SHARE Knowledge Hub
Nasal cancer
Nasal and sinus cancer can be linked to workplace exposure to carcinogenic dusts and chemicals. Control exposure at source, act on persistent symptoms and use the correct Great Britain or Northern Ireland duties.
Understanding Nasal cancer
Nasal and sinus cancer can be linked to workplace exposure to carcinogenic dusts and chemicals. Control exposure at source, act on persistent symptoms and use the correct Great Britain or Northern Ireland duties.
Why this matters at work
Use precise language: 'work exposure is a recognized risk factor', 'there is evidence of exposure', or 'causation requires specialist assessment'. Avoid both 'the workplace caused this cancer' and 'it cannot be work-related because the current WEL is met' unless a competent case-specific authority supports the conclusion.
Visible dust and blow-down reveal release and secondary exposure that an examination certificate cannot rule out. A sample from light softwood work does not represent busy hardwood sanding, mixed dust or cleanup. Include fixed and hand-held tools, capture position, filters and nearby people. Hardwood-dust exposure is relevant to nasal-cancer prevention, while other wood dust also has important respiratory effects. Prevention is required now; there is no need to wait for a cancer case or prove an individual causal link before improving known controls.
How organisations manage this in practice
Follow a practical hierarchy: avoid or substitute a dusty process, reduce generation, enclose or segregate, capture at source, maintain and verify controls, and provide appropriate RPE for residual risk. Training, supervision and housekeeping maintain the system but cannot compensate for a process that continually releases uncontrolled dust.
Include worker observations and near misses. A falling symptom-report rate could reflect better control or fear of speaking up; check the reporting culture before declaring success. Health-surveillance findings should feed control review while protecting medical privacy.
Implement prevention in order: eliminate avoidable dust, substitute or change method where suitable, enclose and segregate, capture each source, establish dust-safe cleaning and maintenance, then specify RPE for residual work. Train workers on the actual control and stop rule and verify its use at peak demand.
Apply all relevant COSHH good-control principles, not just a numerical sample result. HSE states exposure to carcinogens, mutagens and asthmagens should be as low as reasonably practicable. A measurement below a WEL does not prove that feasible source reduction is unnecessary.
Audit the full task chain, not just the existence of a COSHH form. Select high-release operations and trace procurement, machine setup, normal capture, cleaning, maintenance, sampling, worker instruction and defect closure. Observe the process at representative throughput.
What is nasal cancer and how can work contribute?
Nasal and sinus cancer develops in the nasal cavity or the air spaces around it. Some workplace dusts and chemicals increase risk, so prevention starts with controlling exposure and recognising symptoms that need medical assessment.
Control exposure at work · get persistent symptoms checked
Read the complete visual as text
- Nasal cavity: Space behind the nose: contaminated air can bring agents into contact with the nasal lining.
- Sinuses: Nearby air-filled spaces. Sinonasal refers to the nose and sinus region; this schematic is not diagnosis.
- Independent actions: Control workplace exposure and seek clinical advice about persistent symptoms. A diagnosis does not by itself establish an individual occupational cause.
Terms used in the work decisions below: Health and Safety Executive (HSE); Health and Safety Executive for Northern Ireland (HSENI); Great Britain (GB); Northern Ireland (NI); HSE workplace exposure limits publication (EH40). Apply each source within its stated location and subject.
The nasal cavity is the space behind the nose; the sinuses are nearby air-filled spaces. “Sinonasal” covers both. Cancer involves abnormal cells growing out of control. It is different from a short episode of dust irritation or hay fever, although early symptoms can look similar. This page concerns occupational prevention and support, not diagnosis or treatment. nidirect nasal and sinus cancer guidance.
Breathing contaminated air brings harmful agents into contact with the nose and respiratory tract. Repeated exposure can contribute to disease that becomes apparent years later. A worker feeling well today does not prove that yesterday’s controls were adequate. Equally, a cancer diagnosis alone does not establish which job or exposure caused it; that needs clinical and occupational evidence.
