SHARE Knowledge Hub
Obesity and Overweight Health Effects
Overweight and obesity describe excess body fat that can raise the risk of health problems, although effects and work capability vary between people. At work, unsuitable access, handling demands or equipment can cause harm to anyone. Assess the actual task, choose suitable controls and agree private, proportionate support where needed.
Understanding Obesity and Overweight Health Effects
Overweight and obesity describe excess body fat that can raise the risk of health problems, although effects and work capability vary between people. At work, unsuitable access, handling demands or equipment can cause harm to anyone. Assess the actual task, choose suitable controls and agree private, proportionate support where needed.
Why this matters at work
Assess the real job and the functional question: reaches, movement, physical demand, PPE fit, access, rescue and any symptom affecting safe performance. Use competent OH or clinical advice when uncertainty materially changes the decision. Record practical restrictions and support rather than attaching a general fitness label to a number. Provide safe equipment and work design while clinical matters are considered. Review the outcome with the worker and address reported symptoms on their merits; attributing every problem to weight can obscure a separate condition and delay useful action.
Agree a practical change, owner and review that can be checked during actual work. The operational record normally needs function and arrangements, not weight history or a full medical report. Keep necessary information restricted and explain who will receive it. Consider equipment, breaks, workload, shifts and access before treating the issue as an individual lifestyle problem. Apply the relevant equality framework to the person’s circumstances, with GB and NI routes distinguished. A respectful conversation is useful only if it leads to timely action on the barrier identified.
How organisations manage this in practice
Use disclosure thresholds, suppression, role-based access and review of quotations. Separate clinical, case-management and employment datasets. External researchers and providers need clear controller or processor roles, approved transfers and limits on reuse. A research label does not remove employment data-protection duties.
Focus on access to safe work and voluntary support rather than attendance targets, public weigh-ins or body-size outcomes. Consult people on different shifts, mobile and remote workers and those who may face disability, cultural, financial or eating-disorder barriers. Address breaks, food and movement opportunities and bullying alongside referral options. Do not promise unsupported clinical or weight-loss results. Check the provider’s competence, evidence, accessibility and handling of health data before commissioning a service. Keep clinical participation separate from necessary workplace controls and performance management. Agree measures that show whether access and work barriers improved, without exposing small-group or individual health information. Provide a way to decline or raise concerns without penalty. Review adverse effects as well as uptake. A programme cannot compensate for unsafe equipment, a roster that prevents rest or an environment in which people fear asking for ordinary support.
Procurement and the work owner should confirm a suitable complete system and a usable escape and rescue method, then verify them in the relevant work configuration. Record the equipment identity, fit check, limitations, outstanding changes and review triggers. If the issue affects the route, assess everyone who may need it and preserve national fire and access requirements rather than inventing a minimum dimension. Weight reduction is not an immediate substitute for safe equipment, reliable egress or reasonable support.
What are overweight and obesity, and why can they matter?
Overweight and obesity describe excess body fat that can increase health risks. Effects vary between people: a body-size label cannot establish a diagnosis, physical capability or suitability for a particular job. nidirect obesity information
Government public-health information for England and Northern Ireland associates obesity with increased risk of type 2 diabetes, cardiovascular disease, some cancers and joint problems. GOV.UK adult obesity guidance Some people also experience fatigue, breathlessness or difficulty moving. These are possible effects, not a checklist for identifying colleagues. Genes, medicines, health conditions, activity and food environments can influence weight; a manager cannot infer the cause by looking at someone. nidirect obesity information.
Body mass index (BMI) relates weight to height. It is a screening measure with important limits, including its inability to distinguish muscle from fat and differences in health risk between population groups. Clinical interpretation should follow nidirect obesity information. A BMI category is not a pass or fail test for work. Seek healthcare advice for symptoms instead of attributing them to weight.
At work, distinguish two questions: what health support does the person want or need, and what barrier is the job creating? A seat that does not support its user, clothing that restricts movement or a roster that makes recovery difficult calls for a practical work review, whatever the person’s body size. Avoid turning an equipment-fit problem into a weight-loss instruction.
Which workplace hazards cause harm in the examples?
