SHARE Knowledge Hub
Nickel-related occupational disease
Nickel metal and nickel compounds can cause work-related skin and respiratory disease; inhaled nickel compounds are also linked to lung and nasal cancer. The risk depends on chemical form, process and route of exposure. Identify the material, control dust or mist at source, protect skin, and act early on symptoms while a clinician and occupational specialist assess the cause.
Understanding Nickel-related occupational disease
Nickel metal and nickel compounds can cause work-related skin and respiratory disease; inhaled nickel compounds are also linked to lung and nasal cancer. The risk depends on chemical form, process and route of exposure. Identify the material, control dust or mist at source, protect skin, and act early on symptoms while a clinician and occupational specialist assess the cause.
Why this matters at work
Record the exact material, classification, physical form and task that changes it into dust, fume or mist. Use supplier information alongside process knowledge; a finished article and a heated or powdered form need different exposure reasoning. Ask for specialist advice if identity is uncertain. Avoid transferring cancer, sensitisation or carbonyl-poisoning claims from one form to every product containing nickel. Elemental nickel, soluble salts, oxides, sulphides, alloys and nickel carbonyl differ in behaviour and health evidence. Solubility, physical form and the process influence the route and significance of exposure. A nickel-plating mist, a refining dust and an intact finished component are therefore not equivalent exposure situations. UKHSA’s information distinguishes form and route in discussing effects. Separate contact sensitisation, respiratory disease and the special acute hazards of carbonyl chemistry rather than describing one generic nickel disease or limit.
Set surveillance from the actual residual exposure and the disease or early effect being sought, with competent OH input. Explain reporting and referral routes and include relevant skin or respiratory risks. Keep surveillance findings connected to control review, without sending confidential clinical results to managers. A nickel label alone does not determine a universal test, interval or fitness outcome, and silica-specific medical guidance cannot supply that evidence. Surveillance is designed around an identifiable disease or early effect, exposure risk and a valid detection route. Skin and respiratory surveillance can be relevant where nickel tasks leave residual sensitisation risk. It is not a general health-screening requirement for everyone near an alloy article. Define population, baseline, follow-up and referral with OH and consultation. Keep the detection programme linked to preventive action and avoid importing an X-ray protocol from a silica document merely because a local file has a generic surveillance title.
How organisations manage this in practice
Select against the whole formulation and operating conditions, including other acids, alkalis or solvents. Obtain task-relevant compatibility data and define inspection, replacement, removal and cleaning arrangements. Observe actual use, especially cuffs and contamination inside gloves. Record the chosen product and its limitations so procurement cannot substitute an apparently similar glove without review. PPE complements containment, splash prevention and hygiene rather than replacing them.
Pregnancy or reproductive-health concerns require confidential, individual assessment under the relevant employment and health-and-safety rules. The strongest control remains preventing exposure for everyone; moving only one worker while leaving an uncontrolled source for others is not adequate prevention.
Include temporary and maintenance workers when their exposure meets the criteria. A subcontracting boundary does not remove the need to coordinate who arranges checks and who receives control feedback. Keep clinical information confidential while providing the employer with functional and exposure-control conclusions.
Separate mist control from skin-contact control
Identify the nickel compound and process before selecting controls. Capturing mist from a plating task does not by itself prevent contaminated-surface or skin exposure.

Identify form
Confirm the actual nickel form, solution, process and current safety information. Hazards differ between forms and tasks.
Mist route
Assess enclosure and capture at the point of release, including maintenance. Check the worker position and relevant exposure evidence.
Skin contact
Trace splashes, contaminated fittings, gloves and clothing. Prevent contact and assess glove suitability for the actual mixture and task.
Enclose and capture
Maintain the assessed enclosure and extraction together; a hood’s presence is not performance evidence.
Failed extraction means hold
A damaged duct or failed capture indication requires the affected task to be held and competently corrected. Keep contamination out of the clean area.
Clinical route separate
Use the appropriate confidential health route for symptoms or sensitisation concerns. Nickel carbonyl is a separate specialist process/emergency hazard; it is not implied by this plating-bath scene.
Do not infer chemical identity, exposure safety or a diagnosis from the photograph or bath schematic. Follow the assessed incident response for the actual material.
What health effects and exposure routes matter?
Skin contact can sensitise a person and lead to allergic contact dermatitis; inhalation can irritate the airways, contribute to occupational asthma, and for some compounds create long-term cancer risk.
What health effects and exposure routes matter?