Northern Ireland government clinical guidance lists long workplace exposure to wood dust, leather dust, nickel, chromium and formaldehyde among risk factors. HSE identifies hardwood dust as a cause of nasal cancer. Investigate the actual material and process; do not infer an individual cause from a diagnosis.
- Identify the task
Name the wood, leather or other material and who breathes dust during normal work and cleaning.
- Control at source
Use the assessed process change and effective capture before relying on respiratory protection.
- Check the work
Observe capture in the real task and keep symptoms and exposure evidence in their proper records.
- Hold and refer
Stop uncontrolled dust; refer persistent one-sided nasal symptoms for medical assessment.
Decision basis: HSE wood dust. Adapt the steps to the assessed task and location. Additional authorities: nidirect nasal and sinus cancer guidance; nidirect nasal and sinus cancer guidance; HSE COSHH control measures.
Capture dust where the cutting happens
Enclosure and extraction need to control the dust route from the cutting point. A connected-looking hose is only one part of the evidence; persistent symptoms need their own clinical assessment.

Cutting source
Identify the material and the cutting, sanding and cleaning tasks. The stationary sketch illustrates a source, rather than a safe operating method.
Enclosure
Check the assessed guard and enclosure arrangement for the actual machine; do not infer acceptable access distances from this drawing.
Capture path
Trace the hood, connection, duct and extraction system. A disconnected or damaged hose interrupts that path and requires the task to be held.
Breathing zone
Consider where dust travels relative to people, including during cleaning and maintenance. Visible dust alone cannot measure exposure.
Check airflow evidence
Use the established airflow indication and relevant examination, maintenance and exposure evidence. Appearance does not establish capture performance.
Defect means hold
Prevent use of the defective arrangement and obtain competent machinery/LEV correction and verification before restart. Keep medical information private.
Unusual or persistent nasal symptoms need GP assessment without waiting for proof of a work cause. The image supplies no tumour map, exposure limit or machine approval.
Which symptoms need medical advice?
Seek GP advice for unusual or persistent nasal symptoms, especially one-sided blockage, repeated nosebleeds or blood-stained mucus. These signs often have other causes but need assessment.
Reduced smell, continuing facial pain or numbness, a facial or neck lump and new eye symptoms can also matter. Northern Ireland government guidance advises GP assessment for unusual or persistent symptoms. Explain the change and relevant work history.
A supervisor should help the person access care and review any present exposure problem without trying to diagnose cancer. Keep medical details private. Severe breathing difficulty, collapse or another immediate medical emergency requires the site emergency response and 999; treat the acute event rather than debating its cause. nidirect nasal and sinus cancer guidance.
Where should a workplace assessment start?
Identify the material, the dust or fume the process creates, who can breathe it and how the controls perform during the real task. Include cleaning and maintenance, not just normal production.
Walk the process with operators: receiving material, cutting or machining, finishing, moving waste and emptying collectors. Ask what changes when the workpiece, tool, batch size or machine combination changes. Look beyond the operator to cleaners, maintainers, contractors and people passing through shared areas. A supplier’s safety data sheet can inform an assessment, but does not replace it and may not describe process-generated dust. HSE Working with substances hazardous to health; HSENI COSHH.
For hardwood, softwood and composite materials, establish what is actually being cut. For metal processes, identify the chemical form and task before selecting a limit or respirator. If material identity or a coating is unknown, hold the proposed dusty work until the supervisor obtains competent advice. Do not use this wood-dust example as a nickel-process method.
How can the hierarchy of controls reduce occupational exposure to nasal carcinogens?
First avoid the exposure-producing task where practicable, then control dust at source. Respiratory protection supports an effective control system; it does not make failed extraction acceptable.
Consider buying accurately sized components or redesigning the assembly to reduce site cutting and sanding. Check that a substitute does not introduce another serious hazard. Where processing remains necessary, use enclosure and extraction designed for the actual machine, material and combinations of equipment in use. Ordinary room ventilation is not a substitute for capture at the source. These are practical applications of COSHH’s prevention and control approach. HSE COSHH control measures.