Obstructive sleep apnoea is associated with obesity, but it has other causes and cannot be diagnosed from body size. Interrupted breathing during sleep can cause marked daytime sleepiness and poor concentration; nidirect obstructive sleep apnoea explains the symptoms and clinical route. Treat actual sleepiness as a safety concern in driving, machinery and other critical work whatever its cause: stop the affected task if alertness is impaired, arrange safe travel and seek clinical or occupational-health advice. For licensing, use current DVLA guidance in Great Britain or the DVA route in Northern Ireland; a manager should not diagnose sleep apnoea or assume every diagnosis has the same notification rule.
The person’s weight or health condition is not a hazard to remove. In these examples, the hazard is a fall from height, a poorly controlled handling task or harmful work demands. The harm chain starts with the task and missing control, reaches a worker through impact, force or fatigue, and may cause injury or ill health. These risks can affect people of any body size. A body-size label never replaces a task assessment or a clinician’s judgement.
| Task and hazard | Route and affected tissue | Plausible harm and early clues | Stop or escalation trigger |
|---|---|---|---|
| Roof outlet inspection near an edge or fragile surface | A person can fall to a lower level if access, edge protection or the complete protective system fails; impact affects head, spine and limbs. | Immediate serious injury or death is possible. Poor harness fit or an unverified connection is a control failure, not evidence of a worker’s capability. | Unknown roof condition, missing edge protection, incompatible equipment or unverified rescue: hold work and obtain a competent access plan. |
| Moving stacked event tables or stock with a defective trolley | Forceful pushing, awkward reach or a sudden trolley stop loads the back, shoulders and arms; a shifting load may strike feet or bystanders. | Strain or other musculoskeletal injury may develop during or after repeated work; acute pain or loss of load control is an immediate warning. | Sticking wheel, unstable load, blocked route, pain or fatigue affecting control: stop and redesign the handling task. |
| Long or irregular shifts with inaccessible breaks and welfare | Work organisation can increase fatigue and reduce recovery; this affects attention and wellbeing rather than proving a weight-related illness. | Fatigue, reduced concentration or stress may affect safe task performance; longer-term health links need individual clinical interpretation. | A worker cannot take a safe break, hydration or needed support, or reports impairment: arrange a task and shift review. |
| Driving or operating machinery while excessively sleepy | Loss of vigilance or a microsleep can delay control of a vehicle or machine; a collision or contact can injure the worker and others. | Immediate serious injury or death is possible. Near-sleep, repeated lapses or difficulty concentrating are warning signs; the cause needs clinical assessment and must not be inferred from body size. | Do not drive or continue safety-critical operation while alertness is impaired. Arrange safe handover and travel, then use occupational-health or clinical advice and the applicable DVLA or DVA route. |
How should a manager respond to a work barrier?
Speak privately, establish the actual task difficulty, agree a safe interim arrangement and involve the right adviser. Apply the hierarchy of controls to the work hazard or barrier: a person’s body is not a hazard to eliminate.
Ask, “What about the task or equipment is making work difficult, and what change would help?” Listen to the worker’s experience. Explain who needs to know the agreed adjustment. A supervisor needs usable restrictions or support instructions; detailed clinical records belong in appropriately controlled systems.
First consider whether the hazardous activity can be avoided or redesigned. Then improve access, mechanical assistance, workstations or the environment. Organise workload, staffing and breaks around the remaining risk. Provide suitable personal protective equipment (PPE) where required; do not use PPE to excuse avoidable hazards. Consult the worker and check the change actually helps. HSE managing risks at work and HSENI risk assessment explain the jurisdiction-specific assessment routes.
SHARE recommends no public weigh-ins, weight-loss targets in performance reviews, body comments or compulsory wellbeing competitions. This is a workplace-practice recommendation; it does not prohibit properly justified, confidential clinical measurements. If an actual product’s user-weight limit must be checked, obtain only the necessary information privately through an agreed competent process. Do not record it on a public allocation board.
Refer to occupational health (OH) when functional advice is needed; involve HR for fair process and adjustments. GOV.UK reasonable adjustments for workers applies to GB; nidirect disability employment rights provides the NI route. Where health data is processed, establish a lawful basis and a separate special-category condition before collecting it. Employee consent alone is not a universal solution. GOV.UK personal data an employer may keep.
How does control hierarchy apply without labelling a person as a hazard?
