bullying, fatigue or a defeated safeguard and nothing changes, the next survey or observation programme will be weaker before it starts.
Trust is built through repeated visible action: listening, giving feedback, explaining decisions, closing actions, protecting reporters and acknowledging when management decisions contributed to risk.
| Action | Why it matters | Evidence |
|---|---|---|
| Feedback to reporters | Shows speaking up changes something. | Report response times and you said/we did updates. HSE behavioural safety and major hazards |
| Fair investigations | Encourages honesty after mistakes. | Human factors investigation records. HSE behavioural safety and major hazards |
| Visible action closure | Converts concern into improvement. | Photos, records and field verification. HSE behavioural safety and major hazards |
| Leadership humility | Shows management will hear bad news. | Walkaround themes and management commitments. HSE behavioural safety and major hazards |
| Confidentiality where needed | Supports honest survey and wellbeing input. | Survey design and data protection controls. HSE behavioural safety and major hazards |
Workers are more likely to report a failed extractor when defects trigger repair rather than blame. HSE organisational culture
What examples make culture and behavioural change practical?
Examples help distinguish behaviour symptoms from the system causes that create them.
Worked behavioural change examples — part 1 of 2
Read the complete visual as text
- Warehouse pedestrians cut through vehicle route: Behaviour symptom: Workers ignore marked walkway. System cause to test: Walkway adds distance, barriers are missing and supervisors accept shortcut. Better intervention: Redesign route, install physical segregation and coach supervisors.
- Maintenance team bypasses interlock: Behaviour symptom: Interlock defeated during cleaning. System cause to test: Access is poor, downtime pressure is high and permit checks are weak. Better intervention: Engineer safer access, revise permit and audit bypass control.
- Construction workers skip dust controls: Behaviour symptom: On-tool extraction not used. System cause to test: Vacuum is unavailable, attachments do not fit and programme rewards speed. Better intervention: Procure compatible kit, plan time and verify controls.
Worked behavioural change examples — part 2 of 2
Read the complete visual as text
- Office staff ignore DSE breaks: Behaviour symptom: People work long screen periods. System cause to test: Workload, meeting culture and manager expectations drive sedentary work. Better intervention: Redesign meeting norms, workload planning and prompts.
- Process site reports perfect PPE use: Behaviour symptom: Observation cards are all positive. System cause to test: Programme measures easy behaviours while leaks and alarms are ignored. Better intervention: Include barrier health, management behaviours and weak-signal reporting.
| Scenario | Behaviour symptom | System cause to test | Better intervention |
|---|---|---|---|
| Warehouse pedestrians cut through vehicle route | Workers ignore marked walkway. | Walkway adds distance, barriers are missing and supervisors accept shortcut. | Redesign route, install physical segregation and coach supervisors. HSE Buncefield learning |
| Maintenance team bypasses interlock | Interlock defeated during cleaning. | Access is poor, downtime pressure is high and permit checks are weak. | Engineer safer access, revise permit and audit bypass control. HSE Buncefield learning |
| Construction workers skip dust controls | On-tool extraction not used. | Vacuum is unavailable, attachments do not fit and programme rewards speed. | Procure compatible kit, plan time and verify controls. HSE Buncefield learning |
| Office staff ignore DSE breaks | People work long screen periods. | Workload, meeting culture and manager expectations drive sedentary work. | Redesign meeting norms, workload planning and prompts. HSE Buncefield learning |
| Process site reports perfect PPE use | Observation cards are all positive. | Programme measures easy behaviours while leaks and alarms are ignored. | Include barrier health, management behaviours and weak-signal reporting. HSE Buncefield learning |
A fuel-depot card count does not show whether overfill protection and alarms are available. HSE behavioural safety and major hazards HSE Buncefield learning
What evidence shows behavioural change is working?
Evidence should show safer conditions, better reporting, reduced weak signals and verified improvement, not just more observation cards.
| Evidence | What it shows | What to challenge |
|---|---|---|
| Observation quality | Whether conversations identify real barriers and root causes. | Are cards meaningful or just counts? HSE behavioural safety and major hazards |
| Worker feedback | Whether people trust the programme and see change. | Are difficult themes being heard? HSE behavioural safety and major hazards |
| Action close-out | Whether system causes are fixed. | Are actions verified in the field? HSE behavioural safety and major hazards |
| Risk indicators | Whether high-risk controls improve. | Are major hazard barriers included? HSE behavioural safety and major hazards |
| Incident themes | Whether repeat causes reduce. | Are investigations still blaming individuals? HSE behavioural safety and major hazards |
| Leadership review | Whether leaders resource changes. | Are findings changing priorities and budgets? HSE behavioural safety and major hazards |
Track control repair, source exposure and worker feedback alongside behaviour observations. HSG254 Developing process safety indicators HSE behavioural safety and major hazards
How can the hierarchy of controls reduce risk before relying on safety culture and behaviour change?
ERICPD is used here as a planning mnemonic. The linked HSE five-level hierarchy is the official source for the order and relative reliability of controls; the two labels are not identical.
