Aerospace manufacturing safety / Composite machining, exposure and machinery control
Aerospace manufacturing safety · SH-AERO-05Composite machining, exposure and machinery control

Free online training · Approximate learning time: 120–190 minutes · Self-paced
Keep source capture, access safeguards and energy boundaries working together.
Full public teaching and readers are free without an account. A free learner account is required for saved LMS progress and recorded assessment. Completion and any course-completion certificate depend on the configured LMS conditions.
Who this course is for
Composite trimming, CNC, fastening, maintenance and supervisory teams.
Use a changed machining cell to connect composite dust, LEV, rotating machinery, powered-tool reaction and pressure/energy boundaries. Distinguish a warning clue from measured technical proof.
Awareness in an original fictional aerospace manufacturing and airport-interface site. GB occupational guidance has separate NI routes; environmental duties depend on the UK nation and permit. This course does not confer engineering, aircraft maintenance, product-release, lifting, rescue, driving or airside authorisation.
Learning outcomes
- Follow dust from source to people without inventing exposure measurements.
- Check extraction against its actual operating basis.
- Recognise unsafe access and changed reaction-force geometry.
- Maintain energy/pressure restrictions until competent handback.
Course outline
Trace exposure and motion
- Follow composite dust from source to exposureAssess the material, process and travel path rather than judging exposure from visible housekeeping alone.
- Check the complete extraction chainCompare hood position and indicators with the current commissioned operating basis for the actual process.
Check extraction at the source
- Keep swarf removal outside dangerous motionPlan access and cleaning so enclosure and interlocks are not defeated by routine production needs.
- Plan the reaction path of powered torque toolsAssess where tool forces can trap the operator and how the task is supported.
Plan safe intervention
- Recognise every energy source at the intervention boundaryKeep electrical, pneumatic and stored mechanical hazards within the competent isolation plan.
- Treat compressed-air defects as equipment restrictionsSeparate a leak observation from the competent pressure-system assessment and safe recovery.
- Composite dust at trimming and sandingStop dusty work when the material hazard or effective capture is unresolved.
- LEV capture and dust collectionStop the emitting task when extraction is faulty or outside its validated operating condition.
- Rotating tools, CNC enclosure and swarfStop work for an open, defeated or faulty guard protecting moving machinery.
Assess tool reaction and energy
- Powered torque tools and reaction forcesStop when the reaction support, engagement or hand clearance is uncertain.
- Electrical and stored-energy isolationStop if any energy source, isolation boundary or verification is uncertain.
- Compressed air, pressure plant and leaksDo not use or work on a defective pressurised system without approved isolation and control.
Verify the complete control chain
- Restore the machining control chain before production resumesCoordinate dust capture, guarding and energy-state evidence without substituting one control for another.
- Take a verified action into the workplaceConnect one actual task to an owner, evidence and a clear release or escalation decision.
Activities, model practice and assessment
Work through 5 required applied activities and 3 model-practice pauses, with explanatory feedback and independent lesson decisions. Complete 6 distinct model mission sequences across those pauses. Use the actual fictional aerospace manufacturing model or its equivalent accessible route to complete the required decision sequences; launching the model alone does not complete practice.
The 20-question assessment requires at least 80% plus every designated critical safety answer. Complete the required activities, practice and lesson checks. Points and badges cannot offset a critical safety error.
Use the LMS for confirmed save/resume and recorded results. Any certificate follows its configured passed-completion and grade conditions.
Open the public interactive practice copy; public practice is separate from the LMS record.
Sources and learning provenance
Original fictional cases are paired with public SHAREhub teaching and structured topic records. Use the applicable jurisdiction and primary guidance for live work.
- HSE: LEV common processes and sources
- HSE: maintenance of work equipment
- HSE: work on electrical equipment
- HSE: introduction to pressure equipment
- HSE: chemicals in plastics manufacturing
Topic sections, source identities and versions
| Public topic | Chunk and version | Jurisdiction and sources |
|---|---|---|
| dust · assessment | dust--assessment 20261016-letter-review-1 | Great Britain, Northern Ireland dust-src-004 |
| ventilation-local-exhaust-ventilation-and-workplace-air-control · source-control-options | ventilation-local-exhaust-ventilation-and-workplace-air-control--source-control-options 20261019-V-review-1 | Great Britain, Northern Ireland source-hse_five_level_hierarchy |
| lev-local-exhaust-ventilation · daily-checks | lev-local-exhaust-ventilation--daily-checks 2026-10-02-additive-1 | Great Britain, Northern Ireland lev-local-exhaust-ventilation-src-04 |
| lev-local-exhaust-ventilation · missing-baseline-recovery | lev-local-exhaust-ventilation--missing-baseline-recovery 2026-10-02-additive-1 | Great Britain lev-local-exhaust-ventilation-src-03, lev-local-exhaust-ventilation-src-04, lev-local-exhaust-ventilation-src-01 |
| guards-and-machinery-interlocks · stop-action | guards-and-machinery-interlocks--stop-action 2.4 | Great Britain, Northern Ireland src-guards-hse-intro, src-guards-hse-maint, src-guards-l22 |