For roof access, first avoid the roof task or use a safer access method. Then improve collective fall protection, equipment fit and work organisation before relying on suitable personal protection. Assess the changed task with the worker and verify that the controls work. HSE hierarchy of controls
Use the HSE hierarchy for this task: eliminate the hazard where possible, substitute, use engineering controls, organise the work and use suitable PPE for residual risk. The exact choices require a task-specific assessment and competent verification. HSE hierarchy of controls
How do the same controls apply to other material hazards?
Each row applies elimination, substitution, engineering, administrative checks and residual personal protection to the work hazard. The five HSE levels are elimination, substitution, engineering controls, administrative controls and PPE; supervision and inspection support the administrative arrangements. A higher control may be infeasible only after the specific task and alternative have been assessed.
| Hazard | Eliminate, substitute, engineer | Admin, PPE, owner and check | Failure, stop and direct sources |
|---|---|---|---|
| Defective trolley and manual handling | Eliminate the move where possible. Repairing or retiring a defective trolley removes the defect; a suitable mechanical mover reduces or avoids manual pushing but does not necessarily remove the handling task. If a load must move, substitute a smaller load or route; do not substitute a different worker on body-size assumptions. Isolate pedestrians and provide a maintained, suitable aid. | Supervisor checks the trolley, route, load and worker feedback before release; train and supervise the residual task. Gloves/footwear protect residual hazards but do not fix the trolley. administrative supervision and checking sustain the engineered choice. | Tag the trolley out; stop if the aid fails, the route is blocked or the worker reports unsafe exertion.HSE L23 HSE MANUAL WEB HSE PPE HIERARCHY |
| Shift fatigue | Eliminate avoidable extended shifts and unsafe turnaround. Substitute a workable roster; a reminder or wellbeing campaign is not a substitute. Improve lighting, rest space and staffing so breaks are possible. | Manager tests the roster with workers, checks hours, missed breaks and near misses; schedule breaks and review actual workload. PPE is not a fatigue control. administrative supervision and checking address work design and checking. | Stop or reassign safety-critical work if alertness is impaired; investigate repeated missed breaks before the next roster.HSE HSG256 HSE RISK HSE PPE HIERARCHY |
| Driving sleepiness | Eliminate the journey or use remote work where feasible; substitute a rested driver or safer travel mode rather than assuming a diagnosis. Provide realistic scheduling and a safe place to pause. | Driver reports drowsiness before departure; manager checks journey, rest and task fitness without collecting unnecessary clinical detail. No PPE compensates for sleepiness; clinical/DVLA or DVA advice belongs with the competent route. | Do not start or continue driving when sleepy; arrange safe transport and seek medical advice where symptoms recur.HSE SAFE VEHICLES DVLA SLEEPINESS NI DVA MEDICAL HSE PPE HIERARCHY |
How should a roof-access PPE fit concern be handled?
Hold the affected roof task when the available harness cannot be fitted as instructed. Reconsider the access method first; a larger harness alone does not establish that the complete fall-protection and rescue system is suitable. HSE HEIGHT LAW
Task on hold — discuss equipment fit privately
Read the complete visual as text
- Task on hold
- Confirm instructions, fit and compatibility
- Use competent equipment advice
- A private equipment-fit concern holds the affected task. The unused harness is illustrative, not an approved assembly. Size alone does not establish permitted total load, compatibility or a suitable rescue arrangement.
Equipment suitability before release
Read the complete visual as text
- Start: Required equipment does not fit, restricts movement or has an uncertain user limit. Hold the affected task: roof-edge or fragile-surface falls can cause serious injury.
- Question 1: Can the hazardous task be avoided or redesigned? Decision owner: Supervisor and purchaser with competent supplier/technical advice.
- YES: Redesign and assess the safer alternative method, then check remaining controls and emergency arrangements. Owner: Supervisor and purchaser with competent supplier/technical advice. CONTINUE → QUESTION 3.
- NO: Confirm instructions, fit, load and compatibility. Owner: Supervisor and purchaser with competent supplier/technical advice. CONTINUE → QUESTION 2.
- UNKNOWN: Keep the affected task on hold while the competent owner assesses avoidance or redesign. Owner: Supervisor and purchaser with competent supplier/technical advice. HOLD → REPEAT QUESTION 1 AFTER CORRECTION.
- Question 2: Are instructions, fit, permitted load and compatibility confirmed? Decision owner: Supervisor and purchaser with competent supplier/technical advice.
