Skip to main content

HAVs management

What you can take away

A company-branded PDF or editable Word hand-arm vibration exposure record.

  • Each tool or process, its vibration value, data source and entered contact time.
  • Tool contributions, combined daily A(8), exposure points and comparison with the action and limit values.
  • Assessment notes and follow-up controls to attach to your task or exposure records.
View completed example (PDF)

How it helps you at work

See which tools and tasks contribute most, compare changes to the work and keep the assumptions behind your exposure planning visible.

Keep it with your own records

Add your company logo and download the report. The tool also provides its existing profile-document save options; retain the report with your organisation’s exposure records.

How it works — the theory and its limits

A(8) expresses daily hand-arm vibration exposure on an eight-hour reference. For one tool it is the vibration magnitude multiplied by the square root of contact time divided by eight hours. Multiple tool contributions are combined by their squared exposure.

Use representative vibration values and the time vibration actually reaches the hands. Changing tools does not reset a person’s accumulated daily exposure.

Times to an action or limit value are not safe-use allowances. The calculation does not diagnose HAVS or replace the task assessment and exposure controls.

Method and guidance

Open the tool
  1. 1Identify tools and exposure
  2. 2Calculate the combined daily total
  3. 3Reduce exposure and arrange follow-up

SHARE HUB · DAILY EXPOSURE TOOL

Hand-arm vibration calculator

Add the tools and processes used by one person in one working day. Enter representative vibration magnitudes and actual vibration contact times. The calculator combines every tool’s contribution.

Each tool shows points per hour, time to EAV and ELV, partial A(8) and exposure points. EAV = 100 points; ELV = 400 points. Threshold times assume no other exposure and are not safe-use allowances. HSE profiles are initial estimates; check the actual tool and task.

Browse tool vibration profiles ↓

Combined daily exposure

Daily A(8)—m/s² A(8)
Daily exposure points—EAV 100 · ELV 400
Total contact time—Across all entered tools

Add a tool to calculate.

Record details

View profile documents

Profile saving currently stores the record in this browser for your signed-in profile. It is not synced to other devices. Download PDF or Word to keep a separate copy. The document includes all tool details, calculated results and assessment notes.

Method: HSE hand-arm vibration exposure calculator guidance. SHARE calculator; no HSE or Pulsar endorsement.

Which tools and tasks create hand-arm vibration risk?

The tool, task and total daily contact time determine vibration exposure. Use the profiles below to make an initial estimate, then check that the data represents your equipment and how it is used.

Browse by tool and task below. The vibration ranges and initial assessment values come from HSE’s typical vibration table. Each profile explains what changes exposure, practical controls and when to review the assessment.

Read the times as exposure benchmarks

EAV: 2.5 m/s² A(8), or 100 points. ELV: 5 m/s² A(8), or 400 points. EAV requires action; ELV must not be exceeded. These are not safe-use allowances. Reduce exposure through the work method and equipment, and add every tool’s contribution to the person’s daily total.

The times assume continuous exposure at the initial assessment value and no other vibration that day. “Trigger time” means time the hands are exposed while the equipment or workpiece vibrates, not the whole job or shift. A higher actual magnitude reaches the thresholds sooner.

Generic ranges cannot establish a specific tool’s exposure. Record make, model, accessory, material, operating mode and actual contact time; obtain representative supplier or measured data where needed. A manufacturer's test value may not represent your task. Breaks do not erase accumulated exposure, and anti-vibration gloves receive no reduction credit.

TOOL EXPOSURE GUIDE

Find your tool. Understand the exposure.

12 tool groups · 24 task profiles · vibration levels and trigger-time benchmarks

Angle grinders3 profiles · time to EAV: 37.0–187.5 min at initial values

Angle grinders: vibration and exposure profile

Typical tasks
Weld dressing, metal cutting, deburring, fettling and surface preparation. Match the disc and diameter to the actual operation.
What changes exposure
Disc damage or imbalance, an unsuitable accessory, hard material, forceful feed and repeated finishing runs can change exposure.
Practical controls
Design out repeated grinding; use prepared components or a supported process where practicable. Select the correct disc, keep it in good condition and maintain handles and bearings.
When to review
Reassess when the disc, diameter, material or process changes, when vibration increases, or when the daily number of cuts or finishing passes rises.

Tool types and boundaries

Separate small and large grinders, and cutting, grinding, flap-disc finishing, cup-brushing and diamond-cup work. Corded and battery power are not exposure classes; identify the actual model and accessory.

Exposure pattern to plan for

A series of short cuts and weld-finishing passes can give one operator a substantial daily total. A different disc or material invalidates an assumption that the previous job's magnitude still represents the work.

Before use and during the job

  • Confirm accessory diameter, application and speed compatibility using the actual tool instructions; inspect the disc, flanges and spindle.
  • Check the prescribed guard, side handle and any vibration-isolation components; quarantine damage or unusual vibration.
  • Observe representative loaded cuts or passes and record contact time, including other vibrating tools used that day.

