SHARE Knowledge Hub

Weight Management

Weight management is long-term support for health through a person’s circumstances, care and habits, rather than a workplace target weight. At work, missed breaks, limited food or water access, stigma and poorly fitting equipment can create health and safety barriers regardless of body size. Employers should change those work conditions and assess actual tasks and equipment, while personal diagnosis and treatment remain with health professionals.

Updated 2026-10-19GB and NI

Understanding Weight Management

Weight management is long-term support for health through a person’s circumstances, care and habits, rather than a workplace target weight. At work, missed breaks, limited food or water access, stigma and poorly fitting equipment can create health and safety barriers regardless of body size. Employers should change those work conditions and assess actual tasks and equipment, while personal diagnosis and treatment remain with health professionals.

Why this matters at work

Managers should state what has been observed, ask what support is needed, make the task safe and use ordinary healthcare or occupational-health routes. Do not tell a worker that a chair failed, manual-handling injury occurred, heat illness developed or PPE did not fit because of their weight without a proper equipment and system investigation. Individual factors may affect consequence, but they do not remove employer control duties.

Eating disorders are serious mental health conditions and can affect people at any body weight. Binge-eating disorder involves recurrent episodes of eating with loss of control; other conditions may involve restriction, purging, compensatory exercise or intense preoccupation with food and body. Appearance, BMI and workplace observation cannot confirm or rule out an eating disorder. Weight-loss praise, competitions and calorie surveillance may cause harm.

How organisations manage this in practice

Risk assessment should identify hazards and controls, not assign fault. A handling risk is controlled by avoiding, mechanising or reducing it; a seat or harness issue is controlled by suitable equipment; heat is controlled through environment, work and rest; fatigue through hours and workload. Advice to lose weight is not a present control and cannot justify exposure while change is awaited.

NICE uses overweight and obesity to describe levels of body mass associated statistically with increased health risk. It recommends person-centred language such as a person living with overweight or obesity and encourages asking which terms the person prefers. Weight management includes prevention of unhealthy weight gain, support for health and function, clinically supervised weight reduction where appropriate, weight maintenance, and management of treatment or surgery. It is not synonymous with appearance, thinness or a workplace target.

Senior review should ask whether work design supports meals, sleep, movement and safe treatment; whether people of varied sizes can use equipment and escape; whether health data is contained; whether commercial claims are controlled; and whether treatment or surgery returns are sustained. Set immediate escalation for serious clinical event, equipment overload, discriminatory decision, data breach or repeated missed breaks.

Make the break possible on every shift

A work barrier should be corrected without judging a person’s body or requiring a weight discussion. Suitable cover, facilities and equipment are work-design questions.

Workers choosing a balanced meal in a UK staff canteen. Photorealistic illustration.
Illustrative UK workplace scene. Read the practical checks below for responsibilities, evidence and limits. Download image · Download smaller image
  1. Find the operational barrier

    Check whether late-shift demand, closed facilities or missing relief prevents breaks and access to food, water or seating.

  2. Arrange workable cover

    The operating manager assigns trained relief and a brief handover without abandoning another critical duty.

  3. Check access and equipment

    Verify facilities, accessible seating and actual transfer or equipment requirements with users; a rating alone does not establish whole-configuration suitability.

  4. Keep choice separate

    Optional personal-health support does not determine access to work controls. Check the change with every shift and retain the relevant owner and review.

Read the complete task-specific control examples

ERICPD is a planning cross-map: Discipline verifies and sustains every control. ESEAP compares effectiveness. A label does not authorise the task; retain the owner, evidence and stop or change decision.

Weight Management · ERICPD

Eliminate
Remove an unnecessary manual carry or awkward climb by bringing the load or service to a suitable work position.
Reduce
Select a suitable handling aid, access method or seating with adequate rated capacity and adjustment for the intended users and task.
Isolate
Provide physical space, suitable access and stable equipment so users can perform the task without avoidable squeezing, overreaching or load instability.
Control
Plan reasonable work demands, recovery and welfare access; offer private support where requested.
PPE
Where the task needs PPE or respiratory protection, select a suitable size and compatible equipment; tight-fitting respiratory protection needs its own fit-testing decision.
Discipline
Maintain equipment and accessible welfare, review adjustments and close concerns about work design.

