SHARE Knowledge Hub

Hazard group - psychological hazards

Psychological hazards in this SHARE group refer to psychosocial risks arising from work design, working relationships and organisational conditions. Excessive or conflicting demands, limited control, inadequate support, bullying, violence, unclear roles and poorly managed change can contribute to work-related stress and mental ill health. Fatigue, lone working and exposure to distressing events may interact with these risks. Assessment examines how work is organised and experienced across roles and shifts, using worker consultation and proportionate organisational evidence. Employers should improve workload, staffing, role clarity, support and protection from aggression, then check whether those changes work in practice. Wellbeing activities and individual coping advice support, but do not replace, action on harmful working conditions. The group supports preventive management and appropriate support without diagnosing individuals or exposing confidential health information.

Updated 2026-10-19UK workplace guidance

Understanding Hazard group - psychological hazards

Psychological hazards in this SHARE group refer to psychosocial risks arising from work design, working relationships and organisational conditions. Excessive or conflicting demands, limited control, inadequate support, bullying, violence, unclear roles and poorly managed change can contribute to work-related stress and mental ill health. Fatigue, lone working and exposure to distressing events may interact with these risks. Assessment examines how work is organised and experienced across roles and shifts, using worker consultation and proportionate organisational evidence. Employers should improve workload, staffing, role clarity, support and protection from aggression, then check whether those changes work in practice. Wellbeing activities and individual coping advice support, but do not replace, action on harmful working conditions. The group supports preventive management and appropriate support without diagnosing individuals or exposing confidential health information.

Why this matters at work

Monitor whether actions have been implemented, then evaluate whether they address the problem. These are different questions. A changed roster exists on paper before it has been tested under actual call-outs; a reporting form can be available while staff still believe nothing will happen. Choose evidence related to the control purpose and agree the review timing with those affected. Some operational changes can be checked quickly, while longer-term organisational effects require an appropriate period and context. Do not postpone action when failure becomes obvious. Review changes in tasks, staffing, service demand, incidents, reported symptoms or access to support. Use worker feedback with appropriate organisational indicators, remembering that a rise in reports may reflect improved access and trust. A trend alone cannot show clinical cause or prove that the intervention was responsible. Preserve enough evidence to understand what changed and why.

A role description helps only if the actual instructions and responsibilities are compatible. Compare what different managers expect, what decisions the worker controls and which demands take priority when they conflict. Role uncertainty can arise after organisational change, across contractor interfaces or when someone covers absent colleagues. Workers may carry responsibility for an outcome without the authority or resources to deliver it. Give clear operational information and a route to resolve uncertainty before harmful pressure or unsafe improvisation develops. Consultation should include the teams that issue work and the people who receive its output. A revised role sheet must be supported by changed instructions and consistent supervision. Document what is known, what remains unresolved and who will decide it. Treat a worker raising incompatible requirements as useful evidence about the system rather than an automatic failure to cooperate.

How organisations manage this in practice

Start with the work a person is expected to complete and the conditions in which it happens. Excessive demands, little influence over the task, inaccessible support, harmful relationships, conflicting roles and poorly managed change can combine. A busy period is not automatically evidence of illness; a repeated mismatch between expectations and available resources deserves investigation. Include mental and physical consequences and the possibility that work aggravates an existing condition. The six Management Standards organise questions about work design. They do not establish a clinical diagnosis, a safe workload number or an official taxonomy of every psychological hazard. Fatigue and violence require their own task pathways as well as consideration within work design. Map the demand, people affected, available control and likely failure before choosing an intervention. A wellbeing campaign may be useful, but its attendance figures do not show whether a preventable cause has changed. Keep individual support accessible while managers address conditions they can influence.

For a customer facing team with shift work, review workload, control, support, role clarity, change and relationships. Discuss aggression, reporting barriers, lone work and fatigue without exposing confidential personal information. Adjust demands, staffing, communication and work patterns. Create credible routes to report bullying, harassment and violence; respond and follow up. Check access to support and whether implemented changes reduce exposure. Stress risk assessment; anonymised consultation findings; action plan and owners; shift review; violence reporting and prevention arrangements; follow up measures and confidential support routes. Follow the assessment through procurement, implementation, briefing, supervision and verification rather than stopping at a document.

