Dispatch, picking and everyday warehouse safety

Free online training · Approximate learning time: 160–240 minutes · Self-paced

Full public teaching and readers are free without an account. A free learner account is required for saved LMS progress and recorded assessment. Completion and any course-completion certificate depend on the configured LMS conditions. Open the course overview.

Lesson 1

A picking route is a work system

Separate hazards, exposure and harm when describing a picking task.

A picking route is a work system

Follow a picker from the task list to the collection point. Record walking routes, load dimensions, floor contamination, waste disposal and vehicle crossings. Changes at one point can move exposure to the next person.

Plan picking around people, stock and changing floor conditions.

Follow the task through the area

Spill at the picking aisle

Unidentified liquid is spreading beside the picking aisle. Nia is approaching; the liquid and its source are unknown.

A blocked pedestrian route

A delivery pallet blocks the marked route. The tempting shortcut passes through the vehicle lane.

An awkward carton at packing

Leo needs to move a carton from the bench to a low destination. Weight, balance and the complete transfer have not been checked.

Packaging building up on the floor

Film and strapping are building up near packing. People are beginning to step around the waste.

A gap in vehicle separation

A temporary opening exposes the pedestrian area to the vehicle route. Ash has stopped the forklift.

Learning from an earlier load shift

Nia reports a load shift that narrowly missed a colleague. Immediate danger is already controlled; the team needs to learn what allowed it.

Challenge the first impression

Keep people clear from a safe position, arrange effective isolation and a diversion, and report the unknown spill to the designated person. Keep those immediate controls while considering stronger source or task changes.

A trained response has controlled the source; the floor and safe route have been checked before reopening. Ask who owns the control and when it should be reviewed if the task changes.

What is the HSE-style cause model for slips and trips?

A useful cause model looks at contamination, flooring, footwear, environment, cleaning, lighting, design, maintenance and behaviour.

This model keeps investigations away from blaming the injured person too early. HSE's prevention material separates causes such as contamination, cleaning, people or human factors, flooring, environment and footwear. A strong workplace model can expand that into the factors supervisors actually see: lighting, design, maintenance and behaviour under real task pressure.

A slip is usually about loss of grip; a trip is usually about an obstruction or unexpected change in walking surface. Some events include both: a worker carrying a box may trip on a mat edge and then slip while trying to recover balance. The cause model helps the assessor test the whole route rather than one visible hazard.

Cause areaTypical failureWhat to check
ContaminationWater, oil, dust, mud, leaves, food, granules or process residue on the route.Source prevention, spill response, drainage and cleaning method.
FlooringSurface is too smooth, worn, damaged, uneven or unsuitable for expected contamination.Slip resistance, condition, transitions, mats and repair history.
FootwearSole pattern/material does not match surface and contaminant.Footwear selection, trial, issue and worker feedback.
EnvironmentWeather, glare, temperature, congestion, noise or poor route separation affects walking.Entrances, external paths, yards, weather plan and route layout.
CleaningWet mopping, residue, poor drying or cleaning during peak footfall creates risk.Method, timing, barriers, drying checks and contractor control.
LightingHazards, edges, stairs or changes in level are hard to see.Lighting level, contrast, shadows, glare and emergency lighting.
DesignRoute forces people through wet zones, tight turns, slopes, steps or delivery conflicts.Layout, pedestrian flow, storage, access and public interface.
MaintenanceDefects, loose tiles, curled mats, potholes or worn stair nosings remain unresolved.Defect reporting, interim controls and close-out evidence.
Behaviour/taskPeople rush, carry loads, use phones, push trolleys or cannot see the floor.Task design, supervision, workload and realistic route use.

HSE supplies the six slip factors and obstruction/uneven-surface trip causes. Lighting, layout and maintenance are expanded local audit prompts. HSE slip/trip factors.

Applied case

The afternoon picking wave is behind schedule. A leaking package, abandoned wrapping and a pallet in the pedestrian route appear unrelated until the same picker must pass all three.

Compare your decision

Follow a picker from the task list to the collection point. Record walking routes, load dimensions, floor contamination, waste disposal and vehicle crossings. Changes at one point can move exposure to the next person.

Follow a picker from the task list to the collection point. Record walking routes, load dimensions, floor contamination, waste disposal and vehicle crossings. Changes at one point can move exposure to the next person. Check the actual conditions and retain protection while gaps are resolved.

Lesson 2

Distinguish the condition from the injury

Choose controls for spills, loads, wrapping and pedestrian interfaces.

Distinguish the condition from the injury

A floor defect is a condition; walking across it is exposure; a fall is one possible outcome. Recording an injury-free shift does not demonstrate that the route is controlled.

Plan picking around people, stock and changing floor conditions.

Follow the task through the area

Spill at the picking aisle

Unidentified liquid is spreading beside the picking aisle. Nia is approaching; the liquid and its source are unknown.

A blocked pedestrian route

A delivery pallet blocks the marked route. The tempting shortcut passes through the vehicle lane.

An awkward carton at packing

Leo needs to move a carton from the bench to a low destination. Weight, balance and the complete transfer have not been checked.

Packaging building up on the floor

Film and strapping are building up near packing. People are beginning to step around the waste.

A gap in vehicle separation

A temporary opening exposes the pedestrian area to the vehicle route. Ash has stopped the forklift.

Learning from an earlier load shift

Nia reports a load shift that narrowly missed a colleague. Immediate danger is already controlled; the team needs to learn what allowed it.

Challenge the first impression

Restrict the affected route, report it to Sam and arrange a protected diversion before coordinating removal. Keep those immediate controls while considering stronger source or task changes.

The authorised move is complete, the pallet is stored appropriately and the whole pedestrian route is checked. Ask who owns the control and when it should be reviewed if the task changes.

What is workplace transport and how does it cause harm?

Workplace transport is the movement and use of vehicles or mobile plant at work. Keep people out of vehicle paths, choose suitable vehicles and make sure drivers can operate them safely in the actual setting.

Best-practice guide · six simple steps

Best-practice guide: Safe Movement of People and Vehicles in the Workplace

Start with the key actions, then explore value, a workplace example, harm, stronger controls and further help. Choose a step or use Previous and Next; the guide does not advance automatically.

Step 1 of 6 · StartThis cardPNG imagePDFView full sizeAll 6 cardsPNG images (ZIP)PDF (6 pages)

Keep one card or the full set for social sharing, team briefings and learning. Each PDF contains one card per page. Read the full topic for explanations, questions and source links.

Read all six steps as text
  1. 1. What is workplace transport and how does it cause harm?

    Workplace transport is the movement and use of vehicles or mobile plant at work.

    • Avoid / redesign: Move pedestrian access and picking away from the loading route so the crossing is no longer needed.
    • Control the task: Install suitable fixed separation and protected crossing points; design gates and routes to keep people out of the truck envelope.
    • Verify before release: If the hazardous step remains, keep it within the task assessment and select the stronger feasible remaining controls.

    Workplace transport is the movement and use of vehicles or mobile plant at work. Keep people out of vehicle paths, choose suitable vehicles and make sure drivers can operate them safely in the actual setting. Workplace transport is the movement and use of vehicles and mobile plant in yards, warehouses, depots, forecourts and other work areas.

    Apply it: Which part of this plan would you check at the workface before authorising the task?

    Read this part of the full topicOpen the full topicHSE workplace transport introduction (Great Britain)HSE HSG136 third edition (Great Britain)Official task guidance: www.hse.gov.uk (Great Britain)
  2. 2. Turn safe movement of people and vehicles in the workplace knowledge into a decision

    Use the evidence to improve the actual work arrangement.

    • Change at source: Move pedestrian access and picking away from the loading route so the crossing is no longer needed.
    • Make it observable: If the hazardous step remains, keep it within the task assessment and select the stronger feasible remaining controls.
    • Keep useful evidence: Retain the delivery instructions, load information, route/bay assessment, equipment checks, driver briefing, defects and any changed-method authorisation.

    Workplace transport is the movement and use of vehicles and mobile plant in yards, warehouses, depots, forecourts and other work areas. People can be struck or crushed where their routes meet moving vehicles; unstable loads, falls from vehicles and overturns cause further serious injuries. Retain the delivery instructions, load information, route/bay assessment, equipment checks, driver briefing, defects and any changed-method authorisation.

    Apply it: What evidence would show that the change improves this task, rather than only completing a record?

    Read this part of the full topicOpen the full topicOfficial task guidance: www.hse.gov.uk (Great Britain)HSE delivering safely (Great Britain)HSE loading and unloading (Great Britain)
  3. 3. A pallet delivery in a busy warehouse yard

    Fictional example: a practical application of the existing topic lesson.

    • Setting: Receive and unload identified palletised packaged goods from a rigid lorry using a suitable counterbalance forklift.
    • Act: The supervisor checks the bay surface, lighting, pedestrian barriers, clear route and local unloading plan.
    • Hold / review: Hold an unbooked vehicle, changed vehicle type, unknown load mass, damaged pallet or shifted load for the supervisor and, when needed, supplier or competent specialist.

    The operator follows the agreed sequence within the equipment limits. Keep people out of the load and vehicle operating zone. The loading team confirms people and equipment are clear, remaining load is secure, doors and vehicle equipment are safe and the exit route is available.

    Apply it: At which point would you hold this example, and what evidence would allow it to proceed?

    Read this part of the full topicOpen the full topicHSE delivering safely (Great Britain)HSE loading and unloading (Great Britain)HSE HSG136 third edition (Great Britain)
  4. 4. Mechanism, likely harm, warning and stop decision

    Connect the task, the route to the person and the control that can fail.

    • Exposure route 1: Vehicle enters a pedestrian path; impact, crushing or run-over can cause major fractures, internal injury or death.
    • Exposure route 2: Load shifts or falls during travel or unloading; impact can cause head injury, crush injury or death.
    • Exposure route 3: A person climbs onto or leaves a vehicle; slipping or falling can cause fractures, head or spinal injury.

    Exposure route 1: Vehicle enters a pedestrian path; impact, crushing or run-over can cause major fractures, internal injury or death. Exposure route 2: Load shifts or falls during travel or unloading; impact can cause head injury, crush injury or death. Exposure route 3: A person climbs onto or leaves a vehicle; slipping or falling can cause fractures, head or spinal injury.

    Apply it: Who could be exposed, including other trades, cleaners, maintainers and people nearby?

    Read this part of the full topicOpen the full topicHSE workplace transport risk assessment (Great Britain)HSENI workplace transport risk assessment (Northern Ireland)HSE loading and unloading (Great Britain)
  5. 5. Choose controls for safe movement of people and vehicles in the workplace

    Start with the stronger practicable options and verify their effect.

    • Elimination: Move pedestrian access and picking away from the loading route so the crossing is no longer needed.
    • Engineering controls: Replace reversing-dependent unloading with a suitable drive-through arrangement after checking vehicle swept paths.
    • Engineering controls: Install suitable fixed separation and protected crossing points; design gates and routes to keep people out of the truck envelope.
    • Engineering controls: Check barrier strength, visibility, impact exposure and safe bay access for the actual trucks and loads.
    • Administrative controls: Agree delivery slots, driver waiting positions and crossing rules; stop vehicle movement before anyone enters the loading zone.

    Elimination: Move pedestrian access and picking away from the loading route so the crossing is no longer needed. Engineering controls: Replace reversing-dependent unloading with a suitable drive-through arrangement after checking vehicle swept paths. Engineering controls: Install suitable fixed separation and protected crossing points; design gates and routes to keep people out of the truck envelope. Engineering controls: Check barrier strength, visibility, impact exposure and safe bay access for the actual trucks and loads. Administrative controls: Agree delivery slots, driver waiting positions and crossing rules; stop vehicle movement before anyone enters the loading zone. Read the full control table for qualifications, ownership and verification. Use the actual task and applicable jurisdiction; existing technical approval remains unchanged.

    Apply it: Which stronger option can be used here, and who will verify it before accepting the remaining risk?

    Read this part of the full topicOpen the full topicOfficial task guidance: www.hse.gov.uk (Great Britain)
  6. 6. Use the full safe movement of people and vehicles in the workplace lesson

    Follow the official sources below and retain the task-specific evidence.