Weight Management · ESEAP

Elimination
Remove an unnecessary manual carry or awkward climb by bringing the load or service to a suitable work position.
Substitution
No separate substitute is specified. Compare suitable safer materials, equipment or processes; check new risks before any change.
Engineering controls
Select a suitable handling aid, access method or seating with adequate rated capacity and adjustment for the intended users and task.
Administrative controls
Plan reasonable work demands, recovery and welfare access; offer private support where requested.
PPE
Where the task needs PPE or respiratory protection, select a suitable size and compatible equipment; tight-fitting respiratory protection needs its own fit-testing decision.

What work barriers matter for weight-related wellbeing?

At work, identify barriers to food, water, rest, movement, safe equipment and fair participation. Correct the work condition and keep personal health assessment with a clinician.

A missed meal during an understaffed shift, a chair that does not fit and ridicule about someone’s body are three different problems. Correct the staffing, equipment or behaviour concerned. A wellbeing campaign cannot substitute for these changes.

How can work barriers and unsuitable equipment cause harm?

A person’s weight is not the workplace hazard. Missed relief, inadequate welfare, harmful exposure through ill-fitting protection, unstable equipment and coercive behaviour have different routes to harm. Identify the work condition, its exposure route and the safe action needed now.

Long-term health risk linked to body weight belongs in a personal clinical discussion. A task assessment instead asks what at work can cause injury or ill health, who encounters it, whether existing controls work and when the affected task must stop. Some outcomes are acute, such as a fall, heat illness or hazardous inhalation; others develop over repeated exposure or sustained distress.

Work condition, harm route and immediate action
Work condition and exposure routePossible injury or ill healthControl or stop decision
Late shift with no relief, drinking water or usable eating spaceRepeated missed breaks and heat or fatigue can reduce concentration and wellbeing; significant symptoms can make a safety-critical task unsafe.Provide relief, water and accessible facilities on the shift. Stop the affected task and seek appropriate help if the person cannot work safely.
Tight-fitting RPE does not seal for its wearerContaminant can bypass the facepiece and be inhaled. Depending on the substance, harm may be acute or develop after repeated exposure.Hold exposure work, select suitable RPE, arrange competent fit testing and require a wearer seal check each time it is put on.
Seat, access or assistance equipment lacks verified fit or capacityPoor stability or obstructed movement can cause a fall, strain or unsafe evacuation. A rating alone does not show the whole configuration is suitable.Hold use, verify manufacturer documentation, access, stability and planned assistance with the user; obtain a suitable alternative.
Public weight comment, pressure to disclose or compulsory programmeStigma can cause distress, deter reporting and expose sensitive health information. It does not control a task hazard.Stop the conduct or pressure, provide a private route and address the actual work or equipment barrier.

The mechanisms depend on the particular task and substance. Do not infer a diagnosis, ability or exposure limit from appearance or BMI.

How should a manager handle a work-related request?

Start with the work task and the support requested, not an assumption about a person’s weight or diagnosis.

Start with the work issue

Start with the work issue. Readable native learning diagram with labelled relationships and an accessible text equivalent.
Learning point: A private work-support discussion starts with the barrier and requested change. It does not require a body measurement or diagnosis.
Read the complete visual as text
  1. 1. PRIVATE CONTACT: Supervisor asks which task, chair, transfer or shift arrangement is difficult. Choose privacy and equal participation; appearance is not a trigger for a weight discussion.
  2. 2. ASK ABOUT THE BARRIER: Worker describes the change wanted. Record the task and functional issue; medical assessment stays with a competent clinician.
  3. 3. AGREE ACTION: Duty manager agrees an interim safe method, equipment advice where needed, action owner and review. Keep weight discussion optional.
  4. 4. CHECK THE RESULT: Review with the worker whether the work change helps. Record necessary work actions, not speculative diagnosis.