Selecting a lower-exposure method or tool

Compare suitable grinders on the same accessory, material and completed task. Ask for the declaration, test method, uncertainty K and representative in-use data; assess both magnitude and time to finish, not a brand or 'anti-vibration' label.

Apply the HSE control and equipment-selection guidance; use the actual equipment instructions for compatibility and maintenance requirements.

Stop, report and review

Report tingling, numbness, blanching, reduced grip or dexterity promptly. Stop unsafe handling, tell the supervisor and obtain appropriate occupational-health or medical advice. Symptoms are not a self-diagnosis, and lack of symptoms is not evidence that exposure is controlled.

Profile exclusions

  • No make/model measurements or brand rankings
  • Flap-disc values do not apply to wire cups or diamond cups
  • No permission to use an incompatible disc or remove guards

Tool-specific questions

Is a smaller grinder always lower exposure?

No. Task suitability, accessory and completion time matter alongside magnitude; compare the complete job.

Does battery power make a grinder vibration-free?

No. Assess the particular tool and loaded operation.

What does halving grinder time achieve?

At an unchanged magnitude, it halves exposure points; A(8) becomes approximately 0.707 of its former value, not half.

Approximate trigger times at the stated initial value; no other daily exposure
Tool / task profileTypical range
m/s²
Initial value
m/s²
Time to EAVTime to ELV
100–180 mm angle grinder3–1071.02 h (61.2 min)4.08 h (244.9 min)
100/125 mm angle grinder with flapper disc2–543.12 h (187.5 min)12.50 h (750.0 min) · beyond 8 h
220–300 mm angle grinder4–11937.0 min2.47 h (148.1 min)
Concrete breakers1 profile · time to EAV: 15.3 min at initial values

Concrete breakers: vibration and exposure profile

Typical tasks
Breaking slabs, footings and concrete during groundworks, demolition and utilities work.
What changes exposure
Long breakout runs, hard or reinforced material, worn chisels, damaged suspension and awkward working angles can increase exposure.
Practical controls
Consider machine-mounted breaking, crushing, splitting or a redesigned removal method. For hand-held work, select a suitable vibration-reduced tool and maintain the chisel and suspension.
When to review
Check the exact model and anti-vibration system. Reassess harder material, slower progress, damaged mounts or a change in the amount of breakout.

The breaker profile is for vibration-reduced models, as qualified in L140 Appendix 3. Do not apply it to an unverified older road breaker.

Tool types and boundaries

Distinguish electric, pneumatic and hydraulic handheld breakers from machine-mounted or remotely operated equipment. The numerical breaker row below is specifically vibration-reduced equipment, not every road breaker.

Exposure pattern to plan for

Hard breakout can combine repeated impact with a long contact period. A faster tool may shorten the job, but a heavier tool is not automatically a lower-exposure choice. Avoid concentrating every breakout job on one experienced person.

Before use and during the job

  • Inspect the appropriate chisel, retainer, handles and suspension; use manufacturer limits for wear and maintenance.
  • Check the specified power, air or hydraulic supply and connections; do not compensate for poor performance by forcing the tool.
  • Record the material and representative loaded breakout time before allocating each person's remaining daily exposure.

Selecting a lower-exposure method or tool

First assess machine breaking, splitting or crushing with appropriate exclusion zones and other safeguards. If handheld breaking remains necessary, trial a suitable vibration-reduced tool under the planned material and maintenance conditions.

Apply the HSE control and equipment-selection guidance; use the actual equipment instructions for compatibility and maintenance requirements.

Stop, report and review

Report tingling, numbness, blanching, reduced grip or dexterity promptly. Stop unsafe handling, tell the supervisor and obtain appropriate occupational-health or medical advice. Symptoms are not a self-diagnosis, and lack of symptoms is not evidence that exposure is controlled.

Profile exclusions

  • Generic vibration-reduced data are not measurements of an older breaker
  • No universal 60-minute approval rule
  • Supervisor permission cannot authorise exceeding the ELV

Tool-specific questions

Can a supervisor sign off extra breaker time above the limit?

Not as an ordinary work-planning measure. Change the work method and reduce exposure; a signature is not an exemption.

Do isolated handles remove the risk?

No. Verify their condition and the resulting exposure.

Are all concrete breakers the same as jackhammers?

Names overlap. Identify the mechanism and actual equipment; count an operation once, not under both catalogue names.

Approximate trigger times at the stated initial value; no other daily exposure
Tool / task profileTypical range
m/s²
Initial value
m/s²
Time to EAVTime to ELV
Vibration-reduced breaker7–181415.3 min1.02 h (61.2 min)
Chainsaws1 profile · time to EAV: 1.02 h (61.2 min) at initial values

Chainsaws: vibration and exposure profile

Typical tasks
Felling, cross-cutting, tree dismantling and timber clearance. Count repeated cuts across the whole day.
What changes exposure
Chain sharpness and tension, worn mounts, saw condition, working position and the amount of cutting affect exposure. Cold conditions add to the health risk.
Practical controls
Select a saw appropriate to the cut; maintain the chain, bar and isolation mounts. Use mechanised processing where practicable and plan work to reduce hand contact time.
When to review
Reassess a different saw, bar or chain, storm-clearance workload, damaged mounts, increased cutting effort or symptoms reported by the operator.

