SHARE Expertise consultancy

Have us work with you.

External safety, health and risk support for organisations that need experience, capacity or an independent view. We help you understand the issue, choose the right support route and leave with useful actions, not paperwork for the sake of paperwork.

See a consultancy project

Fill gapsBring in experienced support when internal capacity is thin.
Solve problemsGet practical help for urgent or complex safety issues.
Build systemsCreate policies, registers, scopes and evidence that work.
Support projectsUse competent resource for higher-risk site activity.
Regulator supportHelp after inspections, notices or HSE contact so actions are clear, evidenced and properly closed out.

Consultancy needs analysis

Find where practical safety consultancy could help your business.

Review responsibilities, risk controls and the evidence behind them. Identify priorities for a focused project, audit or ongoing competent support.

Typical services

Support that fits the actual problem

Consultancy can be a one-off review, a project resource, a retained advisory role or a focused piece of technical work. SHARE can support safety audits, RAMS, DSE, COSHH, policies, BCP, ESG, CDM, fire risk, fire doors, DSEAR, accreditation, ISO and incident investigation.

  • Workplace safety audits, inspections and proactive monitoring.
  • Risk assessments, method statements, COSHH and DSE support.
  • Policy, procedure, business continuity and management-system writing.
  • CDM, construction phase plans, contractor assurance and project support.
  • Fire risk, fire door, fire strategy, DSEAR and specialist compliance reviews.
  • Accreditation support including SSIP, SafeContractor, Constructionline, PAS 91 and ISO routes.

"A good consultancy service should help you see the real issue, prioritise what matters and create a package that adds value to the organisation."

Start a consultancy enquiry

Common requests

Where consultancy adds value

These are the situations clients most often need support with, now presented as clear entry points into SHARE Expertise.

1

Inspection

Worksite audits, inspections and proactive monitoring of high-risk activities.

2

Advisory support

Retained or one-off insight from experienced safety professionals.

3

Policy and systems

Written policies, legal registers, responsibilities and practical management systems.

4

Specialist projects

On-site safety resource for shutdowns, extensions, contractor works, events and DSEAR.

How SHARE can help

Tell us where you need support.

You do not need every answer before getting in touch.

SHARE can help clarify responsibilities, review risk assessments and controls, develop usable policies and procedures, carry out focused audits and support improvement projects or retained advice. We will agree the work, outputs and competent specialist input needed before you commit.

What happens next: SHARE reviews your enquiry and contacts you to clarify the support, scope and next step.

We use your details to respond to your enquiry. Do not include identifiable health information or confidential employee records. We can agree an appropriate private route if needed. Read our privacy notice.

Leave your details and we will explain how we can assist.

Consultancy needs analysis

Find where practical safety consultancy could help your business.

An initial support-needs review, not an audit, legal opinion or certification of compliance. Answers cannot verify site conditions. Act on immediate danger through your existing emergency and management arrangements; do not wait for an enquiry response.

Background: HSE: getting competent help. SHARE's questions are an initial support check, not an official assessment tool.

Answer all ten questions. Select Not sure where evidence is missing.

Include leadership, managers, supervisors and escalation routes.

Consider internal capacity, specialist risks and cover during change.

Include routine work, maintenance, contractors and non-routine activity.

Consider observations, checks, monitoring and maintenance evidence.

Include access, document ownership and how teams are briefed.

Include supervisors, temporary workers and specialist tasks.

Include selection, scope, interfaces, permits and handovers.

Consider underlying causes and whether corrective actions are effective.

Include notices, overdue high-priority findings and unresolved serious risks.

Include audits, worker consultation, change and evidence of closure.

Your support-needs summary

Awaiting answers

  • Complete the questions to identify discussion points.

This review does not verify conditions or replace competent assessment. No identified gaps does not mean no support is needed.

How SHARE can assist

SHARE can help clarify responsibilities, review risk assessments and controls, develop usable policies and procedures, carry out focused audits and support improvement projects or retained advice. We will agree the work, outputs and competent specialist input needed before you commit.

Leave your details below to discuss the next step. If you complete the check, its current organisational review summary is included with your enquiry.

We use your details to respond to your enquiry. Do not include identifiable health information or confidential employee records. We can agree an appropriate private route if needed. Read our privacy notice.

Leave your details and we will explain how we can assist.

Consultancy enquiry

Got a project, requirement or question?

