SHAREhub

Aerospace manufacturing safety / Aerospace stores, materials and component logistics

Aerospace manufacturing safety · SH-AERO-03

Aerospace stores, materials and component logistics

Existing actual Aerospace manufacturing model view. The written lesson supplies the case facts.
Illustrative workplace context for this course.

Free online training · Approximate learning time: 130–200 minutes · Self-paced

Protect people and preserve identity across every support and handover.

£0Free training
Approx. 130–200 minutesEstimated active learning
14 lessons5 modules
20 questionsFinal assessment
Open this course in the LMS →

Full public teaching and readers are free without an account. A free learner account is required for saved LMS progress and recorded assessment. Completion and any course-completion certificate depend on the configured LMS conditions.

Who this course is for

Stores, receiving, material-control, logistics, dispatch teams and supervisors.

Follow stock, chemicals and finished components through a connected stores-to-dispatch journey. Distinguish physical safety, substance identity, material conformity and receiving acceptance.

Awareness in an original fictional aerospace manufacturing and airport-interface site. GB occupational guidance has separate NI routes; environmental duties depend on the UK nation and permit. This course does not confer engineering, aircraft maintenance, product-release, lifting, rescue, driving or airside authorisation.

Learning outcomes

Course outline

Module 1

Protect storage and picking

  1. Protect people before investigating damaged storageKeep a potentially unstable storage bay out of use while the defect is assessed through the responsible system.
  2. Design picking around the forklift operationRemove predictable pedestrian entry into plant space instead of relying on mutual attention.
Module 2

Understand material and support behaviour

  1. Support long stock through storage and handlingAssess sharp edges, flexibility and load movement as well as weight when selecting the handling method.
  2. Keep chemical identity and material status distinctControl unknown substances and preserve traceability without confusing a quality status with a chemical-risk assessment.
Module 3

Control handling equipment

  1. Assess the trolley and its complete routeTreat poor equipment condition and thresholds as part of handling risk rather than a reason to push harder.
  2. Use separate dispatch gates for safety and conformityRequire load security and receiving arrangements as well as the applicable product-release evidence.
  3. Damaged rack with high stored loadsKeep people and loading operations away from a rack whose integrity is uncertain.
  4. Forklift and pedestrian interfaceStop the truck when pedestrian separation is lost.
  5. Long stock and sheet handlingKeep clear of falling stock; stop when support, grip or load identity is uncertain.
Module 4

Separate identity and release evidence

  1. Chemical segregation and material traceabilityDo not use or mix material whose identity or compatibility is unresolved.
  2. Trolley movements and manual handlingDo not push through a defective aid or an uncontrolled load movement.
  3. Loading a component for dispatchHold dispatch while support, restraint, access or release authority is unresolved.
Module 5

Coordinate dispatch acceptance

  1. Keep an urgent component under control from store to carrierMaintain separate storage, chemical, handling and dispatch decisions in a combined logistics case.
  2. Take a verified action into the workplaceConnect one actual task to an owner, evidence and a clear release or escalation decision.

Activities, model practice and assessment

Work through 5 required applied activities and 3 model-practice pauses, with explanatory feedback and independent lesson decisions. Complete 6 distinct model mission sequences across those pauses. Use the actual fictional aerospace manufacturing model or its equivalent accessible route to complete the required decision sequences; launching the model alone does not complete practice.

The 20-question assessment requires at least 80% plus every designated critical safety answer. Complete the required activities, practice and lesson checks. Points and badges cannot offset a critical safety error.

Use the LMS for confirmed save/resume and recorded results. Any certificate follows its configured passed-completion and grade conditions.

Open the public interactive practice copy; public practice is separate from the LMS record.

Sources and learning provenance

Original fictional cases are paired with public SHAREhub teaching and structured topic records. Use the applicable jurisdiction and primary guidance for live work.