What are psychological hazards and what does their assessment cover?

This group covers psychosocial risks associated with work design, relationships, violence and organisational conditions. Assess the causes in work rather than relying only on individual coping measures. Low morale is an indicator, not a diagnosis. Bullying and unlawful harassment are not identical legal concepts. Keep personal health and complaint records restricted and follow appropriate employment and clinical advice. See Working together to reduce stress at work and Managing shift work: Health and safety guidance.

Start with the hazard group overview, then use the related topic links for task-specific background. A group checklist helps discovery; it does not establish that the controls at your site are effective. Read the hazard group overview.

Which hazards should the assessment consider?

Check each relevant mechanism during normal work, cleaning, maintenance, foreseeable failure and emergencies. Several entries can share a harm pathway; follow the linked explanation rather than treating each label as a separate assessment. See Working together to reduce stress at work and Managing shift work: Health and safety guidance.

Hazard or exposure and practical application — part 1 of 3

Hazard or exposure and practical application — part 1 of 3. Compare the named situations, controls and evidence together. Original SHARE explanation; apply the linked source in its stated jurisdiction.
Learning point: Compare the named situations, controls and evidence together. Original SHARE explanation; apply the linked source in its stated jurisdiction.
Read the complete visual as text
  1. Stress: Read the mechanism and controls: Stress workload and control
  2. Excessive workload: Read the mechanism and controls: Stress workload and control
  3. Fatigue: Read the mechanism and controls: Fatigue shifts and long hours
  4. Mental fatigue: Read the mechanism and controls: Fatigue shifts and long hours

Hazard or exposure and practical application — part 2 of 3

Hazard or exposure and practical application — part 2 of 3. Compare the named situations, controls and evidence together. Original SHARE explanation; apply the linked source in its stated jurisdiction.
Learning point: Compare the named situations, controls and evidence together. Original SHARE explanation; apply the linked source in its stated jurisdiction.
Read the complete visual as text
  1. Shift work and long working hours: Read the mechanism and controls: Fatigue shifts and long hours
  2. Workplace violence: Read the mechanism and controls: Violence and aggression
  3. Harassment: Read the mechanism and controls: Bullying harassment and relationships
  4. Bullying: Read the mechanism and controls: Bullying harassment and relationships

Hazard or exposure and practical application — part 3 of 3

Hazard or exposure and practical application — part 3 of 3. Compare the named situations, controls and evidence together. Original SHARE explanation; apply the linked source in its stated jurisdiction.
Learning point: Compare the named situations, controls and evidence together. Original SHARE explanation; apply the linked source in its stated jurisdiction.
Read the complete visual as text
  1. Job insecurity: Read the mechanism and controls: Communication role and change
  2. Poor communication: Read the mechanism and controls: Communication role and change
  3. Lack of support: Read the mechanism and controls: Support morale and distress
  4. Low morale: Read the mechanism and controls: Support morale and distress

Describe when the source is created or released and how it reaches someone. Compare normal operation with receipt, setup, blockage, breakdown, disposal and contractor access. The list below is a discovery aid: an omitted mechanism may still be important, while an irrelevant item does not require a fabricated assessment. Follow the mechanism explanation and test controls against the actual circumstances before scoring risk.

Which work conditions create psychological or psychosocial risk?

Assess psychosocial hazards in work organisation, relationships and conditions. Review demands, control, support, relationships, role and change using the Health and Safety Executive (HSE) Management Standards approach. Stress is not a clinical diagnosis obtained from a workload score. Workers have different circumstances; investigate work factors rather than assuming poor resilience. Individual and clinical support may be necessary alongside organisational prevention. See Stress and mental health at work and Working together to reduce stress at work.

