Approx. 6.5–10.5 hours for core self-paced learning
Independent SHARE management and supervision training. GB legal baseline with NI differences identified. No IOSH or NEBOSH endorsement, regulated qualification status, specialist competence or task authorisation is claimed.
Use the interactive player for saved checks and activities. Reading this page does not submit an exam or a project.
Illustrative workplace context.
The people behind the operation
Explain whose health, safety and welfare your management decisions affect.
Managers influence the conditions in which people work: staffing, layout, equipment, time, supervision and the response when a problem appears. These decisions affect permanent and temporary staff, contractors, visitors and the public. A person may be exposed even when they are not part of the team producing the goods or delivering the service. Start by identifying who can encounter the activity, including those cleaning, maintaining or responding to a breakdown.
The moral case begins with preventing avoidable harm and respecting the people affected. It does not require an injury photograph or a traumatic personal disclosure. In the fictional dispatch case, ask what a safe day means for the cleaner crossing the lane and for the driver whose view is restricted. Consider the consequences for the individual’s family and colleagues without inventing a real fatality story. Health effects can accumulate slowly as well as happen suddenly.
A zero-harm ambition can express that commitment, but a target of “zero reports” can silence warnings. Make it safe to disclose problems, set realistic production plans and resolve critical control failures. A manager who stops the affected movement, provides an alternative and explains the decision demonstrates commitment through action. Signing a policy while accepting the damaged gate would leave the exposure unchanged.
Workplace case
The supervisor says that the cleaner is employed by a contractor, so the transport interface is someone else’s concern.
Decision and explanation
Who needs to be considered at the damaged gate?
Everyone who may be affected by the work, including contractors and visitors.
Management decisions must consider the actual people exposed, not just the immediate production team.
Distinguish useful cost analysis from putting a price on a person.
An injury can create treatment, absence, replacement labour, damaged equipment, investigation and disruption costs. It can affect morale, customer commitments and future work. Insurance may meet some eligible claims under its terms; it does not automatically cover every loss. Regulatory fines and many indirect losses cannot simply be labelled insured. Check what a particular cost represents before classifying it.
Use a fictional cost exercise to reveal how work organisation creates consequences. Suppose there are three days of lost production at £900 per day, temporary cover costing £600, £450 of investigation time and £750 of equipment repair. The stated operational subtotal is £4,500. Keep any additional assumptions separate: multiplying this figure by an unexplained industry ratio would create false precision. Do not treat this subtotal as a valuation of pain, disability or a life.
The management question is what proportionate prevention would address the exposure, not whether an injury is cheap enough to accept. Compare the practical options, the risks they control, their reliability and any new risks. Resource constraints should prompt escalation and safe planning, rather than an informal agreement to continue without an essential safeguard. Record the immediate protection and the person accountable for the longer-term change.
Workplace case
A manager adds a regulatory fine to “insured costs” and uses an invented tenfold multiplier for hidden losses.
Decision and explanation
How should the costing exercise be handled?
Use the stated costs and identify uncertain or uninsured items explicitly.
Transparent assumptions support decisions. Financial figures do not replace the moral or legal duty to protect people.
Leadership becomes visible when deadlines and protection compete. First establish the immediate exposure and the control that prevents harm. If a critical gate is absent, protect the affected area or suspend that part of the operation through the responsible site procedure. Avoid spreading disruption unnecessarily: unaffected work may continue within its own safe arrangements. Explain the boundary so people understand what has stopped and why.
Next arrange a feasible solution with the people who use the area. A redesigned route, suitable temporary segregation and verified access arrangements may be needed while a permanent repair is delivered. A reminder or high-visibility vest can support a safe system but does not physically stop a vehicle striking someone. Check who has authority to release the changed arrangement and what evidence they need.
Close the loop visibly. Thank the person who reported the defect, explain the interim measure, assign an owner and date, and return to observe the next delivery. Ask whether the route is actually usable at the busiest time and whether it creates an escape or access problem elsewhere. This is how leadership becomes more than a statement of intent. Use the block activity to distinguish a defensible response from a production-driven shortcut.
Workplace case
The gate repair will take two days. A senior manager offers to sign a waiver so loading can continue unchanged.
Decision and explanation
What does an effective leader do first?
Protect people from the uncontrolled interface and arrange a verified safe alternative.
A signature cannot prevent exposure. Immediate protection, accountable action and verification are required.
Incident triangles arrange events by outcome severity, often showing many lower-severity events below a small number of serious ones. Different historical studies used different definitions, populations and ratios. The numerical ratio in a teaching illustration is not a universal law for your workplace. It cannot establish that a fixed number of near misses will produce a fatality, or that removing minor injuries automatically removes major-accident risk.
Events can reveal common weaknesses, such as poor maintenance or work planning, but their exposure pathways may differ. Paper cuts in an office tell you little about whether a pressure vessel’s protective system will work. A serious loss-of-containment event may occur despite a long period with no lost-time injuries. Identify the hazards and barriers capable of producing the serious outcome, rather than treating low injury numbers as proof of control.
Use the triangle as a prompt to look below the visible outcome and learn from warning events. Keep severity, potential severity, exposure and control performance distinct. A dropped item that misses a worker can have high potential even with no injury. A minor injury still deserves care and learning, but its frequency must not distract resources from fatal and chronic health exposures.
Workplace case
A dashboard claims that reducing 300 minor events guarantees the prevention of one fatality.
Decision and explanation
What is the problem with that claim?
It treats a historical ratio as a predictive law and ignores different serious-harm pathways.
Prioritise actual major hazards and critical barriers; no triangle ratio guarantees a fatality outcome.
A count has meaning only when its definition and context are understood. Ten reports may reflect ten events, ten observations, several reports of the same event or a new willingness to speak up. Compare like with like. Establish the reporting period, hours or tasks exposed, workforce changes, event definitions and whether the reporting system changed. Do not use a rate without stating its denominator.
A rise in near-miss reports can be encouraging when confidence improves, but it can also reflect increased exposure or deteriorating control. Investigate the content: potential severity, repeated locations, recurring failed barriers and how quickly actions are verified. A fall may reflect genuine improvement, lower workload or suppressed reporting. Ask workers whether the data matches their experience.
Combine numbers with evidence from work. For the site with an unreliable isolation system, inspect its use, authorised isolation arrangements, maintenance and verification. For the site with new reporting confidence, examine action quality and recurrence. Neither a favourable graph nor a large reporting count is enough alone. The practical purpose is to decide what action will prevent harm and how to check that action works.
Workplace case
Near-miss reports double after a simplified reporting form is introduced, while hours worked also rise.
Decision and explanation
What should the manager examine?
Reporting confidence, exposure, report content and critical-control performance together.
Interpret the data in context and check the underlying conditions.
Lagging information describes outcomes already observed, such as injuries, illness, damage or losses. Leading information examines preventive activity or control condition before a harmful outcome. Completing inspections is an activity measure; the proportion of critical defects corrected and verified is closer to control performance. Neither is useful if checks are superficial or staff feel pressure to record a favourable result.
Choose measures linked to the hazard. For work at height, consider planned access, inspected edge protection, defects and unauthorised changes. For a health exposure, consider the control system’s performance and the appropriate exposure assessment or health-surveillance arrangements. Training completion can be a useful process measure, but it does not demonstrate that people can perform the task safely or that equipment is suitable.
Discuss findings with those doing the work. Sample the quality behind the number, identify repeat issues and escalate overdue serious defects. Avoid targets that make a person choose between honest reporting and looking successful. The block activity uses event cards to distinguish outcome, warning and control evidence. Your aim is an evidence-based management decision, not a mathematically perfect triangle.
Workplace case
All planned inspections are marked complete, but three failed protective gates remain open and unverified.
Decision and explanation
Which follow-up measure is most useful?
The condition, closure and verification of the failed protective gates.
Control performance and action quality matter alongside the number of checks.
This course uses Great Britain as its main legal baseline. The Health and Safety at Work etc. Act 1974 places duties on employers and others, while regulations add activity-specific requirements. Northern Ireland has its own framework, including the Health and Safety at Work (Northern Ireland) Order 1978 and separate regulations and enforcement arrangements. Fire safety and other duties also vary between UK nations. International learners must map the management principles to their local duties.
In Great Britain, an employer’s general duty concerns employees’ health, safety and welfare so far as reasonably practicable. Activities may also affect contractors, visitors and the public. Employees have duties to take reasonable care and cooperate; people must not intentionally or recklessly interfere with things provided for safety. These duties operate together. A contract or a worker’s signature does not simply transfer away an employer’s responsibility.
Senior people can incur personal liability in circumstances specified by law; holding a job title does not automatically prove an offence. For the course’s Section 37 example, an organisational offence and the relevant consent, connivance or neglect must be established. The manager’s practical response is to understand responsibilities, obtain competent advice and maintain workable arrangements, rather than memorise a slogan about personal prosecution.
Workplace case
A manager uses a Great Britain legal checklist unchanged for a Northern Ireland operation.
Decision and explanation
What needs checking?