- YES: Check remaining controls and emergency arrangements. Owner: Supervisor and purchaser with competent supplier/technical advice. CONTINUE → QUESTION 3.
- NO / UNKNOWN: Keep task on hold; seek competent supplier or technical advice and return only when the evidence is available. Owner: Supervisor and purchaser with competent supplier/technical advice. HOLD → REPEAT QUESTION 2 AFTER CORRECTION.
- Question 3: Are remaining controls and emergency arrangements confirmed? Decision owner: Supervisor and purchaser with competent supplier/technical advice.
- YES: Supervisor releases only the assessed method; monitor for change during work. Owner: Supervisor and purchaser with competent supplier/technical advice. CONTINUE → QUESTION 4.
- NO / UNKNOWN: Keep task on hold and resolve the control or emergency gap, including any unverified rescue arrangement. Owner: Supervisor and purchaser with competent supplier/technical advice. HOLD → REPEAT QUESTION 3 AFTER CORRECTION.
- Question 4: Have conditions, equipment or symptoms changed? Decision owner: Supervisor and purchaser with competent supplier/technical advice.
- YES: Stop safely and return to planning. Clinical symptoms use the separate symptoms/support route. Owner: Supervisor and purchaser with competent supplier/technical advice. HOLD → REPEAT QUESTION 1 AFTER CORRECTION.
- NO: Continue the agreed method; complete checks and hand back safely. Owner: Supervisor and purchaser with competent supplier/technical advice. OUTCOME → RECORD AND HAND OVER.
- UNKNOWN: Stop the affected task safely and seek competent or clinical advice according to the concern. Owner: Supervisor and purchaser with competent supplier/technical advice. HOLD → REPEAT QUESTION 1 AFTER CORRECTION.
- Outcome: Complete checks and hand back only under the assessed method.
- Stop and escalation boundary: Planning aid, not fall-protection installation or rescue instructions. Manufacturer definitions govern total permitted load; one component rating or harness size does not approve the whole system.
Task and setting. A maintenance contractor is due to inspect a leisure-centre roof outlet. The roof edge and possible fragile surfaces expose the worker to a fall; staff and visitors below may be affected by falling items. This is an illustrative planning example, not a roof-work method. The site manager and competent contractor must agree access, segregation, roof condition, weather limits and emergency arrangements before release.
Before. Consider inspection from ground level or another method that avoids exposure. If access remains necessary, prefer appropriate collective protection over reliance on personal fall arrest. Confirm task competence and the contractor–site interface. In a protected fitting area, the worker reports that the supplied harness cannot be adjusted to the manufacturer’s instructions. Stop the release; do not improvise straps or permit a “quick look”. HSE introduction to work at height; HSE PPE overview.
Selection decision. Compare two replacement options. Option A appears large enough, but its instructions and permitted user range are unavailable. Reject it for this task. Option B has verified instructions and fits correctly, but still needs confirmation of the permitted total user load (including clothing, tools and carried items as defined by the manufacturer), compatibility with the other components, clearance and rescue arrangements. Do not select by size, one component’s rating or body weight alone. Supplier or competent specialist evidence must resolve every uncertainty.
During. The supervisor releases only the revised, documented arrangement. Workers use the agreed method and report restricted movement, deteriorating weather, changed access, symptoms or equipment damage. Keep the public exclusion area effective. A substitute worker, extra tool load or changed roof condition returns the task to the planning hold point.
Hold and emergency. Do not start or continue while equipment identity, suitability, inspection condition or the rescue arrangement is uncertain. Quarantine defective equipment. If someone falls or becomes suspended, activate the planned rescue and emergency response; untrained colleagues must not improvise a rescue or expose themselves to the same fall risk.
Completion and hand-back. Confirm everyone is safely clear, account for tools and equipment, restore barriers and agree site hand-back with the contractor. Record the changed method, equipment identities and checks, authorisation and defects. Keep necessary personal information private; the procurement learning is to provide a suitable range and reliable technical information for the workforce.
What can this look like in different roles?
Check the real barrier in each role: vehicle and seat-belt fit for drivers; PPE and access for site workers; adjustable workstations for office staff; safer handling and breaks for care teams; and aids and workload for warehouse staff. Agree controls privately without inferring capability from body size.