Topic sections, source identities and versions
Public topicChunk and versionJurisdiction and sources
work-equipment-lifting-equipment-and-pressure-systems · first-actionswork-equipment-lifting-equipment-and-pressure-systems--first-actions
3.0
Great Britain, Northern Ireland
source-indg229, source-puwer_use, source-gb_puwer, source-ni_puwer, source-l22, source-introduction, source-gb_market, source-ni_market, source-sector_products
workplace-transport-and-work-related-driving · control-prioritiesworkplace-transport-and-work-related-driving--control-priorities
4.1
Great Britain, Northern Ireland
source-hse_ppe_hierarchy, source-hse_reversing, source-hse_road, source-hse_transport, source-hse_safeplace, source-hse_safedriver, share-hierarchy-iosh
manual-handling · technical-modelmanual-handling--technical-model
2.0
Great Britain, Northern Ireland
hse-l23, hse-manual, hseni-manual
load-handling-equipment-and-lifting-operations · non-routine-load-decisionload-handling-equipment-and-lifting-operations--non-routine-load-decision
2026-10-02-additive-1
Great Britain
load-handling-equipment-and-lifting-operations-src-01, load-handling-equipment-and-lifting-operations-src-03, load-handling-equipment-and-lifting-operations-src-10
chemical-classification-reach-clp-and-safety-data-sheets · sdschemical-classification-reach-clp-and-safety-data-sheets--sds
20261016-letter-review-1
Great Britain
source-class-hse-sds, source-class-hse-coshh
chemical-compatibility-and-inadvertent-mixing · transferchemical-compatibility-and-inadvertent-mixing--transfer
20261016-letter-review-1
Great Britain, United States
source-mix-hse-waste, source-mix-csb-mgpi
manual-handling · failure-modesmanual-handling--failure-modes
2.0
Great Britain, Northern Ireland
hse-l23, hse-toolfaq
maintenance-inspection-and-testing-of-work-equipment-and-machinery · defectsmaintenance-inspection-and-testing-of-work-equipment-and-machinery--defects
2.0
Great Britain, Northern Ireland
hse-maint, hse-loler-exam, m-review-pssr
load-handling-equipment-and-lifting-operations · evidenceload-handling-equipment-and-lifting-operations--evidence
2026-10-02-additive-1
Great Britain, Northern Ireland
load-handling-equipment-and-lifting-operations-src-01
workplace-transport-and-work-related-driving · assuranceworkplace-transport-and-work-related-driving--assurance
4.1
Great Britain, Northern Ireland
source-hse_transport, source-ni_transport
work-equipment-lifting-equipment-and-pressure-systems · three-regime-decisionwork-equipment-lifting-equipment-and-pressure-systems--three-regime-decision
3.0
Great Britain, Northern Ireland
source-puwer_overview, source-gb_puwer, source-ni_puwer, source-gb_loler, source-ni_loler, source-gb_pssr, source-ni_pssr, source-pressure_supply
workplace-transport-and-work-related-driving · technical-modelworkplace-transport-and-work-related-driving--technical-model
4.1
Great Britain, Northern Ireland
source-hse_safeplace, source-hse_transport, source-hse_reversing, source-hse_loading
chemical-compatibility-and-inadvertent-mixing · assessmentchemical-compatibility-and-inadvertent-mixing--assessment
20261016-letter-review-1
Great Britain, Northern Ireland
source-mix-hse-waste, source-mix-hse-sds, source-mix-hse-comah, source-mix-hseni-coshh
load-handling-equipment-and-lifting-operations · worked-exampleload-handling-equipment-and-lifting-operations--worked-example
2026-10-02-additive-1
Great Britain, Northern Ireland
load-handling-equipment-and-lifting-operations-src-01
manual-handling · evidence-packmanual-handling--evidence-pack
2.0
Great Britain, Northern Ireland
hse-l23, hse-mac
work-equipment-lifting-equipment-and-pressure-systems · assurancework-equipment-lifting-equipment-and-pressure-systems--assurance
3.0
Great Britain, Northern Ireland
source-inspection, source-training, source-l22, source-hseni_devices, source-indg229

Course SH-AERO-03 · version 2026.10.20.2. .

Questions about this course

Is this training free?

Full public teaching and readers are free without an account. A free learner account is required for saved LMS progress and recorded assessment. Completion and any course-completion certificate depend on the configured LMS conditions.

How long should I allow?

Approximately 130–200 minutes, including teaching, lesson checks, required activities, model or accessible practice and one assessment attempt. Individual pace, review and retries vary. Save and resume in the LMS.

Can I learn without a 3D-capable browser?

Yes. The complete HTML reader provides the teaching. Required model practice has an equivalent accessible decision route in the interactive course. Use the LMS route for recorded learning.

What is required to pass?

Complete the required learning, activities, practice and lesson decisions. The 20-question final assessment requires at least 80% plus every designated critical safety answer. Points cannot compensate for a critical safety error. Follow the feedback before retrying.

Does this authorise aerospace operations?

Awareness in an original fictional aerospace manufacturing and airport-interface site. GB occupational guidance has separate NI routes; environmental duties depend on the UK nation and permit. This course does not confer engineering, aircraft maintenance, product-release, lifting, rescue, driving or airside authorisation. This independent course does not award an external qualification or replace competent task assessment, practical training or site authorisation.

Which manual handling assessments will you learn to use?

TILEO helps you review the wider task; MAC supports appropriate lifting, carrying and team handling of inanimate loads; RAPP supports appropriate pushing and pulling.

These aids support the activity assessment. Repetitive upper-limb work may need ART; variable or complex tasks may need other HSE tools or a fuller competent assessment. Mechanical lifting, stored energy, equipment safety and health decisions retain their separate controls. A low factor score, a downloaded report or completion of this course does not approve the work.

This additional teaching takes about 2–5 minutes, in addition to the course estimate. Optional reading and workplace assessment take additional time.

Learn how to select the method, use separate reports for mixed tasks, add a company logo and keep editable Word or PDF records. After a saved pass, the course offers a direct route to the assessment tools. Workplace assessment and practical competence remain separate from course completion.

Read the assessment tools and records guide