The applicable Northern Ireland duties, regulations and regulator arrangements.
Apply the correct jurisdiction and specific duties; management principles do not make legislation interchangeable.
Distinguish legal requirements from ways of demonstrating compliance.
Acts and regulations establish legal requirements. Approved Codes of Practice have a special legal status in the relevant proceedings: if a relevant provision was not followed, the dutyholder may need to show compliance by another route. Guidance gives advice and examples; it is not automatically a separate legal requirement. Always read the status and scope of the particular document.
Civil proceedings and criminal enforcement serve different purposes. Compensation claims, insurance and contractual duties do not replace regulatory obligations. A prosecution does not require an injury in every case. Inspectors have statutory powers, including notices under the applicable legislation. The scope and effective timing of a prohibition notice follow its terms and the statutory test; do not assume every notice closes the entire business immediately.
A legal register helps identify applicable duties, who owns them and what evidence demonstrates implementation. It should reflect the actual activities, country and changes, rather than being a list of titles. For a contractor task, the useful evidence may include scope, hazard information, competence, coordination, control arrangements and release conditions. A document is evidence of an arrangement, but the arrangement must work in practice.
An improvement notice requires a contravention to be remedied within its stated period. Under HSWA section 37, a relevant company offence committed with an officer’s consent, connivance or attributable neglect can create personal liability. The corporate manslaughter offence concerns the way an organisation’s activities are managed or organised, including a substantial senior-management element in a gross breach causing death; all statutory conditions must be considered. Where section 40 applies to a qualified duty, the accused must establish that it was not practicable or reasonably practicable to do more. This does not transfer every element of every criminal prosecution to the defendant.
Workplace case
The organisation says that an ACOP is an Act and that any alternative method is automatically illegal.
Decision and explanation
Which explanation is more accurate?
An ACOP has special legal status; an alternative must still demonstrate compliance with the relevant law.
Distinguish the legal duty, the Code’s status and evidence supporting another compliant method.
Reasonably practicable is not a simple fifty-fifty balance or a test of what the current budget can afford. The judgement considers the risk and the sacrifice involved in further control; the gross-disproportion principle gives greater weight to protection where the risk is greater. Some duties use other legal tests, and an explicit requirement cannot be bypassed by assigning a low score. Obtain competent legal or technical advice where the duty is unclear.
Competence concerns the skills, knowledge, training, experience and other qualities needed for the specific role. Attendance on this course alone does not authorise electrical work, lifting supervision, asbestos disturbance or confined-space entry. Match the person’s capability and supervision to the task, including limits and escalation. A skilled operator may still need specialist engineering support for a changed process.
Before releasing the fictional intrusive task, define the work and people affected; reconcile information with the location; establish suitable controls and competence; and make coordination and stop triggers clear. Verify safeguards at the point of work. Do not write “if it is not recorded it did not happen” as a universal legal rule: records matter, but courts and investigators can consider other evidence. Equally, a complete folder does not prove safe performance.
An absolute duty has no practicable or reasonably-practicable qualification in its wording. Read the particular provision and its scope: do not label all training or all health and safety duties absolute. Portable electrical equipment, for example, needs a risk-based safe maintenance system; there is no universal requirement for every item to receive an identical annual PAT test.
Workplace case
A manager rejects essential protection solely because it exceeds this month’s maintenance budget.
Decision and explanation
What is the defensible response?
Assess the actual duty and risk, arrange protection or suspend the exposure, and escalate resources and competent advice.
Cost does not automatically cancel a legal requirement or justify uncontrolled exposure.
A slip is an unintended action that differs from the plan, such as selecting the wrong similar control. A lapse involves a missed action or loss of memory, such as omitting a step after interruption. A mistake involves an intended action based on an incorrect understanding or decision. These categories help ask better questions; real events can involve a mixture and should not be forced into one label.
A violation is a deliberate deviation from a rule, although the person may intend to complete the work rather than cause harm. It is not automatically sabotage. A routine deviation may have become accepted practice; situational pressures may make the written method difficult; an exceptional deviation may occur in unusual circumstances. The classification does not by itself establish blame, competence or disciplinary action.
Compare the two fictional cases. Redesigning a confusing interface and controlling interruption may reduce the selection slip. Repeating the same annual briefing may have little effect. A defeated guard requires immediate protection, investigation of why the shortcut is normal and a workable safeguarding system. Training may support a better method, but it cannot compensate for a control design that continually creates opportunity for error.
Workplace case
An operator intends to press Stop but selects the adjacent similar Start control after an interruption.
Decision and explanation
Which starting description fits the evidence?
An unintended selection slip, with interface design and interruption to investigate.
Distinguish intention from outcome and examine the conditions that made the action likely.
Performance influencing factors include workload, time pressure, fatigue, lighting, noise, interface design, instructions, available tools, competence, communication and supervision. Consider the job, the individual and the organisation together. “Carelessness” provides little explanation of why a reliable person made this error here and now.
Observe the task as it is performed, including recovery from interruptions, handovers and unusual conditions. Ask what information is visible at the decision point, whether the right tools are available and whether targets conflict with the safe method. A procedure requiring two people is unlikely to function if the staffing plan always supplies one. A supervisor who informally rewards shortcuts may undermine written instructions.
Changes can improve one factor while worsening another. An alarm may draw attention but add to an already overloaded control room. Extra gloves may reduce dexterity at a small control. Consult users and test the revised arrangement under representative conditions before wider adoption. Avoid promising that motivation, experience or a training record will eliminate error; make the system more tolerant of a foreseeable failure.
Workplace case
A jam-clearing procedure requires a second person, but production planning consistently provides a lone operator.
Decision and explanation
Which management factor needs attention?
The mismatch between the safe method and staffing/work planning.
A usable safe system needs the resources and conditions its steps require.
Protect people while investigating behaviour without premature blame.
Immediate protection comes first when someone is exposed to serious danger. An open question is useful once the situation is controlled; it must not delay stopping an unsafe movement or preventing access. Explain the concern calmly and remain within your role and site arrangements. Do not enter the danger area to demonstrate commitment.
Then ask the person to describe the task and what made the chosen action seem reasonable. Compare the accounts with equipment condition, procedures, workload, supervision and earlier reports. Avoid leading questions that supply an answer. Fairness means considering the evidence, foreseeable pressures and deliberate conduct consistently, while retaining accountability. It does not promise that every action will have no consequences.
Select improvements matched to the failure mechanism. Simplify or distinguish controls, provide safeguards, redesign the task, improve staffing and maintain practical rules. Test the revised method with users. Give feedback to the team and monitor whether the change removes the need for the workaround. The purpose of categorisation is better prevention, not collecting labels or treating “human error” as the final root cause.
Workplace case
A manager watches a worker reaching past a defeated guard and wants to begin a long coaching conversation while the machine runs.
Decision and explanation
What should happen first?
Control the immediate danger through the safe stopping and isolation arrangements, then discuss the work.
Coaching supports learning after immediate protection; it cannot replace critical safeguards.
Work-related stress concerns an adverse response to excessive pressures or other demands at work. The HSE Management Standards group relevant conditions as demands, control, support, relationships, role and change. These are prompts for examining how work is organised, not a checklist for diagnosing an individual. Conditions can interact; a change that increases one team’s control may increase another team’s workload.
Demands include workload, pace and the working environment. Control concerns the person’s say in how work is done. Support concerns resources and help from the organisation and colleagues. Relationships include unacceptable behaviour and conflict. Role concerns clarity and conflicting responsibilities. Change concerns how organisational change is managed and communicated. Translate each heading into observable work conditions and questions.
For the fictional supervisor, examine late planning changes, recovery time, conflicting priorities and access to help. Ask which decisions can be redesigned and what resources are needed. Individual coping strategies may help a person, but they do not remove an unmanageable workload or bullying. Involve workers and their representatives, protect confidentiality and use competent occupational-health or HR support where appropriate.
Workplace case
A team faces conflicting instructions from two managers. The only proposed response is a resilience poster.
Decision and explanation
Which work-design issue needs resolution?
Role clarity and conflicting priorities, with the team involved in workable arrangements.
Address organisational causes as well as offering support.
Changes in attendance, concentration, behaviour or performance can prompt a supportive conversation, but they do not prove a diagnosis or a cause. Ask privately how the person is managing work and what may help. Explain relevant safety concerns factually without demanding a medical history. Respect agreed confidentiality limits and the organisation’s arrangements for support and necessary escalation.
Where there is an immediate concern about a safety-critical task, adjust or pause that work through a fair, proportionate process. A person showing severe fatigue should not simply be sent back to drive or operate plant after an energy drink. Consider a safe alternative, transport or cover arrangements within the local policy. Do not make employment or clinical decisions on assumptions drawn from a short conversation.
Agree practical work adjustments, responsibilities and a review point with appropriate support. Record only necessary information through authorised systems. A manager is not expected to provide therapy. The course’s stress-container exercise is an optional metaphor for work pressures and support; learners should not have to disclose personal trauma or private health information to pass. Keep the discussion focused on work conditions and available help.