Before work, check the extraction connection, hood position, airflow indication and waste collection arrangements against the system instructions. During work, watch for loss of capture, escaped dust and changes in airflow. Stop the dust-producing task when a relied-on control fails and have the cause corrected before authorised restart. Afterwards, use suitable vacuum cleaning; HSE specifies at least dust Class M for woodworking. Avoid dry sweeping and compressed-air cleaning, which put settled dust back into the air. HSE Wood dust controlling the risks WIS23.
Select respiratory protective equipment (RPE) for the assessed exposure, task, wearer and other protective equipment. Tight-fitting facepieces need fit testing for the selected make, model, type and size, plus a fit check each time they are worn. Facial hair at the seal prevents a reliable fit; obtain a suitable alternative where necessary. Follow manufacturer instructions for use, maintenance and replacement rather than inventing a universal mask-change interval. HSE fit testing basics.
Use the HSE hierarchy to remove or substitute the hazard where feasible, then use engineering separation, administrative measures and PPE for residual exposure. Keep each selected control effective through inspection, maintenance and worker feedback. The task-specific table below records the decision and stop point.
Health surveillance may detect effects and test whether the prevention programme is working; it cannot replace dust control at source.
SHARE’s ERICPD prompt makes these dust decisions explicit: Eliminate an unnecessary cutting or sanding step through accurate sizing; Reduce dust through a suitable alternative material or method; Isolate the source through enclosure and engineered capture; Control residual spread through the assessed work and vacuum-cleaning method; use suitable fit-tested RPE and other PPE where the assessment requires them; and sustain controls through Discipline, meaning maintenance, observation and learning. Enclosure and capture belong within HSE’s engineering level. This cross-map is a practical teaching prompt, not an extra statutory ladder. HSE five-level hierarchy.
For the worked wood-dust task, HSE WIS23 recommends residual RPE with an assigned protection factor (APF) of at least 20. A suitable FFP3 can meet that protection requirement, but the assessor must check the actual task, wearer, fit and other equipment. Prolonged wear, high work rate or inability to achieve a seal may require another suitable type, such as an appropriately selected powered option. Fit testing applies to tight-fitting facepieces. This wood-dust starting specification must not be transferred to nickel vapour or oxygen-deficient work. See HSE WIS23, revision 3, pages 6–8.
Read the practical categories separately: elimination removes the hazardous task/source; substitution replaces it with a suitable safer alternative; physical separation, containment and capture are engineering decisions. Duration/access/briefing are administrative measures, PPE covers residual exposure, and continued inspection, maintenance and verified action closure sustain the controls. Exposure monitoring or dosimetry measures exposure rather than protecting a person. The detailed text and records below distinguish these decisions; an overview illustration is not task authorisation.
How do wood dust limits change a decision?
The applicable workplace exposure limit is a ceiling on the time-weighted airborne concentration, not a target and not a guarantee of freedom from cancer. Use the correct dust fraction, averaging period and material identity.
The figures below are HSE’s inhalable wood-dust limits for Great Britain. HSENI’s current COSHH guidance states that the EH40 list is legally binding under COSHH NI. Check the current regulator position when using the figures in a Northern Ireland assessment. All figures are milligrams per cubic metre, averaged over eight hours. HSE EH40 workplace exposure limits; HSENI COSHH.
| Material in airborne dust | 8-hour time-weighted limit | What the number means |
|---|---|---|
| Hardwood dust | 3 mg/m³ | Use the hardwood limit; control must also be as low as reasonably practicable. |
| Softwood dust only | 5 mg/m³ | The higher number does not make softwood dust harmless; asthma and other effects still need control. |
| Hardwood mixed with other wood dust | 3 mg/m³ for all wood dust in the mixture | Do not compare each wood component separately with its own limit. |
Worked decision: a GB joinery shop processes oak and softwood in the same area. A competent personal-sampling report gives 3.4 mg/m³ as the representative eight-hour inhalable mixed wood-dust exposure. Compare 3.4 with 3, not with the softwood-only value of 5: the limit is exceeded. The manager must act to restore adequate control and prevent continued uncontrolled exposure. A result of 2.6 would be below the limit, but would still require good control practice and further reasonably practicable exposure reduction. These are illustrative results, not permission to calculate a “safe” unprotected work time.