Examine demands, control, support, relationships, role and change as features of work. Compare actual demand with resources and decision authority across roles and shifts. Violence and fatigue may also require specific assessment. Indicators such as absence, turnover or complaints guide inquiry but do not diagnose people or prove a single cause. Consult workers and address the organisation rather than assigning a resilience task to the person reporting a problem.

How should staff be consulted without exposing private health information?

Consult workers through credible routes and turn findings into resourced actions and feedback. Aggregate sensitive results carefully; small groups may identify people. Sickness and turnover can signal issues but do not prove cause. Separate risk assessment from restricted complaints, safeguarding and medical processes. Evaluate whether work conditions improve, not merely whether wellbeing activities were delivered. General guidance cannot diagnose an individual or replace urgent professional support. See Stress and mental health at work and Workplace bullying and harassment.

Provide reporting routes that do not force a worker to approach the person implicated in a concern. Use group-level information and observed conditions to identify organisational changes; keep individual health and case information in the appropriate confidential system. Explain what will change, who owns the action and when effectiveness will be reviewed. A survey without follow-up is not a control, and fear of retaliation can conceal a serious problem.

How can workload and lack of control cause work-related stress?

Demand can exceed capacity when staffing, complexity, interruptions and deadlines interact. Lack of control prevents management of conflicting demands. See Stress and mental health at work and Working together to reduce stress at work.

A contact centre raises targets while reducing staffing, a teacher receives competing demands or care staff cannot obtain cover for breaks. Sustained mismatch between demand, control and support can affect health and performance. Absence or turnover can signal a problem but cannot diagnose an individual or prove the cause alone.

Which source controls and checks change the outcome?

Remove unnecessary demands and redesign staffing, priorities and decision authority with staff participation. Managers verify that the change reduces actual workload and does not transfer it to another shift. Clear escalation, supervision and support sustain the improvement; wellbeing sessions are a supplementary measure. Escalate unsafe demand or acute concerns promptly through suitable professional and organisational routes. Keep personal health information confidential and review the system rather than blaming an employee.

How should the controls be applied?

Review resources, priorities and escalation and involve workers in redesign and appropriate discretion.

When should work stop or be escalated?

Hold the affected activity if a critical safeguard is missing, fails its check or no longer matches the assessed conditions. Assess peaks and actual work. Assistance programmes do not remove excessive demand.

How can shift design and long hours create fatigue-related errors?

Alertness and judgement depend on schedule, recovery, commuting and task demand, not only one shift duration. See HSE Fatigue and Managing shift work: Health and safety guidance.

A driver works after an extended shift, a plant operator loses vigilance overnight or a care worker repeatedly covers short-notice gaps. Sleep loss, timing, workload and recovery interact, increasing the chance of errors or delayed response. A person's willingness to work does not establish fitness for a safety-critical task.

Which source controls and checks change the outcome?

Remove unnecessary extended work and redesign staffing, shift timing and workload using competent assessment and consultation. Check actual hours, overtime and recovery rather than the published rota alone. Supervisors need a route to adjust work when fatigue or a cover gap is reported without punishing disclosure. Hold affected safety-critical tasks where capability is in doubt and arrange a safe alternative. Caffeine, Personal protective equipment (PPE) or an alertness poster cannot make a poorly designed shift system safe.

How should the controls be applied?

Assess rosters and safety-critical tasks, recovery and breaks; make fatigue reporting credible and review staffing.

When should work stop or be escalated?

Hold the affected activity if a critical safeguard is missing, fails its check or no longer matches the assessed conditions. Use current HSE fatigue guidance. Older shift guidance is context, not a universal safe roster.

How can a public-facing interaction escalate into violence?

Threats, abuse and assaults may arise during care, enforcement, public contact, cash handling or lone work. Online abuse can affect work too. See Violence and aggression at work and Violence at work.

A retail worker handles a dispute, a home visitor works alone or a reception team encounters an escalating threat. Abuse, intimidation or assault can cause physical injury and psychological harm. The risk depends on the situation, access, communication and available support, not on labelling a customer or patient as a hazard.