Workplace case
A worker makes uncharacteristic errors after several long shifts and says they cannot concentrate on a critical task.
Decision and explanation
What is a proportionate immediate response?
Arrange safe task cover or adjustment, listen privately and use the appropriate support route.
Protect the task and treat the person fairly without making an unsupported clinical judgement.
Fatigue can affect alertness, reaction and decision-making during day or night work. Consider shift duration and pattern, overtime, recovery opportunities, task demands, commuting and the timing of critical work. People differ, so a roster that appears compliant on paper may still create unsafe fatigue in practice. Check actual hours and work experience rather than relying on the planned rota alone.
Use preventive planning: adequate staffing, sensible schedules and recovery opportunities, appropriate breaks, handovers and escalation when fitness for a critical task is in doubt. Do not treat fatigue management solely as a worker’s responsibility to sleep better. A check-in application cannot make an overloaded lone engineer safe to undertake an otherwise unsuitable task.
Review the changes with the team. Examine whether overtime has genuinely reduced, tasks are covered, conflicting deadlines are resolved and people can raise concerns. Avoid interpreting low absence as proof of wellbeing; people may attend while struggling. The block workshop compares individual support with organisational control and identifies a practical action that a manager can own and verify.
Workplace case
Overtime is reduced on the roster, but workers still stay late unofficially to complete the same targets.
Decision and explanation
What should the manager check?
Actual hours, workload and the production plan, then revise the arrangements with workers.
Evaluate real work and control performance, not the appearance of the plan.
Plan, Do, Check, Act connects intentions with implementation and learning. Plan establishes the work, risks, responsibilities, resources and desired controls. Do puts the arrangements into practice with competent people and suitable equipment. Check examines whether they function and whether people remain exposed. Act uses the findings to correct weaknesses and improve the next plan.
A safety management system should be part of how the organisation runs work. It can use a recognised standard such as ISO 45001, but this course does not certify conformity with that standard. A small workplace may need simpler arrangements than a complex process site. Both need clear responsibility, consultation, practical controls and a way to recognise change.
Follow a machine-maintenance example. Plan the safe maintenance method and competent resources; perform it with verified isolation; check completion, defects and performance; and revise the schedule or design when repeated failures appear. A training record belongs within this system but cannot compensate for an absent guard or a known isolation defect. Ask how each part supports the task, not how many folders exist.
Workplace case
An audit identifies repeated failures, but no one changes the plan or equipment.
Decision and explanation
Which part of the cycle is missing?
Act: resolve the findings and improve the arrangements.
Checking must lead to suitable action and follow-up.
Explain the different purposes of management documents.
A policy sets direction, responsibilities and the organisation’s arrangements. A procedure explains how a repeatable process is managed. A safe system of work describes the task sequence, hazards, controls, people and conditions needed for the work to proceed. A risk assessment informs those controls. These documents overlap in purpose but should not be treated as interchangeable labels.
The task instructions should be usable by the people who need them: clear language, relevant diagrams, accessible formats and a level of detail proportionate to the work. Include important interfaces, checks, hold points and what to do when conditions differ. Test understanding through explanation or demonstration rather than relying only on a signature. Keep current versions available at the point of use.
Records help demonstrate what was planned, performed, checked and changed. They do not automatically prove effectiveness or guarantee a legal defence. Conversely, the phrase “if it is not written down it did not happen” is not a universal rule of evidence. The practical test is whether the organisation has suitable arrangements and credible evidence that they work. In the fictional case, overdue maintenance and ignored reports require action even if the policy looks excellent.
Workplace case
A worker receives a general policy instead of the task sequence needed for an unusual maintenance job.
Decision and explanation
What is needed before relying on the instructions?
A suitable task assessment and practical safe system, communicated and checked with the people involved.
The document must serve the actual decision and task.
Keep responsibilities connected when work, people or equipment change.
Changes can alter exposure without appearing dramatic. A new product, different load, temporary worker, altered layout or software setting can invalidate an assumption. Identify who authorises a change, what needs reassessment and who must receive the updated information. Check temporary arrangements and the point when the normal system is restored.
Contractor work requires coordination, relevant hazard information and clarity about boundaries and supervision. A contractor’s expertise does not mean the host can ignore shared routes, services, occupants or emergency arrangements. Agree the task, competence, access, isolation and release responsibilities before work begins. Make the response to deviation explicit.
An assurance chain connects intent, assessment, method, resources, performance evidence and corrective action. A missing link may be a failed physical control rather than a missing sheet of paper. Use the block’s document puzzle to locate what each record can demonstrate and what still needs observation. Close actions with evidence of implementation and effectiveness, not just a purchase order or a completed training slide.
Workplace case
A new chemical is introduced through purchasing, but the old task assessment and glove selection remain unchanged.
Decision and explanation
Which process needs to happen?
Assess the change, update suitable controls and brief/check the affected users before reliance.
Change control should reach the actual task and its safeguards.
A hazard has the potential to cause harm. Risk concerns the likelihood and seriousness of harm in the circumstances. A useful description identifies what can cause harm, who can encounter it, the exposure or event and the resulting injury or ill health. “The saw” is a label; cutting concrete beside unprotected workers with airborne dust and a moving blade describes pathways that can be controlled.
Consider ordinary use, cleaning, maintenance, refuelling, blockages and foreseeable change. Some pathways produce immediate injury while others create cumulative exposure. Include people nearby and those who arrive later, such as cleaners disturbing settled dust. Do not invent an exposure concentration or diagnosis from a photograph. The stated case evidence supplies conditions; actual work needs observation and relevant assessment.
A risk assessment should lead to action. If the source is described vaguely, controls often become vague too. A dust problem may require eliminating on-site cutting, selecting a lower-exposure process or effective source control. A blade-contact hazard needs suitable equipment, guarding, a controlled task and competence. Keep related pathways visible without pretending one generic “be careful” instruction resolves them all.
Workplace case
The assessment lists only “saw: injury” and assigns one low score to the whole task.
Decision and explanation
What would make the entry more useful?
Describe each significant harm pathway and the relevant people, conditions and controls.
Specific pathways support effective control decisions and justified ratings.
Explain the six prompts without confusing them with a separate hierarchy.
This programme uses ERICPD: Eliminate, Reduce, Isolate, Control, PPE and Discipline. Eliminate asks whether the hazardous activity or exposure can be removed. Reduce looks for a less hazardous material, process or amount of exposure. Isolate separates people from the source. Control includes suitable engineering and organisational measures for the remaining task. PPE protects the wearer against remaining exposure. Discipline means sustaining the safe arrangements through competence, communication, supervision and review.
The prompts overlap; they are not six independent boxes to fill or a rule that every task needs one example of each. Sustaining a control supports all the other measures. The separate five-level hierarchy uses elimination, substitution, engineering, administration and PPE. Do not combine those five levels with ERICPD into a new official ranking. Explain what the selected measure actually achieves.
For the cutting task, ordering correctly sized components may eliminate site cutting. A suitable alternative process can reduce exposure. A controlled cutting area and physical separation can isolate others, while source controls and a competent method manage remaining risks. Suitable respiratory, eye and hearing protection may still be needed after assessment. PPE works by preventing or limiting exposure or its effects; it is incorrect to say it only acts after harmful contact has already occurred.
Workplace case
A team calls a respirator “elimination” and says Discipline means punishing anyone who reports a problem.
Decision and explanation
Which explanation is sound?
PPE manages remaining exposure; Discipline sustains effective arrangements and reporting across the controls.
Use ERICPD to improve protection, not as a justification for blame or weak controls.
A proposed measure becomes protection only when it is suitable, implemented, used and maintained. State who verifies it and what evidence supports release. A drawing, quote or training booking is a plan, not proof that the control works today. Consider whether the change creates another risk, such as a segregation barrier blocking escape or hearing protection masking necessary warning signals.
Critical controls deserve explicit performance expectations. Define the function, the conditions in which it must operate, how it is checked, what failure looks like and what response follows. Keep people out of the affected exposure when essential protection is absent or uncertain. Restart is a separate responsible decision after the relevant evidence is established; a reduced target score or a signature cannot perform that function.
Use team knowledge to make controls workable. Ask how the method behaves during a busy period, equipment failure or a change in personnel. Provide an alternative to a method that routinely encourages workarounds. The block workshop applies ERICPD to the saw case, and its independent check asks whether the manager has enough evidence to release the task. Learning points and completion ticks cannot compensate for an unsafe decision.
Workplace case
The dust suppression system is installed, but no one has checked whether it is suitable and functioning during the actual cut.
Decision and explanation
Can the lower planned dust risk be treated as verified?
No; verify suitability and effective operation before relying on the measure.
Implementation and performance both need evidence; source control and any further protection must match the task.
An organisational assessment considers significant risks to the business and the people it affects across its operations. It helps allocate resources, decide priorities and identify where specialist or local assessment is required. Strategic disruption, capability and major-hazard exposure may sit at this level. It does not describe every step needed to carry out a particular hazardous job.