Read the complete visual as text
- Skin contact can sensitise a person and lead to…: Skin contact can sensitise a person and lead to allergic contact dermatitis; inhalation can irritate the airways, contribute to occupational asthma, and for some compounds create long-term cancer risk.
- Nickel health effects depend on chemical form and route.…: Nickel health effects depend on chemical form and route. UKHSA and HSE describe skin sensitisation, respiratory effects and cancer concerns for particular nickel compounds; identify the actual substance and process rather than assigning one risk to every form.
- Nickel carbonyl is a distinct, acutely hazardous compound in…: Nickel carbonyl is a distinct, acutely hazardous compound in relevant processes; exposure may have delayed severe lung effects after an apparently quieter interval. Treat a suspected release as an emergency under the site’s substance-specific plan, not as routine dermatitis or asthma follow-up. UKHSA nickel toxicology .
Nickel health effects depend on chemical form and route. UKHSA and HSE describe skin sensitisation, respiratory effects and cancer concerns for particular nickel compounds; identify the actual substance and process rather than assigning one risk to every form.
Nickel carbonyl is a distinct, acutely hazardous compound in relevant processes; exposure may have delayed severe lung effects after an apparently quieter interval. Treat a suspected release as an emergency under the site’s substance-specific plan, not as routine dermatitis or asthma follow-up. UKHSA nickel toxicology.
Which symptoms should prompt action?
Report new or worsening hand eczema, work-related wheeze or chest tightness, persistent nasal symptoms, or a suspected acute chemical exposure promptly.
Dermatitis may show as itchy, red, cracked or blistered skin. Asthma symptoms can include wheeze, cough, chest tightness and breathlessness that vary with work; symptoms may persist or worsen after sensitisation. Persistent one-sided nasal symptoms or repeated bleeding need a GP assessment. No symptom alone proves nickel causation, and a normal health questionnaire does not exclude future disease. Tell a clinician the material, process, dates and controls, including past work. Sources: HSE Nickel and you. Also see nidirect nasal and sinus cancer.
Severe breathing difficulty, collapse or suspected nickel-carbonyl exposure calls for the site emergency response and urgent clinical care. Supervisors should isolate the exposure source and protect others without trying to make a diagnosis.
Use the companion skin health and occupational dermatitis guide and occupational asthma guide for the next prevention and referral questions; do not infer either diagnosis from the task description.
How should a nickel task be assessed?
Identify the exact nickel substance and process, then trace skin contact, dust, fume or mist to each exposed person under normal work, cleaning and maintenance.
Inspect the supplier information and process history, but do not assume a safety data sheet describes all process-generated fume. A plating bath may produce inhalable mist during agitation; welding can generate a mixture whose composition depends on base metal and consumables. Observe real tasks, collect suitable exposure evidence where needed, and involve an occupational hygienist when the form, sampling or control performance is uncertain. Include contractors emptying collectors, cleaning tanks or repairing extraction. Sources: HSE EH40 workplace exposure limits, HSENI EH40 workplace exposure limits.
A workplace exposure limit is a legally enforceable airborne limit averaged over its stated reference period for the stated substance form and particle fraction; it is not a safe target or a substitute for control. EH40 lists separate eight-hour entries for water-soluble nickel compounds as Ni (0.1 mg/m³) and nickel or water-insoluble compounds as Ni (0.5 mg/m³). Those values are examples of why the form must be known, not exposure targets or a substitute for sampling and control. HSENI approves EH40 for use with COSHH NI 2003. Do not apply a “nickel” number to an unidentified compound or mixed fume. HSE EH40 nickel entries. HSENI EH40 approval.
The two nickel entries above exclude tetracarbonylnickel (nickel carbonyl). Identify its separate entry and retain the separate acute/emergency assessment route; neither a generic nickel result nor a momentary reading can establish the relevant time-weighted exposure.
How can the hierarchy of controls reduce nickel exposure and occupational health risks?
Use process and engineering changes to prevent or contain exposure; gloves and respiratory protection support, but do not replace, effective source control.
What controls should come before gloves and respirators? — part 1 of 2
Read the complete visual as text
- Use process and engineering changes to prevent or contain…: Use process and engineering changes to prevent or contain exposure; gloves and respiratory protection support, but do not replace, effective source control.
- Use the HSE hierarchy to remove or substitute the…: Use the HSE hierarchy to remove or substitute the hazard where feasible, then use engineering separation, administrative measures and PPE for residual exposure. Keep each selected control effective through inspection, maintenance and worker feedback. The task-specific table below records the decision and stop point.