Tell SHARE what is happening, what support you need and whether this is urgent, planned, technical or ongoing.

Contact SHARE

Expertise in practice

From a site issue to a practical programme

Published examples of audits, technical support and ongoing consultancy, connected to the services available through SHARE.

Swipe or scroll to browse. Use the arrow keys when the cards are focused.

Guarded machine and inspection station in a UK engineering factory

Consultancy · Exposure risk & improvement

A three-week response to four HSE contravention notices

Scottish mechanical company

Starting point
4 contravention notices
Turnaround
3 weeks

Following an HSE inspection, a Scottish mechanical company requested urgent support to address four contravention notices and strengthen its management of exposure risks.

Work deliveredBaseline assessment of actual exposure using hand-arm vibration (HAV) monitoring equipment and personal noise dosimetry, informing role-based noise and vibration exposure profiles alongside chemical exposure assessment; management-system documents, risk assessments, new controls, training and follow-up audits.

Why it matteredAn urgent request became a structured improvement programme within three weeks. Exposure information was connected to practical controls, working documents and team learning. SHARE reports that HSE's requirements were satisfied and the contravention matters resolved, with follow-up audits supporting the new ways of working.

Read the original case study · SHARE delivery account
Welding booth with local extraction and protective screening

Consultancy · Risk management

A practical reset for fabrication-site risk management

UK fabrication business

Site workforce
60 employees
Programme
6 months

A fabrication company commissioned a business and site review to update its approach to risk ownership, records and operational controls.

Work deliveredWalkthroughs, staff discussions, a risk-register review and management-system updates focused on the work being done.

Why it matteredAn external view helped turn day-to-day concerns into identifiable improvement areas. Updated systems and clearer risk ownership connected management records with what people actually did on site.

Read the original case study · 2020 Safety Training
Guarded recycling facility with separated pedestrian access in the UK

Auditing · Multi-site assurance

A joined-up audit programme for energy sites

UK waste-to-energy and hydroelectric operator

Scope
Multiple UK sites
Programme
3 months

An energy provider needed a consistent view of safety across facilities with different operating risks, from waste processing to remote hydroelectric installations.

Work deliveredSite audits benchmarked against the central risk register and internal standards, connecting local findings to organisational oversight.

Why it matteredLocal findings were brought into a joined-up view of the business. This gave managers a clearer basis for prioritising improvements while keeping the different risks of each location visible.

Read the original case study · 2020 Safety Training
Closed pipework and vessels in a UK chemical processing plant

SIRPS · Technical training & consultancy

Consistent isolation practice across four shifts

UK polymer manufacturing plant

Coverage
4 operational shifts
Programme
2 weeks

An initial review of isolation procedures and permit systems identified differences between shifts. Engineering and safety teams helped shape a site-specific SIRPS programme.

Work deliveredProcedure review, technician observation, tailored learning and shift-based delivery using the plant's own operating scenarios.

Why it matteredThe review made differences between shifts visible. Site-specific learning connected procedures to the plant's equipment and operating scenarios, giving teams a shared basis for more consistent isolation practice.

Read the original case study · 2020 Safety Training
UK building site with a segregated walkway and workers reviewing the site

Retained support · Construction

Safety support that grows with a construction business

Small construction company

Workforce
20 employees
Support model
Retained & call-off

A construction company used regular consultancy and additional call-off support to manage safety as the business developed.

Work deliveredOngoing advice, working documents and help with pre-qualification submissions and client assurance.

Why it matteredRegular access to experienced advice gave a growing business somewhere to test decisions, improve working documents and prepare client assurance information as new demands arose.

Read the original case study · 2020 Safety Training
Fire extinguisher and clear emergency route in a UK workplace

Facilities · Fire safety & retained support

Coordinating safety across a commercial property portfolio

UK office facilities management company

Portfolio
5 properties
Occupancy
75+ tenanted offices

A facilities manager brought property risks and records into one programme, including fire safety, maintenance and contractor responsibilities.

Work deliveredProperty reviews, updated fire assessments and policies, a central risk register and clearer tenant emergency information.

Why it matteredBringing property reviews, fire information and records together clarified the areas needing attention and connected building-specific arrangements with tenant and contractor responsibilities.

Read the original case study · 2020 Safety Training

6 examples

Project sources are credited on each card. Sector illustrations show the work setting, rather than the client project.