An activity or generic assessment considers a repeatable operation, such as receiving deliveries or routine cleaning, under defined assumptions. It can establish common hazards and controls across similar tasks. Its usefulness depends on those assumptions matching the actual work. A generic template is a starting point to check and adapt, not evidence that a different site or changed process is safe.
The levels should inform each other. Repeated defects in a local vehicle route may reveal an organisational maintenance or investment problem. A strategic commitment to improve transport needs delivery through actual layouts, methods and supervision. In the case, ask who owns each decision, what information passes between levels and what change means the original assessment can no longer be relied on.
Workplace case
A company risk register says transport is a priority, but a supervisor treats it as the task instructions for a complex delivery.
Decision and explanation
What is missing?
A suitable local/activity and task assessment with usable controls for the delivery.
Different levels address different decisions and need to connect.
A task-specific assessment addresses the circumstances of a defined job: location, equipment, sequence, people, interfaces and changing conditions. A non-routine maintenance intervention, a complex lift or work affecting occupied premises may need more detailed planning and specialist input. The existence of a familiar activity name does not make the task generic.
Use the assessment to develop a safe system that people can follow. Establish the prerequisites, competent roles, isolations, access, protection, communication and emergency arrangements. Some work requires permits or other formal authorisation under the site system. A permit records and coordinates agreed conditions; it is not a replacement for assessing the task or verifying safeguards.
Before the repair, compare the actual plant and access with the plan. Confirm stored energy, shared services, nearby operations and the restoration sequence. Identify hold points where work must pause for a responsible decision. Do not allow a dynamic check to become a substitute for missing engineered protection, specialist information or a required rescue plan. The job can be stopped and replanned without requiring the person at the workface to improvise a technical solution.
Workplace case
A tank-entry team proposes using a generic cleaning checklist plus a quick verbal check instead of planning access and rescue.
Decision and explanation
Which response is appropriate?
Hold the entry and establish the required task-specific, competent and emergency arrangements.
The actual hazards and required safeguards determine the depth of planning.
A dynamic or point-of-work assessment compares the planned work with the conditions now. It asks whether the task, people, equipment, environment and safeguards still match the authorised method. Some settings use a Take 5 card or application. The useful output is a decision and any escalation, not the number of seconds spent looking at a screen.
A change may be within an agreed safe envelope, or it may require stopping and revising the plan. Rain that makes access unreliable, unexpected services, a missing guard or a lone worker without contact are reasons to challenge assumptions. The person should know which changes they can manage within their competence and which need the supervisor, permit issuer or a specialist. Do not invent new limits at the workface.
After resolving the change, brief affected people and verify the revised arrangement before a separate release. Capture repeated changes so the underlying generic or organisational assessment can improve. A simple low-risk task may need proportionate arrangements, while a highly hazardous unique job needs detailed preparation. The block’s sorting exercise includes overlapping cases: select the main planning level and explain which other levels still support it.
Workplace case
Heavy rain changes the planned route to a plant repair just before the team starts.
Decision and explanation
What does a useful point-of-work check do?
Compare the changed route with the safe plan and hold/escalate if its conditions are no longer met.
Dynamic assessment is a final reality check connected to planning and responsible change control.
Use the programme’s training scale consistently and recognise its limits.
This programme uses a five-point likelihood and severity scale for learning. Likelihood runs from 1 very unlikely to 5 very likely. Severity is 1 minor first-aid harm, 2 minor injury/ill health, 3 serious injury or illness, 4 single fatality or life-changing permanent harm, and 5 multiple fatalities. These are training descriptors, not a universal standard or measured probabilities. Use the method adopted for the actual workplace when undertaking real work.
Define the scenario before choosing factors. State the people, source, event and existing controls. Consider how often exposure occurs, how reliable the safeguards are and what credible harm could result. Rare exposure does not automatically make the consequence minor. Do not use an average minor outcome to dismiss a credible fatal event, or assume the most extreme imaginable outcome without a plausible pathway.
The initial score describes current conditions with controls that actually exist. An order for a new guard is not an existing safeguard. Record uncertainty rather than pretending a photo or a calculator provides measurement. Specialist topics may require methods beyond a simple matrix. Agreement between colleagues can improve reasoning, but consensus does not make an unsupported assumption true.
Workplace case
The task is rare, so a manager assigns severity 1 to a credible fatal contact with live equipment.
Decision and explanation
Which factor has been confused?
Frequency and likelihood have been used to dismiss the seriousness of the possible harm.
Separate how likely the event is from how serious its credible outcome can be.
Risk rating is likelihood multiplied by severity. L4 × S4 gives R16; L3 × S4 gives R12. Addition, averaging and subtraction do not produce the score in this method. The possible products are 1, 2, 3, 4, 5, 6, 8, 9, 10, 12, 15, 16, 20 and 25. A result such as 7 or 18 signals an arithmetic or transcription problem.
The programme’s action bands are 1–8 low/monitor, 9–15 action required, and 16–25 high/stop the affected work until adequate controls are established. This is the SLS training convention, separate from the earlier IOSH project guide and the SHARErisk organisational lookup. Do not silently switch between their scales, labels or action rules.
The bands do not authorise exposure. A low product cannot waive a specific legal precaution or an essential barrier, and a medium product may still require immediate protection. The grinding case cannot proceed merely because two people agree R8 while the guard is missing and ignition is credible. Protect people, address the gap and use competent advice. The number supports prioritisation; the harm pathway and actual control condition determine the decision.
Workplace case
A team obtains R8 but identifies a missing essential guard and a credible serious injury pathway.
Decision and explanation
What governs the immediate decision?
The missing essential protection and actual danger must be resolved; the low band is not permission.
Critical controls and applicable duties override a reassuring colour or score.
Calibrate by comparing the same scenario and descriptors, then discussing the evidence. Ask which exposure, event, outcome and safeguards each scorer assumed. A disagreement may reveal that one person scored an unguarded task while another assumed the new guard was installed. Resolve those facts before debating a number. Retain material uncertainties and the need for competent judgement.
Residual risk estimates what remains after additional measures are implemented and effective. It is conditional until that evidence exists. A redesigned guard may reduce the chance of contact without changing the injury possible if contact occurs. A less harmful substance can change the consequence as well as the exposure, but only where its actual properties and use support that judgement. Do not automatically set both factors to 1 after a briefing.
In the workshop, first identify immediate protection, then compare elimination, a suitable process and engineering safeguards, organisational measures and PPE. Re-score only after explaining the control function. Assign an owner, timescale and verification. A low target is not an action closure or restart decision. If the remaining risk is not adequately managed, improve the plan instead of manipulating the factors.
Fictional warehouse crossing: pedestrians repeatedly enter a forklift route. Existing paint, horn and instructions do not provide reliable separation. The group justifies likelihood 4 and severity 4 (credible single fatality), giving initial R16: hold the affected operation and protect people.
The responsible facilities manager coordinates a suitable separated route and delivery method with the team and competent support. Protection is required before release, with safe temporary arrangements meanwhile. Inspect the installed barriers and crossings, check escape and access, and observe a representative delivery. After those conditions are verified, likelihood 1 with severity 4 may be a justified target R4. The potential fatal consequence has not disappeared.
R4 is conditional on effective separation and the actual exposure evidence. If a barrier is removed or the route changes, stop and reassess. A low target score cannot stand in for the physical control, a competent decision or continued checks.
Workplace case
The team lowers today’s likelihood because a protective enclosure will be delivered next week.
Decision and explanation
How should that lower value be described?
A conditional target after implementation and verification; current exposure needs protection now.
A proposed control cannot be treated as effective today.
Describe a bowtie without confusing the hazard, loss of control and harm.
Explore a completed light-bulb bowtie
Follow a familiar task, then apply the same reasoning to the forklift example below. Select the threats, controls, event, consequences and dependencies for an explanation.
Original SHAREhub qualitative teaching example. It does not verify controls, calculate risk or authorise work.
A bowtie is a structured way to discuss how control over a hazard can be lost and how consequences can be prevented or limited. The hazard is the source of potential harm. Threats can lead to a top event, which is the defined loss of control. Consequences are the credible harmful outcomes after that event. Keep the scope specific enough for meaningful barriers.
In the forklift example, the hazard includes the vehicle’s movement and energy. A top event might be unintended movement or loss of controlled movement in the defined operating area. A brake defect is a threat; a person being struck is a consequence. Changing the top event mid-discussion makes it difficult to decide which barriers work before or after it.
A matrix can summarise a risk judgement, but it does not describe a complex major-accident scenario sufficiently on its own. A bowtie also has limits: drawing a barrier does not prove independence, reliability or adequacy. Some processes need specialist hazard analysis, quantitative methods and engineering assurance. Use the diagram to ask precise questions and connect the discussion to real control standards.
Workplace case
A bowtie places “serious injury” in the centre and treats the same injury as a threat.
Decision and explanation
What needs clarification?
Define the hazard, a specific loss-of-control top event and the resulting consequences separately.
Clear definitions make the position and function of a barrier understandable.