- Select chemical-resistant gloves for the actual nickel compound and…: Select chemical-resistant gloves for the actual nickel compound and task, with a change and skin-care plan; an unsuitable glove can trap contamination. Respiratory protective equipment (RPE) must be selected, fit-tested if tight-fitting, maintained and worn correctly. Stop the affected task if relied-on containment, extraction or protection fails. Do not treat skin cream or a reminder poster as the main control.
What controls should come before gloves and respirators? — part 2 of 2
Read the complete visual as text
- HSE places elimination and substitution before engineering controls, administrative…: HSE places elimination and substitution before engineering controls, administrative measures and PPE. Apply that order to the task, then check whether the selected controls work in use.
- Keep physical controls effective through inspection, maintenance and action…: Keep physical controls effective through inspection, maintenance and action when a check fails. A reminder or retraining alone cannot compensate for a leaking transfer, failed extraction or dangerous atmosphere.
- SHARE ERICPD is a memory aid for choosing stronger…: SHARE ERICPD is a memory aid for choosing stronger controls: Eliminate the hazardous step where feasible; Reduce through substitution or a lower-emission method; Isolate with enclosure or closed transfer; Control exposure through engineering and suitable work arrangements; use Personal protection for assessed residual exposure; and maintain Discipline through checks, supervision and prompt correction. The first five ideas map to HSE’s elimination, substitution, engineering, administrative and PPE hierarchy. Discipline supports effective use and review of every level; it is not a separate higher-order control or permission to depend on behaviour when a stronger physical control is feasible. See HSE five-level control hierarchy .
Use the HSE hierarchy to remove or substitute the hazard where feasible, then use engineering separation, administrative measures and PPE for residual exposure. Keep each selected control effective through inspection, maintenance and worker feedback. The task-specific table below records the decision and stop point.
Select chemical-resistant gloves for the actual nickel compound and task, with a change and skin-care plan; an unsuitable glove can trap contamination. Respiratory protective equipment (RPE) must be selected, fit-tested if tight-fitting, maintained and worn correctly. Stop the affected task if relied-on containment, extraction or protection fails. Do not treat skin cream or a reminder poster as the main control.
HSE places elimination and substitution before engineering controls, administrative measures and PPE. Apply that order to the task, then check whether the selected controls work in use.
Keep physical controls effective through inspection, maintenance and action when a check fails. A reminder or retraining alone cannot compensate for a leaking transfer, failed extraction or dangerous atmosphere.
SHARE ERICPD is a memory aid for choosing stronger controls: Eliminate the hazardous step where feasible; Reduce through substitution or a lower-emission method; Isolate with enclosure or closed transfer; Control exposure through engineering and suitable work arrangements; use Personal protection for assessed residual exposure; and maintain Discipline through checks, supervision and prompt correction. The first five ideas map to HSE’s elimination, substitution, engineering, administrative and PPE hierarchy. Discipline supports effective use and review of every level; it is not a separate higher-order control or permission to depend on behaviour when a stronger physical control is feasible. See HSE five-level control hierarchy.
What failure chains lead to illness?
An unrecognised nickel form, uncontrolled route and delayed response can turn a manageable exposure into sensitisation, asthma or long-latency disease.
Skin route: a leaking plating glove and contaminated bench repeatedly wet a worker’s hands; early dermatitis is hidden until sensitisation limits future work. Airway route: extraction over a heated bath loses capture, mist reaches operators and cleaners, and a worker develops work-related wheeze. Long-latency route: years of poorly controlled compound dust or fume can contribute to cancer risk without an immediate warning symptom. Emergency route: a nickel-carbonyl release can be followed by delayed serious respiratory illness. Each route requires a different exposure check and escalation.
Which duties apply in Great Britain and Northern Ireland?
GB uses COSHH 2002 and RIDDOR 2013; NI uses its own COSHH 2003 and RIDDOR 1997 instruments. Apply the law and regulator route for the workplace location.
Both jurisdictions require assessment and effective control of hazardous-substance exposure. HSE’s GB exposure-limit list and HSENI’s NI guidance must be read with the actual substance form. Where surveillance is required by the risk, arrange a suitable programme and respond to findings. A clinician’s diagnosis and occupational evidence, not an employee’s suspicion alone, underpin a reportable disease decision. GB and NI reporting criteria differ, so a responsible person should check the relevant HSE or HSENI route. Sources: HSE COSHH control measures, HSENI COSHH guidance, HSE reportable occupational cancers, HSENI accident reporting.