Work concern: immediate safety and respectful contact

Work concern: immediate safety and respectful contact. Readable native learning diagram with labelled relationships and an accessible text equivalent.
Learning point: Work concern: immediate safety and respectful contact. Use the named evidence and owner for the actual task; this illustration does not authorise work or change the current review status.
Read the complete visual as text
  1. Start: A worker reports a barrier, symptoms or equipment concern.
  2. Question 1: Immediate illness or danger? Decision owner: Supervisor / first aider.
  3. YES: Stop affected work, make safe and arrange appropriate first aid or urgent help. Sudden confusion needs immediate emergency assessment; use 999. Do not delay for discussion or self-driving. Owner: Supervisor / first aider. STOP / REFER → APPROPRIATE RESPONSE.
  4. NO: Check whether there is an actual work issue or support request. Owner: Supervisor / first aider. CONTINUE → QUESTION 2.
  5. UNKNOWN: Protect the affected person and task; obtain prompt competent first-aid or clinical advice, using emergency help if safety cannot be maintained. Owner: Supervisor / first aider. STOP / REFER → APPROPRIATE RESPONSE.
  6. Question 2: Is there a specific work issue or support request? Decision owner: Supervisor.
  7. YES: Discuss it privately, asking about task impact and preference. Owner: Supervisor. CONTINUE → QUESTION 3.
  8. NO: Do not act on appearance alone. Offer an accessible route for a future work concern. Owner: Supervisor. OUTCOME → RECORD AND HAND OVER.
  9. UNKNOWN: Invite clarification privately; do not assume weight, diagnosis or ability. Address any observed work hazard. Owner: Supervisor. HOLD → REPEAT QUESTION 2 AFTER CORRECTION.
  10. Question 3: Is weight itself being raised? Decision owner: Worker and supervisor.
  11. YES: Ask permission before discussing weight itself. Owner: Worker and supervisor. CONTINUE → QUESTION 4.
  12. NO: Keep focus on the work barrier. Owner: Worker and supervisor. CONTINUE → Task safety and support guide.
  13. UNKNOWN: Clarify what the worker wants addressed; keep the work action available without weight disclosure. Owner: Worker and supervisor. CONTINUE → Task safety and support guide.
  14. Question 4: Does the worker give permission to discuss weight? Decision owner: Worker.
  15. YES: Use respectful language; leave clinical questions with clinicians. Continue the work-control route. Owner: Worker. OUTCOME → RECORD AND HAND OVER.
  16. NO: Respect the answer and address the work issue. Continue the same work-control route. Owner: Worker. OUTCOME → RECORD AND HAND OVER.
  17. UNCLEAR: Do not pursue weight discussion; offer another time or person and continue necessary work controls. Owner: Worker. OUTCOME → RECORD AND HAND OVER.
  18. Outcome: A work concern goes to the task-safety guide. No issue: do not initiate action from appearance.
  19. Stop and escalation boundary: This route does not diagnose, prescribe weight loss or decide employment fitness.

Ask which task, equipment, handling step or shift pattern is difficult, who may be at risk, and what change the worker wants considered. Check the actual equipment specification and handling assessment with the responsible safety or operations person, agree an interim safe method and review it with the worker. Keep any medical assessment with a competent clinician; record the work action and owner rather than unnecessary health detail.

Which workplace changes should come first?

Improve the work and facilities before asking individuals to change their behaviour. Protect usable breaks, access to water and eating space, suitable food arrangements on every shift, and opportunities to vary static work.

Make breaks possible on every shift

Make breaks possible on every shift. Readable native learning diagram with labelled relationships and an accessible text equivalent.
Learning point: Make breaks possible on every shift. Use the named evidence and owner for the actual task; this illustration does not authorise work or change the current review status.
Read the complete visual as text
  1. 1. PLAN COVER: Duty manager assigns a trained relief colleague before the reception break. Include agency and contracted cleaning staff in the access and reporting arrangements.
  2. 2. MAKE FACILITIES USABLE: Facilities owner verifies water, food storage/heating arrangements, eating space and varied suitable seating remain accessible on the late shift.
  3. 3. KEEP WORK SEPARATE: Food and drinking arrangements stay separate from cleaning chemicals and equipment. Do not cancel breaks because the event overruns; review staffing and workload.
  4. 4. VERIFY HANDOVER: Manager checks that relief actually arrives, facilities stay open and the next shift has cover. Worker feedback tests whether the control worked.