Which source controls and checks change the outcome?

Avoid unnecessary confrontational or lone interactions and redesign access, staffing and service arrangements. Suitable separation, alarms and communication support the assessed response; supervisors verify staff can withdraw and obtain help. Training in recognition and de-escalation supplements the system and is not an instruction to physically intervene. Stop or withdraw from an unsafe interaction and use emergency arrangements for immediate threats. Review incidents with confidential support and design changes, not a demand for staff to tolerate abuse.

How should the controls be applied?

Assess service design, access, staffing, reporting, training and support.

When should work stop or be escalated?

Hold the affected activity if a critical safeguard is missing, fails its check or no longer matches the assessed conditions. Review incidents without normalising abuse. Scripts alone are not adequate protection.

How can bullying or harassment affect health and safe working?

Intimidation and unacceptable conduct can harm workers and undermine reporting. Bullying and unlawful harassment are distinct legal concepts. See Workplace bullying and harassment and Stress and mental health at work.

Repeated intimidation, discriminatory harassment or undermining behaviour can deter staff from raising hazards or seeking help. A junior worker may remain silent if the person controlling work is also the alleged source of harm. A grievance route alone does not prevent the organisational conditions that allow behaviour to continue.

Which source controls and checks change the outcome?

Prevent harmful conduct through fair work design, accountable leadership and accessible reporting outside the immediate line where needed. Managers handle allegations promptly and impartially through applicable arrangements, protect confidentiality and avoid retaliation. Support the individual while examining workload, relationships and decision practices. Escalate threats or immediate danger without waiting for an annual survey; do not publish personal histories in a shared risk register or treat an untested allegation as an established finding.

How should the controls be applied?

Set expectations and credible confidential reporting and respond through fair appropriate procedures.

When should work stop or be escalated?

Hold the affected activity if a critical safeguard is missing, fails its check or no longer matches the assessed conditions. Keep complaint details restricted and seek appropriate employment advice; a risk narrative cannot establish a legal finding.

How can conflicting roles or poorly managed change increase risk?

Conflicting responsibilities and uncertain change can add avoidable demand and anxiety. See Stress and mental health at work.

A restructure leaves two supervisors issuing conflicting priorities, a contractor receives a different instruction from operations, or an employee is uncertain about a changed role. Ambiguity and lack of control can create stress and an unsafe operational choice. An email announcing change is not evidence that staff understand or can deliver it.

Which source controls and checks change the outcome?

Remove conflicting demands, clarify decision authority and involve affected staff before implementing a change. Managers check workload, competence and interfaces through realistic scenarios and an accessible escalation route. Supervisors verify handovers and respond to workarounds. Hold a critical activity if no one can resolve incompatible instructions or a new responsibility exceeds competence; record the organisational correction rather than describing the person as the problem.

How should the controls be applied?

Clarify responsibilities and priorities, communicate knowns and unknowns and consult during change.

When should work stop or be escalated?

Hold the affected activity if a critical safeguard is missing, fails its check or no longer matches the assessed conditions. Check understanding across shifts and contractors. One email does not establish clarity.

What should managers do when staff report distress or inadequate support?

Inaccessible assistance can leave people unable to manage demands. Low morale is an indicator, not a diagnosis. Distressing work may require appropriate professional support. See Stress and mental health at work and Violence and aggression at work.

Staff can experience distress after an assault, repeated high demand or a poorly supported change. Reduced morale is a useful prompt for inquiry but is not a diagnosis, and individual experiences differ. A manager may need to address the work conditions and arrange confidential professional support at the same time.

Which source controls and checks change the outcome?

Address the preventable demand, exposure or relationship problem first, then agree practical support and follow-up with the person through suitable arrangements. Managers provide a safe reporting route and check whether agreed changes actually occur. Do not require detailed personal histories to obtain help or put medical information in a general action log. Urgent safety or wellbeing concerns need the appropriate immediate professional or emergency route, not a generic resilience exercise.