Preventive barriers sit between a threat and the top event: they aim to stop the loss of control. Mitigating barriers sit between the top event and a consequence: they aim to limit harm after control is lost. The same equipment can have different functions in different scenarios, so explain its role instead of classifying it only by name.
For a defined vehicle scenario, effective brake maintenance and defect isolation may prevent loss of controlled movement. Physical segregation may prevent a pedestrian being exposed to an out-of-control vehicle’s path or limit that consequence, depending on the top event and layout. Emergency response may limit some consequences but does not prevent the initiating movement. A line on the floor cannot be assumed equivalent to a suitable physical barrier.
Examine dependency and common failure. Two checks performed by the same rushed person using the same missing information may not be independent barriers. A power loss, maintenance error or organisational pressure can weaken several controls together. Do not multiply imagined probabilities to claim a numerical risk reduction. Ask whether the barrier’s function, suitability and continued availability are supported by evidence.
Workplace case
Two signatures rely on the same incomplete equipment check and are described as two independent protective systems.
Decision and explanation
What should the manager question?
Their common dependence on the same information and failure mechanism.
Barrier count is not the same as reliable independent protection.
A critical control is a measure whose absence or failure can materially increase the risk of a serious or fatal outcome in the specified scenario. Its failure does not guarantee that harm will occur, and its importance is not determined by cost or document length. Identify why it is critical and the harm pathway it interrupts.
Define the required function, owner, performance expectation, inspection or test and failure response. “Guard in place” may be insufficient if it can be bypassed or is unsuitable for access. “Rescue arranged” needs competent people, equipment, communication and realistic response arrangements. The manager’s assurance question is what evidence supports reliance on the control now.
When an essential barrier is absent, failed or unverified, protect people and use the authorised hold/escalation route. Do not allow a low overall score, a second administrative sign-off or production pressure to substitute for it. After repair or change, verify function and release through a separate responsible decision. The block workshop asks you to build the logic and identify the weakest assumptions, rather than produce a decorative bowtie.
Workplace case
A critical interlock’s test is overdue and its actual function is uncertain.
Decision and explanation
What supports a release decision?
Suitable verification of the required safeguard and the authorised decision, after protecting the affected exposure.
A diagram is an assurance prompt, not proof that a safeguard works.
First consider avoiding work at height where reasonably practicable. If it cannot be avoided, select suitable means to prevent falls before relying on measures that only limit their consequences. Access equipment, edge protection and the work platform must suit the task, people and conditions. A harness is not a complete plan without suitable anchorage, compatibility, competence and rescue arrangements.
Fragile surfaces, rooflights and openings may not be obvious. Do not infer strength from appearance, dry weather or where someone previously walked. Avoid access to a fragile surface where possible; otherwise a competent plan must provide appropriate access, fall prevention/protection and rescue. Crawling boards alone are not a universal solution. The manager’s role is to verify a suitable system, not design one from an awareness lesson.
Lifting operations need planning by a competent person, appropriate supervision and safe execution. Consider load, lifting points, accessories, equipment capacity in its actual configuration, ground/support, people and communication. The danger area can extend beyond the point directly below the load through swing, collapse or falling material. Keep people out of the assessed envelope. An attachment or lifting aid must be manufacturer-approved/suitably engineered; improvising an extra load on a MEWP can introduce instability.
Before release, check the defined scope, competence, equipment and protection. Stop for changed loads, damaged equipment, unstable support or conditions outside the plan. Do not assume a certificate or a quoted safe working load covers every configuration and activity.
Workplace case
An engineer proposes attaching an improvised hoist to a scissor lift to handle a heavy light fitting.
Decision and explanation
What must be established?
A competent, suitable and authorised load-handling/access method within the equipment’s limits.
Assess suitability, stability and approved arrangements; do not improvise lifting attachments.
Electrical work should be planned to avoid danger, including secure isolation and verification by appropriately competent people. Identify the correct equipment and all relevant energy sources; prevent inadvertent reconnection and verify the required safe condition before work. A switch, warning tag or emergency stop alone is not proof of isolation. Arc-flash and other electrical risks require appropriate assessment and competence; ordinary PPE or an RCD cannot guarantee protection.
Stored mechanical, hydraulic, pneumatic, thermal or gravitational energy may remain after electrical disconnection. The safe method must address those sources, including supported loads and trapped pressure. Do not release tension or pressure without a competent sequence: making stored energy safe can itself cause harm. Personal and group isolation arrangements need clear control, keys and restoration responsibilities.
A confined space is identified by the degree of enclosure and a specified foreseeable serious risk, not room size or the lack of a window alone. Avoid entry where possible. Where entry is necessary, suitable assessment, isolation, atmosphere controls/monitoring, competence, communication and planned rescue are needed. Do not improvise an entry or rescue because someone is in trouble. Calling emergency services is important in an emergency, but cannot be the whole preplanned rescue arrangement.
For an unfamiliar plant room or tank, a manager should protect access, establish information and obtain competent assistance. This course does not authorise testing for dead, gas testing, confined-space entry or rescue. A permit records agreed conditions; it does not create missing safeguards.
Workplace case
A worker presses an emergency stop and reaches into a jammed conveyor with stored belt tension.
Decision and explanation
What is missing?
Verified secure isolation and a competent method for all stored energy before access.
An emergency stop is a protective stopping function, not a complete isolation or stored-energy control.
Fire prevention considers ignition sources, fuel, oxygen where relevant, and the way work can create or spread a fire. Maintain suitable escape arrangements, detection/alarm, emergency roles and measures appropriate to the premises and nation. Different extinguishers and response arrangements have limits. Awareness training does not authorise firefighting, hot work or entry into smoke.
Where dangerous substances can create fire or explosion risk, a competent assessment considers the substances, release conditions, ignition control and protective measures. Equipment selection must suit the actual hazardous area, substance group, temperature and protection requirements. Intrinsic safety is one protection concept, not the only permitted type of equipment. “Non-sparking”, a colour or an ATEX label alone does not establish suitability. Do not operate switches or enter a suspected hazardous atmosphere to investigate without the appropriate arrangements.
Transport planning prioritises removing unnecessary interactions and separating people from vehicles where possible. Consider visiting drivers, blind spots, reversing, doors, crossings, loads and people working on vehicles. A trained signaller may support an assessed system, but is not automatically equivalent to physical segregation. Their safe position, visibility, communication and escape must be planned.
Before the combined maintenance task, reconcile lifting, isolation, fire and traffic boundaries. Prevent incompatible work and communicate changes to all affected parties. Stop when an essential control is absent or conditions move outside the plan. Restart requires evidence and an authorised decision, not simply a revised score.
Workplace case
Hot work is proposed beside a possible solvent vapour release, while pedestrian access through the area remains open.
Decision and explanation
What is the manager’s first responsibility?
Hold the incompatible exposure, protect access and obtain the competent assessment and controls before release.
Control the sources, interfaces and essential barriers before relying on consequence measures.
Hazardous substances can affect health through inhalation, skin or eye contact, ingestion or other relevant routes. The importance of a route depends on the substance and activity; there is no universal answer that one route is always the most common. A safety data sheet provides product information, but the actual task assessment must consider concentration, amount, frequency, use and existing protection.
Prevent exposure where practicable and control it adequately where it remains. Consider eliminating the process, a genuinely safer substitute, enclosure and suitable source control before relying on procedures and PPE. Verify ventilation or extraction performance and maintain the system. A product replacement can introduce new hazards, and a generic glove material is not suitable for every chemical. Select protection from the actual product/task evidence and competent advice.
Asbestos and respirable crystalline silica remain current risks. Do not teach asbestos as only historical or silica as only a future problem. Disease can have a long latency, while some exposures also cause acute harm. Suspected asbestos needs the correct information and specialist arrangements before disturbance. Concrete cutting can require suitable water suppression or on-tool extraction and additional assessed measures; neither a paper mask nor “any P3 filter” is a complete control plan.
Where tight-fitting respiratory protection is selected, suitability, fit testing, clean-shaven sealing areas where required, maintenance and correct use matter. Filters do not supply oxygen. Managers should recognise uncertainty and obtain competent occupational-hygiene advice rather than diagnose exposure from a photograph.
Workplace case
A team proposes a particulate filter for an unknown solvent atmosphere where oxygen may be deficient.
Decision and explanation
What is the appropriate response?
Prevent entry/exposure and obtain the competent substance, atmosphere and emergency assessment.
Particulate filtration does not solve every gas, vapour or oxygen-deficiency hazard.
Noise can damage hearing through repeated exposure and, in some circumstances, a single intense event. Consider equipment selection, source reduction, enclosure, layout, maintenance and exposure organisation. Hearing protection must suit the assessed exposure and task, including compatibility and communication needs. An SNR label alone does not tell you the actual level at the ear or guarantee a safe outcome.
Hand-arm vibration can affect circulation, sensation and function. Tingling, numbness or blanching can be warning symptoms requiring prompt reporting and appropriate assessment; this course does not diagnose their cause. Assess exposure from the actual tools, task, use pattern and data, including uncertainty. Reducing trigger time without changing the process may be part of a plan, but must not replace feasible stronger measures.