A spot-reading room sensor, visible dust or a clean-looking workshop cannot alone establish compliance. Ask an occupational hygienist to select suitable sampling, judge representativeness and explain uncertainty. Different contaminants need their own assessment.
What checks and health surveillance are useful?
Check the exposure controls and arrange appropriate health surveillance for the identified risk. A health questionnaire or lung-function test does not certify that someone is free of nasal cancer.
Operators need meaningful checks before use and a way to report defects. Managers must maintain extraction and arrange competent thorough examination and testing. For usual woodworking LEV, the legal maximum interval is 14 months; shorter intervals may be needed and some processes have specific exceptions. This does not replace day-to-day checks or manufacturer maintenance. HSE wood dust; HSENI COSHH.
HSE’s wood-dust surveillance advice addresses respiratory effects such as occupational asthma and recommends occupational-health input. The competent clinician should decide a suitable programme and response to findings. Do not convert asthma surveillance into an invented programme of routine nasal endoscopy, scans or a fixed “cancer screening” interval. Prompt symptom assessment remains a separate route. HSE COSHH health surveillance.
The employer’s health record records surveillance outcomes and fitness for relevant exposure; confidential clinical notes belong with the health professional. HSE states a 40-year retention period for COSHH health records in GB. Retain applicable COSHH NI health records for at least 40 years and keep operational exposure histories retrievable without putting diagnoses into an open risk register. HSE health surveillance record keeping.
For Northern Ireland, retain applicable COSHH health records for at least 40 years. The employer keeps the exposure/surveillance health record; confidential clinical notes remain with the clinical provider under its separate arrangements. Identify the record owner and retrieval arrangements when employment or the business changes. HSENI COSHH brief guide
Which duties apply in Great Britain and Northern Ireland?
GB workplaces use COSHH 2002; Northern Ireland workplaces use COSHH NI 2003. Both require hazardous-substance risks to be assessed and exposure prevented or adequately controlled. Use the law and reporting route for the workplace jurisdiction.
The assessment needs to drive effective measures, information, instruction, training, maintenance and, where required, monitoring and health surveillance. Carcinogen control demands more than simply staying below a numerical limit. Workers must use the controls provided and report problems; managers must resource and assure those controls. HSE COSHH control measures; HSENI COSHH.
In GB, RIDDOR 2013 covers diagnosed occupational cancers where an established causal link and significant occupational risk meet the criteria. HSE gives nasal or sinus cancer with occupational wood-dust exposure as an example, and states that the person’s current job must involve exposure to the relevant hazard. Symptoms alone are not a reportable cancer diagnosis. Obtain competent advice on the diagnosis, exposure and responsible person. HSE reportable occupational cancers.
Northern Ireland retains RIDDOR NI 1997 and its own disease and activity criteria. The responsible person should check the HSENI disease-reporting guidance for the diagnosed condition and work; do not transplant the GB test. Historical exposures still deserve clinical assessment and workplace learning even where a particular reporting duty does not apply. HSENI report an incident.
This is workplace-use guidance. Chemical classification, supply information and product conformity duties are separate; an equipment mark or safety data sheet does not approve the real work method. The example’s supervisor release and hand-back checks are SHARE good-practice arrangements, not a claim that legislation requires a permit for every woodworking task.
For NI disease reporting, match the diagnosis to the specified activity rather than importing the GB test. Entry 44 covers cancer of the nasal cavity or associated air sinuses with work in wooden-furniture manufacture; footwear manufacture or repair involving leather or fibreboard; or manufacture of nickel and its compounds involving production of nickel by decomposition of a gaseous nickel compound. Check the exact disease/activity wording and reporting conditions in HSENI RIDDOR booklet, disease entry 44. Exposure to any wood, leather or nickel is not by itself that match.
What does each role need to know and demonstrate?