Tool types and boundaries

Record petrol or battery power, top-handle or rear-handle design, bar and chain specification, and the intended cutting task. This HAV profile does not authorise climbing, felling or use of a top-handled saw.

Exposure pattern to plan for

Repeated cutting during tree clearance or timber processing may accumulate appreciable exposure even when individual cuts are brief. Cold and difficult access require additional planning; warming the hands does not erase vibration dose.

Before use and during the job

  • Check chain condition, correct tension, bar lubrication and the prescribed safety devices using the actual saw instructions.
  • Inspect engine or motor isolation mounts and handles; remove damaged equipment from service.
  • Record cutting/contact time across the day; assess exposure at both hands using competent advice where the handle values differ.

Selecting a lower-exposure method or tool

Compare saws capable of the same cut and consider mechanised processing where feasible. Retain task-specific competence, protective equipment and tree-work controls. Do not assume a battery saw or heated grips guarantee low daily exposure.

Apply the HSE control and equipment-selection guidance; use the actual equipment instructions for compatibility and maintenance requirements.

Stop, report and review

Report tingling, numbness, blanching, reduced grip or dexterity promptly. Stop unsafe handling, tell the supervisor and obtain appropriate occupational-health or medical advice. Symptoms are not a self-diagnosis, and lack of symptoms is not evidence that exposure is controlled.

Profile exclusions

  • No felling, climbing or top-handle competence authorisation
  • No guaranteed vibration reduction from battery power
  • HSE web-table range 3–7 differs from L140's chainsaw range 5–7; this catalogue uses the web table

Tool-specific questions

Are battery chainsaws always lower vibration?

No universal ranking applies. Compare representative data and completion time for the actual cut.

How often must isolation mounts be replaced?

Use the manufacturer's maintenance requirements and condition assessment; no universal interval is supplied here.

Can gloves replace chainsaw exposure controls?

No. Appropriate gloves can protect against other hazards and cold, but receive no HAV exposure-reduction credit.

Approximate trigger times at the stated initial value; no other daily exposure
Tool / task profileTypical range
m/s²
Initial value
m/s²
Time to EAVTime to ELV
Chainsaw3–771.02 h (61.2 min)4.08 h (244.9 min)
Drills and rotary hammers5 profiles · time to EAV: 9.3–120.0 min at initial values

Drills and rotary hammers: vibration and exposure profile

Typical tasks
Fixing holes, service penetrations, core drilling and repetitive assembly. Separate ordinary drilling, impact drilling and heavy rotary-hammer work.
What changes exposure
The drilling mode, bit or core size, material, blunt bits, repeated holes, tool condition and pushing force all matter.
Practical controls
Reduce drilling through design or prefabrication. Use a suitable sharp bit, disable hammer action where unnecessary and consider a supported drilling rig for the task.
When to review
Record mode, bit diameter, material and holes per shift. Reassess reinforcement, harder aggregate, worn bits or slower drilling. Do not assign the ordinary-drill value to a heavy rotary hammer.

Tool types and boundaries

Separate rotary drilling, hammer/impact mode, rotary hammers, hole saws and core drills. Identify SDS-plus or SDS-max, bit diameter and material. SDS denotes a tooling system, not a single vibration magnitude.

Exposure pattern to plan for

Repeated fixing holes may create a larger daily dose than one apparently heavier operation. Hard aggregate, reinforcement encounters or an unsuitable bit can alter both magnitude and drilling time; stop and reassess rather than forcing progress.

Before use and during the job

  • Verify bit/core compatibility, condition, attachment and the required handles, support or clutch arrangements.
  • Confirm the selected operating mode and the substrate; assess services, dust and other drilling hazards separately.
  • Time representative holes and multiply by the planned number; separately account for other tools and changed modes.

Selecting a lower-exposure method or tool

Consider designed-in openings, prefabrication or an appropriate supported rig. Select a drill and bit that can complete the task efficiently; use hammer action only where the task and instructions require it. A stand needs its own stability, trapping and residual-vibration assessment.

Apply the HSE control and equipment-selection guidance; use the actual equipment instructions for compatibility and maintenance requirements.

Stop, report and review

Report tingling, numbness, blanching, reduced grip or dexterity promptly. Stop unsafe handling, tell the supervisor and obtain appropriate occupational-health or medical advice. Symptoms are not a self-diagnosis, and lack of symptoms is not evidence that exposure is controlled.

Profile exclusions

  • Ordinary-drill values must not be assigned to SDS-max rotary-hammer work
  • Core-drill values apply only to the stated profile, not every core diameter
  • A support does not automatically eliminate all hand contact

Tool-specific questions

Is a cordless drill automatically low risk?