Choose lower-vibration processes or tools, maintain equipment and consumables, support an efficient suitable method and manage remaining exposure. Anti-vibration gloves do not provide a reliable general solution. Do not pressure workers to ignore symptoms or keep using a tool to complete an allowance. Use the appropriate occupational-health referral and surveillance arrangements where required.
Health surveillance helps identify effects and inform review; it is not a substitute for controlling exposure and cannot prove the task is safe. Review the actual control performance and respond to concerns even when injury statistics are favourable. Keep individual health information private and use authorised professional routes.
Workplace case
The manager buys ear defenders based only on the largest SNR number and treats normal hearing checks as proof of adequate source control.
Decision and explanation
What needs improvement?
Assess source/exposure controls and select suitable hearing protection, using health surveillance as additional information.
Protection and surveillance have different functions and need task-specific judgement.
Manual handling includes lifting, lowering, carrying, pushing and pulling. Consider avoiding hazardous handling where practicable; assess unavoidable work and reduce the risks. Task, individual, load and environment are useful TILE prompts, often extended to include other factors. Observe repetition, reach, posture, force, grip, routes, equipment and recovery. There is no single safe load mass for every person or task.
Improve the work at source: delivery size, mechanical assistance, receiving height, layout, access and workflow. A handling aid can create pushing, trapping, maintenance or stability risks and needs assessment. Technique training may support the suitable method, but “bend your knees” is not a complete risk-control strategy. Do not assume two people can safely lift any load or that a medical condition should be disclosed in a classroom.
Include DSE and repetitive work where relevant. A usable workstation, task variation and appropriate assessment can support comfort and performance, but pain is not diagnosed by the model. Investigate reports and use the organisation’s competent support arrangements. Adjustments should suit the individual and task, with privacy respected.
In the block workshop, match exposure to the required control function before discussing PPE. A respirator cannot remove a handling load; gloves cannot make an unsafe route adequate; surveillance cannot remove dust. Record how the selected change reduces the pathway and how its continued performance will be checked.
Workplace case
An awkward repeated floor-to-bench lift remains unchanged after a kinetic-lifting briefing.
Decision and explanation
What should the manager examine first?
Avoidance, load/pack size, work height, layout and suitable handling assistance.
Task redesign and assessed assistance address the source and exposure.
Work equipment must be suitable for its use and accompanied by the measures required for the risks. Consider selection, installation, guarding, control systems, inspection, maintenance and the information and competence needed. A fixed guard prevents access when correctly designed and secured; removing it for access changes the task and protection. A warning sign cannot replace an essential guard.
An emergency stop is intended to help stop dangerous operation quickly. It is not the normal proof of safe isolation and may not remove every energy source or stored force. Interlocks also have a defined protective function and are not a universal isolation method. Before intervention, use the competent method for identifying, securing, releasing or restraining and verifying all relevant energy.
The remote pump could have electrical, pressure, hydraulic, thermal or gravitational hazards. Do not assume that silence or a stopped motor means zero energy. The learner’s role is to recognise the need for competent preparation, safe access, authorisation and emergency arrangements, not to perform an unfamiliar isolation or release. Work should wait when those prerequisites are missing.
After maintenance, restore guards and protective systems, verify the equipment is safe and use the responsible restart process. Consider everyone affected by re-energisation. The end of the repair is another managed transition, not an automatic consequence of removing a padlock.
Workplace case
The engineer plans to press Stop, remove a guard and investigate the pump alone.
Decision and explanation
Which distinction matters?
Stopping operation is different from verified safe isolation and control of stored energy.
Prepare intervention through the suitable competent system before exposure.
Slips, trips and falls can arise from contamination, obstructions, floor condition, lighting, footwear and work organisation. A wet entrance or a trailing cable describes a condition; the assessment should connect it to who uses the route and how harm could occur. Include people carrying loads, cleaners, visitors and those with particular access needs.
Protect unsafe routes and address the source within the authorised system. A cone warns but does not remove water or prevent every entry. Unknown spills need the relevant information and trained response. Choose repairs, cleaning arrangements, waste collection, cable routing and safe alternatives that fit actual use. Check that a barrier or mat does not create another trip, escape or accessibility problem.
Poor housekeeping can indicate a planning or maintenance weakness, but a photograph does not prove a whole organisation’s culture or identify a guilty team. Ask why the condition exists and repeats. A full bin may reflect capacity or collection timing; a blocked route may reflect a layout or delivery plan. Observe busy periods and the next shift before declaring the action effective.
For the pumphouse, lighting and access affect safe intervention and emergency response. A working phone does not compensate for an unsafe route. Establish a safe work envelope and inspect what the planned method depends on. The manager must coordinate environmental, equipment and human factors together.
Workplace case
A blocked walkway is cleared every morning but packaging builds up again during each dispatch peak.
Decision and explanation
What is the useful next question?
Which workflow, bin capacity or removal arrangement allows the obstruction to recur?
Look for the cause and verify a sustainable arrangement during actual work.
Decide whether the task is suitable for lone working and what support must function.
Lone working requires an assessment of whether the task can be carried out safely without close assistance. Some activities should not be undertaken alone. Consider the work, location, time, competence, access, health-related needs handled appropriately, communication and foreseeable emergencies. A check-in schedule is one part of a system, not permission for an otherwise unsuitable high-risk intervention.
Where contact is required, establish who receives it, the intervals and events that trigger contact, how a missed check is escalated and how assistance can actually reach the person. Test coverage and fallback arrangements. A panic alarm has little value if nobody is monitoring it or the response cannot arrive. Consider fatigue, shift length and safe travel as part of the complete assignment.
Public-facing and remote work can also involve violence or aggression. Consider service design, staffing, information, layout, safe exits, appropriate security and support after an incident. De-escalation training can help but does not remove every foreseeable threat. Workers should know when to disengage and obtain help rather than being expected to tolerate abuse.
For the night repair, the manager should challenge urgency, suitability for lone work, energy control, lighting, fatigue and response. Defer or arrange competent supported work when the prerequisites are missing. Do not send the engineer simply because a phone application can record a check-in.
Workplace case
The only proposed control for the 23:00 repair is an untested phone app, with no response person assigned.
Decision and explanation
What should happen?
Reassess suitability and arrange the competent work, access, communication and response prerequisites before release.
A lone-working system must be viable and the task itself suitable.
A safety tour can build understanding of actual work and how arrangements function. An inspection examines specified conditions or controls. An audit evaluates evidence against defined criteria and the effectiveness of arrangements. The labels are useful only when the purpose, scope, competence and follow-up are clear. None proves that every risk is controlled merely because it took place.
Prepare by identifying the significant hazards and the evidence you need. Look at ordinary, busy and unusual conditions. Include worker experience and records, but compare them with the workface. Sampling should be risk-informed: checking only clean, quiet areas can miss the most important exposure. Be clear about what was and was not examined.
Record findings precisely, distinguishing a fact, an uncertainty and a conclusion. “Guard absent on machine X during the observed task” supports action. “Bad culture everywhere” is not justified by one photograph. Assign suitable immediate protection, a responsible owner and a due date. Return to verify implementation and effectiveness. A completed checklist is the beginning of follow-through, not automatic closure.
Workplace case
An audit records only that a policy exists, although the question concerns whether its isolation process works.
Decision and explanation
What additional evidence is needed?
Relevant implementation and performance evidence from actual work, people and records.
Match evidence to the management question and control function.
When immediate serious danger exists, act through the safe stopping and protection arrangements before a coaching discussion. Once the exposure is controlled, explain the observation factually and ask the worker to describe the task. “Can you talk me through how this is being done?” is more useful than beginning with an accusation. Listen for practical constraints and information the written method missed.
Explore the difference between intended and actual work. Ask what normally happens when the equipment jams, whether the correct tools are available, which targets compete and how earlier concerns were handled. Avoid leading the person towards the answer you want. A manager should remain curious while being clear about essential safety boundaries and responsibilities.
Agree a workable change and check understanding. If a method needs redesign, staffing or specialist review, identify who will arrange it and how work will remain protected in the meantime. Thank the person for explaining the difficulty and report back. Fair treatment and accountability can coexist; a supportive conversation is not a promise to ignore deliberate harmful conduct or an excuse to leave a failed control in service.
Workplace case
A manager begins by asking “Why are you careless?” while a dangerous machine continues to run.
Decision and explanation
What would improve the response?
First control the exposure, then ask factual open questions about the task and pressures.
Protection and respectful inquiry are both necessary, in the right order.
Leading measures can track preventive activity and control condition; lagging measures describe outcomes such as injuries, illness, damage or loss. Training attendance and inspection completion are process measures. They are useful only alongside evidence of understanding and control performance. “No accidents” can reflect luck, low exposure or suppressed reporting as well as genuine improvement.
Choose a small set tied to important scenarios. For a vehicle interface, examine separation, repeated incursions, defects and verified action closure during deliveries. For a harmful exposure, examine the suitable control system, actual exposure information and appropriate professional follow-up. Investigate what favourable or unfavourable trends mean before changing incentives.