    • Official guidance: HSE workplace transport introduction
    • Official guidance: HSE HSG136 third edition
    • Task decision: Retain the delivery instructions, load information, route/bay assessment, equipment checks, driver briefing, defects and any changed-method authorisation.

    Apply it: Which official source and full-topic section will you use to resolve the next decision?

    Read this part of the full topicOpen the full topicHSE workplace transport introduction (Great Britain)HSE HSG136 third edition (Great Britain)Official task guidance: www.hse.gov.uk (Great Britain)

Simplified learning guide. Use the full topic, current official guidance and the actual work arrangements. Workplace scenarios labelled fictional are illustrative examples.

A yard can feel familiar while containing lethal crush points. A driver may not see someone behind a load or trailer; a turning vehicle can sweep into space outside its wheel tracks; and a pedestrian beside a wall has nowhere to escape. A slowly moving vehicle can still trap or run over a person. Loads can fall, vehicles can overturn, and people can fall while getting on, off or working on them. See HSE workplace transport introduction for the relevant source and scope.

The useful organising model is safe site, safe vehicle and safe driver. The site includes activities such as reversing, loading, parking and coupling, as well as the layout. A good driver cannot make an unsuitable route or an unstable load safe through care alone. HSE workplace transport introduction and HSE HSG136 third edition explain this model.

This page covers yards, warehouses, depots, forecourts and similar workplaces, including visiting drivers, contractors and the public. Driving on public roads needs additional road-traffic controls; loading beside a workplace can involve both regimes. Construction, quarries, ports, automated vehicles and dangerous-goods transfer also need their specific guidance. Exhaust, noise and vibration can cause longer-term harm and need their own assessments alongside collision prevention.

Applied case

The afternoon picking wave is behind schedule. A leaking package, abandoned wrapping and a pallet in the pedestrian route appear unrelated until the same picker must pass all three.

Compare your decision

A floor defect is a condition; walking across it is exposure; a fall is one possible outcome. Recording an injury-free shift does not demonstrate that the route is controlled.

A floor defect is a condition; walking across it is exposure; a fall is one possible outcome. Recording an injury-free shift does not demonstrate that the route is controlled. Check the actual conditions and retain protection while gaps are resolved.

Lesson 3

Spill at the picking aisle

See the contamination before someone steps into it.

Read the scene evidence

Unidentified liquid is spreading beside the picking aisle. Nia is approaching; the liquid and its source are unknown.

Look at the scene, identify the hazardous condition and keep that separate from who is present or whether an injury has happened.

How the harm pathway develops

Contaminated floor

The contaminant can reduce available friction. Its identity and source still need a suitable response.

Foot meets a low-grip surface

A person is exposed when the unsafe route remains in use. The approaching person is not the hazard.

Loss of balance and a fall

A slip can lead to impact and injury. The exact outcome is not predicted by this illustration.

Compare the work arrangements

ArrangementWhat changes exposure?
Uncontrolled arrangementA warning cone leaves the route physically open. People can still enter the unsafe area.
Protected arrangementEffective exclusion and an accessible diversion keep people away while a trained response is arranged.

Select controls by how they prevent harm

Keep people clear from a safe position, arrange effective isolation and a diversion, and report the unknown spill to the designated person. Keep those immediate controls while considering stronger source or task changes.

Use the five-level hierarchy below. Inspection, instruction and supervision sustain every chosen control; they do not replace physical prevention.

Control levelApplication to this case
EliminationRemove recurring contamination at its source where practicable.
SubstitutionNo separate substitution is claimed here. Compare suitable alternatives and check for new risks before changing the task.
Engineering controlsPrevent access to the unsafe section and provide an accessible alternative.
Administrative controlsPlan the contaminant-specific response and verify the actual floor condition. Maintain trained cleaning, route inspections and defect follow-up.
PPESelect suitable footwear for remaining exposure; it does not make a wet route safe.

Verify, communicate and hand back

A trained response has controlled the source; the floor and safe route have been checked before reopening. Ask who owns the control and when it should be reviewed if the task changes.

Explain the task-specific evidence, who must act and what restriction remains until it is resolved. A closed action or a course badge cannot establish a live site condition.

What is the HSE-style cause model for slips and trips?

A useful cause model looks at contamination, flooring, footwear, environment, cleaning, lighting, design, maintenance and behaviour.

This model keeps investigations away from blaming the injured person too early. HSE's prevention material separates causes such as contamination, cleaning, people or human factors, flooring, environment and footwear. A strong workplace model can expand that into the factors supervisors actually see: lighting, design, maintenance and behaviour under real task pressure.

A slip is usually about loss of grip; a trip is usually about an obstruction or unexpected change in walking surface. Some events include both: a worker carrying a box may trip on a mat edge and then slip while trying to recover balance. The cause model helps the assessor test the whole route rather than one visible hazard.

Cause areaTypical failureWhat to check
ContaminationWater, oil, dust, mud, leaves, food, granules or process residue on the route.Source prevention, spill response, drainage and cleaning method.
FlooringSurface is too smooth, worn, damaged, uneven or unsuitable for expected contamination.Slip resistance, condition, transitions, mats and repair history.
FootwearSole pattern/material does not match surface and contaminant.Footwear selection, trial, issue and worker feedback.
EnvironmentWeather, glare, temperature, congestion, noise or poor route separation affects walking.Entrances, external paths, yards, weather plan and route layout.
CleaningWet mopping, residue, poor drying or cleaning during peak footfall creates risk.Method, timing, barriers, drying checks and contractor control.
LightingHazards, edges, stairs or changes in level are hard to see.Lighting level, contrast, shadows, glare and emergency lighting.
DesignRoute forces people through wet zones, tight turns, slopes, steps or delivery conflicts.Layout, pedestrian flow, storage, access and public interface.
MaintenanceDefects, loose tiles, curled mats, potholes or worn stair nosings remain unresolved.Defect reporting, interim controls and close-out evidence.
Behaviour/taskPeople rush, carry loads, use phones, push trolleys or cannot see the floor.Task design, supervision, workload and realistic route use.

HSE supplies the six slip factors and obstruction/uneven-surface trip causes. Lighting, layout and maintenance are expanded local audit prompts. HSE slip/trip factors.

How can the ISO 45001 hierarchy of controls remove slip and trip hazards from workplace routes?

Control classification: Classify the mechanism separately from its upkeep: physical floor repair, drainage, barriers, protected routes, compartmentation, fire doors and suitable disposal facilities are physical measures where specified. Cleaning schedules, inspections, policies, funding, supervision and verification are administrative arrangements maintaining them. A verbal instruction is not a physical barrier. Read this correction with the source table. Retained overview and stage artwork requires the matching classification update.

Remove or reduce the hazard before relying on procedures or personal protection.

For slips and trips, assess the actual task and first look for a way to remove the hazard. Where that is not possible, consider a safer substitute, engineered separation and then clear work procedures. PPE protects against remaining exposure; it does not make an uncontrolled task safe. HSE hierarchy of controls

The selected measures need a named owner, a usable stop point and a check that they still work when the task or conditions change. In Northern Ireland, verify the separate legal route and site instructions.

For the wet entrance, eliminate recurring water entry at source where practicable. Reduce contamination with suitable matting, drainage and a cleaning method that leaves the route safe; physically prevent access while unsafe and provide an alternative. Repair floor and route defects, then select footwear for residual risk and sustain checks. ERICPD (Eliminate, Reduce, Isolate, Control, PPE, Discipline) is a teaching prompt; Discipline means competent cleaning, supervision and defect closure. HSE slip and trip factors; HSE barriers and cleaning.

How can the ERICPD hierarchy of controls remove slip and trip hazards from workplace routes?

ERICPD is a planning crossmap. Its prompts do not add a sixth rung or rank Isolate above engineering. Discipline verifies and sustains every control level.

Worked activity: Wet leisure-centre entrance
Activity and exposure
Wet entrance at a public leisure centre during heavy rain.
Before work
Wet leaves and rainwater carried through an entrance onto a smooth floor; no mat change or drainage response.
During the activity
Close or physically separate the wet route, give a safe alternative, remove contamination and inspect matting and drainage.
Hold or stop
Do not reopen while the floor remains wet or the alternate route creates another hazard.
Hand-back and release
Repair the recurrent water source, choose suitable matting/flooring, brief cleaners and reopen after a dry-floor check.
Evidence to retain
Record weather trigger, barrier time, floor condition, repair owner, worker feedback and repeat incidents.
Full example
Read the activity, checks and hand-back in context
ERICPD control levelTopic-specific exampleSource and full task context
Eliminate

Remove recurring water entry at source where practicable.

Read the full task example, checks and stop points on this page. HSE hierarchy of controls · HSE slip and trip factors · HSE barriers and cleaning
Reduce

Use suitable matting, drainage and safe cleaning.

Read the full task example, checks and stop points on this page. HSE hierarchy of controls · HSE slip and trip factors · HSE barriers and cleaning
Isolate

Prevent access while unsafe and provide an alternative route.

Read the full task example, checks and stop points on this page. HSE hierarchy of controls · HSE slip and trip factors · HSE barriers and cleaning
Control

Repair floor and route defects.

Read the full task example, checks and stop points on this page. HSE hierarchy of controls · HSE slip and trip factors · HSE barriers and cleaning
PPE

Select suitable footwear for residual risk.

Read the full task example, checks and stop points on this page. HSE hierarchy of controls · HSE slip and trip factors · HSE barriers and cleaning
Discipline

Maintain competent cleaning, inspections and defect closure.

Read the full task example, checks and stop points on this page. HSE hierarchy of controls · HSE slip and trip factors · HSE barriers and cleaning

How can the ISO 45001 hierarchy of controls remove slip and trip hazards from workplace routes?

The hierarchy of controls in ISO 45001:2018 comes under Clause 8.1.2 (Eliminating hazards and reducing OH&S risks), which is located within Clause 8 ("Operation").

ESEAP: Elimination, Substitution, Engineering controls, Administrative controls and PPE. Control order: HSE hierarchy of controls and IOSH hierarchy of control guidance.

Worked activity: Wet leisure-centre entrance
Activity and exposure
Wet entrance at a public leisure centre during heavy rain.
Before work
Wet leaves and rainwater carried through an entrance onto a smooth floor; no mat change or drainage response.
During the activity
Close or physically separate the wet route, give a safe alternative, remove contamination and inspect matting and drainage.
Hold or stop
Do not reopen while the floor remains wet or the alternate route creates another hazard.
Hand-back and release
Repair the recurrent water source, choose suitable matting/flooring, brief cleaners and reopen after a dry-floor check.
Evidence to retain
Record weather trigger, barrier time, floor condition, repair owner, worker feedback and repeat incidents.
Full example
Read the activity, checks and hand-back in context
ESEAP mapping crosswalk: these are retained ERICPD source rows, mapped to the five ESEAP levels. Read the control-classification correction for mixed physical and administrative measures; six source rows do not mean six ESEAP levels.
Five-level control stage(s)Topic-specific exampleSource and full task context
Elimination

Remove recurring water entry at source where practicable.

Read the full task example, checks and stop points on this page. HSE hierarchy of controls · HSE slip and trip factors · HSE barriers and cleaning
Engineering controls / Administrative controls

Use suitable matting, drainage and safe cleaning.

Read the full task example, checks and stop points on this page. HSE hierarchy of controls · HSE slip and trip factors · HSE barriers and cleaning
Engineering controls

Prevent access while unsafe and provide an alternative route.

Read the full task example, checks and stop points on this page. HSE hierarchy of controls · HSE slip and trip factors · HSE barriers and cleaning
Engineering controls / Administrative controls

Repair floor and route defects.

Read the full task example, checks and stop points on this page. HSE hierarchy of controls · HSE slip and trip factors · HSE barriers and cleaning
PPE

Select suitable footwear for residual risk.

Read the full task example, checks and stop points on this page. HSE hierarchy of controls · HSE slip and trip factors · HSE barriers and cleaning
Administrative controls

Maintain competent cleaning, inspections and defect closure.

