SHAREhub
PROCESS SAFETY AWARENESS · SH-PSA-17

Electrical power and static ignition

Electrical power and static ignition — workplace learning illustration
Illustrative workplace context for this course.

Recognise electrical injury, loss of power and electrostatic ignition as distinct but connected process scenarios.

Free training · Approx. 80–115 minutes

Public teaching and practice are free. Use a free learner account in Moodle for confirmed saves and recorded assessment. A certificate of completion depends on completing the required learning, scoring at least 80% and answering every critical safety question correctly.

Open in the LMS →Try the interactive practice

Your practical case

A blending site plans a solvent transfer while a temporary light, a replacement hose and an unresolved bonding defect are discussed at handover.

Workers, supervisors, contractors and managers who need process-safety awareness within their actual roles.

Independent SHAREhub process-safety awareness using fictional cases and a Great Britain baseline; check the applicable Northern Ireland duties and actual site arrangements. This course does not award a NEBOSH qualification, establish specialist competence or authorise hazardous work.

What you will learn

Course outline

Understand the electrical scenarios

  1. Separate electrical injury, ignition and process upsetSeparate electrical injury, ignition and process upset.
  2. Recognise the boundary of electrical workRecognise the boundary of electrical work.
  3. Use hazardous-area information for its proper purposeUse hazardous-area information for its proper purpose.

Control electrical work and equipment

  1. Treat temporary electrical equipment as a process changeTreat temporary electrical equipment as a process change.
  2. Trace what a loss of power would disableTrace what a loss of power would disable.
  3. Explain charge generation and accumulationExplain charge generation and accumulation.

Understand charge and materials

  1. Distinguish bonding from earthingDistinguish bonding from earthing.
  2. Evaluate liquids, powders and insulating components togetherEvaluate liquids, powders and insulating components together.

Verify the protective arrangements

  1. Verify the function, not the appearance of a connectionVerify the function, not the appearance of a connection.
  2. Review electrical and static substitutions through change controlReview electrical and static substitutions through change control.

Make the release decision

  1. Keep electrical incident response within the emergency planKeep electrical incident response within the emergency plan.
  2. Resolve the combined transfer-readiness caseResolve the combined transfer-readiness case.

Practise and test your reasoning

12 lesson decisions and 6 required activities use evidence sorting, matching, sequencing, branching choices and applied checks. Dragging has equivalent labelled controls. The 20-question final assessment requires 80% and every critical answer, after all learning requirements are complete.

Use the linked risk assessment, toolbox talk, policy and assurance resources with their included fictional exercises. Points and module badges help show progress; they do not replace the assessment requirements.

Duration estimates include teaching, activities, checks and assessment. Your pace and retries may vary.

Sources and scope

Independent awareness study · PSM topic 3.5. Independent SHAREhub learning; this is not the NEBOSH qualification.

Knowledge Hub topic coverage

Read the lesson source references

Presentation and model workshop

Use the same course imagery, worked decisions and historical case in a 28-slide teaching companion. Practise classification, compare explained choices and inspect the linked model case.

Open the interactive presentation workshop · Download PowerPoint

This optional companion does not replace the required course activities or final assessment.