How should the controls be applied?

Provide practical supervision, resources, preparation and post-incident support and address underlying conditions.

When should work stop or be escalated?

Hold the affected activity if a critical safeguard is missing, fails its check or no longer matches the assessed conditions. Review support during real difficulties. Personal histories belong in restricted processes, not shared risk examples or dashboards.

How should this hazard group be assessed and managed in practice?

For a customer facing team with shift work, review workload, control, support, role clarity, change and relationships. Discuss aggression, reporting barriers, lone work and fatigue without exposing confidential personal information. Adjust demands, staffing, communication and work patterns. Create credible routes to report bullying, harassment and violence; respond and follow up. Check access to support and whether implemented changes reduce exposure. Stress risk assessment; anonymised consultation findings; action plan and owners; shift review; violence reporting and prevention arrangements; follow up measures and confidential support routes. Follow the assessment through procurement, implementation, briefing, supervision and verification rather than stopping at a document. See Working together to reduce stress at work and Managing shift work: Health and safety guidance.

Agree the activity, affected people and prerequisites with operations, workers and any contractor before work. Test whether the task can be removed or redesigned, then verify selected controls in the place they will operate. During work, the supervisor compares conditions with the assessed method and has authority to stop. Completion includes safe waste or equipment handling, outstanding defects and a named hand-back decision; a completed risk form is not the end of the control process.

What must be established before assigning a risk score?

Identify the actual activity, foreseeable harm, people exposed and controls already demonstrated to work. Consider start up, normal operation, cleaning, maintenance, breakdown, emergency response and simultaneous work. A numerical matrix may support prioritisation but cannot establish compliance or replace a specialist assessment. Do not assign a residual risk score merely because a proposed control has been written into a form. Keep unknowns explicit and obtain site evidence before deciding that work can proceed. See Managing risks and risk assessment at work and Managing for health and safety (HSG65).

Write a short causal description: the work creates or releases something, a person is exposed by a particular route, and a specified injury or ill-health outcome is foreseeable. Establish whether existing measures work in the actual task before estimating likelihood. An unknown material, unverified safe state or absent critical control is a decision gap, not a reason to select a reassuring number. The responsible manager records what must be resolved and who can authorise the next step.

Who owns each control and how should it be verified?

The dutyholder provides resources and arrangements. The operational manager assigns each control to someone able to implement it. Supervisors verify the controls at the point of work and respond to defects. Workers and representatives explain work as done and report problems. Specialist advisers address limits of local competence. Record the control, responsible role, evidence, check method, due date and escalation route. Completion of a training course or signature alone does not demonstrate effective risk control. See Managing for health and safety (HSG65).

Separate the person who funds and owns the control from the person who performs its check. For an engineered measure, record the accepted performance or condition, who verifies it, what a failed result means and how maintenance is coordinated. For a staffing or organisational measure, check actual cover, authority and staff experience. A signature confirms a recorded action, not effectiveness. The supervisor must be able to hold work and obtain a competent remedy when the required condition is not met.

Who might be affected, including people outside the work team?

Include employees, agency workers, apprentices, contractors, cleaners, maintainers, delivery drivers, service users, visitors and nearby public. Consider inexperience, pregnancy, disability, health conditions, language needs and lone work individually and without stereotyping. Consultation should identify barriers to controls rather than collect unnecessary medical details. Share relevant interface information between employers. A single activity may require several hazard groups; avoid splitting the assessment so that interacting controls have no clear owner. See Managing risks and risk assessment at work and Managing for health and safety (HSG65).

Walk through the job from the perspective of someone who has not received the operator briefing: a cleaner, visiting driver, contractor, new starter or occupant of an adjoining area. Ask whether a control protects them during arrival, normal work, waste removal and emergencies. Agree who controls each shared boundary and how changes are communicated. Individual needs influence a suitable arrangement but do not justify treating an employee, disability or health condition as the hazard.

When should the assessment be reviewed and what evidence matters?