Competence means being able to apply the controls for the actual task and recognise when the task exceeds your knowledge or authority. Attendance at a short course alone is not evidence that someone can operate, test or maintain a system safely.
| Role | Practical responsibility | Assessor, record and recheck |
|---|---|---|
| Worker or representative | Use the controls, raise defects and seek medical advice for persistent symptoms. Explain actual work conditions during reviews. | Supervisor observes a task and report; record the control briefing. Recheck after a new material, symptom or failed control. |
| Supervisor | Confirm prerequisites, stop uncontrolled work and manage changes, contractors and restart. | Operations manager observes start/stop and contractor hand-back; record the hold and release. Recheck after a method or shift change. |
| Purchaser or manager | Specify lower-exposure work and suitable equipment; fund competent assessment, control maintenance and occupational health. | Senior manager checks the purchase specification and exposure-control evidence; record acceptance and funding. Recheck after new plant or a recurring defect. |
| Maintainer and competent adviser | Verify extraction performance and safe maintenance; interpret exposure evidence and identify when specialist input is needed. | Engineering lead checks extraction tests; a competent hygienist checks exposure interpretation. Keep test and specialist review records; recheck after repair, changed process or concern. |
Use a practical demonstration: ask the operator to locate the extraction check, explain its acceptable indication, describe a defect response and show the cleaning method. Ask supervisors how they would handle an unknown material or an added sander. Use specialists for occupational hygiene, clinical decisions and extraction design where the organisation lacks that capability. No universal nasal-cancer training certificate or refresher expiry is specified here. HSE Managing for health and safety.
How should managers record and act on assurance findings?
Keep a short record of the exposure scenario, controls, accountable owner and evidence of effectiveness. Act on failed controls without waiting for illness to appear.
For the BuildOut example, record “people inhale hardwood dust during trimming, sanding, cleaning or collector maintenance”, then identify the extraction, material checks, access arrangements and residual RPE relied upon. Link current assessments, commissioning information, maintenance and examination records, sampling results and corrective actions. A green status should have evidence behind it, not simply a scheduled inspection date.
Review after a new material, machine or extraction change; a defect or uncontrolled release; a relevant health concern; or information showing the assessment is no longer reliable. Track whether repair actually restored capture and whether work stayed within the assessed configuration. HSG65’s Plan, Do, Check, Act approach supports this management cycle; it is guidance rather than a separate legal duty. HSE Managing for health and safety.
Support a worker receiving treatment through confidential occupational-health advice and agreed work adjustments. Ask what work support is needed rather than asking supervisors to access clinical records. Keep individual health data access-controlled; a shared dashboard should show control performance and action ownership.
Where can readers go next?
Follow the exposure or support question into the relevant SHARE topic, then return to the actual workplace assessment and clinical advice where needed.
- Wood dust — woodworking exposure control.
- Nickel diseases — substance-specific health risks.
- Health surveillance and medical records — scheme and confidentiality principles.
- Cancer and work — support during treatment and return to work.
What changes when a second machine joins the extraction system?
The original extraction result may not represent the new combination; verify capture for the machines that will actually run together.
Consider a small joinery workshop that adds an oak sanding station to an existing saw extraction system. The buyer checks the machine's extraction needs, while the competent ventilation designer checks the combined airflow demand and layout. A spare duct connection does not prove that the fan, collector and branches can support simultaneous use. See HSE wood dust.
At acceptance, observe the intended operating combinations and compare the relevant performance evidence with the design. Check hood position, connections, airflow indicators, collection and the worker's operating method. The assessment must cover sanding and cleaning as well as the normal cut; a sample from the saw task alone cannot answer every exposure question. See HSE COSHH control measures.
If the new station loses capture when the saw starts, hold that combination and resolve the capacity or design problem. Buying pre-sized material or outsourcing the dust-producing step may reduce exposure at source, but assess the alternative task and its hazards. The manager records the rejected combination, the remedy and the evidence needed before release. These are illustrative procurement and commissioning decisions, not a ventilation design specification. See HSE COSHH control measures.
Decision basis: HSE wood dust. HSE COSHH control measures. The scenario and suggested records are illustrative; apply the source within its stated jurisdiction and the assessed work.
