Electrical safety on construction sites

Recognise electrical hazards and verify safe supplies, equipment and isolation.
Full public teaching and readers are free to read without an account. A free learner account is required for confirmed saved assessment, completion and certificate records in the LMS.
What you will work through
Fictional North Quay refurbishment: a changing construction workface links contractors, temporary arrangements and nearby occupied areas. You are checking the evidence for electrical safety on construction sites. The responsible site people retain specialist design, operating and release authority.
The course has 5 modules and 18 lessons, with teaching, applied activities, feedback and a check of understanding throughout. There are 4 practice pauses in the actual construction model, with an equivalent accessible text route. Public interactive practice is separate from confirmed LMS assessment and completion records.
Explore the interactive practice copy. Return to the LMS route for recorded learning.
Learning outcomes
- Recognise unsafe temporary supplies, damaged equipment and electrical exposure at the workface.
- Identify the competent selection, protection, inspection and isolation arrangements needed.
- Hold affected work and obtain verified correction when an electrical control fails.
Course outline
Recognise and plan
- See the complete electrical systemHold the additions until a competent person checks the supply, protection, connected load and distribution arrangement.
- How electricity harms peopleKeep people clear and arrange safe isolation and competent assessment without touching the suspect lead.
- Choose safer power for the taskAssess task suitability and select a lower-risk supply arrangement with the necessary maintenance and controls.
- Plan temporary supplies and lightingStop the relocation and have a competent person establish a suitable protected location and distribution route.
Control supplies and equipment
- Generators, earthing and protectionKeep the affected equipment out of service and arrange competent fault investigation without defeating protection.
- Protect cables and connectionsKeep the affected lead out of service, protect people and arrange inspection or replacement through the responsible process.
- Checks, inspections and test evidenceRemove it from use and report the new damage; the old label does not clear its present condition.
- Separate stopping from isolationKeep access controlled until authorised competent people establish and verify secure isolation under the electrical safe system.
Secure electrical work
- Control contractors and boundariesStop the conflicting activity and restore a coordinated isolation and handover process with the responsible competent people.
- Overhead lines and moving plantKeep the operation away and obtain utility-informed arrangements before any approach or lifting.
- Ground penetration and hidden cablesHold penetration until the relevant services, survey limitations and safe work method are resolved.
- Batteries, chargers and DC sourcesStop use and charging through the safe defect procedure and arrange suitable handling away from escape routes.
Protect changing workfaces
- Recognise ignition interfacesStop the changed arrangement and assess electrical suitability, ignition, storage and escape together.
- Respond to shock and suspected contactKeep clear of the electrical danger, raise the alarm and obtain safe isolation and trained emergency assistance.
- Reinstate after a fault or alterationMaintain controlled return to service until competent verification, affected-person clearance and handover are complete.
Verify and improve
- Audit an evidence chainTrace selected items from route condition and defect report through isolation, repair and authorised return.
- Capstone: the next shift's temporary systemHold the changed arrangement and coordinate competent assessment, correction, verification and a clear task briefing.
- Turn learning into a practical improvementDefine an owner, a specific equipment or route control, evidence of implementation and a trigger for checking it again.
Assessment and completion
Complete the required lessons and activities, then take the 20-question final assessment. The pass threshold is 80% plus every designated critical safety answer. Points and badges cannot compensate for a critical error.
Use the LMS to save and resume confirmed progress. Certificate availability follows its passed-completion and grade conditions. Browser practice and printed learning pages do not issue the official LMS record.
Independent construction learning. Completion records learning within the course scope; competent site assessment, practical training and task authorisation remain necessary. It does not confer a NEBOSH qualification.
Sources and learning provenance
The teaching draws on public SHAREhub topic pages and structured source records, with original fictional workface cases. Use the linked primary guidance and the applicable jurisdiction when planning a live task.