Read the full task example, checks and stop points on this page. HSE hierarchy of controls · HSE slip and trip factors · HSE barriers and cleaning

Applied case

Unidentified liquid is spreading beside the picking aisle. Nia is approaching; the liquid and its source are unknown. At handover, someone says that assigning an action owner is enough to restart. Decide what is still needed.

Compare your decision

A trained response has controlled the source; the floor and safe route have been checked before reopening. Ask who owns the control and when it should be reviewed if the task changes.

A trained response has controlled the source; the floor and safe route have been checked before reopening. Ask who owns the control and when it should be reviewed if the task changes. Ownership and training support the control but do not demonstrate its effectiveness.

Lesson 4

A blocked pedestrian route

Follow the whole pedestrian journey.

Read the scene evidence

A delivery pallet blocks the marked route. The tempting shortcut passes through the vehicle lane.

Look at the scene, identify the hazardous condition and keep that separate from who is present or whether an injury has happened.

How the harm pathway develops

Blocked protected route

The obstruction changes how people actually move through the warehouse.

Person diverted into a vehicle path

If the diversion overlaps the vehicle route, moving plant can reach a person. Looking for a driver is not separation.

Strike, trapping or crushing

A moving vehicle can strike or trap a person, including at low speed. Visibility and rescue conditions affect the outcome.

Compare the work arrangements

ArrangementWhat changes exposure?
Uncontrolled arrangementPeople squeeze around the pallet into the truck envelope during deliveries.
Protected arrangementThe affected route is restricted; the diversion stays protected for the full journey.

Select controls by how they prevent harm

Restrict the affected route, report it to Sam and arrange a protected diversion before coordinating removal. Keep those immediate controls while considering stronger source or task changes.

Use the five-level hierarchy below. Inspection, instruction and supervision sustain every chosen control; they do not replace physical prevention.

Control levelApplication to this case
EliminationRedesign delivery and storage positions so pallets do not block the pedestrian journey.
SubstitutionNo separate substitution is claimed here. Compare suitable alternatives and check for new risks before changing the task.
Engineering controlsProvide effective physical separation and protected crossing arrangements.
Administrative controlsCoordinate the authorised move, exclude people and check the reopened route. Inspect routes at busy periods and correct informal shortcuts or recurring blockages.
PPEUse suitable visibility and foot protection for residual exposure.

Verify, communicate and hand back

The authorised move is complete, the pallet is stored appropriately and the whole pedestrian route is checked. Ask who owns the control and when it should be reviewed if the task changes.

Explain the task-specific evidence, who must act and what restriction remains until it is resolved. A closed action or a course badge cannot establish a live site condition.

What is workplace transport and how does it cause harm?

Workplace transport is the movement and use of vehicles or mobile plant at work. Keep people out of vehicle paths, choose suitable vehicles and make sure drivers can operate them safely in the actual setting.

Best-practice guide · six simple steps

Best-practice guide: Safe Movement of People and Vehicles in the Workplace

Start with the key actions, then explore value, a workplace example, harm, stronger controls and further help. Choose a step or use Previous and Next; the guide does not advance automatically.

Step 1 of 6 · StartThis cardPNG imagePDFView full sizeAll 6 cardsPNG images (ZIP)PDF (6 pages)

Keep one card or the full set for social sharing, team briefings and learning. Each PDF contains one card per page. Read the full topic for explanations, questions and source links.

Read all six steps as text
  1. 1. What is workplace transport and how does it cause harm?

    Workplace transport is the movement and use of vehicles or mobile plant at work.

    • Avoid / redesign: Move pedestrian access and picking away from the loading route so the crossing is no longer needed.
    • Control the task: Install suitable fixed separation and protected crossing points; design gates and routes to keep people out of the truck envelope.
    • Verify before release: If the hazardous step remains, keep it within the task assessment and select the stronger feasible remaining controls.

    Workplace transport is the movement and use of vehicles or mobile plant at work. Keep people out of vehicle paths, choose suitable vehicles and make sure drivers can operate them safely in the actual setting. Workplace transport is the movement and use of vehicles and mobile plant in yards, warehouses, depots, forecourts and other work areas.

    Apply it: Which part of this plan would you check at the workface before authorising the task?

    Read this part of the full topicOpen the full topicHSE workplace transport introduction (Great Britain)HSE HSG136 third edition (Great Britain)Official task guidance: www.hse.gov.uk (Great Britain)
  2. 2. Turn safe movement of people and vehicles in the workplace knowledge into a decision

    Use the evidence to improve the actual work arrangement.

    • Change at source: Move pedestrian access and picking away from the loading route so the crossing is no longer needed.
    • Make it observable: If the hazardous step remains, keep it within the task assessment and select the stronger feasible remaining controls.
    • Keep useful evidence: Retain the delivery instructions, load information, route/bay assessment, equipment checks, driver briefing, defects and any changed-method authorisation.

    Workplace transport is the movement and use of vehicles and mobile plant in yards, warehouses, depots, forecourts and other work areas. People can be struck or crushed where their routes meet moving vehicles; unstable loads, falls from vehicles and overturns cause further serious injuries. Retain the delivery instructions, load information, route/bay assessment, equipment checks, driver briefing, defects and any changed-method authorisation.

    Apply it: What evidence would show that the change improves this task, rather than only completing a record?

    Read this part of the full topicOpen the full topicOfficial task guidance: www.hse.gov.uk (Great Britain)HSE delivering safely (Great Britain)HSE loading and unloading (Great Britain)
  3. 3. A pallet delivery in a busy warehouse yard

    Fictional example: a practical application of the existing topic lesson.

    • Setting: Receive and unload identified palletised packaged goods from a rigid lorry using a suitable counterbalance forklift.
    • Act: The supervisor checks the bay surface, lighting, pedestrian barriers, clear route and local unloading plan.
    • Hold / review: Hold an unbooked vehicle, changed vehicle type, unknown load mass, damaged pallet or shifted load for the supervisor and, when needed, supplier or competent specialist.

    The operator follows the agreed sequence within the equipment limits. Keep people out of the load and vehicle operating zone. The loading team confirms people and equipment are clear, remaining load is secure, doors and vehicle equipment are safe and the exit route is available.

    Apply it: At which point would you hold this example, and what evidence would allow it to proceed?

    Read this part of the full topicOpen the full topicHSE delivering safely (Great Britain)HSE loading and unloading (Great Britain)HSE HSG136 third edition (Great Britain)
  4. 4. Mechanism, likely harm, warning and stop decision

    Connect the task, the route to the person and the control that can fail.

    • Exposure route 1: Vehicle enters a pedestrian path; impact, crushing or run-over can cause major fractures, internal injury or death.
    • Exposure route 2: Load shifts or falls during travel or unloading; impact can cause head injury, crush injury or death.
    • Exposure route 3: A person climbs onto or leaves a vehicle; slipping or falling can cause fractures, head or spinal injury.

    Exposure route 1: Vehicle enters a pedestrian path; impact, crushing or run-over can cause major fractures, internal injury or death. Exposure route 2: Load shifts or falls during travel or unloading; impact can cause head injury, crush injury or death. Exposure route 3: A person climbs onto or leaves a vehicle; slipping or falling can cause fractures, head or spinal injury.

    Apply it: Who could be exposed, including other trades, cleaners, maintainers and people nearby?

    Read this part of the full topicOpen the full topicHSE workplace transport risk assessment (Great Britain)HSENI workplace transport risk assessment (Northern Ireland)HSE loading and unloading (Great Britain)
  5. 5. Choose controls for safe movement of people and vehicles in the workplace

    Start with the stronger practicable options and verify their effect.

    • Elimination: Move pedestrian access and picking away from the loading route so the crossing is no longer needed.
    • Engineering controls: Replace reversing-dependent unloading with a suitable drive-through arrangement after checking vehicle swept paths.
    • Engineering controls: Install suitable fixed separation and protected crossing points; design gates and routes to keep people out of the truck envelope.
    • Engineering controls: Check barrier strength, visibility, impact exposure and safe bay access for the actual trucks and loads.
    • Administrative controls: Agree delivery slots, driver waiting positions and crossing rules; stop vehicle movement before anyone enters the loading zone.

    Elimination: Move pedestrian access and picking away from the loading route so the crossing is no longer needed. Engineering controls: Replace reversing-dependent unloading with a suitable drive-through arrangement after checking vehicle swept paths. Engineering controls: Install suitable fixed separation and protected crossing points; design gates and routes to keep people out of the truck envelope. Engineering controls: Check barrier strength, visibility, impact exposure and safe bay access for the actual trucks and loads. Administrative controls: Agree delivery slots, driver waiting positions and crossing rules; stop vehicle movement before anyone enters the loading zone. Read the full control table for qualifications, ownership and verification. Use the actual task and applicable jurisdiction; existing technical approval remains unchanged.

    Apply it: Which stronger option can be used here, and who will verify it before accepting the remaining risk?

    Read this part of the full topicOpen the full topicOfficial task guidance: www.hse.gov.uk (Great Britain)
  6. 6. Use the full safe movement of people and vehicles in the workplace lesson

    Follow the official sources below and retain the task-specific evidence.

    • Official guidance: HSE workplace transport introduction
    • Official guidance: HSE HSG136 third edition
    • Task decision: Retain the delivery instructions, load information, route/bay assessment, equipment checks, driver briefing, defects and any changed-method authorisation.

    Apply it: Which official source and full-topic section will you use to resolve the next decision?

    Read this part of the full topicOpen the full topicHSE workplace transport introduction (Great Britain)HSE HSG136 third edition (Great Britain)Official task guidance: www.hse.gov.uk (Great Britain)

Simplified learning guide. Use the full topic, current official guidance and the actual work arrangements. Workplace scenarios labelled fictional are illustrative examples.

A yard can feel familiar while containing lethal crush points. A driver may not see someone behind a load or trailer; a turning vehicle can sweep into space outside its wheel tracks; and a pedestrian beside a wall has nowhere to escape. A slowly moving vehicle can still trap or run over a person. Loads can fall, vehicles can overturn, and people can fall while getting on, off or working on them. See HSE workplace transport introduction for the relevant source and scope.

The useful organising model is safe site, safe vehicle and safe driver. The site includes activities such as reversing, loading, parking and coupling, as well as the layout. A good driver cannot make an unsuitable route or an unstable load safe through care alone. HSE workplace transport introduction and HSE HSG136 third edition explain this model.

This page covers yards, warehouses, depots, forecourts and similar workplaces, including visiting drivers, contractors and the public. Driving on public roads needs additional road-traffic controls; loading beside a workplace can involve both regimes. Construction, quarries, ports, automated vehicles and dangerous-goods transfer also need their specific guidance. Exhaust, noise and vibration can cause longer-term harm and need their own assessments alongside collision prevention.

How can the ISO 45001 hierarchy of controls prevent pedestrian contact with vehicles during loading-bay work?

Remove or reduce the hazard before relying on procedures or personal protection.

For safe movement of people and vehicles in the workplace, assess the actual task and first look for a way to remove the hazard. Where that is not possible, consider a safer substitute, engineered separation and then clear work procedures. PPE protects against remaining exposure; it does not make an uncontrolled task safe. HSE hierarchy of controls

The selected measures need a named owner, a usable stop point and a check that they still work when the task or conditions change. In Northern Ireland, verify the separate legal route and site instructions.

Deliveries cross a pedestrian route beside a loading bay; assess visiting drivers, picking tasks and peak movements.

How can the ERICPD hierarchy of controls prevent pedestrian contact with vehicles during loading-bay work?

ERICPD is a planning crossmap. Its prompts do not add a sixth rung or rank Isolate above engineering. Discipline verifies and sustains every control level.

Control levelControl for this activityOwner and verificationStop / restart decision
EliminateMove pedestrian access and picking away from the loading route so the crossing is no longer needed.

Basis: Official task guidance: www.hse.gov.uk

Transport owner observes the revised pedestrian journey and a representative delivery; confirm people no longer need to cross the truck route, including visiting drivers.If the hazardous step remains, keep it within the task assessment and select the stronger feasible remaining controls.
Reduce, including substitutionReplace reversing-dependent unloading with a suitable drive-through arrangement after checking vehicle swept paths.