No. Mode, material, magnitude and total contact time determine exposure.

Can hole count substitute for trigger-time observation?

Only with a representative measured time per hole and allowance for different materials or operations.

Does a drill stand prove zero HAV exposure?

No. Check whether hands still contact vibrating handles, controls or workpieces.

Approximate trigger times at the stated initial value; no other daily exposure
Tool / task profileTypical range
m/s²
Initial value
m/s²
Time to EAVTime to ELV
Ordinary drill with standard bit2–552.00 h (120.0 min)8.00 h (480.0 min)
Drill with hole saw4–121030.0 min2.00 h (120.0 min)
Core drill, 78–107 mm6–8846.9 min3.12 h (187.5 min)
Impact drill, 5 and 8 mm masonry bits7–131124.8 min1.65 h (99.2 min)
Demolition or rotary hammer10–21189.3 min37.0 min
Sanders2 profiles · time to EAV: 20.8–37.0 min at initial values

Sanders: vibration and exposure profile

Typical tasks
Panel finishing, feathering, joinery and surface preparation. Small repeated jobs can add up to substantial contact time.
What changes exposure
Pad balance, clogged abrasives, worn bearings, excessive pressure, awkward reach and long finishing runs affect exposure.
Practical controls
Improve the finish upstream; consider automated or supported sanding. Match the abrasive to the work, replace worn pads and maintain the tool. Assess hand contact with vibrating workpieces at fixed machines too.
When to review
Reassess a different pad, abrasive, material or finishing workload. Belt and floor sanders need representative task-specific data; these orbital values are not a substitute.

Tool types and boundaries

Identify orbital, random-orbital, belt, detail or floor sanding, and polishing as a separate operation. The numerical rows below cover orbital and random-orbital sanders only; pad, abrasive and work material must be recorded.

Exposure pattern to plan for

Finishing work can occupy much of a shift, so do not dismiss sanding as low exposure on appearance alone. The HSE initial values below show why an orbital tool still needs a planned daily assessment.

Before use and during the job

  • Inspect pad condition and balance, abrasive suitability and secure attachment; investigate unusual vibration.
  • Check bearings, handles and extraction arrangements; change clogged or worn abrasives through the planned safe maintenance method.
  • Observe loaded sanding time across panels and finishing stages, including vibrating workpieces handled at fixed equipment.

Selecting a lower-exposure method or tool

Improve upstream finishing or use suitable automated/supported methods before relying on rotation. Trial suitable sanders and abrasives on the same finish requirement; excessive pressure and long completion time can undermine a nominally lower value.

Apply the HSE control and equipment-selection guidance; use the actual equipment instructions for compatibility and maintenance requirements.

Stop, report and review

Report tingling, numbness, blanching, reduced grip or dexterity promptly. Stop unsafe handling, tell the supervisor and obtain appropriate occupational-health or medical advice. Symptoms are not a self-diagnosis, and lack of symptoms is not evidence that exposure is controlled.

Profile exclusions

  • Orbital values are not belt-sander, floor-sander or polisher measurements
  • Fixed equipment can still transmit vibration through the workpiece
  • Breaks do not reset daily points

Tool-specific questions

Are sanders necessarily lower risk than grinders?

No. Compare representative magnitude and total time; the tool name alone cannot rank daily exposure.

Is tingling after sanding a diagnosis of HAVS?

No. Report it and arrange appropriate occupational-health or medical assessment; do not dismiss it.

Is rotation better than substitution?

Not as a blanket rule. Test elimination and engineering options first, then use planned rotation as a supplementary control.

Approximate trigger times at the stated initial value; no other daily exposure
Tool / task profileTypical range
m/s²
Initial value
m/s²
Time to EAVTime to ELV
Random-orbital sander6–141220.8 min1.39 h (83.3 min)
Orbital sander4–12937.0 min2.47 h (148.1 min)
Jackhammers2 profiles · time to EAV: 4.8–9.3 min at initial values

Jackhammers: vibration and exposure profile

Typical tasks
Road and trench breakout, heavy demolition and foundation removal. “Jackhammer” is a broad name: identify the actual tool mechanism.
What changes exposure
Sustained impacts, worn chisels, damaged handle mounts, incorrect air supply and forceful or awkward handling can increase exposure.
Practical controls
Prefer remote or machine-mounted breaking where practicable. Select suitable vibration-reduced equipment, maintain it and follow the specified air supply and lubrication requirements.
When to review
Verify whether the tool fits the pneumatic-hammer, demolition-hammer or vibration-reduced-breaker profile. Reassess changes in material, tool condition or breakout workload.

Jackhammer and breaker names overlap. Choose the matching mechanism and model; do not count the same task twice under different names.

Tool types and boundaries

Jackhammer is an overlapping trade name for pneumatic road breakers and some heavy demolition hammers. Map the actual equipment to a verified profile; do not add the same work again as 'concrete breaker' exposure.