Reassess when equipment, materials, staffing, layout, working hours or environmental conditions change; after incidents, near misses, complaints, symptoms or evidence of failed controls; and through planned risk based review. Verify improvements under realistic demand, not only during an announced inspection. Retain dated observations, measurements where relevant, maintenance records and action closure evidence. No single review interval suits every risk. Health surveillance, exposure monitoring and clinical diagnosis are different activities and require their own competent arrangements. See Managing risks and risk assessment at work and Managing for health and safety (HSG65).

Use a change or failure to test the original assumptions, not merely change the date on the form. A different product, higher throughput, altered route, new shift or contractor may change the harm pathway. Keep observations, applicable measurements, defects and authorisation evidence linked to the task. After correction, verify under representative demand and with affected workers. Repeated workarounds or symptoms require investigation of the design and organisation, even when no injury has been recorded.

How could psychological hazards arise in construction and civil engineering?

In construction and civil engineering, construction supervisors face programme conflicts. Clarify priorities resources and escalation. Consultation and actions. This is an illustrative application, not a documented case or a complete method statement. See Stress and mental health at work.

Conflicting programmes and responsibility without resources can create sustained stress and pressure to bypass safe sequencing.

The project manager agrees realistic priorities and authority with supervisors. Unresolved simultaneous demands or unsafe resource gaps need a programme decision, with actions and feedback recorded rather than another resilience briefing.

How could psychological hazards arise in manufacturing and engineering?

In manufacturing and engineering, manufacturing combines overtime and monitoring. Review schedules demand and recovery. Roster and fatigue reports. This is an illustrative application, not a documented case or a complete method statement. See HSE Fatigue.

Overtime, restrictive targets and surveillance can reduce recovery and contribute to fatigue and work-related stress.

The production manager reviews actual hours, demands and staff control across shifts. If cover or recovery is not delivered, change the allocation and investigate; a roster showing a break does not prove it occurred.

How could psychological hazards arise in warehousing and logistics?

In warehousing and logistics, logistics planners face delivery peaks. Set workable demand escalation. Peak review. This is an illustrative application, not a documented case or a complete method statement. See Stress and mental health at work and HSE Fatigue.

Delivery peaks can drive prolonged hours, rushed decisions and insufficient recovery for planners and drivers.

The logistics lead sets achievable capacity and an escalation route for peaks. Repeated excess demand or staff reporting unsafe fatigue requires reprioritising work and resources, not penalising the reporter.

How could psychological hazards arise in agriculture and forestry?

In agriculture and forestry, agriculture involves isolated work. Plan communication and assistance. Contact and support checks. This is an illustrative application, not a documented case or a complete method statement. See Stress and mental health at work.

Isolation and unreliable contact can leave workers without timely support during difficult or threatening work.

The manager consults staff about reliable contact, workload and help access for the location. A failed agreed contact arrangement changes whether the isolated task proceeds; urgent threats use the appropriate emergency route.

How could psychological hazards arise in healthcare and social care?

In healthcare and social care, care workers face aggression. Improve service prevention and support. Incident and staffing review. This is an illustrative application, not a documented case or a complete method statement. See Violence and aggression at work.

Aggression can cause physical injury, fear and longer-term distress, particularly where staffing or response is inadequate.

The service manager assesses prevention, staffing, physical layout and support with workers. An imminent threat needs safe withdrawal and the agreed response; record corrective action without putting private clinical details in a general dashboard.

How could psychological hazards arise in hospitality and food production?

In hospitality and food production, hospitality suffers peak-time abuse. Review staffing and reporting. Implemented prevention actions. This is an illustrative application, not a documented case or a complete method statement. See Violence and aggression at work.

Customer abuse during understaffed peaks can become routine and cause fear or stress.

The duty manager provides workable staffing, escalation and refusal or safe withdrawal arrangements. Repeated incidents or failed assistance require a service and resource review, not normalising abuse as part of the job.

How could psychological hazards arise in retail and public services?