Basis: Official task guidance: www.hse.gov.uk

Transport designer trials the drive-through swept path with the actual vehicle and checks that a new blind crossing or reversing manoeuvre has not been introduced.Reject an alternative if its performance is unproved or its new hazards are unresolved.
IsolateInstall suitable fixed separation and protected crossing points; design gates and routes to keep people out of the truck envelope.

Basis: Official task guidance: www.hse.gov.uk

Supervisor checks the actual boundary, affected people and connected work; verify separation or isolation before allowing access.Hold or stop for damaged barrier, pedestrian intrusion or an unplanned reversing manoeuvre.
Control: physical safeguardsCheck barrier strength, visibility, impact exposure and safe bay access for the actual trucks and loads.

Basis: Official task guidance: www.hse.gov.uk

Competent equipment/process owner checks route separation, crossing sightlines and representative truck movements.Hold or stop for damaged barrier, pedestrian intrusion or an unplanned reversing manoeuvre.
Control: work method and responseAgree delivery slots, driver waiting positions and crossing rules; stop vehicle movement before anyone enters the loading zone.

Basis: Official task guidance: www.hse.gov.uk

Supervisor confirms the work limits, competent cover, communication and stop/restart authority with the people doing this activity.Hold work when the agreed limits, competent cover or effective communication cannot be maintained.
PPEUse suitable visibility and foot protection for residual exposure; high-visibility clothing does not prevent a collision.

Basis: Official task guidance: www.hse.gov.uk

Assessor confirms whether personal protection is needed and checks suitability, condition, compatibility and any required fit evidence.Do not use unsuitable protection or rely on PPE to continue after an essential source control fails.
DisciplineInspect barriers after impacts, prevent informal shortcuts and verify the route at busy periods.

Basis: Official task guidance: www.hse.gov.uk

Release only after transport manager verifies routes with drivers and pedestrians. Retain verification and unresolved restrictions at handover.Keep the task on hold until required reinstatement evidence and unresolved defects are accepted by the responsible owner.

How can the ISO 45001 hierarchy of controls prevent pedestrian contact with vehicles during loading-bay work?

The hierarchy of controls in ISO 45001:2018 comes under Clause 8.1.2 (Eliminating hazards and reducing OH&S risks), which is located within Clause 8 ("Operation").

ESEAP: Elimination, Substitution, Engineering controls, Administrative controls and PPE. Control order: HSE hierarchy of controls and IOSH hierarchy of control guidance.

Five-level control stage(s)Control for this activityOwner and verificationStop / restart decision
EliminationMove pedestrian access and picking away from the loading route so the crossing is no longer needed.

Basis: Official task guidance: www.hse.gov.uk

Transport owner observes the revised pedestrian journey and a representative delivery; confirm people no longer need to cross the truck route, including visiting drivers.If the hazardous step remains, keep it within the task assessment and select the stronger feasible remaining controls.
Engineering controlsReplace reversing-dependent unloading with a suitable drive-through arrangement after checking vehicle swept paths.

Basis: Official task guidance: www.hse.gov.uk

Transport designer trials the drive-through swept path with the actual vehicle and checks that a new blind crossing or reversing manoeuvre has not been introduced.Reject an alternative if its performance is unproved or its new hazards are unresolved.
Engineering controlsInstall suitable fixed separation and protected crossing points; design gates and routes to keep people out of the truck envelope.

Basis: Official task guidance: www.hse.gov.uk

Supervisor checks the actual boundary, affected people and connected work; verify separation or isolation before allowing access.Hold or stop for damaged barrier, pedestrian intrusion or an unplanned reversing manoeuvre.
Engineering controlsCheck barrier strength, visibility, impact exposure and safe bay access for the actual trucks and loads.

Basis: Official task guidance: www.hse.gov.uk

Competent equipment/process owner checks route separation, crossing sightlines and representative truck movements.Hold or stop for damaged barrier, pedestrian intrusion or an unplanned reversing manoeuvre.
Administrative controlsAgree delivery slots, driver waiting positions and crossing rules; stop vehicle movement before anyone enters the loading zone.

Basis: Official task guidance: www.hse.gov.uk

Supervisor confirms the work limits, competent cover, communication and stop/restart authority with the people doing this activity.Hold work when the agreed limits, competent cover or effective communication cannot be maintained.
PPEUse suitable visibility and foot protection for residual exposure; high-visibility clothing does not prevent a collision.

Basis: Official task guidance: www.hse.gov.uk

Assessor confirms whether personal protection is needed and checks suitability, condition, compatibility and any required fit evidence.Do not use unsuitable protection or rely on PPE to continue after an essential source control fails.
Administrative controlsInspect barriers after impacts, prevent informal shortcuts and verify the route at busy periods.

Basis: Official task guidance: www.hse.gov.uk

Release only after transport manager verifies routes with drivers and pedestrians. Retain verification and unresolved restrictions at handover.Keep the task on hold until required reinstatement evidence and unresolved defects are accepted by the responsible owner.

Applied case

A delivery pallet blocks the marked route. The tempting shortcut passes through the vehicle lane. At handover, someone says that assigning an action owner is enough to restart. Decide what is still needed.

Compare your decision

The authorised move is complete, the pallet is stored appropriately and the whole pedestrian route is checked. Ask who owns the control and when it should be reviewed if the task changes.

The authorised move is complete, the pallet is stored appropriately and the whole pedestrian route is checked. Ask who owns the control and when it should be reviewed if the task changes. Ownership and training support the control but do not demonstrate its effectiveness.

Lesson 5

An awkward carton at packing

Redesign the task before relying on technique.

Read the scene evidence

Leo needs to move a carton from the bench to a low destination. Weight, balance and the complete transfer have not been checked.

Look at the scene, identify the hazardous condition and keep that separate from who is present or whether an injury has happened.

A worker in navy clothing seen from behind beside a separate enlarged side view of the lumbar spine and sacrum, with discs, yellow nerve roots and back muscle.View full detail ↗
The lower back: location and side view

The worker locates the lower back; the separate side view enlarges its bones, discs, nerve roots and nearby muscle.

Locate the lower back. How could the load, reach, route, equipment or work pattern be changed for the task in this lesson?

educational illustration · healthy anatomy; enlarged details and teaching colours.

How the harm pathway develops

Demanding handling task

Hazardous handling arises from the task, load, person, environment and work organisation together.

Force, reach, posture and repetition

An awkward reach, low transfer height, unstable grip or repeated effort can increase demand. Weight alone cannot describe the task.

Musculoskeletal injury or discomfort

Handling can contribute to injury or discomfort. This scene does not diagnose a condition or calculate a personal safe limit.

Compare the work arrangements

ArrangementWhat changes exposure?
Uncontrolled arrangementUncertain load information, low placement, awkward reach and pressure to hurry remain unresolved.
Protected arrangementThe hazardous lift is avoided where practicable; the remaining operation uses an assessed method, suitable aid and clear transfers.

Select controls by how they prevent harm

Pause the move, obtain reliable load information and first look for a way to avoid the hazardous lift. Keep those immediate controls while considering stronger source or task changes.

Use the five-level hierarchy below. Inspection, instruction and supervision sustain every chosen control; they do not replace physical prevention.

Control levelApplication to this case
EliminationChange supply or dispatch arrangements to avoid the repeated hazardous transfer where practicable.
SubstitutionNo separate substitution is claimed here. Compare suitable alternatives and check for new risks before changing the task.
Engineering controlsUse a suitable lift table, positioner or aid with protection from trapping and unexpected movement.
Administrative controlsPlan the full task, route, loading, unloading, pace and individual needs. Maintain equipment, respond to discomfort or defects, and review changed loads or routes.
PPESelect suitable grip, foot or other protection for residual hazards where appropriate.

Verify, communicate and hand back

The assessed method works at both transfers, with a stable load, suitable aid, competent person and clear route. Ask who owns the control and when it should be reviewed if the task changes.

Explain the task-specific evidence, who must act and what restriction remains until it is resolved. A closed action or a course badge cannot establish a live site condition.

What is manual handling?

Manual handling is transporting or supporting a load by hand or bodily force, including lifting, lowering, pushing, pulling, carrying and moving.

Best-practice guide · six simple steps

Best-practice guide: Manual handling

Start with the key actions, then explore value, a workplace example, harm, stronger controls and further help. Choose a step or use Previous and Next; the guide does not advance automatically.

Step 1 of 6 · StartThis cardPNG imagePDFView full sizeAll 6 cardsPNG images (ZIP)PDF (6 pages)

Keep one card or the full set for social sharing, team briefings and learning. Each PDF contains one card per page. Read the full topic for explanations, questions and source links.

Read all six steps as text
  1. 1. Redesign the handling before teaching the lift

    Avoid hazardous handling where practicable; assess and reduce what remains.

    • Avoid: Change delivery or material flow to remove repeated manual transfers.
    • Redesign: Improve storage heights, routes, handling aids and the pace of work.
    • Verify: Observe the whole task, including replenishment and breakdown recovery.

    Manual handling includes lifting, lowering, pushing, pulling, carrying and supporting a load by bodily force. Assess the task, load, person, environment and work organisation. A training refresher does not repair a threshold or make a damaged cage easy to push.

    Apply it: Which part of the picking route creates the greatest force, reach or repetition, and can it be removed?

    Read this part of the full topicOpen the full topicHSE manual handling at work (Great Britain; method transferable)HSENI manual handling (Northern Ireland)HSE managing risk using PPE (Great Britain; apply separate Northern Ireland law where relevant, Great Britain)
  2. 2. Turn manual handling knowledge into a decision

    Use the evidence to improve the actual work arrangement.

    • Change at source: Procurement and operations consider delivery and dispatch arrangements that remove the repeated manual transfer, such as an appropriately designed direct transfer system.
    • Make it observable: Observe the complete flow, including replenishment and breakdown recovery.
    • Keep useful evidence: Store heavy items at better height or use lift table.

    Manual handling includes lifting, lowering, pushing, pulling, carrying and supporting a load by bodily force. Avoid hazardous handling where reasonably practicable, assess what remains and redesign the task before relying on technique alone. Store heavy items at better height or use lift table.

    Apply it: What evidence would show that the change improves this task, rather than only completing a record?

    Read this part of the full topicOpen the full topicHSE managing risk using PPE (Great Britain; apply separate Northern Ireland law where relevant, Great Britain)HSE manual handling at work (Great Britain; method transferable)HSE L23 Manual handling guidance on regulations (Great Britain)
  3. 3. Change a floor-level warehouse picking task

    Fictional example: a warehouse redesigns repeated picking and cage movement.

    • Find: Heavy boxes are picked from the floor and twisted into a cage.
    • Change: Raise the pick position, reorient the cage and repair the threshold.
    • Verify: Maintain cage wheels and observe handling during a realistic peak.

    The team observes the task rather than attributing repeated discomfort to poor technique. It assesses load size, frequency, reach, route and pushing forces, then trials suitable handling aids and work changes. Review the whole flow so the redesign does not transfer difficult handling to replenishment workers.

    Apply it: Can the team complete the redesigned pick and replenishment tasks without the former awkward transfer?

    Read this part of the full topicOpen the full topicHSE Manual Handling Assessment Charts (Great Britain; method transferable)HSE making the best use of lifting and handling aids (Great Britain; method transferable)
  4. 4. Follow the load, force and body position

    Connect the task, the route to the person and the control that can fail.

    • Force: A heavy or awkward load and poor wheels increase the effort needed.
    • Posture: Floor-level picks, twisting and long reaches load the back and shoulders.
    • Repetition: Frequent handling and inadequate recovery can accumulate strain.

    Handling risk depends on the complete task, including force, posture, frequency, duration and individual capability. A low weight alone does not establish safety. Act on discomfort reports and reassess tasks that have changed.

    Apply it: What changes when the load, route, frequency or worker’s needs differ from the assessment?

    Read this part of the full topicOpen the full topicHSE L23 Manual handling guidance on regulations (Great Britain)HSE MSD toolkit frequently asked questions (Great Britain; method transferable)
  5. 5. Choose controls for manual handling

    Start with the stronger practicable options and verify their effect.