Exposure pattern to plan for

High-magnitude impact work can reach action benchmarks quickly. Unsupported caps such as 'one hour per day' cannot replace a calculation using the tool, task and all of that operator's other exposures.

Before use and during the job

  • Identify the mechanism, chisel, air supply and any vibration-isolation design using the equipment records.
  • Inspect the chisel retainer, handles, suspension and supply connections; quarantine unexpected vibration or defects.
  • Observe actual loaded contact time, posture and progress; reassess harder material or a changed demolition phase.

Selecting a lower-exposure method or tool

Examine remote or machine-mounted breaking, crushing or splitting before handheld operation. Where handheld work is justified, verify suitability, maintained vibration isolation and representative in-use data; a permission form cannot change the daily limit.

Apply the HSE control and equipment-selection guidance; use the actual equipment instructions for compatibility and maintenance requirements.

Stop, report and review

Report tingling, numbness, blanching, reduced grip or dexterity promptly. Stop unsafe handling, tell the supervisor and obtain appropriate occupational-health or medical advice. Symptoms are not a self-diagnosis, and lack of symptoms is not evidence that exposure is controlled.

Profile exclusions

  • Trade names are not distinct additive exposure categories
  • No guaranteed EAV time for every heavy hammer
  • No permission to override limits by supervisor sign-off

Tool-specific questions

Is every jackhammer more hazardous than every breaker?

No. Names overlap and individual magnitude and time must be assessed.

What is the first control to examine?

A work method that removes or reduces handheld contact, with the substitute method's other hazards assessed.

Does a daily cap establish safe use?

No. It is an administrative control that must be derived from a valid assessment and the individual's combined exposure.

Approximate trigger times at the stated initial value; no other daily exposure
Tool / task profileTypical range
m/s²
Initial value
m/s²
Time to EAVTime to ELV
Pneumatic hammer10–29254.8 min19.2 min
Demolition or rotary hammer10–21189.3 min37.0 min
Impact wrenches2 profiles · time to EAV: 30.0–120.0 min at initial values

Impact wrenches: vibration and exposure profile

Typical tasks
Wheel and tyre work, plant maintenance, rail fixings and bolted connections. Add the contact time from many short bursts.
What changes exposure
Seized fasteners, extended hammering, drive size, worn sockets or anvils, air supply and awkward access affect exposure.
Practical controls
Choose a suitable fastening method, such as an appropriate torque system. Use correct sound sockets, maintain the tool and prepare seized fasteners using an approved method.
When to review
Reassess drive size, tool model, fastening duty and the number of joints. A small impact driver is not automatically represented by an impact-wrench profile.

Tool types and boundaries

Identify pneumatic, hydraulic, battery or corded power, drive size, socket and fastening duty. An impact driver used for screws is not automatically represented by an impact-wrench row.

Exposure pattern to plan for

Many brief fastening bursts can be missed in a shift estimate. Seized fasteners can lengthen hammering time significantly; job count alone does not establish hand-contact duration.

Before use and during the job

  • Check correctly rated, compatible sockets and the anvil/retention system; replace damaged or worn items through a safe method.
  • For pneumatic equipment, verify the specified pressure, supply condition and lubrication.
  • Observe representative normal and difficult fasteners, record contact time and include other tools in the daily total.

Selecting a lower-exposure method or tool

Investigate suitable non-impact torque systems or redesigned fastening methods for repetitive work. Assess torque reaction, stored energy and access before substitution; reduced vibration does not make an alternative torque method risk-free.

Apply the HSE control and equipment-selection guidance; use the actual equipment instructions for compatibility and maintenance requirements.

Stop, report and review

Report tingling, numbness, blanching, reduced grip or dexterity promptly. Stop unsafe handling, tell the supervisor and obtain appropriate occupational-health or medical advice. Symptoms are not a self-diagnosis, and lack of symptoms is not evidence that exposure is controlled.

Profile exclusions

  • Impact-wrench figures do not automatically apply to screw-driving impact drivers
  • Drive size does not prove a particular model's magnitude
  • No uncontrolled heating or chemical treatment of seized fasteners

Tool-specific questions

Is a cordless wrench always lower exposure than pneumatic?

No. Compare suitable tools on the same fastener task and completion time.

Can fastener count establish exposure?

Use observed representative time per fastener and include unusually difficult jobs.

Is a hydraulic torque tool automatically safer?

No. It may reduce impact exposure but introduces reaction-force and other hazards that need assessment.

Approximate trigger times at the stated initial value; no other daily exposure
Tool / task profileTypical range
m/s²
Initial value
m/s²
Time to EAVTime to ELV
Impact wrench, 3/8, 1/2 or 3/4 inch drive3–652.00 h (120.0 min)8.00 h (480.0 min)
Impact wrench, 1 inch drive7–111030.0 min2.00 h (120.0 min)
Disc cutters and cut-off saws1 profile · time to EAV: 17.8 min at initial values

Disc cutters and cut-off saws: vibration and exposure profile

Typical tasks
Cutting masonry, kerbs, paving and concrete. The published profile below is for masonry cutting.
What changes exposure
Disc condition, tool maintenance, cut depth, feed force, material and repeated cuts affect exposure.
Practical controls
Use pre-cut components or a suitable supported cutting system where practicable. Select and maintain the correct disc and control dust, kickback and other cutting hazards alongside vibration.
When to review
Reassess a different material, disc, saw or cutting method. Do not transfer the masonry figure to every petrol or electric cutter without checking task suitability.

