SHAREhub

Farm safety / Cattle handling, safer manual work and infection prevention

Farm safety · SH-FARM-02

Cattle handling, safer manual work and infection prevention

Illustrative farm context with a tractor, farm buildings and livestock
Illustrative workplace context for this course.

Free online training · Approximate learning time: 100–160 minutes · Self-paced

Design the handling system around the animal, task and protected worker

£0Free training
Approx. 100–160 minutesEstimated active learning
13 lessons5 modules
20 questionsFinal assessment
Open this course in the LMS →

Full public teaching and readers are free without an account. A free learner account is required for saved LMS progress and recorded assessment. Completion and any course-completion certificate depend on the configured LMS conditions.

Who this course is for

Stock workers, farm supervisors, visiting veterinary teams and staff supporting cattle handling.

Work through cattle restraint, maternal behaviour, collecting-pen escape, calf movement and dirty-to-clean hygiene. The cases develop protective decisions and coordinated work; they do not teach veterinary treatment or qualify a learner to handle livestock.

Great Britain farm-work awareness. Confirm the relevant national fire, environmental and pesticide route. Specialist livestock, machinery, electrical, work-at-height, pesticide, confined-space and rescue tasks require their actual competent assessment and authorisation; this course confers none.

Learning outcomes

Course outline

Module 1

Understand animal movement

  1. Restraint must suit the animal and the taskExplain why familiar animals still need suitable handling facilities.
  2. A cow and calf change the approach decisionRecognise protective behaviour without provoking or testing the animal.
Module 2

Protect treatment and escape

  1. An escape route must remain availableAssess the handler’s position as cattle and gates move.
  2. Redesign calf movement before choosing a liftAvoid awkward handling while keeping animal and worker protected.
Module 3

Redesign handling and hygiene

  1. Animal contact continues on hands and clothingInterrupt contamination between stock work and clean activities.
  2. A handling session needs a coordinated releaseVerify people, facilities, animal movement and hygiene together.
  3. Use a suitable cattle handling systemA routine treatment still needs task-suitable restraint.
  4. Plan around protective maternal behaviourManage the current animal and task, including changes after calving.
  5. Keep an escape route during cattle movementAn escape provision only works when it is usable during the actual movement.
Module 4

Practise cattle-area decisions

  1. Avoid lifting unpredictable live loadsDesign the transfer around the animal rather than forcing the animal through poor access.
  2. Break the contamination route to welfareHygiene needs facilities, separation and a workable routine together.
Module 5

Verify the next handling session

  1. Treatment day: protect the animal-handling chainResolve several interacting gaps before cattle treatment begins.
  2. Take a verified action into the workplaceConnect one actual task to an owner, evidence and a clear release or escalation decision.

Activities, model practice and assessment

Work through 5 required applied activities and 3 model-practice pauses, with explanatory feedback and independent lesson decisions. Complete 5 distinct model mission sequences across those pauses. Use the actual fictional mixed farm model or its equivalent accessible route to complete the required decision sequences; launching the model alone does not complete practice.

The 20-question assessment requires at least 80% plus every designated critical safety answer. Complete the required activities, practice and lesson checks. Points and badges cannot offset a critical safety error.

Use the LMS for confirmed save/resume and recorded results. Any certificate follows its configured passed-completion and grade conditions.

Open the public interactive practice copy; public practice is separate from the LMS record.

Sources and learning provenance

Original fictional cases are paired with public SHAREhub teaching and structured topic records. Use the applicable jurisdiction and primary guidance for live work.

Topic sections, source identities and versions
Public topicChunk and versionJurisdiction and sources
hazard-identification-and-risk-assessment-foundations · barriershazard-identification-and-risk-assessment-foundations--barriers
Great Britain, Northern Ireland
source-hse-risk, source-hseni-risk, source-hse-hsg254
hazard-identification-and-risk-assessment-foundations · credible-scenarioshazard-identification-and-risk-assessment-foundations--credible-scenarios
Great Britain, Northern Ireland
source-hse-risk, source-hseni-risk
hazard-identification-and-risk-assessment-foundations · harm-chainhazard-identification-and-risk-assessment-foundations--harm-chain
Great Britain, Northern Ireland
source-hse-risk, source-hseni-risk, source-hse-hsg65
manual-handling · hierarchy-detailmanual-handling--hierarchy-detail
2.0
Great Britain, Northern Ireland
hse-ppe, hse-manual, hse-l23, hse-aids, hseni-manual, share-hierarchy-iosh
biological-agents-and-infection-risk-controls · controlsbiological-agents-and-infection-risk-controls--controls
20261016-letter-review-1
Great Britain, Northern Ireland
hse-biosafety-law, hse-incidental, hse-approved, gb-coshh
hazard-identification-and-risk-assessment-foundations · hierarchy-appliedhazard-identification-and-risk-assessment-foundations--hierarchy-applied
Great Britain, Northern Ireland
source-hse-risk, source-hseni-risk, share-hierarchy-hse
biological-agents-and-infection-risk-controls · zoonosesbiological-agents-and-infection-risk-controls--zoonoses
20261016-letter-review-1
Great Britain, Northern Ireland
hse-biosafety-law, hse-incidental, hse-approved
manual-handling · tile-tileo-tileemanual-handling--tile-tileo-tilee
2.0
Great Britain, Northern Ireland
hse-l23, hse-manual
hazard-identification-and-risk-assessment-foundations · risk-processhazard-identification-and-risk-assessment-foundations--risk-process
Great Britain, Northern Ireland
source-hse-risk, source-hseni-risk

Course SH-FARM-02 · version 2026.10.20.2. .

Questions about this course

Is this training free?

Full public teaching and readers are free without an account. A free learner account is required for saved LMS progress and recorded assessment. Completion and any course-completion certificate depend on the configured LMS conditions.

How long should I allow?

Approximately 100–160 minutes, including teaching, lesson checks, required activities, model or accessible practice and one assessment attempt. Individual pace, review and retries vary. Save and resume in the LMS.

Can I learn without a 3D-capable browser?

Yes. The complete HTML reader provides the teaching. Required model practice has an equivalent accessible decision route in the interactive course. Use the LMS route for recorded learning.

What is required to pass?

Complete the required learning, activities, practice and lesson decisions. The 20-question final assessment requires at least 80% plus every designated critical safety answer. Points cannot compensate for a critical safety error. Follow the feedback before retrying.

Does this authorise farm operations?

Great Britain farm-work awareness. Confirm the relevant national fire, environmental and pesticide route. Specialist livestock, machinery, electrical, work-at-height, pesticide, confined-space and rescue tasks require their actual competent assessment and authorisation; this course confers none. This independent course does not award an external qualification or replace competent task assessment, practical training or site authorisation.

Which manual handling assessments will you learn to use?

TILEO helps you review the wider task; MAC supports appropriate lifting, carrying and team handling of inanimate loads; RAPP supports appropriate pushing and pulling.

A live animal can move unpredictably. MAC and RAPP object-handling scores do not assess lifting or restraining an animal. Retain the course's animal-specific system, facilities and competent assessment. Use these tools only for appropriate inanimate-load work such as supplies or manually moved equipment; consider changes to the whole job before choosing a lift.

This additional teaching takes about 2–5 minutes, in addition to the course estimate. Optional reading and workplace assessment take additional time.

Learn how to select the method, use separate reports for mixed tasks, add a company logo and keep editable Word or PDF records. After a saved pass, the course offers a direct route to the assessment tools. Workplace assessment and practical competence remain separate from course completion.

Read the assessment tools and records guide