Classification of a supplied nickel product and its label is not the same decision as safe workplace use. The employer must assess dust, fumes and mist generated by the actual process even if a product document is silent on them.
How should control and health checks work?
Check the capture system and skin-protection method in use, then use risk-based health surveillance to detect adverse effects and trigger action.
Before work, verify material identity, enclosure, LEV indication, glove suitability, washing facilities and defect route. During work, watch for visible mist or dust, splash, damaged gloves, loss of airflow and unexpected symptoms; stop and contain when a critical barrier fails. After work, clean without dispersing contamination and record repair and restart approval. A competent person should examine and test LEV at the required interval for the system and process; an inspection certificate does not replace daily checks. Sources: HSE COSHH health surveillance, HSENI COSHH guidance.
Health surveillance may involve skin checks or respiratory questions and tests where the risk assessment indicates. A competent occupational-health professional should set the method and referral threshold. It is not a guaranteed cancer screening programme; persistent symptoms still need ordinary clinical assessment. Keep employer health records distinct from confidential clinical notes.
Before the plating task, compare the LEV indicator with the commissioned operating range and observe capture at the actual bath load and worker position. Record a failed check, the defect owner and the person authorised to hold/release the line. Separately check glove interiors, clean handling points and contamination during removal: a favourable air result cannot close a skin-contact complaint. A test certificate does not replace these operating checks.
What competence must each role show?
Operators must demonstrate safe handling and stop conditions; supervisors, maintainers and specialists must prove the decisions they own.
A new worker should identify the nickel process, symptoms and reporting route. An operator should show the LEV and glove checks and demonstrate safe cleanup. A maintainer should be authorised for isolation and containment. A supervisor should challenge material changes and hold a task with failed extraction. Managers and purchasers must fund source controls, specialist advice and surveillance. Occupational hygienists and health professionals must work within their own scopes. Keep observations, assessor, date and reassessment trigger; course attendance alone is not task authorisation.
| Role | Learning and decision | Practical evidence | Assessor | Reassess when |
|---|---|---|---|---|
| Operator | Nickel route, LEV and glove checks | Observed setup, cleaning and stop decision | Supervisor | New bath or symptom |
| Maintainer | Isolation and containment for the plant | Observed maintenance method and hand-back | Engineering lead | Equipment or extraction change |
| Hygienist / occupational health | Exposure measurement or clinical surveillance in scope | Method, findings and referral advice | Relevant specialist lead | New exposure pattern or health signal |
| Manager | Control funding and restart authority | Field verification and action closure | Senior dutyholder | Failed control or process change |
What should the risk and assurance register capture?
Record each nickel form and process, exposure route, control owner, evidence of performance, health-response route and change trigger.
A useful entry identifies plating mist, welding fume or compound dust rather than only “nickel”. Link the assessment to supplier/process information, enclosure and extraction design, maintenance and exposure measurements, training, surveillance outcomes without revealing clinical notes, and corrective actions. Review after a new bath, alloy, consumable, extraction change, symptom cluster or uncontrolled release. A green inspection status cannot overrule visible mist or a failed capture check.
How does a management standard help?
HSE explains that a formal health and safety management system is optional. The employer must still plan, control, check and improve the measures for this task. For each plating-bath maintenance job, check the material identity, extraction result, skin-protection method and named restart authority against the actual work before signing it off.
Use it to ensure a failed LEV system is escalated, repaired and field-verified. Technical exposure decisions still come from the actual material, COSHH assessment, current regulator guidance and competent specialists. A certification badge does not prove the plating bath is controlled. Sources: HSE management-system guidance.
Why cannot a nickel assessment be copied between welding and plating?
The substance forms, mixtures and routes differ; the assessment must represent the actual task and the people exposed.
Consider a business with a plating line and a stainless-steel repair workshop. A previous plating assessment is offered as evidence for the welding repair. The hygienist must first establish the process-generated fume and other constituents; the plating assessment addressed its own solution, mist and contact tasks. The common word 'nickel' does not make those exposure situations equivalent. See HSE welding health risks.
For plating, examine how the actual operation can create mist and contact at the bath, fittings and contaminated surfaces. For welding, assess the actual metal, consumables, method and work position. Include people cleaning or maintaining the control equipment. A supplier document is useful information, but it cannot describe every condition created by a changed process. See HSE nickel plating asthma guidance. Also see HSE welding health risks.