A manager or observer can enable and verify a control, but the hierarchy applies to the real vehicle, dust or overfill hazard.
How do ERICPD and the five-level hierarchy test the physical control? — part 1 of 2
Read the complete visual as text
- ERICPD is used here as a planning mnemonic. The…: ERICPD is used here as a planning mnemonic. The linked HSE five-level hierarchy is the official source for the order and relative reliability of controls; the two labels are not identical.
- A manager or observer can enable and verify a…: A manager or observer can enable and verify a control, but the hierarchy applies to the real vehicle, dust or overfill hazard.
How do ERICPD and the five-level hierarchy test the physical control? — part 2 of 2
Read the complete visual as text
- A refurbishment crew chases concrete for electrical containment. Cutting…: A refurbishment crew chases concrete for electrical containment. Cutting releases respirable crystalline silica; breathing it can cause silicosis, chronic obstructive pulmonary disease and lung cancer. A behaviour observation can reveal missing extraction, but the first decision is whether the dusty cut can be removed or controlled at source. HSE chasing concrete and mortar HSE silica cancer and lung-disease risk
- ERICPD is a six-stage planning aid; HSE’s five levels…: ERICPD is a six-stage planning aid; HSE’s five levels separate substitution, engineering, administration and residual PPE. Isolate usually maps to engineered separation; ERICPD Control can be physical or administrative. Discipline sustains a control through supervision, maintenance and learning and cannot replace it. HSE five-level hierarchy HSE five-level hierarchy
A refurbishment crew chases concrete for electrical containment. Cutting releases respirable crystalline silica; breathing it can cause silicosis, chronic obstructive pulmonary disease and lung cancer. A behaviour observation can reveal missing extraction, but the first decision is whether the dusty cut can be removed or controlled at source. HSE chasing concrete and mortar HSE silica cancer and lung-disease risk
ERICPD is a six-stage planning aid; HSE’s five levels separate substitution, engineering, administration and residual PPE. Isolate usually maps to engineered separation; ERICPD Control can be physical or administrative. Discipline sustains a control through supervision, maintenance and learning and cannot replace it. HSE five-level hierarchy HSE five-level hierarchy
How should management verify controls for this task?
For concrete chasing with respirable silica during refurbishment, the management check should start with a real control decision: Use surface-mounted containment or a preformed service route so no concrete chase is cut. Name the person who will test it, keep evidence from the actual work, and reopen the assessment when the failure condition in the hierarchy table occurs. HSE management-system guidance.
A review should compare the planned control with what workers and supervisors can use in practice. Record the defect, owner, interim protection, verification and next review trigger so that a policy statement or certificate does not stand in for a working control.
Which duties apply in Great Britain and Northern Ireland?
Culture, behaviour and leadership support the applicable duties, but no statute requires a slogan or observation-card programme.
Use the instrument for the site’s jurisdiction and representative structure. Statutory reporting of specified dangerous occurrences is distinct from learning from ordinary near misses. Management of Health and Safety at Work Regulations 1999 Management of Health and Safety at Work Regulations (NI) 2000 HSE consulting and involving workers HSENI trade-union representatives and consultation
| Decision | Great Britain | Northern Ireland |
|---|---|---|
| General work duties | GB Health and Safety at Work etc. Act 1974: protect workers and affected others. Instrument | NI Health and Safety at Work Order 1978: separate NI general duty. Instrument |
| Assessment and management | GB Management Regulations 1999: suitable assessment and effective planning, control, monitoring and review. Instrument | NI Management Regulations 2000: separate NI assessment and arrangements route. Instrument |
| Recognised union safety representatives | GB Safety Representatives and Safety Committees Regulations 1977 apply where representatives are appointed by a recognised union. Instrument | NI Safety Representatives and Safety Committees Regulations 1979 provide the corresponding NI route. Instrument |
| Other employee consultation | GB Consultation with Employees Regulations 1996 apply where the 1977 representative route does not cover workers. Instrument | NI Consultation with Employees Regulations 1996 provide the corresponding NI route. Instrument |
| Specified reportable events | GB RIDDOR 2013 covers specified injuries, diseases and dangerous occurrences; ordinary near misses are for internal learning. Instrument | NI RIDDOR 1997 is the separate NI reporting instrument; ordinary near misses are not automatically reportable. Instrument |
How does this decision transfer across sectors?
Culture, observation and leadership must lead to the control required by the actual task and harm route.
The manager names the people exposed, physical failure, strongest practicable option and hold point before interpreting a survey or observation trend. HSE organisational culture HSE introduction to human factors
| Sector | Task, people and harm route | Strongest feasible decision and check | Hold point |
|---|---|---|---|
| Construction | Concrete chaser omits extraction because the hose does not fit. | Fix tool compatibility and observe live capture before coaching. | Stop the cut until capture works. HSE chasing concrete and mortar |
| Logistics | Picker crosses a reversing lane to meet a target. | Redesign the pedestrian route before reinforcing safe crossing behaviour. | Hold movement if physical separation fails. HSE separating pedestrians and vehicles |
| Fuel depot | Observation cards rise while overfill protection is bypassed. | Track alarm health and test high-level shutdown separately from card counts. | Stop transfer on unproved protection. HSE large-tank high-level-switch safety alert |
How can readers practise this decision?