    • Eliminate: Procurement and operations consider delivery and dispatch arrangements that remove the repeated manual transfer, such as an appropriately designed direct transfer system.
    • Reduce: Compare manageable packages and alternative supply formats where they fit the task; assess increased frequency, awkward grips and packaging stability.
    • Isolate: Select suitable pallet positioners, lift tables or handling aids, with safe access and protection from crushing or unexpected movement.
    • Control: Supervisors plan replenishment, routes, workload, task variation and individual needs; provide load information and training in the assessed method.
    • PPE: Select grip, foot or other protection for residual load and workplace hazards where appropriate.

    Eliminate: Procurement and operations consider delivery and dispatch arrangements that remove the repeated manual transfer, such as an appropriately designed direct transfer system. Reduce: Compare manageable packages and alternative supply formats where they fit the task; assess increased frequency, awkward grips and packaging stability. Isolate: Select suitable pallet positioners, lift tables or handling aids, with safe access and protection from crushing or unexpected movement. Control: Supervisors plan replenishment, routes, workload, task variation and individual needs; provide load information and training in the assessed method. PPE: Select grip, foot or other protection for residual load and workplace hazards where appropriate. Read the full control table for qualifications, ownership and verification. Use the actual task and applicable jurisdiction; existing technical approval remains unchanged.

    Apply it: Which stronger option can be used here, and who will verify it before accepting the remaining risk?

    Read this part of the full topicOpen the full topicHSE managing risk using PPE (Great Britain; apply separate Northern Ireland law where relevant, Great Britain)HSE manual handling at work (Great Britain; method transferable)HSE L23 Manual handling guidance on regulations (Great Britain)
  6. 6. Use the full manual handling lesson

    Follow the official sources below and retain the task-specific evidence.

    • Official guidance: HSE manual handling at work
    • Official guidance: HSENI manual handling
    • Task decision: Store heavy items at better height or use lift table.

    Apply it: Which official source and full-topic section will you use to resolve the next decision?

    Read this part of the full topicOpen the full topicHSE manual handling at work (Great Britain; method transferable)HSENI manual handling (Northern Ireland)HSE managing risk using PPE (Great Britain; apply separate Northern Ireland law where relevant, Great Britain)

Simplified learning guide. Use the full topic, current official guidance and the actual work arrangements. Workplace scenarios labelled fictional are illustrative examples.

A load can be an object, person or animal. Manual handling becomes hazardous when the task, load, person, environment or work organisation creates a risk of injury. The law does not set a single safe weight limit because risk depends on reach, height, frequency, posture, grip, distance, pace, recovery, floor condition, team handling and individual capability. Sources: HSE manual handling at work; HSENI manual handling

The legal hierarchy is simple and powerful: avoid hazardous manual handling so far as reasonably practicable; assess any hazardous handling that cannot be avoided; reduce the risk of injury so far as reasonably practicable. This means redesigning the work before relying on training. Sources: HSE manual handling at work; HSENI manual handling

Manual handling should be treated as work design. Repeated low weights, awkward reaches, poor storage, damaged wheels, rushed deliveries, unstable loads, heat, fatigue and lack of recovery can create as much risk as a single heavy lift. Sources: HSE manual handling at work; HSENI manual handling

Factor What to assess Examples
Task Posture, reach, twisting, lifting height, carrying distance, repetition and pace. Floor-level picking, shoulder-height stacking, repetitive loading.Sources: HSE manual handling at work; HSENI manual handling
Individual Capability, training, fatigue, pregnancy, injury, disability or temporary restriction. New starter, returning worker, pregnant worker or worker with back pain.Sources: HSE manual handling at work; HSENI manual handling
Load Weight, size, shape, stability, grip, centre of gravity and contents. Unstable sacks, awkward panels, unmarked heavy boxes.Sources: HSE manual handling at work; HSENI manual handling
Environment Space, flooring, steps, slopes, lighting, temperature and obstructions. Damaged threshold, congested route, cold store.Sources: HSE manual handling at work; HSENI manual handling
Other factors PPE, time pressure, team handling, mechanical aids and communication. Bulky gloves, noisy loading bay, poor trolley maintenance.Sources: HSE manual handling at work; HSENI manual handling
Recovery Whether the body can recover between efforts. Peak-season overtime and continuous handling.Sources: HSE manual handling at work; HSENI manual handling

How can the ISO 45001 hierarchy of controls avoid hazardous manual handling and reduce remaining strain?

Avoid hazardous manual handling where reasonably practicable, assess what remains and reduce the injury risk. Training and gloves support the chosen method; they cannot make an unsuitable repetitive lift safe.

Illustrative decision: warehouse workers repeatedly lift stock from floor-level pallets to dispatch benches. The manager and workers examine the whole supply-to-dispatch task, including reaching, twisting, pushing, load stability and differing individual capability.

ERICPD means Eliminate, Reduce (including substitution), Isolate, Control, PPE and Discipline. The five-level hierarchy groups measures as elimination, substitution, engineering controls, administrative controls and PPE. They overlap: isolation is usually an engineering measure; control can include engineered and administrative measures. Discipline means maintaining and checking the controls, supervising the method and learning from defects, rather than blaming someone or accepting weaker protection.

How can the ERICPD hierarchy of controls avoid hazardous manual handling and reduce remaining strain?

ERICPD is a planning crossmap. Its prompts do not add a sixth rung or rank Isolate above engineering. Discipline verifies and sustains every control level.

Worked activity: Task application for Manual handling
Activity and release context
ERICPD means Eliminate, Reduce (including substitution), Isolate, Control, PPE and Discipline. The five-level hierarchy groups measures as elimination, substitution, engineering controls, administrative controls and PPE. They overlap: isolation is usually an engineering measure; control can include engineered and administrative measures. Discipline means maintaining and checking the controls, supervising the method and learning from defects, rather than blaming someone or accepting weaker protection.
Full example
Read the activity, checks and hand-back in context
Controls and evidence for the illustrative task
ERICPD and five-level positionIntervention and ownerVerification, failure and stop point
Eliminate / eliminationProcurement and operations consider delivery and dispatch arrangements that remove the repeated manual transfer, such as an appropriately designed direct transfer system.Observe the complete flow, including replenishment and breakdown recovery. A machine that shifts the lifting burden to another worker has not eliminated the hazardous operation.
Reduce / substitution when replacing a hazard; otherwise engineering or administrative risk reductionCompare manageable packages and alternative supply formats where they fit the task; assess increased frequency, awkward grips and packaging stability.Record the total task exposure and worker feedback. No package weight is a universal safe limit; more smaller lifts can still create substantial risk.
Isolate / engineeringSelect suitable pallet positioners, lift tables or handling aids, with safe access and protection from crushing or unexpected movement. Design reach and destination heights around the actual task.Check load capacity, stability, condition, use and the real movement forces. An unsuitable aid or unresolved crush point prevents release of that method.
Control / administrativeSupervisors plan replenishment, routes, workload, task variation and individual needs; provide load information and training in the assessed method.Watch work at realistic pace and include unusual loads and damaged pallets. A team lift or rotation is not an automatic solution; difficult handling returns to assessment.
PPE / PPESelect grip, foot or other protection for residual load and workplace hazards where appropriate. Check it does not worsen handling.Verify fit and condition. Gloves or supportive clothing do not remove musculoskeletal loading or establish a safe lift.
Discipline / sustained engineering and administrative controlsManagers maintain aids, respond to defects and discomfort, and revisit the assessment after workload, packaging or route changes.Retain task observations and corrective actions. A failed aid or new unstable load requires a safe alternative or pause rather than routine manual workaround.

How can the ISO 45001 hierarchy of controls avoid hazardous manual handling and reduce remaining strain?

The hierarchy of controls in ISO 45001:2018 comes under Clause 8.1.2 (Eliminating hazards and reducing OH&S risks), which is located within Clause 8 ("Operation").

ESEAP: Elimination, Substitution, Engineering controls, Administrative controls and PPE. Control order: HSE hierarchy of controls and IOSH hierarchy of control guidance.

Worked activity: Task application for Manual handling
Activity and release context
ERICPD means Eliminate, Reduce (including substitution), Isolate, Control, PPE and Discipline. The five-level hierarchy groups measures as elimination, substitution, engineering controls, administrative controls and PPE. They overlap: isolation is usually an engineering measure; control can include engineered and administrative measures. Discipline means maintaining and checking the controls, supervising the method and learning from defects, rather than blaming someone or accepting weaker protection.
Full example
Read the activity, checks and hand-back in context
Controls and evidence for the illustrative task
ERICPD and five-level positionIntervention and ownerVerification, failure and stop point
Eliminate / eliminationProcurement and operations consider delivery and dispatch arrangements that remove the repeated manual transfer, such as an appropriately designed direct transfer system.Observe the complete flow, including replenishment and breakdown recovery. A machine that shifts the lifting burden to another worker has not eliminated the hazardous operation.
Reduce / substitution when replacing a hazard; otherwise engineering or administrative risk reductionCompare manageable packages and alternative supply formats where they fit the task; assess increased frequency, awkward grips and packaging stability.Record the total task exposure and worker feedback. No package weight is a universal safe limit; more smaller lifts can still create substantial risk.
Isolate / engineeringSelect suitable pallet positioners, lift tables or handling aids, with safe access and protection from crushing or unexpected movement. Design reach and destination heights around the actual task.Check load capacity, stability, condition, use and the real movement forces. An unsuitable aid or unresolved crush point prevents release of that method.
Control / administrativeSupervisors plan replenishment, routes, workload, task variation and individual needs; provide load information and training in the assessed method.Watch work at realistic pace and include unusual loads and damaged pallets. A team lift or rotation is not an automatic solution; difficult handling returns to assessment.
PPE / PPESelect grip, foot or other protection for residual load and workplace hazards where appropriate. Check it does not worsen handling.Verify fit and condition. Gloves or supportive clothing do not remove musculoskeletal loading or establish a safe lift.
Discipline / sustained engineering and administrative controlsManagers maintain aids, respond to defects and discomfort, and revisit the assessment after workload, packaging or route changes.Retain task observations and corrective actions. A failed aid or new unstable load requires a safe alternative or pause rather than routine manual workaround.

The comparison is an original illustrative application of the general HSE hierarchy, not a machine-specific method, permit or design approval. The employer must choose measures for the actual work and jurisdiction. Apply the separate Northern Ireland legal route where relevant; the local assessment and competent technical decision govern release.

Sources: HSE hierarchy of controls; HSE manual handling at work; HSE L23 Manual handling guidance on regulations; HSE making the best use of lifting and handling aids; HSENI manual handling.

Applied case

Leo needs to move a carton from the bench to a low destination. Weight, balance and the complete transfer have not been checked. At handover, someone says that assigning an action owner is enough to restart. Decide what is still needed.

Compare your decision

The assessed method works at both transfers, with a stable load, suitable aid, competent person and clear route. Ask who owns the control and when it should be reviewed if the task changes.

The assessed method works at both transfers, with a stable load, suitable aid, competent person and clear route. Ask who owns the control and when it should be reviewed if the task changes. Ownership and training support the control but do not demonstrate its effectiveness.

Use the appropriate manual handling assessment

This additional teaching takes about 2–5 minutes, in addition to the course estimate. Optional reading and workplace assessment take additional time.

Start by asking whether the hazardous handling can be removed or redesigned. Where handling remains, observe the whole operation with the people who do it and choose an assessment that fits the work.

These aids support the activity assessment. Repetitive upper-limb work may need ART; variable or complex tasks may need other HSE tools or a fuller competent assessment. Mechanical lifting, stored energy, equipment safety and health decisions retain their separate controls. A low factor score, a downloaded report or completion of this course does not approve the work.

TILEO: Task, Individual, Load, Environment and Other factors. MAC: Manual Handling Assessment Charts for appropriate lifting, carrying and team handling. RAPP: Risk Assessment of Pushing and Pulling for appropriate manual pushing and pulling.