In retail and public services, retail workers handle cash alone. Assess aggression and lone-work interfaces. Response arrangements. This is an illustrative application, not a documented case or a complete method statement. See Violence and aggression at work.

Cash handling alone can combine aggression, restricted escape and lack of assistance.

The store manager examines timing, access and cash-handling design before relying on reporting instructions. Loss of agreed support or a credible threat changes the task immediately; preserve incident information through a confidential controlled process.

How could psychological hazards arise in offices and professional services?

In offices and professional services, professional teams face incompatible deadlines. Review capacity and control. Allocation and consultation. This is an illustrative application, not a documented case or a complete method statement. See Stress and mental health at work.

Incompatible deadlines with little control over allocation can create sustained stress and poor recovery.

The team leader consults staff and compares actual capacity with commitments. Unresolved priority conflicts require an explicit management decision and follow-up; counting completed wellbeing activities does not show demand was reduced.

How could psychological hazards arise in education and laboratories?

In education and laboratories, education reports role conflict and bullying. Provide credible reporting and clarity. Restricted handling and actions. This is an illustrative application, not a documented case or a complete method statement. See Workplace bullying and harassment and Stress and mental health at work.

Role ambiguity, bullying and unsafe reporting relationships can cause distress and deter early problem reporting.

The institution separates work-design assessment from confidential complaint and safeguarding processes. Reports of retaliation or unresolved unsafe roles are escalated through an independent appropriate route; aggregate data must not identify individuals.

How could psychological hazards arise in utilities and waste management?

In utilities and waste management, utilities handle calls after outages. Plan surge resources and abuse response. Peak and incident review. This is an illustrative application, not a documented case or a complete method statement. See Stress and mental health at work and Violence and aggression at work.

An outage can generate a sudden workload surge and abusive calls when staff have little control over the underlying fault.

The service manager resources surge cover, clear public information and an effective threat response. Failed cover or rising abuse needs an operational change; workers should not carry the service failure through excessive hours.

How could psychological hazards arise in energy and process industries?

In energy and process industries, process teams monitor systems at night. Review fatigue and handover capacity. Rosters and handovers. This is an illustrative application, not a documented case or a complete method statement. See HSE Fatigue.

Night work and poorly designed alarm demand can reduce alertness and contribute to fatigue-related errors.

The operational owner reviews actual hours, task demand, recovery and handover competence. Unsafe alertness or missing cover needs reassignment through the safe operating arrangements; a personal coping instruction is not a system control.

How could psychological hazards arise in events and transport operations?

In events and transport operations, events involve irregular extended schedules. Coordinate recovery and task allocation. Actual hours and fatigue reports. This is an illustrative application, not a documented case or a complete method statement. See HSE Fatigue.

Irregular long shifts and repeated late changes can restrict recovery and place safety-critical tasks with fatigued crews.

The organiser reviews real hours across contractors, travel and turnaround, then reschedules or resources work. Do not release a safety-critical activity where required competent cover and recovery cannot be achieved; record the allocation decision.

How do you put the controls into practice?

Apply the model to work design

For workload, bullying and stress, prevention through work design, achievable demands, support and fair reporting is central. PPE does not control those hazards. Focus-time, contact and shift rules are organisational controls; engineering applies only to actual physical systems, such as assessed access barriers or assistance systems for violence risk.

Move from recognising harm to deciding, implementing, checking and improving the controls. Give each critical control an owner, a check method and a clear escalation route. See Managing risks and risk assessment at work and Managing for health and safety (HSG65).