Apply the hierarchy of controls to workplace hazards and barriers, not to a person’s body. First remove avoidable causes, such as a staffing plan that makes breaks impossible. Then improve the environment and equipment, organise the work, and give useful information. PPE remains a last line of protection against the task hazard; it is not a weight-management intervention.HSE welfare guidance explains usable facilities.

Practical changes and checks
Work barrierAction and useful check
Breaks routinely missedSupervisor provides relief cover and checks whether breaks actually happen, including nights and lone work.
Food access ends before late shiftsFacilities and catering review opening times, affordability, storage and heating arrangements with workers. Include allergies, cultural needs and accessible choices.
Long periods in one postureRedesign tasks and workstation layout to allow appropriate variation. Offer accessible movement choices without compulsory step counts or exercise.
Heat, fatigue or reduced concentrationReview the task, environment, rest and water access. Make unsafe work safe and seek appropriate health advice for symptoms; do not blame body size.

Minimum welfare requirements and working-time duties depend on the workplace and jurisdiction. Affordable healthy options and voluntary movement offers are SHARE good practice. Neither is a treatment plan or a reason to monitor what an individual eats.

How can the hierarchy of controls reduce work barriers to healthy eating and physical activity?

Assess the work demands and remove or redesign avoidable sources of work-related stress before relying on individual support.

HSE’s risk-assessment route considers demands, control, support, relationships, role and change. Assign a responsible owner and review whether the work change helps.

ERICPD (Eliminate, Reduce including substitution, Isolate, Control, personal protective equipment (PPE), Discipline) is a SHARE decision prompt cross-mapped to HSE’s five-level hierarchy. Choose stronger feasible controls first, verify them in the actual task and record why a stronger option cannot be used. Discipline means sustaining controls through maintenance, supervision and learning. Apply this proportionately to the actual work risk; body size, distress or a health result is not itself a control hierarchy. Organisational rules are administrative controls, and support services do not replace prevention.

Reading the substitution example

A handling aid is normally an engineering measure. Substitution requires replacing a hazardous task or material with a lower-hazard alternative: for example, replacing on-site manual movement of heavy supplies with an assessed smaller-unit delivery method, checking the extra handling frequency and access risks. Selecting a stronger chair alone does not establish substitution.

How do the same decisions change across sectors?

The work barrier differs by task: a production worker may need verified RPE, a construction worker a suitable harness and rescue plan, a hospitality worker usable late-shift welfare, and a driver a safe seat and schedule. Assess the actual hazard and equipment, then verify the strongest feasible control with the people doing the work.

Sector examples with control and stop point
Setting and taskHarm routeStrongest feasible control, owner and check
ManufacturingAn operator needs tight-fitting RPE for a dusty process after a change that could alter face fit. Contaminant may bypass an inadequate seal and harm the lungs.Engineering controls the dust at source; safety selects and fit-tests suitable RPE for residual exposure and checks each-use seal practice. Hold the exposure task if fit or capture fails.HSE task guidance.HSENI risk-assessment route.
ConstructionA worker needs fall protection and a feasible rescue plan for access work. Poor harness fit or unknown rating can fail during a fall or rescue.Planner removes work at height where feasible, uses collective protection first, then verifies the actual harness, anchorage and rescue plan with competent people. Do not start if any critical element is uncertain.HSE task guidance.HSENI risk-assessment route.
HospitalityEvent staff and cleaners miss late breaks because there is no cover and welfare closes early. Fatigue, dehydration or reduced attention can follow.Duty manager plans relief and keeps accessible facilities available to all shifts and contractors; check actual break uptake and stop safety-critical duty if function becomes uncertain.HSE task guidance.HSENI risk-assessment route.
LogisticsA driver has a seat that obstructs safe access and a route that leaves no realistic break. Strain, fatigue or unsafe driving may follow.Fleet and dispatch provide a suitable verified seat and re-plan work and breaks. Check access and real route timing; hold driving while safe function or equipment suitability is uncertain.HSE task guidance.HSENI risk-assessment route.