The manager should ask for a reasoned control choice and evidence that it interrupts the relevant route. Skin protection does not establish fume capture, and an airborne sample does not establish adequate control of skin contact. Substance-specific health interpretation belongs with a competent clinician; do not classify every nickel form as having identical acute or long-term effects. See UKHSA nickel toxicology.
Decision basis: HSE welding health risks. HSE nickel plating asthma guidance. UKHSA nickel toxicology. The scenario and suggested records are illustrative; apply the source within its stated jurisdiction and the assessed work.
What changes when the plating load or agitation changes?
Check whether mist control and the work method remain effective under the new operating condition before accepting the change.
In an illustrative plating review, an engineer changes a workpiece arrangement and the operator now reaches around a splash barrier. The task owner checks the reach, bath-side contact and mist-capture conditions with the competent specialists. A barrier that worked for the old arrangement should not be accepted solely because it is still fitted. See HSE nickel plating asthma guidance.
Hold an operation when a relied-on enclosure or extraction barrier fails, and review the source before relying on additional PPE. Record the altered condition, the exposure questions, the repair or redesign and acceptance evidence. The buyer, engineer and supervisor need distinct responsibilities: specifying equipment, verifying its performance and checking continued use are connected decisions, not interchangeable signatures. See HSE COSHH control measures.
Decision basis: HSE nickel plating asthma guidance. HSE COSHH control measures. The scenario and suggested records are illustrative; apply the source within its stated jurisdiction and the assessed work.
How should a team respond to a health concern without guessing its cause?
Refer the person appropriately and review the relevant exposure barriers while preserving clinical confidentiality and uncertainty.
Learning check: a worker has a rash after handling contaminated fittings. The supervisor should arrange suitable health advice and review contact, hygiene and protective methods; they should not diagnose nickel allergy from appearance. A person may need individual work advice even when the overall task controls have been improved. See UKHSA nickel toxicology.
Learning check: an air result is low, so the manager proposes stopping the review of a skin complaint. The correct response is to recognise the separate route and ask occupational health and the hygienist what the evidence does and does not establish. Surveillance findings are a prompt to review the assessment and controls, not permission to expose others until they develop symptoms. See HSE COSHH health surveillance.
Keep the operational record to the necessary exposure information, control actions and agreed work advice. Confidential medical notes belong in the clinical system. Reassess after a new form or mixture, changed process, failed barrier or relevant health finding rather than simply repeating an old substance title on the risk register. See HSENI COSHH guidance.
Decision basis: UKHSA nickel toxicology. HSE COSHH health surveillance. HSENI COSHH guidance. The scenario and suggested records are illustrative; apply the source within its stated jurisdiction and the assessed work.
Which terms matter for nickel health?
These words distinguish substance form, control and evidence.
| Term | Expansion or meaning | Use here |
|---|---|---|
| COSHH | Control of Substances Hazardous to Health | Separate GB and NI workplace regulations. |
| LEV | Local exhaust ventilation | Captures mist or fume near its source. |
| RPE | Respiratory protective equipment | Residual protection after stronger controls. |
| WEL | Workplace exposure limit | A legally enforceable airborne limit averaged over its stated reference period, not a target. |
| UKHSA | UK Health Security Agency | UK government public-health authority for the linked toxicological overview. |
| Sensitisation | Immune response after exposure | Later small contact can provoke symptoms. |
| Nickel carbonyl | Highly toxic nickel compound | Distinct acute inhalation emergency. |
| HSE | Health and Safety Executive | Great Britain workplace regulator; use its guidance within scope. |
| HSENI | Health and Safety Executive for Northern Ireland | Northern Ireland workplace regulator; NI duties have separate instruments. |
| GB | Great Britain | England, Scotland and Wales; distinguish the NI legal route. |
| NI | Northern Ireland | Use the Northern Ireland legislation and regulator route. |
| EH40 | HSE workplace exposure limits publication | Read the actual substance, units, averaging period and notations. |
| PPE | Personal protective equipment | Residual personal protection supporting stronger source controls. |
| RIDDOR | Reporting of Injuries, Diseases and Dangerous Occurrences Regulations | Check the applicable GB or NI legal definition and reporting route. |
| ERICPD | Eliminate; Reduce; Isolate; Control; PPE; Discipline | SHARE planning prompt; Discipline means maintaining controls, not blame. |