Use health and safety culture and behavioural change as a workplace case: identify the real task, the person who owns the control decision and the evidence that shows the control is working. State what would make work pause and who would authorise a safe restart.
Then trace each legal or medical claim to a direct source in Official links, checking whether it applies in Great Britain, Northern Ireland or both. Explain any uncertainty and the specialist advice needed rather than filling the gap with an assumed rule.
These are SHARE practice prompts, not an accredited syllabus or marking rule. For management-system context, see HSE management-system guidance.
What must each role demonstrate before acting?
Awareness and attendance are starting points; practical decisions, assessor, record and reassessment trigger depend on the role.
Observe the actual or simulated decision, check who assessed it, and retain evidence of a hold or corrected control. Leadership and coaching cannot compensate for a missing engineering measure. HSE behavioural safety and major hazards HSE chasing concrete and mortar HSE introduction to human factors
| Role | Learning and practical demonstration | Assessor and evidence | Reassess when |
|---|---|---|---|
| Concrete cutter | Demonstrate on-tool capture, residual RPE check and dust-escape stop point. | Supervisor observes actual cut and records authorisation. | Material, tool or extraction change. HSE chasing concrete and mortar HSE behavioural safety and major hazards |
| Peer observer | Ask what made the safe method difficult and document the control defect without blaming the worker. | Facilitator reviews observed conversation and record quality. | Biased cards or repeated unclosed defects. HSE behavioural safety approaches HSE behavioural safety and major hazards |
| Supervisor | Hold dusty work on failed extraction and verify a repaired method before restart. | Manager samples field hand-back and defect log. | Dust plume, symptom or method change. HSE chasing concrete and mortar HSE behavioural safety and major hazards |
| Designer or purchaser | Choose a no-chase or lower-dust method and test technical compatibility. | Technical lead signs selection and field trial. | Design or product specification change. HSE chasing concrete and mortar HSE behavioural safety and major hazards |
| Manager or safety specialist | Assess whether observation data reflects source control, trust and high-consequence risk. | Competent peer reviews indicators and action evidence. | Card counts improve while exposure persists. HSE behavioural safety and major hazards HSE behavioural safety and major hazards |
What warning signs show behavioural change is being handled badly?
Warning signs appear when programmes blame people, collect shallow data or ignore the system conditions behind behaviour.
| Warning sign | Why it is harmful | Action |
|---|---|---|
| Observation targets dominate | People chase card numbers instead of meaningful conversations. | Measure quality, learning and action closure. HSE behavioural safety and major hazards |
| Only frontline behaviour is observed | Management decisions and system causes are ignored. | Include leadership, supervision and resource behaviours. HSE behavioural safety and major hazards |
| Workers feel watched | Trust falls and behaviour becomes performative. | Co-design the process and protect psychological safety. HSE behavioural safety and major hazards |
| Major hazards are absent | Visible PPE improves while critical barriers degrade. | Include barrier health and high-consequence scenarios. HSE behavioural safety and major hazards |
| No feedback loop | People stop contributing because nothing changes. | Publish actions, owners and outcomes. HSE behavioural safety and major hazards |
| Everything is called culture | Specific causes are lost in vague language. | Define the behaviour, cause, control and evidence. HSE behavioural safety and major hazards |
What do the acronyms and key terms mean?
Acronyms should be understood before they are used in assessments, briefings, audits or learning answers.
| Acronym | Meaning | Plain-English use |
|---|---|---|
| DN1 | NEBOSH National Diploma DN1 learning context; SHARE practice material | Practice route connecting workplace controls with management evidence. |
| KPI | Key Performance Indicator | Metric used to track performance or control health. |
| BBS | Behaviour-Based Safety | Observation and feedback approach focused on defined behaviours. |
| OH&S | Occupational Health and Safety | Common term used in ISO 45001. |
| PDCA | Plan, Do, Check, Act | Management cycle used in HSG65 and management systems. |
| MOC | Management of Change | Formal control of changes that may affect risk. |
| ERICPD | Eliminate, Reduce, Isolate, Control, PPE, Discipline | Six-stage control planning aid, not a statute. HSE five-level hierarchy |
| RIDDOR | Reporting of Injuries, Diseases and Dangerous Occurrences Regulations | Separate GB and NI instruments cover specified reportable events; ordinary near misses are internal learning.Reporting of Injuries, Diseases and Dangerous Occurrences Regulations 2013 |
Unlock another resource
You have used this month’s two free downloads. Publish a post in your own words to unlock one more resource, or choose SHARE Individual for 10 downloads per month.
You decide whether to share. If you do, use the relevant platform disclosure tools and do not make claims you do not genuinely hold.