- HSE: Electricity systems in buildings
- HSE: Work on electrical equipment and installations
- HSE: Electrical safety on construction sites, HSG141
- HSE: Safe isolation learning
Topic records, source IDs and versions
| Public topic section | Chunk and version | Jurisdiction and source IDs |
|---|---|---|
| electricity · construction-risk | electricity--construction-risk Version 2.2 | Great Britain, Northern Ireland hse-hsg85, an-el2, ni-cdm |
| electrical-hazards-and-risks · harm | electrical-hazards-and-risks--harm Version 2.2 | Great Britain, Northern Ireland hse-intro, hse-hsg85, hse-injuries |
| portable-electrical-equipment · construction-temporary-supplies | portable-electrical-equipment--construction-temporary-supplies Version 2.0 | source-hse_portable_appliance_testing_faq, source-hse_work_using_electrically_powered_equipment |
| electricity · temporary-supplies | electricity--temporary-supplies Version 2.2 | Great Britain, Northern Ireland hse-hsg85, an-el2 |
| electrical-control-measures-safe-systems-and-inspection · protective-devices | electrical-control-measures-safe-systems-and-inspection--protective-devices Version 2.2 | Great Britain, Northern Ireland hse-intro, hse-hsg85, hse-work-equipment |
| portable-electrical-equipment · risk-factors | portable-electrical-equipment--risk-factors Version 2.0 | source-hse_portable_appliance_testing_faq |
| portable-electrical-equipment · pat-myths | portable-electrical-equipment--pat-myths Version 2.0 | source-hse_portable_appliance_testing_faq |
| electrical-control-measures-safe-systems-and-inspection · isolation | electrical-control-measures-safe-systems-and-inspection--isolation Version 2.2 | Great Britain, Northern Ireland hse-intro, hse-hsg85 |
| electrical-contractors · site-control | electrical-contractors--site-control Version 2.2 | Great Britain, Northern Ireland ec-source-002, ec-source-007, ec-source-022 |
| electricity · overhead-lines | electricity--overhead-lines Version 2.2 | Great Britain, Northern Ireland hse-hsg85, an-el2, hse-gs6 |
| electricity · underground-cables | electricity--underground-cables Version 2.2 | Great Britain, Northern Ireland hse-hsg85, an-el2, hse-hsg47 |
| direct-current-electricity · batteries | direct-current-electricity--batteries Version 20261016-letter-review-1 | Great Britain, Northern Ireland direct-current-electricity-src-009, direct-current-electricity-src-010, waste-batteries |
| electrical-hazards-and-risks · secondary | electrical-hazards-and-risks--secondary Version 2.2 | Great Britain, Northern Ireland hse-intro, hse-hsg85 |
| electricity · emergency | electricity--emergency Version 2.2 | Great Britain, Northern Ireland hse-hsg85, an-el2 |
| electrical-contractors · handover | electrical-contractors--handover Version 2.2 | Great Britain, Northern Ireland ec-source-002, hse-rights-24 |
| electrical-control-measures-safe-systems-and-inspection · inspection | electrical-control-measures-safe-systems-and-inspection--inspection Version 2.2 | Great Britain, Northern Ireland hse-intro, hse-hsg85, hse-pat, hse-hsg107 |
| electrical-contractors · planning | electrical-contractors--planning Version 2.2 | Great Britain, Northern Ireland ec-source-002, ec-source-006, ec-source-022 |
| electrical-control-measures-safe-systems-and-inspection · safe-systems | electrical-control-measures-safe-systems-and-inspection--safe-systems Version 2.2 | Great Britain, Northern Ireland hse-intro, hse-hsg85 |
Course version 2026.10.20.4 · SH-ELC-01. Factual source identity and jurisdiction are retained in the .
Questions about this course
Is this course free?
Yes. The training is £0. Full public teaching and readers can be used without an account. A free learner account is required for confirmed saved assessment, completion and certificate records in the LMS.
How long should I allow?
Approx. 1h 50m–2h 40m: approximately 110–160 minutes of self-paced learning, including required activities and one final-assessment attempt. Your pace, review and retries may increase the time. Save and resume in the LMS.
Can I study without a 3D-capable browser?
Yes. The complete learning reader is available in ordinary HTML. Where this course includes model practice, an accessible text route provides the same decision sequence. Use the interactive LMS course to complete its assessed requirements.
What do I need to pass?
Complete the required learning and achieve at least 80% in the final assessment, with every critical safety answer correct. Follow the feedback and review the relevant lesson before retrying.
Where is my completion record?
The LMS holds confirmed grades, completion and certificate records for your learner account. Public browser practice has its own separate progress and is not an official completion record.
Does completion authorise construction work?
Independent construction learning. Completion records learning within the course scope; competent site assessment, practical training and task authorisation remain necessary. It does not confer a NEBOSH qualification.
Presentation and model workshop
Use the same course imagery, worked decisions and source case in a 28-slide teaching companion. Practise classification, compare explained choices and inspect the linked model case.
Open the interactive presentation workshop · Download PowerPoint
This optional companion does not replace the required course activities or final assessment.