These are transfer examples, not universal role restrictions. Do not use appearance, BMI or a condition label to decide who may work.

What if PPE, seating or other equipment does not fit?

Hold the affected task when protective equipment cannot work as intended or equipment suitability is uncertain. Select a suitable model and configuration using the current manufacturer’s instructions, then verify fit, capacity and safe use with the person.

A rating alone cannot confirm chair suitability

A rating alone cannot confirm chair suitability. Readable native learning diagram with labelled relationships and an accessible text equivalent.
Learning point: Two independent equipment problems require a hold: documented capacity does not remove an obstructed transfer, and an unknown rating cannot be guessed.
Read the complete visual as text
  1. A — TRANSFER OBSTRUCTED: Capacity may be documented, but armrests obstruct the intended transfer. Facilities owner holds use and reviews actual access, support and manufacturer information with the user.
  2. B — RATING UNKNOWN: An unreadable or missing identification label leaves suitability unresolved. Hold use; do not trial-load, weigh publicly or infer capacity from appearance.
  3. SUITABLE ALTERNATIVE: Equipment adviser verifies identity, specification, condition, capacity and intended transfer. The duty manager accepts the task-specific evidence before release; recheck after a change.

Task safety and optional support

Task safety and optional support. Readable native learning diagram with labelled relationships and an accessible text equivalent.
Learning point: Task safety and optional support. Use the named evidence and owner for the actual task; this illustration does not authorise work or change the current review status.
Read the complete visual as text
  1. Start: Continue a specific work concern after immediate danger has been addressed.
  2. Question 1: Is the affected task safe now? Decision owner: Duty manager / equipment adviser.
  3. YES: Keep the verified controls active and ask about optional health support. Owner: Duty manager / equipment adviser. CONTINUE → QUESTION 2.
  4. NO: Hold affected task, arrange suitable controls or competent equipment advice. Recheck actual suitability before release. Owner: Duty manager / equipment adviser. HOLD → REPEAT QUESTION 1 AFTER CORRECTION.
  5. UNKNOWN: Hold affected task until specifications, condition and function are verified; waiting for advice is not permission to resume. Owner: Duty manager / equipment adviser. HOLD → REPEAT QUESTION 1 AFTER CORRECTION.
  6. Question 2: Does the worker want a health support route? Decision owner: Worker / supervisor.
  7. YES: Offer the relevant clinician or occupational-health route, respecting choice and sharing only necessary information. Owner: Worker / supervisor. CONTINUE → QUESTION 3.
  8. NO: Respect choice; work controls remain required. Owner: Worker / supervisor. CONTINUE → QUESTION 3.
  9. UNSURE: Explain available routes and allow time or another contact without disadvantage. Owner: Worker / supervisor. CONTINUE → QUESTION 3.
  10. Question 3: Are the work action, accepted owner and review arrangements clear? Decision owner: Duty manager.
  11. YES: Record necessary work actions, verify controls and tell the worker how to return. Owner: Duty manager. OUTCOME → RECORD AND HAND OVER.
  12. NO / UNKNOWN — HOLD: Keep unresolved task restrictions active; agree owner and review with the worker. Owner: Duty manager. HOLD → REPEAT QUESTION 3 AFTER CORRECTION.
  13. Outcome: Controls verified and proportionate support/action record agreed.
  14. Stop and escalation boundary: An optional support referral is not equipment acceptance or clinical clearance.

Personal protective equipment (PPE) must match the hazard and the user. Size, adjustment range, compatibility with other items and freedom to carry out the task all matter. Do not cut, extend or otherwise modify PPE to make it fit. Respiratory protective equipment (RPE) and safety-critical items such as harnesses or lifejackets need the relevant selection and fitting process.