Tool types and boundaries

Identify handheld petrol, electric or battery cut-off saws, the disc and the cutting material. Trolley-mounted, bench and remote cutting need separate assessments; the numerical profile here is masonry cutting with a cut-off saw.

Exposure pattern to plan for

Long paving, kerb or utility-access cuts can concentrate contact time on one operator. Engine condition, the disc, material and feed can change exposure; power source alone is not a dependable ranking.

Before use and during the job

  • Verify disc application, size and speed compatibility, guard and mounting condition against the actual instructions.
  • Check handles, isolation mounts and the specified dust-control arrangements; isolate before servicing.
  • Record loaded cutting/contact time and reassess depth, material or a change to the cutting setup.

Selecting a lower-exposure method or tool

Consider prepared components or suitable bench, trolley or remote cutting for repeated runs. Check residual vibration at the handles and reassess dust, blade contact, kickback and movement; mounting the saw does not prove zero exposure.

Apply the HSE control and equipment-selection guidance; use the actual equipment instructions for compatibility and maintenance requirements.

Stop, report and review

Report tingling, numbness, blanching, reduced grip or dexterity promptly. Stop unsafe handling, tell the supervisor and obtain appropriate occupational-health or medical advice. Symptoms are not a self-diagnosis, and lack of symptoms is not evidence that exposure is controlled.

Profile exclusions

  • Masonry-cutting values are not universal metal-cutting figures
  • Trolley mounting does not prove zero HAV
  • No universal petrol-versus-electric ranking

Tool-specific questions

Are petrol cutters always higher vibration?

No universal ranking is established here; assess representative in-use data.

Does a trolley remove all HAV exposure?

Check remaining hand contact with vibrating controls; it may reduce exposure without eliminating it.

Is the table time a permitted daily cutting duration?

No. It is a single-profile threshold calculation with no other exposure assumed.

Approximate trigger times at the stated initial value; no other daily exposure
Tool / task profileTypical range
m/s²
Initial value
m/s²
Time to EAVTime to ELV
Cut-off saw cutting masonry5–141317.8 min1.18 h (71.0 min)
Needle guns and needle scalers2 profiles · time to EAV: 8.3–61.2 min at initial values

Needle guns and needle scalers: vibration and exposure profile

Typical tasks
Rust and coating removal, descaling, weld-spatter removal and steel surface preparation.
What changes exposure
A non-reduced tool, needle condition, air supply, heavy scale, tight grip and repeated short jobs can produce substantial daily exposure.
Practical controls
Consider a different preparation method, such as an enclosed or mechanised process. If scaling remains necessary, choose vibration-reduced equipment and maintain needles, air supply and lubrication.
When to review
Identify whether the tool is vibration-reduced. Reassess deteriorated needles, coating or scale changes, maintenance defects and accumulated contact time.

Tool types and boundaries

Needle guns are needle scalers, commonly pneumatic. Distinguish vibration-reduced and conventional designs, the needle set and surface-preparation task. Do not confuse these tools with nail guns.

Exposure pattern to plan for

Repeated descaling over many small areas can generate a substantial daily total. The difference between conventional and vibration-reduced rows is important; do not assign the lower figure merely because the handle looks padded.

Before use and during the job

  • Check needle condition, retention, handle/isolation condition and manufacturer maintenance requirements.
  • Verify specified air pressure and lubrication; investigate unexpected vibration or poor scaling performance.
  • Assess the coating and substrate, containment and contact time; do not spread hazardous coating debris through an unassessed method.

Selecting a lower-exposure method or tool

Evaluate an alternative preparation process that meets the finish requirement, then compare suitable maintained scalers if handheld impact remains necessary. Blasting, rotating brushes and chemical methods have their own exposure and physical hazards; they are not automatically lower-risk substitutes.

Apply the HSE control and equipment-selection guidance; use the actual equipment instructions for compatibility and maintenance requirements.

Stop, report and review

Report tingling, numbness, blanching, reduced grip or dexterity promptly. Stop unsafe handling, tell the supervisor and obtain appropriate occupational-health or medical advice. Symptoms are not a self-diagnosis, and lack of symptoms is not evidence that exposure is controlled.

Profile exclusions

  • Not a nail-gun or chipping-hammer profile
  • A soft grip is not evidence of a vibration-reduced mechanism
  • Substitute surface preparation needs its own dust/coating assessment

Tool-specific questions

Are needle scalers a significant HAV concern?