How do health findings and control findings fit together?
Clinical referral protects the person; engineering and exposure review address the work. Neither decision replaces the other.
A worker reports persistent one-sided nasal symptoms between scheduled respiratory checks. Follow the symptom advice and arrange medical assessment rather than waiting for the next surveillance appointment. The workplace should describe relevant dust tasks to the clinician without attempting to diagnose cancer from a symptom or exposure record. See HSE COSHH health surveillance. Additional decision support: nidirect nasal and sinus cancer guidance.
Respiratory health surveillance for wood-dust-related asthma is not a nasal-cancer screening programme. Occupational health advises on appropriate surveillance and individual work advice. Managers should review the source controls, cleaning and similar workers' exposure even if a diagnosis has not been established, while protecting confidential clinical information. See nidirect nasal and sinus cancer guidance. Additional decision support: HSE wood dust. HSE COSHH health surveillance.
Decision basis: HSE COSHH health surveillance. nidirect nasal and sinus cancer guidance. The scenario and suggested records are illustrative; apply the source within its stated jurisdiction and the assessed work.
Can the learner challenge a misleading reassuring result?
A measurement below a limit, a clean floor or a recent test certificate does not alone show that the actual dust-producing work is adequately controlled.
Learning check: a supervisor says that softwood is normally used, so the softer numerical benchmark can cover a day of oak work. The learner should identify the actual hardwood and mixed-dust rule, its units and averaging period from the relevant source. Select the jurisdiction before applying the exposure value and retain the requirement to reduce exposure through effective controls. See HSE wood dust.
Learning check: the cleaner proposes compressed air because it removes visible dust quickly. The correct response is to prevent dust being re-suspended and use the assessed suitable vacuum method. A visually cleaner surface can coincide with more airborne exposure. Show the actual cleaning technique during practical assessment. See HSENI COSHH.
Ask the manager to identify who accepts an extraction change and how effectiveness is checked after maintenance or a changed production pattern. A date on a test certificate is one evidence item; its scope, findings and continuing performance must match the installed system and use. See HSENI COSHH.
Decision basis: HSE wood dust. HSENI COSHH. The scenario and suggested records are illustrative; apply the source within its stated jurisdiction and the assessed work.
Which acronyms and terms matter?
These terms help distinguish a legal exposure limit from evidence that a real control works.
| Term | Full form or meaning | Practical use |
|---|---|---|
| COSHH | Control of Substances Hazardous to Health | Separate GB and NI regulations govern assessment and control. |
| LEV | Local exhaust ventilation | Captures dust near its source; performance must be checked. |
| RPE | Respiratory protective equipment | Residual protection selected and fit-tested where needed. |
| WEL | Workplace exposure limit | A maximum exposure value, not a safe target. |
| TWA | Time-weighted average | Exposure averaged over the stated reference period. |
| ALARP | As low as reasonably practicable | A reduction principle used in the exposure discussion. |
| Carcinogen | An agent capable of causing cancer | Control exposure; do not infer an individual's cause from a diagnosis alone. |
| Latency | Delay between exposure and disease | Current good health cannot validate historic controls. |
| PPE | Personal protective equipment | Residual protection after stronger dust controls. |
| HSE | Health and Safety Executive | Great Britain workplace regulator; use its guidance within scope. |
| HSENI | Health and Safety Executive for Northern Ireland | Northern Ireland workplace regulator; NI duties have separate instruments. |
| GB | Great Britain | England, Scotland and Wales; distinguish the NI legal route. |
| NI | Northern Ireland | Use the Northern Ireland legislation and regulator route. |
| EH40 | HSE workplace exposure limits publication | Read the actual substance, units, averaging period and notations. |
| RIDDOR | Reporting of Injuries, Diseases and Dangerous Occurrences Regulations | Check the applicable GB or NI legal definition and reporting route. |
| ERICPD | Eliminate; Reduce; Isolate; Control; PPE; Discipline | SHARE planning prompt; Discipline means maintaining controls, not blame. |
Page ownership and review status
Content owner: SHARE Knowledge Hub editorial team.