Fire and explosion prevention and protection

Choose and assure prevention and protection functions against their actual fire or explosion duty.
Free training · Approx. 95–135 minutes
Public teaching and practice are free. Use a free learner account in Moodle for confirmed saves and recorded assessment. A certificate of completion depends on completing the required learning, scoring at least 80% and answering every critical safety question correctly.
Your practical case
A maintenance change affects firewater availability, a fire-resisting penetration and a dust-system protection route. Production proposes treating each as an isolated minor defect.
Workers, supervisors, contractors and managers who need process-safety awareness within their actual roles.
Independent SHAREhub process-safety awareness using fictional cases and a Great Britain baseline; check the applicable Northern Ireland duties and actual site arrangements. This course does not award a NEBOSH qualification, establish specialist competence or authorise hazardous work.
What you will learn
- Define the fire-protection duty before counting equipment.
- Manage protection impairment as an operating decision.
- Use layout and separation for the actual consequence.
- Include propagation between connected equipment.
- Reconcile protection changes before restoration or release.
Course outline
Define the protective duty
- Define the fire-protection duty before counting equipmentDefine the fire-protection duty before counting equipment.
- Connect detection and alarm to an effective responseConnect detection and alarm to an effective response.
- Trace firewater and other shared dependenciesTrace firewater and other shared dependencies.
Assure active fire protection
- Manage protection impairment as an operating decisionManage protection impairment as an operating decision.
- Recognise passive protection as a complete assemblyRecognise passive protection as a complete assembly.
- Control penetrations and repairs against the tested systemControl penetrations and repairs against the tested system.
Preserve passive protection and layout
- Use layout and separation for the actual consequenceUse layout and separation for the actual consequence.
- Treat damage and change as barrier informationTreat damage and change as barrier information.
Understand explosion protection functions
- Distinguish explosion prevention from protectionDistinguish explosion prevention from protection.
- Include propagation between connected equipmentInclude propagation between connected equipment.
Control impairments and restoration
- Account for where relief or discharge goesAccount for where relief or discharge goes.
- Reconcile protection changes before restoration or releaseReconcile protection changes before restoration or release.
Practise and test your reasoning
12 lesson decisions and 6 required activities use evidence sorting, matching, sequencing, branching choices and applied checks. Dragging has equivalent labelled controls. The 20-question final assessment requires 80% and every critical answer, after all learning requirements are complete.
Use the linked risk assessment, toolbox talk, policy and assurance resources with their included fictional exercises. Points and module badges help show progress; they do not replace the assessment requirements.
Duration estimates include teaching, activities, checks and assessment. Your pace and retries may vary.
Sources and scope
Independent awareness study · PSM topic 4.2. Independent SHAREhub learning; this is not the NEBOSH qualification.
Presentation and model workshop
Use the same course imagery, worked decisions and historical case in a 28-slide teaching companion. Practise classification, compare explained choices and inspect the linked model case.
Open the interactive presentation workshop · Download PowerPoint
This optional companion does not replace the required course activities or final assessment.