For seats, access equipment and evacuation devices, check dimensions as well as the declared user or load range. A capacity figure does not establish comfort, stability, access, compatibility or rescue feasibility. Obtain only the information genuinely needed for that equipment decision, discreetly and with an explained purpose. Do not turn an equipment limitation into a general employment restriction.

Tight-fitting RPE needs a fit test by a competent person for the selected make, model and size. Repeat the test when a change, including weight gain or loss, could alter the face seal. The wearer checks the seal each time the facepiece is put on, following its instructions, before entering the hazardous area. This pre-use check does not replace fit testing. Hold the affected task while fit is uncertain and arrange a suitable verified alternative.HSE fit-testing guidance explains repeat testing and each-use wearer checks.

Worked selection decision: Riverside has two possible replacement chairs. Chair A has a documented capacity covering the intended use but its armrests obstruct the user’s safe transfer. Chair B permits the transfer, but its capacity label is missing. Neither is ready for use: ask the supplier for a configuration that satisfies both requirements, verify the instructions and condition, and check comfort, controls and egress with the user. Do not guess a rating or trial-load an unverified chair.

For manual handling, redesign or mechanise hazardous handling where reasonably practicable, assess what remains and reduce the risk. A larger person is not automatically able to lift more. For planned assistance or evacuation, confirm equipment, route, trained assistance and the local emergency plan in advance; do not improvise a person lift.

Who decides clinical care and workplace adjustments?

Diagnosis, measurements used for clinical decisions, medicines and surgery belong with an appropriate clinician; managers decide workplace controls and adjustments using necessary functional advice.

A worker may choose to discuss treatment privately with their clinician or pharmacist. A manager should not prescribe a weight target, interpret clinical measurements or change treatment. Ask what the task requires, check equipment and PPE suitability, and seek occupational-health advice where function is uncertain. Clinical triage and treatment remain outside this lesson; no BMI, medicine or surgical eligibility rule is supplied.

When should the work task be held and who takes over?

Hold the affected task when safe equipment fit, capacity, access, transfer, PPE performance or current ability to do it safely cannot be established; the supervisor arranges a safe alternative and competent review.

If a person may be in immediate danger, stop unsafe work where safe and use established first-aid and emergency arrangements without waiting for a weight-management conversation. Clinical urgency and safeguarding decisions belong with the appropriate trained service. For non-emergency work concerns, record the restriction, responsible reviewer and review date; release only when the actual work controls and necessary functional advice support it.

What about optional workplace health checks?

An optional wellbeing check is separate from health surveillance required because of a work exposure, and neither replaces control of the work risk.

Optional health offer: readiness before launch

2 linked parts. Follow the question numbers and complete the applicable route.