Read the portable guide to understand selection, limitations, the mixed-task example and company-branded Word/PDF records. Your existing course checks and completion requirements remain separate.

Read the manual handling tools and records guide

Lesson 6

Packaging building up on the floor

Spot the work arrangement that keeps creating the hazard.

Read the scene evidence

Film and strapping are building up near packing. People are beginning to step around the waste.

Look at the scene, identify the hazardous condition and keep that separate from who is present or whether an injury has happened.

How the harm pathway develops

Loose film and strapping

Loose packaging is in or beside the walking route.

Foot meets an obstruction or slippery material

A foot can catch the strapping, or the material can affect grip. Carrying a load may also hide the obstruction.

Trip or loss of balance

A trip or fall can cause injury. Investigate the work arrangement, not a presumed lack of care.

Compare the work arrangements

ArrangementWhat changes exposure?
Uncontrolled arrangementWaste keeps returning because collection is separate from the packing job.
Protected arrangementCollection is built into the job and checked while packing is actually busy.

Select controls by how they prevent harm

Keep people clear and arrange safe removal into the designated waste container without creating another obstruction. Keep those immediate controls while considering stronger source or task changes.

Use the five-level hierarchy below. Inspection, instruction and supervision sustain every chosen control; they do not replace physical prevention.

Control levelApplication to this case
EliminationPrevent avoidable loose packaging entering the route through a better packing and collection arrangement.
SubstitutionNo separate substitution is claimed here. Compare suitable alternatives and check for new risks before changing the task.
Engineering controlsKeep people clear during safe removal, using an alternative route where needed.
Administrative controlsUse designated containers and a workable removal schedule. Check housekeeping during real work and close recurring causes with an owner.
PPEChoose suitable footwear for residual exposure; it cannot remove an obstruction.

Verify, communicate and hand back

The route remains clear during the continuing packing task and the collection arrangement is actually being used. Ask who owns the control and when it should be reviewed if the task changes.

Explain the task-specific evidence, who must act and what restriction remains until it is resolved. A closed action or a course badge cannot establish a live site condition.

What is the HSE-style cause model for slips and trips?

A useful cause model looks at contamination, flooring, footwear, environment, cleaning, lighting, design, maintenance and behaviour.

This model keeps investigations away from blaming the injured person too early. HSE's prevention material separates causes such as contamination, cleaning, people or human factors, flooring, environment and footwear. A strong workplace model can expand that into the factors supervisors actually see: lighting, design, maintenance and behaviour under real task pressure.

A slip is usually about loss of grip; a trip is usually about an obstruction or unexpected change in walking surface. Some events include both: a worker carrying a box may trip on a mat edge and then slip while trying to recover balance. The cause model helps the assessor test the whole route rather than one visible hazard.

Cause areaTypical failureWhat to check
ContaminationWater, oil, dust, mud, leaves, food, granules or process residue on the route.Source prevention, spill response, drainage and cleaning method.
FlooringSurface is too smooth, worn, damaged, uneven or unsuitable for expected contamination.Slip resistance, condition, transitions, mats and repair history.
FootwearSole pattern/material does not match surface and contaminant.Footwear selection, trial, issue and worker feedback.
EnvironmentWeather, glare, temperature, congestion, noise or poor route separation affects walking.Entrances, external paths, yards, weather plan and route layout.
CleaningWet mopping, residue, poor drying or cleaning during peak footfall creates risk.Method, timing, barriers, drying checks and contractor control.
LightingHazards, edges, stairs or changes in level are hard to see.Lighting level, contrast, shadows, glare and emergency lighting.
DesignRoute forces people through wet zones, tight turns, slopes, steps or delivery conflicts.Layout, pedestrian flow, storage, access and public interface.
MaintenanceDefects, loose tiles, curled mats, potholes or worn stair nosings remain unresolved.Defect reporting, interim controls and close-out evidence.
Behaviour/taskPeople rush, carry loads, use phones, push trolleys or cannot see the floor.Task design, supervision, workload and realistic route use.

HSE supplies the six slip factors and obstruction/uneven-surface trip causes. Lighting, layout and maintenance are expanded local audit prompts. HSE slip/trip factors.

How can the ISO 45001 hierarchy of controls remove slip and trip hazards from workplace routes?

Control classification: Classify the mechanism separately from its upkeep: physical floor repair, drainage, barriers, protected routes, compartmentation, fire doors and suitable disposal facilities are physical measures where specified. Cleaning schedules, inspections, policies, funding, supervision and verification are administrative arrangements maintaining them. A verbal instruction is not a physical barrier. Read this correction with the source table. Retained overview and stage artwork requires the matching classification update.

Remove or reduce the hazard before relying on procedures or personal protection.

For slips and trips, assess the actual task and first look for a way to remove the hazard. Where that is not possible, consider a safer substitute, engineered separation and then clear work procedures. PPE protects against remaining exposure; it does not make an uncontrolled task safe. HSE hierarchy of controls

The selected measures need a named owner, a usable stop point and a check that they still work when the task or conditions change. In Northern Ireland, verify the separate legal route and site instructions.

For the wet entrance, eliminate recurring water entry at source where practicable. Reduce contamination with suitable matting, drainage and a cleaning method that leaves the route safe; physically prevent access while unsafe and provide an alternative. Repair floor and route defects, then select footwear for residual risk and sustain checks. ERICPD (Eliminate, Reduce, Isolate, Control, PPE, Discipline) is a teaching prompt; Discipline means competent cleaning, supervision and defect closure. HSE slip and trip factors; HSE barriers and cleaning.

How can the ERICPD hierarchy of controls remove slip and trip hazards from workplace routes?

ERICPD is a planning crossmap. Its prompts do not add a sixth rung or rank Isolate above engineering. Discipline verifies and sustains every control level.

Worked activity: Wet leisure-centre entrance
Activity and exposure
Wet entrance at a public leisure centre during heavy rain.
Before work
Wet leaves and rainwater carried through an entrance onto a smooth floor; no mat change or drainage response.
During the activity
Close or physically separate the wet route, give a safe alternative, remove contamination and inspect matting and drainage.
Hold or stop
Do not reopen while the floor remains wet or the alternate route creates another hazard.
Hand-back and release
Repair the recurrent water source, choose suitable matting/flooring, brief cleaners and reopen after a dry-floor check.
Evidence to retain
Record weather trigger, barrier time, floor condition, repair owner, worker feedback and repeat incidents.
Full example
Read the activity, checks and hand-back in context
ERICPD control levelTopic-specific exampleSource and full task context
Eliminate

Remove recurring water entry at source where practicable.

Read the full task example, checks and stop points on this page. HSE hierarchy of controls · HSE slip and trip factors · HSE barriers and cleaning
Reduce

Use suitable matting, drainage and safe cleaning.

Read the full task example, checks and stop points on this page. HSE hierarchy of controls · HSE slip and trip factors · HSE barriers and cleaning
Isolate

Prevent access while unsafe and provide an alternative route.

Read the full task example, checks and stop points on this page. HSE hierarchy of controls · HSE slip and trip factors · HSE barriers and cleaning
Control

Repair floor and route defects.

Read the full task example, checks and stop points on this page. HSE hierarchy of controls · HSE slip and trip factors · HSE barriers and cleaning
PPE

Select suitable footwear for residual risk.

Read the full task example, checks and stop points on this page. HSE hierarchy of controls · HSE slip and trip factors · HSE barriers and cleaning
Discipline

Maintain competent cleaning, inspections and defect closure.

Read the full task example, checks and stop points on this page. HSE hierarchy of controls · HSE slip and trip factors · HSE barriers and cleaning

How can the ISO 45001 hierarchy of controls remove slip and trip hazards from workplace routes?

The hierarchy of controls in ISO 45001:2018 comes under Clause 8.1.2 (Eliminating hazards and reducing OH&S risks), which is located within Clause 8 ("Operation").

ESEAP: Elimination, Substitution, Engineering controls, Administrative controls and PPE. Control order: HSE hierarchy of controls and IOSH hierarchy of control guidance.

Worked activity: Wet leisure-centre entrance
Activity and exposure
Wet entrance at a public leisure centre during heavy rain.
Before work
Wet leaves and rainwater carried through an entrance onto a smooth floor; no mat change or drainage response.
During the activity
Close or physically separate the wet route, give a safe alternative, remove contamination and inspect matting and drainage.
Hold or stop
Do not reopen while the floor remains wet or the alternate route creates another hazard.
Hand-back and release
Repair the recurrent water source, choose suitable matting/flooring, brief cleaners and reopen after a dry-floor check.
Evidence to retain
Record weather trigger, barrier time, floor condition, repair owner, worker feedback and repeat incidents.
Full example
Read the activity, checks and hand-back in context
ESEAP mapping crosswalk: these are retained ERICPD source rows, mapped to the five ESEAP levels. Read the control-classification correction for mixed physical and administrative measures; six source rows do not mean six ESEAP levels.
Five-level control stage(s)Topic-specific exampleSource and full task context
Elimination

Remove recurring water entry at source where practicable.

Read the full task example, checks and stop points on this page. HSE hierarchy of controls · HSE slip and trip factors · HSE barriers and cleaning
Engineering controls / Administrative controls

Use suitable matting, drainage and safe cleaning.

Read the full task example, checks and stop points on this page. HSE hierarchy of controls · HSE slip and trip factors · HSE barriers and cleaning
Engineering controls

Prevent access while unsafe and provide an alternative route.

Read the full task example, checks and stop points on this page. HSE hierarchy of controls · HSE slip and trip factors · HSE barriers and cleaning
Engineering controls / Administrative controls

Repair floor and route defects.

Read the full task example, checks and stop points on this page. HSE hierarchy of controls · HSE slip and trip factors · HSE barriers and cleaning
PPE

Select suitable footwear for residual risk.

Read the full task example, checks and stop points on this page. HSE hierarchy of controls · HSE slip and trip factors · HSE barriers and cleaning
Administrative controls

Maintain competent cleaning, inspections and defect closure.

Read the full task example, checks and stop points on this page. HSE hierarchy of controls · HSE slip and trip factors · HSE barriers and cleaning

Applied case

Film and strapping are building up near packing. People are beginning to step around the waste. At handover, someone says that assigning an action owner is enough to restart. Decide what is still needed.

Compare your decision

The route remains clear during the continuing packing task and the collection arrangement is actually being used. Ask who owns the control and when it should be reviewed if the task changes.

The route remains clear during the continuing packing task and the collection arrangement is actually being used. Ask who owns the control and when it should be reviewed if the task changes. Ownership and training support the control but do not demonstrate its effectiveness.

Lesson 7

A gap in vehicle separation

Stop when the control no longer protects the journey.

Read the scene evidence

A temporary opening exposes the pedestrian area to the vehicle route. Ash has stopped the forklift.

Look at the scene, identify the hazardous condition and keep that separate from who is present or whether an injury has happened.

How the harm pathway develops

Vehicle movement and an open interface

The moving vehicle and its load can cause harm. The person is exposed through the failed separation.

Vehicle and pedestrian paths overlap

An opening, swept path or unprotected crossing can allow that movement to reach someone.

Impact, trapping or crushing

Severe harm can occur even when a vehicle is slow or familiar. Do not infer safety from eye contact.

Compare the work arrangements

ArrangementWhat changes exposure?
Uncontrolled arrangementA barrier opening leaves the actual journey unprotected at a conflict point.
Protected arrangementConflicting movements are held until suitable protection is restored and the complete route checked.

Select controls by how they prevent harm

Keep conflicting movements stopped and ask the responsible person to control access and restore effective separation. Keep those immediate controls while considering stronger source or task changes.

Use the five-level hierarchy below. Inspection, instruction and supervision sustain every chosen control; they do not replace physical prevention.

Control levelApplication to this case
EliminationWhere practicable, move pedestrian access away from vehicle operations so the crossing is unnecessary.
SubstitutionNo separate substitution is claimed here. Compare suitable alternatives and check for new risks before changing the task.
Engineering controlsRestore suitable fixed separation and protected access for the actual vehicle envelope.
Administrative controlsCheck route compatibility, visibility, barrier condition and safe bay access. Inspect after impacts or changes and prevent informal shortcuts.
PPEHigh-visibility clothing assists visibility for residual exposure; it is not separation.