The aim is not to categorise people by body size. It is to notice work barriers that can affect anyone and to make sure controls are inclusive, safe and respectful.
Where a concern is safety-critical, the response should focus on the task and control standard. Where a concern is wellbeing-related, support should be voluntary and privacy-led.
| Role | Possible work issue | Supportive control |
|---|---|---|
| Driver | Cab access, seat-belt fit, fatigue or excessive sleepiness during driving. | Check vehicle suitability and roster; stop driving if alertness is impaired, arrange safe travel and review the clinical/licensing route privately. |
| Site worker | PPE fit, heat, ladders, confined access or manual handling. | PPE choice, task redesign, access planning and thermal controls. |
| Office or call-centre worker | Chair fit, DSE setup, long sitting and discomfort. | Adjustable workstation, DSE review and movement opportunities. |
| Healthcare or care worker | Manual handling, shift fatigue and dignity in uniformed roles. | Safer handling systems, breaks and uniform range. |
| Warehouse worker | Picking pace, manual handling and heat in PPE. | Task rotation, mechanical aids and realistic workload. |
How do the same decisions transfer across sectors?
These are representative work hazards, not predictions based on a person’s body size. Ask about the actual task and equipment, select the strongest feasible control and agree any individual support privately. Great Britain and Northern Ireland use separate legal routes; competent site advice is needed for the final method.
| Sector and task | Mechanism and plausible harm | Strongest feasible control | Residual safeguard and check or stop |
|---|---|---|---|
| Manufacturing — an operator reaches an awkward machine control and moves material bins. | Poor reach and forceful handling may load the shoulder and back; a moving bin can strike people. | Redesign control reach and use suitable mechanical handling for the actual load. | Check equipment fit, guarding and the travel route; stop for inaccessible controls or a defective aid. |
| Construction — a contractor inspects a roof outlet near an edge. | A fall or contact with a fragile surface can cause immediate serious injury or death. | Avoid the roof visit where possible; otherwise use a competent plan and collective protection. | Verify roof condition, equipment compatibility, weather and rescue; hold for any unknown or fit concern. |
| Hospitality — a late-shift team sets out event tables in a leisure centre. | Repeated pushing with a sticking trolley and limited recovery may cause strain or fatigue. | Remove defective equipment, use a suitable aid and design a clear route and workable breaks. | Check wheel condition, load stability, contractor routes and access to welfare; stop when control is lost. |
| Logistics — a driver loads stock and reports poor seat-belt fit or excessive sleepiness. | Awkward loading may cause strain; poor restraint fit or loss of vigilance can lead to serious collision injury to the driver or others. | Use handling aids and a suitable vehicle/restraint, with a roster that allows adequate rest; stop driving when sleepiness impairs alertness. | Fleet check confirms fit and control reach. Arrange safe handover and travel for an unalert driver; seek clinical/OH advice and check GB DVLA or NI DVA requirements before resuming. |
How can wellbeing support stay useful and voluntary?
Improve the conditions people work in and offer reliable support without making weight loss a condition of participation, reward or good performance.
For shift workers, check that breaks, drinking water and suitable food storage or food choices are available during the actual shift. For sedentary work, make movement and changes of activity practical. Use worker feedback to find barriers that posters alone will not fix. HSE’s HSE HSG256 managing shift work explains how shift arrangements and facilities affect fatigue and wellbeing.
A voluntary health programme needs a clear purpose, appropriate clinical governance where relevant and a privacy assessment. Workers should understand what is optional, what information is collected, who receives it and whether declining affects them. Avoid public leaderboards and weight-loss competitions. A confidential clinical assessment needed for a specific role is a separate process; establish its justification and applicable rules with OH and HR.
Do not offer medication, calorie targets or personalised diet advice through a manager briefing. Signpost nidirect obesity information and local healthcare services. Use ICO worker-health information guidance for the applicable processing tests. The ICO page carries a review notice following Data (Use and Access) Act changes; check that notice when designing the programme.
When should work stop or medical help be sought?
Pause the affected task for an immediate safety concern and use the appropriate equipment, clinical or emergency route. Do not assume that breathlessness, fatigue or pain is caused by body weight. HSE HEIGHT LAW
Symptoms and support — keep the routes distinct
Read the complete visual as text
- Start: Symptoms or a credible work-safety barrier are reported or observed.