They can be: assess the actual design and cumulative contact time, not just the size of each repair.

Can a wire brush replace a needle scaler?

Only where it achieves the required finish and its own vibration, entanglement and contaminant risks are controlled.

Which row should I use for an unknown scaler?

Do not assume the vibration-reduced row. Obtain equipment identification and representative evidence.

Approximate trigger times at the stated initial value; no other daily exposure
Tool / task profileTypical range
m/s²
Initial value
m/s²
Time to EAVTime to ELV
Needle scaler, not vibration-reduced12–26198.3 min33.2 min
Vibration-reduced needle scaler3–871.02 h (61.2 min)4.08 h (244.9 min)
Chipping hammers2 profiles · time to EAV: 3.1–7.5 min at initial values

Chipping hammers: vibration and exposure profile

Typical tasks
Chipping welds or removing stone, concrete and rust. These are separate HSE profiles.
What changes exposure
Impact duty, material, chisel condition, grip force and sustained surface preparation can raise exposure.
Practical controls
Change or mechanise the preparation process where practicable. Use suitable maintained chisels and minimise hand-held impact work.
When to review
Reassess the material and chipping operation, chisel wear and the total amount of preparation. Weld chipping has a particularly short benchmark time.

Tool types and boundaries

Separate weld chipping from stone, concrete or rust removal. Record the mechanism, chisel, material and gripping method; these are not interchangeable with needle-scaler data.

Exposure pattern to plan for

These HSE profiles have high initial magnitudes, so even short contact periods matter. Holding a vibrating chisel directly can create exposure not represented by normal handle data.

Before use and during the job

  • Inspect the chisel, retainer and handles; follow the prescribed supply and lubrication requirements.
  • Confirm a method that avoids direct hand contact with the vibrating chisel or attachment.
  • Observe all loaded chipping periods and reassess changed material, accessories or unusually slow progress.

Selecting a lower-exposure method or tool

Investigate fabrication or preparation methods that avoid repeated impact removal. Where impact remains necessary, trial suitable vibration-reduced equipment and preserve the separate protection against fragments, noise and contamination.

Apply the HSE control and equipment-selection guidance; use the actual equipment instructions for compatibility and maintenance requirements.

Stop, report and review

Report tingling, numbness, blanching, reduced grip or dexterity promptly. Stop unsafe handling, tell the supervisor and obtain appropriate occupational-health or medical advice. Symptoms are not a self-diagnosis, and lack of symptoms is not evidence that exposure is controlled.

Profile exclusions

  • Weld and stone/concrete/rust values are distinct profiles
  • Normal handle data do not authorise gripping a vibrating chisel
  • Not a needle-scaler measurement

Tool-specific questions

Does a short chipping task need assessment?

Yes where risk is significant; high magnitude means short contact can contribute many points.

Can the operator hold the chisel for precision?

Do not approve that method from the table. Follow instructions and obtain competent assessment of direct vibration contact.

Can I substitute the needle-gun value?

No. Identify the actual mechanism and task.

Approximate trigger times at the stated initial value; no other daily exposure
Tool / task profileTypical range
m/s²
Initial value
m/s²
Time to EAVTime to ELV
Chipping hammer on welds20–32313.1 min12.5 min
Chipping hammer on stone, concrete or rust11–22207.5 min30.0 min
Plate compactors2 profiles · time to EAV: 9.3–187.5 min at initial values

Plate compactors: vibration and exposure profile

Typical tasks
Hand-guided compaction during groundworks, paving and reinstatement.
What changes exposure
Handle isolation, machine condition, ground conditions and time holding the operating machine affect hand-arm exposure.
Practical controls
Consider remote compaction or an appropriate alternative. Select effective handle isolation and maintain the machine and its mounts.
When to review
Verify the vibration-reduction system. Reassess ground conditions, defective mounts, a different machine or increased compaction work.

Tool types and boundaries

Identify conventional and vibration-reduced hand-guided plate compactors, the handle arrangement, material and travel mode. Ride-on rollers and trench rammers are different equipment; whole-body vibration is a separate assessment.

Exposure pattern to plan for

A moving machine may still expose the hands through its guide handle. The same operator's repeated passes and other vibrating tasks must be combined; engine-running time without hand contact is not automatically HAV contact time.

Before use and during the job

  • Inspect the handle suspension and isolation mounts; check the machine and controls using its instructions.
  • Confirm a compatible operating surface, route and pass plan; do not alter or bypass the vibration-isolation system.
  • Observe actual hand-contact time and reassess material, travel technique or compaction workload changes.

Selecting a lower-exposure method or tool

Consider suitable remotely operated or alternative compaction methods. For hand-guided work, verify that the lower-vibration design remains effective and completes the specified compaction; assess movement, trapping and exhaust risks too.

Apply the HSE control and equipment-selection guidance; use the actual equipment instructions for compatibility and maintenance requirements.