Part 1 of 2 · Questions 1–3

Optional health offer: readiness before launch. Readable native learning diagram with labelled relationships and an accessible text equivalent.
Continue · Part 2 of 2 · Questions 4–5Optional health offer: readiness before launch. Readable native learning diagram with labelled relationships and an accessible text equivalent.
Learning point: Optional health offer: readiness before launch. Use the named evidence and owner for the actual task; this illustration does not authorise work or change the current review status.
Read the complete visual as text
  1. Start: A discretionary wellbeing health offer is proposed, distinct from surveillance or regulated fitness.
  2. Question 1: Is participation a genuine choice without disadvantage? Decision owner: Wellbeing lead.
  3. YES: Continue provider checks. Owner: Wellbeing lead. CONTINUE → QUESTION 2.
  4. NO / UNKNOWN — HOLD: Redesign invitation, alternatives and management expectations before launch. Owner: Wellbeing lead. HOLD → REPEAT QUESTION 1 AFTER CORRECTION.
  5. Question 2: Are provider competence and clinical follow-up confirmed? Decision owner: Clinical programme owner.
  6. YES: Check data governance. Owner: Clinical programme owner. CONTINUE → QUESTION 3.
  7. NO / UNKNOWN — HOLD: Hold the offer until a competent provider and result/follow-up owner accept the route. Owner: Clinical programme owner. HOLD → REPEAT QUESTION 2 AFTER CORRECTION.
  8. Question 3: Are purpose, data roles and lawful processing settled? Decision owner: Privacy lead.
  9. YES: Check inclusive access and necessary reporting. Owner: Privacy lead. CONTINUE → QUESTION 4.
  10. NO / UNKNOWN — HOLD: Hold collection; privacy review must resolve purpose, lawful grounds, access and retention. Owner: Privacy lead. HOLD → REPEAT QUESTION 3 AFTER CORRECTION.
  11. Question 4: Are access, communications and private results suitable for all intended groups? Decision owner: Programme and equality owners.
  12. YES: Correctly bounded reporting can proceed to owner approval. Owner: Programme and equality owners. CONTINUE → QUESTION 5.
  13. NO / UNKNOWN — HOLD: Correct shift, disability, contractor or privacy barriers; re-review before launch. Owner: Programme and equality owners. HOLD → REPEAT QUESTION 4 AFTER CORRECTION.
  14. Question 5: Has the accountable owner approved the actual arrangements? Decision owner: Accountable programme owner.
  15. YES: Run only the approved offer, monitor concerns and use the response guide. Owner: Accountable programme owner. OUTCOME → RECORD AND HAND OVER.
  16. NO / UNKNOWN — HOLD: Await owner acceptance of provider, choice, access and data evidence. Owner: Accountable programme owner. HOLD → REPEAT QUESTION 5 AFTER CORRECTION.
  17. Outcome: An approved optional offer proceeds to monitoring; a failed gate remains held.
  18. Stop and escalation boundary: Not a statutory surveillance or fitness-assessment pathway.

Optional offer: pressure, distress or data incident

Optional offer: pressure, distress or data incident. Readable native learning diagram with labelled relationships and an accessible text equivalent.
Learning point: Optional offer: pressure, distress or data incident. Use the named evidence and owner for the actual task; this illustration does not authorise work or change the current review status.
Read the complete visual as text
  1. Start: An approved optional offer is running or being reviewed.
  2. Question 1: Pressure, distress or a data incident? Decision owner: Programme owner / clinical or privacy lead.
  3. YES: Pause affected activity, protect people and escalate to the relevant clinical, privacy or management owner. Owner: Programme owner / clinical or privacy lead. CONTINUE → QUESTION 2.
  4. NO: Review access, follow-up and necessity of aggregate reporting. Owner: Programme owner / clinical or privacy lead. CONTINUE → QUESTION 3.
  5. UNKNOWN: Restrict the affected activity while the relevant competent owner clarifies risk. Owner: Programme owner / clinical or privacy lead. HOLD → REPEAT QUESTION 1 AFTER CORRECTION.
  6. Question 2: Has the relevant owner accepted corrective evidence? Decision owner: Clinical / privacy / programme owner.
  7. YES: Recheck the readiness guide before any restart. Owner: Clinical / privacy / programme owner. CONTINUE → QUESTION 3.
  8. NO / UNKNOWN — HOLD: Keep the affected activity paused; resolve cause, support, data flow and follow-up evidence. Owner: Clinical / privacy / programme owner. HOLD → REPEAT QUESTION 2 AFTER CORRECTION.
  9. Question 3: Are access, clinical follow-up and reporting still appropriate? Decision owner: Programme owner.
  10. YES: Close actions and decide on future use with the accountable owner. Owner: Programme owner. OUTCOME → RECORD AND HAND OVER.
  11. NO / UNKNOWN — HOLD: Redesign or end the offer; keep unresolved issues held. Owner: Programme owner. HOLD → REPEAT QUESTION 3 AFTER CORRECTION.
  12. Outcome: Named decision on future use, with necessary action records and review.
  13. Stop and escalation boundary: A normal health result does not prove work controls or fitness.

Before offering a check, define its purpose, who may receive individual results, the follow-up route and how a worker can decline an optional offer without a work-safety decision being inferred from it. A competent occupational-health professional should decide whether exposure-led surveillance is needed and how results affect prevention. Restrict access to any staff health record and ask the privacy lead to confirm the lawful processing route before collection; a manager should receive only the work action needed, not a diagnosis by default.