- Question 1: Serious emergency signs? Decision owner: Worker and supervisor; first aider/clinical service for symptoms.
- YES: Call 999 and activate local first aid; follow emergency-service instructions. Do not drive yourself to emergency care. Owner: Worker and supervisor; first aider/clinical service for symptoms. STOP / REFER → APPROPRIATE RESPONSE.
- NO: Check present task safety. Owner: Worker and supervisor; first aider/clinical service for symptoms. CONTINUE → QUESTION 2.
- UNKNOWN: Obtain urgent appropriate help; protect the person and pause unsafe work. Owner: Worker and supervisor; first aider/clinical service for symptoms. STOP / REFER → APPROPRIATE RESPONSE.
- Question 2: Can the task be done safely now? Decision owner: Worker and supervisor; first aider/clinical service for symptoms.
- YES: Check whether symptoms are new or worsening. Owner: Worker and supervisor; first aider/clinical service for symptoms. CONTINUE → QUESTION 3.
- NO / UNSURE: Stop the affected task safely and obtain clinical or competent advice according to the concern. Routine support does not clear the task. Owner: Worker and supervisor; first aider/clinical service for symptoms. HOLD → OWNER RESOLVES BEFORE RESUMING.
- Question 3: Are symptoms new or worsening? Decision owner: Worker and supervisor; first aider/clinical service for symptoms.
- YES: Obtain prompt advice through the local urgent-care or GP route. Owner: Worker and supervisor; first aider/clinical service for symptoms. STOP / REFER → APPROPRIATE RESPONSE.
- NO: Consider workplace support. Owner: Worker and supervisor; first aider/clinical service for symptoms. CONTINUE → QUESTION 4.
- UNKNOWN: Seek appropriate clinical advice; do not attribute symptoms to body weight. Owner: Worker and supervisor; first aider/clinical service for symptoms. STOP / REFER → APPROPRIATE RESPONSE.
- Question 4: Is workplace support needed? Decision owner: Worker and supervisor; first aider/clinical service for symptoms.
- YES: Discuss privately and agree adjustment, owner and review. Owner: Worker and supervisor; first aider/clinical service for symptoms. OUTCOME → RECORD AND HAND OVER.
- NO: Offer reliable voluntary signposting if wanted; review the agreed work arrangement. Owner: Worker and supervisor; first aider/clinical service for symptoms. OUTCOME → RECORD AND HAND OVER.
- UNKNOWN: Ask privately about the work barrier and agree a review, using HR or occupational-health advice where needed. Owner: Worker and supervisor; first aider/clinical service for symptoms. OUTCOME → RECORD AND HAND OVER.
- Outcome: Clinical care, safe work and voluntary support each retain their own owner.
- Stop and escalation boundary: Serious signs include severe breathing difficulty, tight/heavy chest, spreading chest pain, very pale/blue/grey skin or sudden confusion. Never infer diagnosis or fitness from body size. Stop driving or other safety-critical work affected by sleepiness, arrange safe travel and use current DVLA/DVA advice. Local non-emergency routes differ, especially NI. At every stage: If safety changes, stop and reassess.
For severe breathing difficulty, a tight or heavy chest, spreading chest pain, very pale/blue/grey skin or sudden confusion, call 999 and activate local first-aid arrangements. The person should not drive themselves to emergency care. nidirect shortness of breath gives symptom guidance. For less severe new or worsening symptoms, obtain prompt clinical advice through the locally available urgent-care or GP route; NI arrangements differ from England’s government health 111 route.
| Situation | Immediate decision | Evidence needed to resume or review |
|---|---|---|
| PPE, seating or access is unsafe | Stop the affected activity; provide a safe alternative without public discussion of the person. | Manufacturer information, fit/suitability checks and supervisor confirmation of the revised method. HSE PPE overview HSE introduction to work at height |
| Fatigue or symptoms affect safe performance | Make the situation safe and seek clinical or OH advice according to urgency. | Relevant functional advice and a reviewed task arrangement; a manager does not diagnose fitness. HSE managing risks at work nidirect shortness of breath |
| Adjustment request without immediate danger | Discuss privately and agree interim support while advice is obtained. | Agreed actions, responsible person and review date; use the GB or NI equality route. GOV.UK reasonable adjustments for workers nidirect disability employment rights |
| Bullying or inappropriate health-data collection | Challenge the behaviour and prevent further unnecessary disclosure. | HR or data-protection review and corrective action; protect access to existing records. GOV.UK personal data an employer may keep GOV.UK reasonable adjustments for workers |
| Excessive sleepiness affects driving or another safety-critical task | Stop the task, secure the vehicle or machine and arrange safe handover and travel; seek clinical/OH advice without guessing the cause from body size. | Alertness and fitness advice, a safer work plan and the applicable GB DVLA or NI DVA licensing route. A licence alone does not prove current fitness for this task. DVLA excessive sleepiness and driving DVA medical conditions and driving HSE safe workplace vehicles |
How can a purchaser and worker check PPE fit together?