Stop, report and review

Report tingling, numbness, blanching, reduced grip or dexterity promptly. Stop unsafe handling, tell the supervisor and obtain appropriate occupational-health or medical advice. Symptoms are not a self-diagnosis, and lack of symptoms is not evidence that exposure is controlled.

Profile exclusions

  • Not a trench-rammer or roller profile
  • HAV values do not assess whole-body vibration
  • Engine-running time is not necessarily hand-contact time

Tool-specific questions

Does a hand-guided compactor create HAV exposure?

It can through the guide handle; assess actual vibration and contact time.

Can I use the reduced value for a damaged isolated handle?

No. Repair and verify performance; a design label is not evidence of current condition.

Does this cover a ride-on roller?

No. Assess its actual exposure routes, including whole-body vibration separately.

Approximate trigger times at the stated initial value; no other daily exposure
Tool / task profileTypical range
m/s²
Initial value
m/s²
Time to EAVTime to ELV
Plate compactor, not vibration-reduced9–22189.3 min37.0 min
Vibration-reduced plate compactor2–743.12 h (187.5 min)12.50 h (750.0 min) · beyond 8 h
Pedestal grinding1 profile · time to EAV: 46.9 min at initial values

Pedestal grinding: vibration and exposure profile

Typical tasks
Grinding or finishing a workpiece held against a fixed grinding wheel. A stationary machine can still transmit vibration through the workpiece.
What changes exposure
Wheel condition, workpiece size, contact force, work-rest setup and repeated finishing affect exposure.
Practical controls
Use appropriate rests, jigs or a supported or automated process to reduce hand contact. Maintain the wheel and follow safe grinding-machine practice.
When to review
Check vibration at the hand contact with the workpiece. Reassess a new wheel, workpiece, fixture, duty or increased finishing time.

Tool types and boundaries

The HAV route here is a vibrating workpiece held against a fixed grinder, not simply gripping a portable motor. Record wheel, material, part size and handling method.

Exposure pattern to plan for

A stationary machine can transmit vibration into the operator's hands through the part being processed. Small-part repetition and applied force can accumulate exposure even though the machine itself stays fixed.

Before use and during the job

  • Verify wheel suitability and condition, guards, work support and the intended handling method under the actual machine instructions.
  • Check whether a suitable fixture can prevent or reduce hand contact without creating trapping, ejection or entanglement hazards.
  • Observe loaded workpiece-contact time; reassess a changed wheel, part, finish or production rate.

Selecting a lower-exposure method or tool

Consider upstream finishing, suitable fixtures or mechanised handling before manual feeding. A fixture's effect on vibration must be verified; keep the machine's abrasive-wheel and guarding requirements independently controlled.

Apply the HSE control and equipment-selection guidance; use the actual equipment instructions for compatibility and maintenance requirements.

Stop, report and review

Report tingling, numbness, blanching, reduced grip or dexterity promptly. Stop unsafe handling, tell the supervisor and obtain appropriate occupational-health or medical advice. Symptoms are not a self-diagnosis, and lack of symptoms is not evidence that exposure is controlled.

Profile exclusions

  • Not a portable angle-grinder profile
  • Fixed machine does not mean vibration-free workpiece
  • Generic HAV figures are not abrasive-wheel setup instructions

Tool-specific questions

Can a fixed grinder cause HAV exposure?

Yes, through a workpiece that vibrates while held.

Would gloves justify longer grinding time?

No HAV reduction credit is assigned; choose any hand protection only through the machine/task assessment.

Can a fixture eliminate exposure?

Only if it actually removes the relevant hand contact; assess its other hazards and verify the result.

Approximate trigger times at the stated initial value; no other daily exposure
Tool / task profileTypical range
m/s²
Initial value
m/s²
Time to EAVTime to ELV
Pedestal grinder2–11846.9 min3.12 h (187.5 min)

Use the figures in a daily assessment

  1. Choose a profile that matches the tool and task; replace the generic initial value with representative evidence when available.
  2. Observe actual vibration contact time. Add all tools and processes used by that person in the day.
  3. Calculate daily exposure and plan controls. For example, 10 m/s² for 15 minutes gives 50 points; another tool at 5 m/s² for 60 minutes gives another 50 points. Together they reach EAV, even though neither task reaches it alone.

Method: A(8) = a × √(t / 8), where a is vibration in m/s² and t is hours. Time to EAV = 3000 / a² minutes; time to ELV = 12000 / a² minutes. Exposure points per hour = 2a². For multiple tasks, add their points or squared partial A(8) values.

HSE’s generic dataset is an initial screening aid, not a catalogue of current branded models. L140 describes its underlying tool data and selection assumptions. Any equivalent Northern Ireland assessment must also apply the local duties described elsewhere on this page.

Structured tool data

Each record has a stable tool/profile ID, numeric magnitudes and times, units, tasks, exposure drivers, controls, review triggers, calculation assumptions and source links. JSONL contains one self-contained retrieval record per profile.

Take the next step

Sources, scope and guidance

Use the current guidance for the work and jurisdiction. Source review: 24 October 2026.