Verify, communicate and hand back

The complete pedestrian journey and actual vehicle movement remain separated before conflicting movements restart. Ask who owns the control and when it should be reviewed if the task changes.

Explain the task-specific evidence, who must act and what restriction remains until it is resolved. A closed action or a course badge cannot establish a live site condition.

What is workplace transport and how does it cause harm?

Workplace transport is the movement and use of vehicles or mobile plant at work. Keep people out of vehicle paths, choose suitable vehicles and make sure drivers can operate them safely in the actual setting.

Best-practice guide · six simple steps

Best-practice guide: Safe Movement of People and Vehicles in the Workplace

Start with the key actions, then explore value, a workplace example, harm, stronger controls and further help. Choose a step or use Previous and Next; the guide does not advance automatically.

Step 1 of 6 · StartThis cardPNG imagePDFView full sizeAll 6 cardsPNG images (ZIP)PDF (6 pages)

Keep one card or the full set for social sharing, team briefings and learning. Each PDF contains one card per page. Read the full topic for explanations, questions and source links.

Read all six steps as text
  1. 1. What is workplace transport and how does it cause harm?

    Workplace transport is the movement and use of vehicles or mobile plant at work.

    • Avoid / redesign: Move pedestrian access and picking away from the loading route so the crossing is no longer needed.
    • Control the task: Install suitable fixed separation and protected crossing points; design gates and routes to keep people out of the truck envelope.
    • Verify before release: If the hazardous step remains, keep it within the task assessment and select the stronger feasible remaining controls.

    Workplace transport is the movement and use of vehicles or mobile plant at work. Keep people out of vehicle paths, choose suitable vehicles and make sure drivers can operate them safely in the actual setting. Workplace transport is the movement and use of vehicles and mobile plant in yards, warehouses, depots, forecourts and other work areas.

    Apply it: Which part of this plan would you check at the workface before authorising the task?

    Read this part of the full topicOpen the full topicHSE workplace transport introduction (Great Britain)HSE HSG136 third edition (Great Britain)Official task guidance: www.hse.gov.uk (Great Britain)
  2. 2. Turn safe movement of people and vehicles in the workplace knowledge into a decision

    Use the evidence to improve the actual work arrangement.

    • Change at source: Move pedestrian access and picking away from the loading route so the crossing is no longer needed.
    • Make it observable: If the hazardous step remains, keep it within the task assessment and select the stronger feasible remaining controls.
    • Keep useful evidence: Retain the delivery instructions, load information, route/bay assessment, equipment checks, driver briefing, defects and any changed-method authorisation.

    Workplace transport is the movement and use of vehicles and mobile plant in yards, warehouses, depots, forecourts and other work areas. People can be struck or crushed where their routes meet moving vehicles; unstable loads, falls from vehicles and overturns cause further serious injuries. Retain the delivery instructions, load information, route/bay assessment, equipment checks, driver briefing, defects and any changed-method authorisation.

    Apply it: What evidence would show that the change improves this task, rather than only completing a record?

    Read this part of the full topicOpen the full topicOfficial task guidance: www.hse.gov.uk (Great Britain)HSE delivering safely (Great Britain)HSE loading and unloading (Great Britain)
  3. 3. A pallet delivery in a busy warehouse yard

    Fictional example: a practical application of the existing topic lesson.

    • Setting: Receive and unload identified palletised packaged goods from a rigid lorry using a suitable counterbalance forklift.
    • Act: The supervisor checks the bay surface, lighting, pedestrian barriers, clear route and local unloading plan.
    • Hold / review: Hold an unbooked vehicle, changed vehicle type, unknown load mass, damaged pallet or shifted load for the supervisor and, when needed, supplier or competent specialist.

    The operator follows the agreed sequence within the equipment limits. Keep people out of the load and vehicle operating zone. The loading team confirms people and equipment are clear, remaining load is secure, doors and vehicle equipment are safe and the exit route is available.

    Apply it: At which point would you hold this example, and what evidence would allow it to proceed?

    Read this part of the full topicOpen the full topicHSE delivering safely (Great Britain)HSE loading and unloading (Great Britain)HSE HSG136 third edition (Great Britain)
  4. 4. Mechanism, likely harm, warning and stop decision

    Connect the task, the route to the person and the control that can fail.

    • Exposure route 1: Vehicle enters a pedestrian path; impact, crushing or run-over can cause major fractures, internal injury or death.
    • Exposure route 2: Load shifts or falls during travel or unloading; impact can cause head injury, crush injury or death.
    • Exposure route 3: A person climbs onto or leaves a vehicle; slipping or falling can cause fractures, head or spinal injury.

    Exposure route 1: Vehicle enters a pedestrian path; impact, crushing or run-over can cause major fractures, internal injury or death. Exposure route 2: Load shifts or falls during travel or unloading; impact can cause head injury, crush injury or death. Exposure route 3: A person climbs onto or leaves a vehicle; slipping or falling can cause fractures, head or spinal injury.

    Apply it: Who could be exposed, including other trades, cleaners, maintainers and people nearby?

    Read this part of the full topicOpen the full topicHSE workplace transport risk assessment (Great Britain)HSENI workplace transport risk assessment (Northern Ireland)HSE loading and unloading (Great Britain)
  5. 5. Choose controls for safe movement of people and vehicles in the workplace

    Start with the stronger practicable options and verify their effect.

    • Elimination: Move pedestrian access and picking away from the loading route so the crossing is no longer needed.
    • Engineering controls: Replace reversing-dependent unloading with a suitable drive-through arrangement after checking vehicle swept paths.
    • Engineering controls: Install suitable fixed separation and protected crossing points; design gates and routes to keep people out of the truck envelope.
    • Engineering controls: Check barrier strength, visibility, impact exposure and safe bay access for the actual trucks and loads.
    • Administrative controls: Agree delivery slots, driver waiting positions and crossing rules; stop vehicle movement before anyone enters the loading zone.

    Elimination: Move pedestrian access and picking away from the loading route so the crossing is no longer needed. Engineering controls: Replace reversing-dependent unloading with a suitable drive-through arrangement after checking vehicle swept paths. Engineering controls: Install suitable fixed separation and protected crossing points; design gates and routes to keep people out of the truck envelope. Engineering controls: Check barrier strength, visibility, impact exposure and safe bay access for the actual trucks and loads. Administrative controls: Agree delivery slots, driver waiting positions and crossing rules; stop vehicle movement before anyone enters the loading zone. Read the full control table for qualifications, ownership and verification. Use the actual task and applicable jurisdiction; existing technical approval remains unchanged.

    Apply it: Which stronger option can be used here, and who will verify it before accepting the remaining risk?

    Read this part of the full topicOpen the full topicOfficial task guidance: www.hse.gov.uk (Great Britain)
  6. 6. Use the full safe movement of people and vehicles in the workplace lesson

    Follow the official sources below and retain the task-specific evidence.

    • Official guidance: HSE workplace transport introduction
    • Official guidance: HSE HSG136 third edition
    • Task decision: Retain the delivery instructions, load information, route/bay assessment, equipment checks, driver briefing, defects and any changed-method authorisation.

    Apply it: Which official source and full-topic section will you use to resolve the next decision?

    Read this part of the full topicOpen the full topicHSE workplace transport introduction (Great Britain)HSE HSG136 third edition (Great Britain)Official task guidance: www.hse.gov.uk (Great Britain)

Simplified learning guide. Use the full topic, current official guidance and the actual work arrangements. Workplace scenarios labelled fictional are illustrative examples.

A yard can feel familiar while containing lethal crush points. A driver may not see someone behind a load or trailer; a turning vehicle can sweep into space outside its wheel tracks; and a pedestrian beside a wall has nowhere to escape. A slowly moving vehicle can still trap or run over a person. Loads can fall, vehicles can overturn, and people can fall while getting on, off or working on them. See HSE workplace transport introduction for the relevant source and scope.

The useful organising model is safe site, safe vehicle and safe driver. The site includes activities such as reversing, loading, parking and coupling, as well as the layout. A good driver cannot make an unsuitable route or an unstable load safe through care alone. HSE workplace transport introduction and HSE HSG136 third edition explain this model.

This page covers yards, warehouses, depots, forecourts and similar workplaces, including visiting drivers, contractors and the public. Driving on public roads needs additional road-traffic controls; loading beside a workplace can involve both regimes. Construction, quarries, ports, automated vehicles and dangerous-goods transfer also need their specific guidance. Exhaust, noise and vibration can cause longer-term harm and need their own assessments alongside collision prevention.

How can the ISO 45001 hierarchy of controls prevent pedestrian contact with vehicles during loading-bay work?

Remove or reduce the hazard before relying on procedures or personal protection.

For safe movement of people and vehicles in the workplace, assess the actual task and first look for a way to remove the hazard. Where that is not possible, consider a safer substitute, engineered separation and then clear work procedures. PPE protects against remaining exposure; it does not make an uncontrolled task safe. HSE hierarchy of controls

The selected measures need a named owner, a usable stop point and a check that they still work when the task or conditions change. In Northern Ireland, verify the separate legal route and site instructions.

Deliveries cross a pedestrian route beside a loading bay; assess visiting drivers, picking tasks and peak movements.

How can the ERICPD hierarchy of controls prevent pedestrian contact with vehicles during loading-bay work?

ERICPD is a planning crossmap. Its prompts do not add a sixth rung or rank Isolate above engineering. Discipline verifies and sustains every control level.

Control levelControl for this activityOwner and verificationStop / restart decision
EliminateMove pedestrian access and picking away from the loading route so the crossing is no longer needed.

Basis: Official task guidance: www.hse.gov.uk

Transport owner observes the revised pedestrian journey and a representative delivery; confirm people no longer need to cross the truck route, including visiting drivers.If the hazardous step remains, keep it within the task assessment and select the stronger feasible remaining controls.
Reduce, including substitutionReplace reversing-dependent unloading with a suitable drive-through arrangement after checking vehicle swept paths.

Basis: Official task guidance: www.hse.gov.uk

Transport designer trials the drive-through swept path with the actual vehicle and checks that a new blind crossing or reversing manoeuvre has not been introduced.Reject an alternative if its performance is unproved or its new hazards are unresolved.
IsolateInstall suitable fixed separation and protected crossing points; design gates and routes to keep people out of the truck envelope.

Basis: Official task guidance: www.hse.gov.uk

Supervisor checks the actual boundary, affected people and connected work; verify separation or isolation before allowing access.Hold or stop for damaged barrier, pedestrian intrusion or an unplanned reversing manoeuvre.
Control: physical safeguardsCheck barrier strength, visibility, impact exposure and safe bay access for the actual trucks and loads.

Basis: Official task guidance: www.hse.gov.uk

Competent equipment/process owner checks route separation, crossing sightlines and representative truck movements.Hold or stop for damaged barrier, pedestrian intrusion or an unplanned reversing manoeuvre.
Control: work method and responseAgree delivery slots, driver waiting positions and crossing rules; stop vehicle movement before anyone enters the loading zone.

Basis: Official task guidance: www.hse.gov.uk

Supervisor confirms the work limits, competent cover, communication and stop/restart authority with the people doing this activity.Hold work when the agreed limits, competent cover or effective communication cannot be maintained.
PPEUse suitable visibility and foot protection for residual exposure; high-visibility clothing does not prevent a collision.

Basis: Official task guidance: www.hse.gov.uk

Assessor confirms whether personal protection is needed and checks suitability, condition, compatibility and any required fit evidence.Do not use unsuitable protection or rely on PPE to continue after an essential source control fails.
DisciplineInspect barriers after impacts, prevent informal shortcuts and verify the route at busy periods.

Basis: Official task guidance: www.hse.gov.uk

Release only after transport manager verifies routes with drivers and pedestrians. Retain verification and unresolved restrictions at handover.Keep the task on hold until required reinstatement evidence and unresolved defects are accepted by the responsible owner.

How can the ISO 45001 hierarchy of controls prevent pedestrian contact with vehicles during loading-bay work?