Match the protective equipment to the task and its user, then check the complete combination before allocating it. Use this fitting aid for anyone; body size alone cannot decide work capability.
HSE's GB advice supports worker involvement, supplier advice and checks of fit and compatibility. Do not alter PPE to make it fit. The following is a SHARE planning aid, not a product test or a clinical assessment. HSE PPE selection and use · NI risk-assessment route.
| Stage and owner | Evidence to obtain | Hold or follow-up |
|---|---|---|
| Purchaser: describe the task | Give the supplier the hazards, duration and other equipment worn. | Seek specialist advice if suitability is uncertain. |
| Worker and supervisor: try the fit | Follow product instructions in a safe fitting area; check movement and comfort. | Poor fit: obtain a suitable option before affected work. |
| Competent selector: check the combination | Check PPE together; eyewear must not interfere with a respirator seal. | Resolve incompatibility; complete any separate RPE fit requirements. |
| Supervisor: hand over and review | Explain use, limitations and fault reporting; record the chosen arrangement. | A fit complaint or task change reopens the assessment. |
For the roof example, fitting is only one step: retain the complete access, equipment-capacity and rescue checks above. A purchaser cannot release roof work from a clothing-size choice.
What should managers record and check?
Keep evidence that the work barrier was corrected, the worker was heard and the revised arrangement works. Do not use a safety risk register as a clinical record.
A useful risk-register entry describes the task hazard, who could be harmed, the missing or weak control, interim action, owner and closure evidence. For example: “roof inspection held because the available fall-protection equipment could not be confirmed suitable; revised access method awaiting competent review”. Avoid a register headed “obese employees”.
Keep a private adjustment record with the agreed work changes and review arrangements. Keep equipment instructions and suitability evidence with equipment records. Managers receive only what they need to implement support. The organisation must set access, retention and disclosure arrangements appropriate to health information. GOV.UK personal data an employer may keep.
Before work, the supervisor checks that promised equipment and adjustments are available. After a trial or change, ask whether the arrangement works in real conditions. Procurement and leadership should review repeat fit failures, overdue corrective actions, unavailable breaks and complaints about stigma. An absence of reports can mean people do not feel safe reporting. Sample controls and seek worker feedback. Set review arrangements to reflect the work risks and changes; this topic does not establish a fixed inspection or screening interval.
Which duties apply in Great Britain and Northern Ireland?
In Great Britain, assess work risks under the Health and Safety at Work etc. Act 1974 and Management Regulations 1999, and consider Equality Act 2010 adjustments. In Northern Ireland, use the Health and Safety at Work (NI) Order 1978, Management Regulations (NI) 2000 and the applicable Disability Discrimination Act 1995 framework. UK GDPR and the Data Protection Act 2018 govern health data. Obesity alone is not an automatic disability or employment restriction.
Use the following jurisdiction routes for workplace decisions. Check the current legislation and amendments with a competent adviser before formal legal reliance. HSE RISK HSENI RISK
| Jurisdiction | Legal framework and practical boundary | Verification route |
|---|---|---|
| Great Britain | Health and Safety at Work etc. Act 1974 and Management of Health and Safety at Work Regulations 1999: assess and control work risks. Workplace welfare, PPE and task-specific rules apply within their scope. Equality Act 2010 disability duties may require reasonable adjustments. | Use HSE managing risks at work and GOV.UK reasonable adjustments for workers. Body size alone is not the disability test. |
| Northern Ireland | Health and Safety at Work (Northern Ireland) Order 1978 and Management of Health and Safety at Work Regulations (Northern Ireland) 2000. Disability Discrimination Act 1995 framework, as applicable and amended in NI, provides the adjustment route. Do not substitute the Equality Act 2010 summary. | Use HSENI risk assessment for current regulatory routes and nidirect disability employment rights for employment rights; seek HSENI or qualified NI advice on task-specific equivalents. |
| United Kingdom | UK GDPR and Data Protection Act 2018 govern personal health information. Identify the lawful basis and special-category condition; minimise collection and protect access. | Use ICO worker-health information guidance to identify the lawful basis and special-category condition and check its current review notice. GOV.UK employer-data information remains a general introduction. |
Workplace use and product supply are separate questions. Suitable PPE still needs appropriate fit, compatibility, information and maintenance even if it carries a conformity mark. This page makes no product-marking or market-placement decision; purchasers must check the current supply regime for the destination market and the manufacturer’s instructions. HSE PPE overview.