| machinery-control-measures · isolation | machinery-control-measures--isolation 2.0 | Great Britain, Northern Ireland hse-maintenance, hse-l22 |
| musculoskeletal-issues-ergonomics-and-manual-handling · tools | musculoskeletal-issues-ergonomics-and-manual-handling--tools 2.0 | Great Britain, Northern Ireland hse-toolkit, hseni-manual, hse-mac, hse-rapp, hse-art, hse-dse, gb-dse, ni-dse |
| machinery-hazards · mechanisms | machinery-hazards--mechanisms 2.0 | Great Britain, Northern Ireland hse-intro, hse-l22 |
| electrical-control-measures-safe-systems-and-inspection · isolation | electrical-control-measures-safe-systems-and-inspection--isolation 2.2 | Great Britain, Northern Ireland hse-intro, hse-hsg85 |
| maintenance-inspection-and-testing-of-work-equipment-and-machinery · planning | maintenance-inspection-and-testing-of-work-equipment-and-machinery--planning 2.0 | Great Britain, Northern Ireland hse-puwer, hse-inspect |
| work-equipment-lifting-equipment-and-pressure-systems · pressure-operation | work-equipment-lifting-equipment-and-pressure-systems--pressure-operation 3.0 | Great Britain, Northern Ireland source-pssr_use, source-l122, source-maintenance, source-gb_pssr, source-ni_pssr |
| maintenance-inspection-and-testing-of-work-equipment-and-machinery · defects | maintenance-inspection-and-testing-of-work-equipment-and-machinery--defects 2.0 | Great Britain, Northern Ireland hse-maint, hse-loler-exam, m-review-pssr |
| dust · particle-size | dust--particle-size 20261016-letter-review-1 | Great Britain, Northern Ireland dust-src-001, hse-asbestos-stop, gb-asbestos, ni-asbestos, hse-hsg103, dust-src-013 |
| lev-local-exhaust-ventilation · system-components | lev-local-exhaust-ventilation--system-components 2026-10-02-additive-1 | Great Britain, Northern Ireland lev-local-exhaust-ventilation-src-01 |
| guards-and-machinery-interlocks · harm-chain | guards-and-machinery-interlocks--harm-chain 2.4 | Great Britain, Northern Ireland src-guards-hse-intro, src-guards-hse-ppe, src-guards-hse-maint, src-guards-l22 |
| electrical-control-measures-safe-systems-and-inspection · electrical-control-logic | electrical-control-measures-safe-systems-and-inspection--electrical-control-logic 2.2 | Great Britain, Northern Ireland hse-intro, hse-hsg85 |
| work-equipment-lifting-equipment-and-pressure-systems · three-regime-decision | work-equipment-lifting-equipment-and-pressure-systems--three-regime-decision 3.0 | Great Britain, Northern Ireland source-puwer_overview, source-gb_puwer, source-ni_puwer, source-gb_loler, source-ni_loler, source-gb_pssr, source-ni_pssr, source-pressure_supply |
| lev-local-exhaust-ventilation · changed-process-acceptance | lev-local-exhaust-ventilation--changed-process-acceptance 2026-10-02-additive-1 | Great Britain lev-local-exhaust-ventilation-src-03, lev-local-exhaust-ventilation-src-01, lev-local-exhaust-ventilation-src-04 |
| machinery-control-measures · checks | machinery-control-measures--checks 2.0 | Great Britain, Northern Ireland hse-puwer, hse-inspection, hse-l22 |
| maintenance-inspection-and-testing-of-work-equipment-and-machinery · functional-testing | maintenance-inspection-and-testing-of-work-equipment-and-machinery--functional-testing 2.0 | Great Britain, Northern Ireland hse-l22, hse-maint |
Course SH-AERO-05 · version 2026.10.20.2. .
Questions about this course
Is this training free?
Full public teaching and readers are free without an account. A free learner account is required for saved LMS progress and recorded assessment. Completion and any course-completion certificate depend on the configured LMS conditions.
How long should I allow?
Approximately 120–190 minutes, including teaching, lesson checks, required activities, model or accessible practice and one assessment attempt. Individual pace, review and retries vary. Save and resume in the LMS.
Can I learn without a 3D-capable browser?
Yes. The complete HTML reader provides the teaching. Required model practice has an equivalent accessible decision route in the interactive course. Use the LMS route for recorded learning.
What is required to pass?
Complete the required learning, activities, practice and lesson decisions. The 20-question final assessment requires at least 80% plus every designated critical safety answer. Points cannot compensate for a critical safety error. Follow the feedback before retrying.
Does this authorise aerospace operations?
Awareness in an original fictional aerospace manufacturing and airport-interface site. GB occupational guidance has separate NI routes; environmental duties depend on the UK nation and permit. This course does not confer engineering, aircraft maintenance, product-release, lifting, rescue, driving or airside authorisation. This independent course does not award an external qualification or replace competent task assessment, practical training or site authorisation.
Which manual handling assessments will you learn to use?
TILEO helps you review the wider task; MAC supports appropriate lifting, carrying and team handling of inanimate loads; RAPP supports appropriate pushing and pulling.
These aids support the activity assessment. Repetitive upper-limb work may need ART; variable or complex tasks may need other HSE tools or a fuller competent assessment. Mechanical lifting, stored energy, equipment safety and health decisions retain their separate controls. A low factor score, a downloaded report or completion of this course does not approve the work.
This additional teaching takes about 2–5 minutes, in addition to the course estimate. Optional reading and workplace assessment take additional time.
Learn how to select the method, use separate reports for mixed tasks, add a company logo and keep editable Word or PDF records. After a saved pass, the course offers a direct route to the assessment tools. Workplace assessment and practical competence remain separate from course completion.