Close an action when the agreed measure is implemented and suitable evidence shows it works. A quote, purchase order or photograph of installation may be incomplete evidence. Set a later performance check where needed and communicate the outcome. If the problem recurs, revisit the cause and the adequacy of the change. The roleplay workshop asks for a safe opening, useful questions, a practical agreement and a way to verify it.
Workplace case
The action log marks a new barrier complete when purchasing raises an order.
Decision and explanation
When should the protective action be closed?
After suitable implementation and verification, with continued checks where needed.
Administrative progress and effective protection are different facts.
Begin with what happened, who was exposed, the actual outcome and the credible potential outcome. An accident commonly describes an event causing injury or ill health. A near miss describes an event that could have caused harm but did not. Organisations may use incident as an umbrella term, or for particular damage or process events. Agree the local definitions rather than treating different vocabulary as a reason to exclude a report.
The falling pallet is worth reporting even if no person was in its path. The damaged pallet, load instability, movement and location may reveal a serious transport or storage problem. Do not require a worker to calculate a perfect potential severity before raising the concern. Make the immediate area safe through the responsible site arrangements, notify the supervisor and record a factual account. Protect people before collecting photographs or interviewing witnesses.
Capture the task, time, location, sequence, people affected, equipment, controls and conditions. Separate direct observation from inference. Preserve evidence safely, protect personal information and avoid circulating identifiable injury images in a general chat. Internal reporting should include concerns about symptoms, exposure, unsafe conditions and control failures as well as discrete accidents. The responsible manager then triages urgency, specialist help, investigation depth and external reporting duties. Internal reporting does not replace emergency action or a statutory notification.
Workplace case
A supervisor rejects a report because the falling object missed the worker.
Decision and explanation
What should happen?
Record and assess the event and its potential harm, alongside immediate protection.
Learning and prevention need information about control failures before someone is harmed.
Use the relevant legal criteria rather than reporting every injury or dismissing every near miss.
Separate Great Britain and Northern Ireland reporting routes
The reporting graphic separates location, serious categories and day-count rules. Check the current official route.Read and interpret the visual
Classify the event and jurisdiction before applying a day count.
For the stated incapacitation category, GB records over three days and reports over seven; NI has its own over-three-day reporting route.
Check deaths, specified or major injuries and other reportable categories promptly. Internal reporting remains important even when RIDDOR does not apply.
In Great Britain, RIDDOR requires the responsible person to report specified work-related injuries, occupational diseases and dangerous occurrences that meet the applicable criteria. Not every workplace injury is reportable. Some dangerous occurrences are reportable without an injury. An ordinary near miss does not become a listed dangerous occurrence simply because its potential outcome was serious. Use the actual category and facts.
For workers, a work-related specified injury, such as an amputation, may be reportable. An accident leaving a worker unable to perform normal duties for more than seven consecutive days may also be reportable. Exclude the day of the accident but include rest days and weekends. Over-seven-day reports must be made within 15 days of the accident. Most specified injuries and dangerous occurrences require notification without delay and the report within ten days. Other categories, including diagnosed occupational diseases, have their own criteria. Check the current HSE instructions and obtain competent help where the facts are uncertain.
Keep an internal record and investigate proportionately even when the external reporting threshold is not met. Do not delay urgent action while deciding which online form to use. Identify who in the organisation is responsible for deciding and reporting, who covers their absence and what information they need. Northern Ireland has a separate regulator and reporting legislation: do not transfer GB thresholds and forms automatically. This programme teaches the decision process, not an exhaustive list for every sector or special reporting regime.
Workplace case
A GB worker is unable to do normal duties for eight consecutive days after a work-related accident, excluding the accident day.
Decision and explanation
Which response is appropriate?
The responsible person checks and makes the required over-seven-day report within the applicable deadline.
The GB over-seven-day test includes consecutive rest days and weekends, with the accident day excluded.
A useful reporting culture depends on the response to a real concern. Thank the person, protect anyone at risk, listen without immediately allocating blame and explain the next steps. A supportive approach can coexist with fair accountability for deliberate, reckless or repeated conduct. Blanket promises that nobody will ever face consequences are neither credible nor a substitute for a consistent investigation process.
Make the reporting route usable for temporary workers, contractors, night shifts and people with different language or accessibility needs. Offer routes for confidential escalation where necessary. Explain how urgent concerns differ from routine improvement suggestions. Avoid league tables that reward the absence of reports or pressure teams to reclassify harm. Confidential information should go only to people who need it for a legitimate purpose.
Close the feedback loop. Tell the reporter what was examined, what action is being taken and what can be shared without compromising privacy. A rise in reports could reflect improved trust, changing exposure, worse conditions or a change in classification. It is a signal to examine, not proof by itself of a healthy culture. Review report quality, exposure, severity potential, action closure and worker experience together. The objective is to find and fix weaknesses while keeping reporting accurate, accessible and fair.
Workplace case
A manager introduces a prize for the team with the fewest near-miss reports.
Decision and explanation
What is the likely management concern?
It can discourage useful reports and distort the information used to prevent harm.
Reward useful prevention and verified improvement without suppressing the information needed to act.
First protect people, provide emergency assistance and prevent further exposure. Preserve the scene so far as safe and lawful, including requirements from the responsible authorities. Do not disturb failed equipment simply to reproduce the event. Choose an investigation team with suitable knowledge, independence and authority. The depth should reflect actual and potential harm, complexity and learning value.
Gather information from the people doing the work, witnesses, equipment condition, layout, documents and relevant records. Interview promptly in a suitable place, explain the purpose and ask open questions about the sequence and normal work. Separate witnesses’ observations from later discussion or assumptions. Do not promise absolute confidentiality that the organisation cannot lawfully maintain. Protect personal and health information and follow the applicable retention arrangements.
In the pallet case, examine the load and packaging, handling method, forks and attachments, truck condition, visibility, route protection, pedestrian access, competence, supervision, staffing and production demands. Record the timeline and gaps. Photographs, CCTV and electronic logs need lawful collection and accurate context. A signed statement is not automatically correct, and a procedure showing the intended method is not proof that the method was practical or followed. Keep hypotheses open until evidence supports or contradicts them.
Workplace case
The investigation team drafts its conclusion before checking the pallet or interviewing the operator.
Decision and explanation
What should change?
Gather and compare reliable evidence, including the actual task and conditions, before reaching conclusions.
Premature conclusions can hide equipment, planning and organisational contributors.
Immediate causes describe the events or conditions closest to the harmful outcome, such as an unstable load or a person entering its path. Underlying causes concern the arrangements that allowed those conditions, such as unsuitable packing, maintenance or route management. Root causes concern deeper management or organisational weaknesses. These are useful analytical levels, not a requirement to find a single person or one universal root.
The five whys can help a team move beyond a superficial explanation. Ask why the load became unstable, why the packing arrangement was unsuitable and what decisions or constraints shaped it. Each link needs evidence. There may be several branches, including design, information, staffing and changes. Stop asking when the analysis has identified actionable, supported causes, not merely when the fifth question is reached. Do not invent unrealistic targets because a training example mentioned them.
Compare the explanation against the timeline and consider alternatives. Did the load fail because of packaging, a collision, a mechanical defect, an unsuitable attachment or a combination? What would have prevented the event even if another factor remained? Involve workers and specialists to test whether proposed changes fit the real task. Keep uncertainty visible where evidence is missing. An investigation should explain why controls failed and what must change, with fair treatment of everyone involved.
Workplace case
A worksheet concludes “poor management targets” after five questions, although no workload evidence was collected.
Decision and explanation
What is the correct next step?
Treat it as a hypothesis and test it against records, accounts and alternative explanations.
A causal label is useful only when supported by evidence and connected to an effective action.
A fishbone, also called a cause-and-effect or Ishikawa diagram, places the event at its head. The main bones group possible contributors; smaller branches explore what led to each one. Categories are prompts to investigate, not findings.
Fishbone: explore the wider picture
Use it when several things may have contributed. Start with categories such as people, equipment, methods, materials, environment and management; rename them to suit the work. Add causes and subcauses without forcing a single chain.
Ask what led to a specific explanation. Branch when there is another reason, and stop where the evidence runs out. Five is a guide, not a target. Use the two methods together to examine a broad picture and its individual paths.
Define what happened, including the task, place and sequence. Keep the event separate from assumptions about why.
Gather accounts from people involved and add several possible explanations. Explore work conditions, equipment and management arrangements as well as individual actions.
Record supporting and contradictory evidence for each explanation. Keep untested ideas separate from accepted findings; add an open question where evidence is missing.
Review immediate, underlying and root causes from the evidence. A category, the final card or the depth of a branch does not decide the cause level.
Link actions to the supported causes, assign an owner and date, then check implementation and whether the action prevents recurrence.
Compare the worked examples
The two BuildOut reports examine the same invented excavator-arm/scaffold incident: 18 explanations and six actions. Their evidence references are fictional teaching records.
BuildOut fishbone
Six cause categories with subcauses, evidence checks and actions · 24 pages.