The hierarchy of controls in ISO 45001:2018 comes under Clause 8.1.2 (Eliminating hazards and reducing OH&S risks), which is located within Clause 8 ("Operation").

ESEAP: Elimination, Substitution, Engineering controls, Administrative controls and PPE. Control order: HSE hierarchy of controls and IOSH hierarchy of control guidance.

Five-level control stage(s)Control for this activityOwner and verificationStop / restart decision
EliminationMove pedestrian access and picking away from the loading route so the crossing is no longer needed.

Basis: Official task guidance: www.hse.gov.uk

Transport owner observes the revised pedestrian journey and a representative delivery; confirm people no longer need to cross the truck route, including visiting drivers.If the hazardous step remains, keep it within the task assessment and select the stronger feasible remaining controls.
Engineering controlsReplace reversing-dependent unloading with a suitable drive-through arrangement after checking vehicle swept paths.

Basis: Official task guidance: www.hse.gov.uk

Transport designer trials the drive-through swept path with the actual vehicle and checks that a new blind crossing or reversing manoeuvre has not been introduced.Reject an alternative if its performance is unproved or its new hazards are unresolved.
Engineering controlsInstall suitable fixed separation and protected crossing points; design gates and routes to keep people out of the truck envelope.

Basis: Official task guidance: www.hse.gov.uk

Supervisor checks the actual boundary, affected people and connected work; verify separation or isolation before allowing access.Hold or stop for damaged barrier, pedestrian intrusion or an unplanned reversing manoeuvre.
Engineering controlsCheck barrier strength, visibility, impact exposure and safe bay access for the actual trucks and loads.

Basis: Official task guidance: www.hse.gov.uk

Competent equipment/process owner checks route separation, crossing sightlines and representative truck movements.Hold or stop for damaged barrier, pedestrian intrusion or an unplanned reversing manoeuvre.
Administrative controlsAgree delivery slots, driver waiting positions and crossing rules; stop vehicle movement before anyone enters the loading zone.

Basis: Official task guidance: www.hse.gov.uk

Supervisor confirms the work limits, competent cover, communication and stop/restart authority with the people doing this activity.Hold work when the agreed limits, competent cover or effective communication cannot be maintained.
PPEUse suitable visibility and foot protection for residual exposure; high-visibility clothing does not prevent a collision.

Basis: Official task guidance: www.hse.gov.uk

Assessor confirms whether personal protection is needed and checks suitability, condition, compatibility and any required fit evidence.Do not use unsuitable protection or rely on PPE to continue after an essential source control fails.
Administrative controlsInspect barriers after impacts, prevent informal shortcuts and verify the route at busy periods.

Basis: Official task guidance: www.hse.gov.uk

Release only after transport manager verifies routes with drivers and pedestrians. Retain verification and unresolved restrictions at handover.Keep the task on hold until required reinstatement evidence and unresolved defects are accepted by the responsible owner.

Applied case

A temporary opening exposes the pedestrian area to the vehicle route. Ash has stopped the forklift. At handover, someone says that assigning an action owner is enough to restart. Decide what is still needed.

Compare your decision

The complete pedestrian journey and actual vehicle movement remain separated before conflicting movements restart. Ask who owns the control and when it should be reviewed if the task changes.

The complete pedestrian journey and actual vehicle movement remain separated before conflicting movements restart. Ask who owns the control and when it should be reviewed if the task changes. Ownership and training support the control but do not demonstrate its effectiveness.

Lesson 8

Learning from an earlier load shift

Turn an account into a verifiable improvement.

Read the scene evidence

Nia reports a load shift that narrowly missed a colleague. Immediate danger is already controlled; the team needs to learn what allowed it.

Look at the scene, identify the hazardous condition and keep that separate from who is present or whether an injury has happened.

How the harm pathway develops

Unstable load or unsafe delivery arrangement

Identify the actual equipment, load and work conditions rather than treating a person as the hazard.

Load movement reaches a person’s space

Gather facts about how the load moved and how someone could have been exposed. Separate facts from assumptions.

Potential impact or crushing

No injury occurred in this event. Potential consequences and recurrence still justify proportionate investigation.

Compare the work arrangements

ArrangementWhat changes exposure?
Uncontrolled arrangementThe same delivery arrangement is used again after only issuing a reminder.
Protected arrangementEvidence leads to a suitable corrective action, a named owner and a later effectiveness check.

Select controls by how they prevent harm

After protecting people, listen fairly, record necessary facts and pass the report to the responsible investigation lead. Keep those immediate controls while considering stronger source or task changes.

Use the five-level hierarchy below. Inspection, instruction and supervision sustain every chosen control; they do not replace physical prevention.

Control levelApplication to this case
EliminationChange the arrangement to remove the underlying hazardous exposure where practicable.
SubstitutionNo separate substitution is claimed here. Compare suitable alternatives and check for new risks before changing the task.
Engineering controlsKeep people separated from load movement and the controlled work area.
Administrative controlsSelect actions that match the established causes and specify ownership, timing and evidence. Check implementation and later effectiveness across similar work, not just whether a report is signed.
PPEUse appropriate residual protection without treating it as a substitute for a stable system.

Verify, communicate and hand back

There is evidence of implementation and a later effectiveness review; a reminder or closed form alone is insufficient. Ask who owns the control and when it should be reviewed if the task changes.

Explain the task-specific evidence, who must act and what restriction remains until it is resolved. A closed action or a course badge cannot establish a live site condition.

Why should accidents, incidents and near misses be investigated?

Investigation prevents repeat harm by turning an unwanted event into evidence, learning and stronger controls.

The best investigations are not paperwork exercises carried out after the real work has moved on. They are part of risk management. They test whether the risk assessment matched the real task, whether supervision and competence were sufficient, whether equipment and workplace conditions were suitable, and whether earlier warning signs were missed.

Investigation also protects trust. Workers are more likely to report near misses and speak openly when they see that investigations are fair, factual and aimed at improving the work system. Where the process feels like blame, people hide weak signals and the organisation loses the chance to learn while the consequences are still small.

For serious events, investigation sits alongside legal reporting, regulator contact, victim and family communication, insurance, employment processes and possible criminal or civil proceedings. That is why the process must be controlled, documented and competent from the start.

How should corrective and preventive actions be selected and verified?

Actions should match the causes, reduce the risk and be checked after completion to prove they work.

An action is not strong simply because it is quick. Re-training everyone after every event may look decisive, but it often avoids the harder questions about equipment, design, workload, maintenance, supervision and planning. A good investigator asks what action would have prevented the event even if a person made a foreseeable mistake.

Corrective actions should be written in a way that can be closed properly: what will change, who owns it, when it is due, what evidence proves completion, and how effectiveness will be checked. For serious events, actions should also be reviewed across similar areas so the organisation does not fix one location while leaving the same weakness elsewhere.

Corrective action strength and verification
Action type Example Investigation quality check
Eliminate the hazard or task Remove the need for the activity, exposure or energy release that caused the event. Strongest action where reasonably practicable; check whether the work can be designed out or substituted.
Engineering or design change Guarding, interlocks, segregation, extraction, automation, fail-safe design, safer access, alarm redesign or physical modification. Strong because it reduces reliance on memory and supervision.
Isolation, access control or permit change Lockout, exclusion zones, barriers, permit-to-work controls, handover improvements or contractor coordination. Useful where people need to be separated from energy, vehicles, substances or simultaneous work.
Maintenance, inspection or procurement change Replace defective equipment, change inspection frequency, specify safer equipment or remove unsuitable items from stores. Useful where deterioration, wrong equipment or poor purchasing contributed.
Procedure, briefing or training update Clarify the safe system, update training and brief those affected. Necessary where knowledge was weak, but should not be the only action if the work design remains poor.
Behaviour-only reminder Posters, toolbox talks or reminders to take care. Weak unless it supports stronger controls and there is evidence that the task, equipment and supervision are also improved.

Applied case

Nia reports a load shift that narrowly missed a colleague. Immediate danger is already controlled; the team needs to learn what allowed it. At handover, someone says that assigning an action owner is enough to restart. Decide what is still needed.

Compare your decision

There is evidence of implementation and a later effectiveness review; a reminder or closed form alone is insufficient. Ask who owns the control and when it should be reviewed if the task changes.

There is evidence of implementation and a later effectiveness review; a reminder or closed form alone is insufficient. Ask who owns the control and when it should be reviewed if the task changes. Ownership and training support the control but do not demonstrate its effectiveness.

Lesson 9

Shift handover: connect the hazards

Defend the stopping condition and the evidence needed for release.

Reconstruct the whole task

The afternoon picking wave is behind schedule. A leaking package, abandoned wrapping and a pallet in the pedestrian route appear unrelated until the same picker must pass all three.

The spill is cleaned but the source is still leaking, wrapping remains in the diversion and the blocked crossing forces people into the forklift route.

Keep the affected route restricted, deal with the source and the diversion, and verify the whole pedestrian journey before reopening.

Build an evidence-led handover

ItemWhat the receiver needs
Task and locationDispatch, picking and everyday warehouse safety — identify the affected people and boundaries.
Actual conditionThe spill is cleaned but the source is still leaking, wrapping remains in the diversion and the blocked crossing forces people into the forklift route.
Control and current restrictionKeep the affected route restricted, deal with the source and the diversion, and verify the whole pedestrian journey before reopening.
Verification and ownerName the responsible role and the task-specific evidence. Keep unresolved matters open.

Use the documents as working tools

Map the task, people, exposure pathway, existing controls, missing evidence and review trigger. Use the fictional course case.

Prepare a five-minute task briefing. Ask a scenario question and check understanding, rather than relying on an attendance signature.

Find who owns the control, who can authorise release and how a worker escalates a defect. Check the actual local arrangements.

Compare a claim with an observation, a relevant record and a competent explanation. Record open actions and verify closure.

Why should accidents, incidents and near misses be investigated?

Investigation prevents repeat harm by turning an unwanted event into evidence, learning and stronger controls.

The best investigations are not paperwork exercises carried out after the real work has moved on. They are part of risk management. They test whether the risk assessment matched the real task, whether supervision and competence were sufficient, whether equipment and workplace conditions were suitable, and whether earlier warning signs were missed.

Investigation also protects trust. Workers are more likely to report near misses and speak openly when they see that investigations are fair, factual and aimed at improving the work system. Where the process feels like blame, people hide weak signals and the organisation loses the chance to learn while the consequences are still small.

For serious events, investigation sits alongside legal reporting, regulator contact, victim and family communication, insurance, employment processes and possible criminal or civil proceedings. That is why the process must be controlled, documented and competent from the start.

Applied case

The spill is cleaned but the source is still leaking, wrapping remains in the diversion and the blocked crossing forces people into the forklift route.

Compare your decision

Keep the affected route restricted, deal with the source and the diversion, and verify the whole pedestrian journey before reopening.

Keep the affected route restricted, deal with the source and the diversion, and verify the whole pedestrian journey before reopening.

Lesson 10

Your workplace transfer challenge

Turn one lesson into a bounded check with an owner and a review trigger.

Prepare a useful task briefing

Plan picking around people, stock and changing floor conditions.

Use the printable course workbook to describe one fictional task. State who could be exposed, the harmful mechanism, a higher-level control, the immediate restriction and the evidence needed to close the action.

Test understanding and inspect the arrangement

Report a near miss factually and verify that the route is safe before reopening.

Ask the team what they would do if the control failed. Compare their answer with the actual arrangements and the source teaching. Check both what people understand and whether the physical control works.

Keep learning and operational authority clear

Independent warehouse awareness and decision practice for a GB baseline; check corresponding Northern Ireland duties and site arrangements. Completion is not practical competence, a licence or authority for specialist work.

The workbook is a practice document. Use the authorised workplace system for real risk assessments, permits, defect reports and audits. Video demonstrations can be added later; no missing video is required to complete this course.

Applied case

You are asked to prepare a toolbox talk and a check for the next shift. The current document says only: be more careful.

Compare your decision

Identify the task, responsible role, required evidence, restriction and trigger for review.

A useful action connects the work to its owner, evidence and a clear decision boundary.