SHARE’s suggested conversations, local review records and voluntary-campaign boundaries are good-practice recommendations. They do not create a legal duty to weigh workers or require a particular obesity-awareness certificate.
How should management arrangements verify controls?
Assign an owner, involve workers, check the control in use and act on failures before returning to routine work.
HSE’s Plan, Do, Check, Act guidance provides the government management route for this topic. Apply it to the actual task, equipment, people and jurisdiction, then keep the verification and corrective-action record. Standards-specific claims are held until their rights and competent review are resolved. HSE Plan, Do, Check, Act
What should people be able to do?
Workers need to know how to report an unsafe fit or access barrier; supervisors need to respond without stigma and know when to seek specialist advice. Training should match the work and the decision being made.
Demonstrate equipment checks and reporting using the actual equipment and instructions. Supervisors should practise a private conversation, an immediate task hold and a clear handover to OH, HR or a technical adviser. Purchasers should request fit ranges, ratings and compatibility information, and test whether supplied options meet users’ needs. Maintainers should identify defects and isolate equipment through the established system.
Clinical assessment belongs with appropriately qualified healthcare professionals. A general awareness session does not qualify a manager to diagnose obesity, set treatment, judge disability or approve a fall-protection system. There is no universal certificate expiry or refresher interval stated here; review learning when tasks, equipment, guidance or performance indicate a need.
| Role | Learning and practical test | Assessor and evidence | Reassessment trigger |
|---|---|---|---|
| Workers and nearby colleagues | Recognise an unsafe fit, access or handling barrier; report it and explain the stop route. Awareness does not authorise roof work. | Supervisor checks a task-specific demonstration or scenario; briefing and report-route record. | Changed task, equipment or missed warning. |
| Supervisors | Practise a private response, hold an unsafe task, arrange a safe interim method and involve the right adviser. | Competent manager or safety adviser observes a scenario and records the hold/release decision. | A failed response, incident or change in method. |
| Purchasers and maintainers | Use current manufacturer information to assess fit, ratings and compatibility; isolate defective equipment. | Technical owner checks a specification or defect exercise; approval and quarantine records remain. | New product, rating uncertainty or defect trend. |
| Occupational health and HR | Give work-focused functional advice or apply the appropriate GB or NI adjustment process without unnecessary disclosure. | Professionally competent lead reviews the advice or decision route; restricted record remains. | Changed function, law or support need. |
| Safety advisers and auditors | Trace task risk, worker input, equipment evidence and whether controls work without treating BMI as a fitness standard. | Competent lead samples a case and closed actions; audit note and corrective action remain. | Control failure, change or recurring barrier. |
How can the hierarchy of controls reduce lifting strain through suitable packing-bench design?
What do the acronyms and key terms mean?
These terms help separate health information, equipment checks and employer responsibilities.
| Term | Meaning |
|---|---|
| BMI | Body mass index: weight in relation to height; a screening measure, not a workplace capability test. |
| OH | Occupational health: professional health advice about work, functional ability and support. |
| PPE and RPE | Personal protective equipment and respiratory protective equipment. Suitability includes the actual wearer, task and other equipment. |
| DSE | Display screen equipment; workstation assessment considers the user and task. |
| GB and NI | Great Britain means England, Scotland and Wales; Northern Ireland has its own workplace and equality legal routes. |
| Special-category data | Personal data, including health information, that requires additional legal safeguards. |
| Reasonable adjustment | A change to reduce disability-related disadvantage under the applicable legal framework; individual circumstances matter. |