Use the established causes to select controls through the hierarchy. If a pedestrian route crosses the load-handling area, redesigning or physically separating the interface may provide stronger protection than a reminder. Improve packaging or loading specifications where needed, maintain suitable equipment and provide competent supervision. Avoid defaulting every finding to retraining without considering whether the work system is reliable and usable.
Prioritise urgent protection and critical controls. Record a responsible owner with the authority and resources to deliver each action, a realistic date, interim protection and a defined verification method. Some actions require engineering design, change assessment or consultation before implementation. A purchase order or revised procedure is progress, not evidence that exposure is controlled. Escalate overdue or ineffective actions through the management system.
After implementation, inspect or test the actual arrangement under representative conditions. Confirm it has not transferred risk elsewhere and that workers understand the changes. Share transferable learning with relevant teams without distributing private evidence or blaming individuals unnecessarily. Review related risk assessments, training, maintenance and emergency arrangements where affected. Measure whether the specific control now performs as intended. The purpose is to reduce recurrence and harm, not to promise that any investigation can guarantee an event will never happen again.
Workplace case
The corrective action is “retrain everyone”, with no owner, date or control-performance check.
Decision and explanation
Which improvement makes the action useful?
Connect it to supported causes, stronger feasible controls, an accountable owner and verified performance.
A completed training record alone may leave the failure mechanism unchanged.
Start with the organisation’s work and the people who could be harmed. Leadership sets expectations, resources and accountability. Consultation helps reveal actual conditions and workable solutions. Risk assessment identifies significant harm pathways and chooses controls. Safe systems translate those decisions into usable work arrangements. Monitoring checks whether the controls function, while reporting and investigation reveal weaknesses and changes.
These are connected activities. A transport incident may require a redesigned route, revised delivery planning, changed contractor information and a different management check. Updating only the risk assessment document can leave the physical problem intact. Equally, installing a barrier without checking emergency access, maintenance and supervision can transfer or conceal risk. Use change management and worker involvement to maintain the whole arrangement.
A useful review asks what could seriously harm someone, what prevents it, how reliable that protection is and who checks it. It also asks what happens when the protection fails. Use the course map to explain the connections in your own workplace. If you cannot describe a control or its verification clearly, identify the information or expertise you need. Confidence in a score or certificate should never substitute for evidence of real safeguards.
Workplace case
A new machine is installed with a revised assessment, but no isolation, maintenance or operator arrangements have changed.
Decision and explanation
What needs attention?
The connected operating, isolation, competence, maintenance and monitoring arrangements.
A management system needs the practical arrangements that make its decisions work.
Choose an issue with a clear harm pathway and a realistic opportunity to improve protection. A missing transport barrier, inaccessible isolation point or repeated exposure-control fault may be more important than a convenient low-consequence task. Where there is immediate danger, stop or protect now through the responsible arrangements rather than scheduling a future improvement while work continues.
Define the scope, people affected, present controls and the evidence gap. Involve those doing the work and obtain specialist support where necessary. State the improvement, who owns it, the resources required, interim protection, due date and how effectiveness will be verified. Agree how findings will be communicated across shifts and contractors. A manager should not assign an engineering solution to someone who lacks authority or competence to design it.
For example: before the next delivery, review the pedestrian crossing with the team and competent site support, establish effective temporary separation and agree the longer-term route change. The verification might include inspection of the installed arrangement and observation of a representative delivery. It should not rely only on asking whether people have read an email. Keep the action proportionate and adjust it when evidence or work conditions change.
Workplace case
A supervisor’s action says “improve safety culture by Friday”.
Decision and explanation
Which revision is more useful?
Name the specific control problem, owner, protection, delivery date and evidence of effective change.
Specific, verifiable actions make management intent reviewable.
Use feedback to improve understanding before the formal exam and project.
Review the decisions that required retries and explain why the stronger answer works. Practise the distinction between hazard and risk, planned and verified residual risk, emergency stop and isolation, generic and task-specific assessment, and leading activity measures and control effectiveness. Use the complete reader, sources and examples to close gaps while you are still in the learning phase.
The formal theory assessment is a randomly assigned Paper A, B or C, with 50 single-best-answer questions, 60 minutes and a pass threshold of 38 out of 50. It is closed book under the programme’s rules. The platform retains the assigned paper across resume; learners do not choose the version. The native LMS records timing, attempts and marking. Remote self-paced delivery does not claim to prevent every form of misconduct or verify identity through a browser alone. Follow any additional identity and supervision arrangements communicated by the provider.
After a theory pass, complete the separate risk assessment project using the issued brief and submission area. It is assessed by a person. The project is not automatically marked by this learning player or by a risk calculator. A course completion certificate requires core learning, the assigned theory pass, a satisfactory project and the assessor’s explicit safety verification. Industry learning adds context but does not replace any baseline assessment requirement.
Workplace case
A learner has finished all reading but has not passed theory or submitted the project.
Decision and explanation
What can the account correctly show?
Core learning progress, with theory and project requirements still outstanding.
Progress, grades and certificate eligibility are separate records.
Define the exact activity and boundaries before selecting hazards: replacing which fitting, at what height, using which method, while which other work continues? Establish the people affected, competence, services, layout, equipment limits and emergency arrangements. Obtain permission for any real observation and keep out of hazardous areas. A training project must not create the exposure it is meant to assess.
Select three significant hazards with distinct harm pathways. For each, identify who may be harmed, how harm could occur and the controls that actually exist. Justify likelihood and severity using the programme descriptors. Choose additional controls through ERIC-PD, considering avoidance and engineering before reliance on behaviour or PPE. Name accountable owners, timescales and interim protection. Target residual scores are conditional until the controls are implemented and verified.
For the warehouse task, transport separation, suitable access and verified energy isolation are separate issues. A competent plan might avoid overhead work during dispatch, choose suitable access equipment and establish isolation by the appropriate competent person. Do not invent permissions, inspection results or equipment capabilities. State what needs confirmation and hold the relevant work until essential safeguards are established. The assessment must be suitable and sufficient for the activity, discussed with those involved and amended to match actual work.
Workplace case
A row says “working at height; everyone; use PPE; residual risk 1”.
Decision and explanation
What is missing?
A specific harm pathway, actual conditions, justified factors, suitable stronger controls and verification.
The logical chain matters more than a completed-looking row.
Use the 30-mark rubric without treating a score as permission to work.
The project contains three significant hazard rows. Each row has ten marks: two for the justified initial rating, five for suitable ERIC-PD controls, two for the justified conditional residual rating and one for identifying a specific critical control. The total is 30 and the pass threshold is 20. At least two rows must identify acceptable critical controls. The assessor must also confirm that no unresolved omission of an essential safeguard makes the submission unsafe or fundamentally incomplete.
Opening details, task boundaries, who may be harmed and how, existing controls, accountable owners, dates, implementation evidence and review arrangements are required validity information. Omitting them may require resubmission even where arithmetic is correct. Do not claim a control is installed if it is only proposed. Explain the basis for any reduction in likelihood or severity. A physical control may sometimes change credible severity, but most administrative measures do not remove the underlying potential consequence.
The assessor records the mark, feedback and separate safety verification. An automatic numerical pass cannot compensate for a missing isolation, rescue arrangement or other essential control in the selected scenario. If changes are required, respond to the feedback, amend the whole affected chain and resubmit through the native assignment. Submission and assessor verification are training decisions. They do not authorise the real task or replace your employer’s competent approval, inspection and release arrangements.
Workplace case
A project receives 22/30 but leaves a fatal energy-isolation omission and identifies only one acceptable critical control.
Decision and explanation
Can the final certificate be issued?
No. The critical-control minimum and explicit safety verification must also be satisfied.
The numerical threshold cannot override the programme’s safety requirements.
Complete the recorded journey and return to your learning account.
Use the issued project template and brief in the recorded LMS. Select an agreed real task where safe access and information are available, or the provider-issued fictional scenario if that route is authorised. Do not submit confidential personal, medical, security or commercially sensitive information without appropriate permission. Redact unnecessary identifiers. Keep your own work, references and declarations accurate.
Save the final file in an accepted format, close and reopen it, and check that every page, row and symbol remains readable. Upload it to the private assignment after your theory pass, confirm the submission declaration and use the final submit action. Retain the LMS receipt or submission status. A draft upload is different from a submitted project. The native page shows the current attempt, any feedback and whether resubmission is required.
Return through My courses or My certificates in your learning account. The programme certificate becomes available only when all four requirements are met. It is an independent SHARE training completion record, suitable to retain with your learning evidence, and does not claim IOSH or NEBOSH endorsement, regulated qualification status or authority to carry out specialist work. The formal theory time and your project are additional to the 18 teaching blocks. Ask the provider for an agreed adjustment or support route before an assessment when required, without putting private health details into a public practice form.
Workplace case
The file appears in the assignment draft area, but its status says not submitted.
Decision and explanation
What should the learner do?
Review the upload, complete the declaration and final submission, then verify the recorded receipt/status.
Use the actual LMS submission state and retain evidence of receipt.