What should each role learn and demonstrate?

People need competence for the work decision they actually make: noticing a barrier is different from selecting protective equipment or giving clinical advice. Demonstrate the relevant task, record who checked it and revisit competence after a change or failed control. Training never makes unsuitable equipment safe.

A worker should know how to report a missed break, poor fit or unsafe function without making a weight disclosure. Supervisors should practise a private, non-diagnostic conversation and task hold; procurement and safety teams must verify the actual product, configuration and hazard. A course certificate alone cannot establish fit or safe use.

Role, demonstrated competence and reassessment trigger
RoleLearning and practical testAssessor, record and reassessment
Worker or nearby colleagueRecognise poor fit, missed relief and urgent symptoms; report and use the local stop route.Supervisor checks a short scenario or observed report; retain briefing and action record. Recheck after a new task or route.
Equipment user or wearerSelect the authorised item and demonstrate pre-use checks, access and wearer seal check where RPE applies.Competent trainer observes the actual model and task; record authorisation and fit-test evidence as applicable. Reassess after a changed model, task or possible face-fit change.
Supervisor or contractor coordinatorPlan break cover, hold unsafe work, discuss function privately and hand the issue to the right owner.Manager observes a scenario and a real handover record; reassess after failed cover, incident or material work change.
Facilities, procurement or safety specialistSpecify suitability, manufacturer limits, compatibility, access and emergency arrangements for the actual product.Competent technical lead checks specification, user trial and instruction record; reassess when equipment or use changes.
Manager, HR or wellbeing ownerResource work controls, separate optional health offers from required assessment and govern privacy.Senior owner checks a decision file and closed actions; reassess after policy, legal or data-flow change.
Clinician, occupational-health adviser or auditorGive only in-scope health/functional advice or audit evidence and unresolved risk; do not infer fitness from body size.Relevant professional or audit lead checks scope, records and sampling; reassess when role or evidence changes.

Awareness, supervised practice and task authorisation are different. There is no universal weight-management qualification or fixed refresher period for these diverse roles.

How should managers know that the approach is working?

Check whether people can use the facilities, equipment and support in practice. Assign owners to recurring barriers and verify action closure without turning employees’ body measurements into organisational performance indicators.

A useful risk-register entry identifies the actual hazard, affected people, existing controls, outstanding action, owner and review trigger. For example, “late-shift staff miss breaks because no relief is available” leads to staffing and handover actions. “Staff are overweight” does not identify a suitable workplace control.

Review repeated fit failures, delays in adjustments, missed breaks, complaints about stigma and contractor handover gaps. Use worker feedback, suitable sampling and privacy-protected information. Reassess after equipment changes, incidents, altered shift patterns or evidence that controls have failed.

What do the acronyms and key terms mean?

These terms separate personal health information from workplace decisions.

Acronyms and terms
Term or lettersExpansion and meaning in this topic
BMIBody mass index: a height-and-weight measure used in health assessment, not a complete assessment or workplace fitness score.
GLP-1Glucagon-like peptide-1: a hormone pathway used by some prescription medicines; individual indications and instructions differ.
OHOccupational health: a health service that advises on how work and health affect each other.
PPE and RPEPersonal protective equipment and respiratory protective equipment: selected for the actual hazard and wearer.
HSE and HSENIHealth and Safety Executive for Great Britain; Health and Safety Executive for Northern Ireland.
GB and NIGreat Britain and Northern Ireland: related but distinct safety and equality legal routes.
Functional adviceInformation about what work a person can safely do and what support or restrictions may help.
Rated capacityThe declared limit for particular equipment and its configuration. Other suitability checks still matter.
ERICPDEliminate, Reduce including substitution, Isolate, Control, personal protective equipment, Discipline.A SHARE decision prompt; sustain effective controls and learning.
PPEPersonal protective equipment.Use for assessed residual exposure; it does not replace stronger feasible controls.