From work activity to verified control
  1. Understand the taskObserve people, equipment, materials and interfaces.
  2. Describe the harmIdentify exposure, energy release and foreseeable failure.
  3. Control at sourceAvoid, redesign, substitute, contain or separate the hazard.
  4. Check in real workVerify performance, defects, ownership and change triggers.
StageActionWho actsEvidence to retain
Before workConfirm the actual task, people, equipment, substances, location and abnormal conditions.Operational manager with competent adviceAssessment, observations, consultation and required specialist checks
Control deliveryAdjust demands, staffing, communication and work patterns. Create credible routes to report bullying, harassment and violence; respond and follow up. Check access to support and whether implemented changes reduce exposure.Responsible manager and authorised implementersStress risk assessment; anonymised consultation findings; action plan and owners; shift review; violence reporting and prevention arrangements; follow up measures and confidential support routes.
During workSupervise the real activity; check that critical controls remain effective and workers can report problems.Supervisor and workersChecks, defects, changes and escalations
Stop and restartStop the affected activity when serious danger or a failed critical control is suspected. Restart only through the competent site authorisation arrangements.Supervisor and authorised competent personReason for stopping, corrective action, verification and restart authority
ReviewRevisit controls after change, incidents, near misses, symptoms or repeated defects. Check effectiveness rather than counting completed forms.Manager, Occupational safety and health (OSH) adviser and worker representativesDated review, closure evidence and lessons for design and procurement

How does ERICPD apply to psychological hazards?

ERICPD stands for Eliminate, Reduce, Isolate, Control, PPE and Discipline. For psychological hazards, start by removing the hazardous task or source where practicable, then reduce and separate the remaining exposure. Combine suitable safeguards and work arrangements, use relevant personal protective equipment for residual risks, and keep all selected measures effective in everyday work. See HSE: Managing risk using PPE and Managing for health and safety (HSG65).

ERICPD: six decisions for selecting and sustaining controls
  1. 1 · E Eliminate

    Remove the hazardous task or source where practicable; confirm that the alternative still fulfils the task and assess remaining hazards.

  2. 2 · R Reduce

    Use a suitable less hazardous material, process or equipment, or reduce the hazard at source. Check any new risks introduced.

  3. 3 · I Isolate

    Separate people from the hazard through suitable containment, guarding, barriers or other task-specific separation.

  4. 4 · C Control

    Put remaining safeguards and workable task arrangements in place. Engineering controls and administrative arrangements have different strengths.

  5. 5 · P PPE

    Select personal protective equipment for relevant residual exposure. Check suitability, fit, compatibility, use and maintenance.

  6. 6 · D Discipline

    Sustain the controls through management support, supervision, maintenance and learning. Resolve workarounds and failures without blaming workers.

Eliminate, Reduce and Isolate focus attention on the hazard and the exposure pathway before reliance on behaviour or PPE. Controls usually work together: an enclosure may still need safe access, maintenance and instruction. Record the reasons for choosing or rejecting stronger options and check the complete task, including cleaning, maintenance and foreseeable changes.

ERICPD is a practical learning mnemonic. The five-level hierarchy is elimination, substitution, engineering controls, administrative controls and PPE. Reduce may include substitution or source reduction; Isolate commonly involves engineering. Control can include engineering and administrative measures. Discipline supports every selected level and is not an additional protective barrier. These frameworks are related; their labels do not form identical statutory ladders.

What does each role need to know and demonstrate?

People need learning and demonstrated competence for the decisions they actually make, not the same course at every organisational level. See Working together to reduce stress at work and Managing shift work: Health and safety guidance.

For psychological hazards, frontline learning must enable staff to report unsafe demand, fatigue or threats through a safe route. Supervisors need to respond to workload concerns and support confidential reporting. Design, procurement and specialist assessment require deeper competence in staffing, job design, fair change and effectiveness review. Awareness, supervised practice, assessment and authorisation are different stages; an attendance record alone does not establish competence or permit specialist intervention.

Assess practical understanding with the actual task and credible abnormal conditions. The assessor must be competent for the scope being tested; authorisation should state its boundaries. Reassess after a material change, a defect, a demonstrated gap or work outside that scope rather than assuming one fixed refresher interval suits every role.

RoleLearning and decisionsAssessment, evidence and reassessment
Nearby staff and new startersRecognise the relevant exposure, usable routes, warning signs and reporting or emergency arrangements.Supervisor checks a practical explanation and scenario response; retain briefing scope and gaps. Repeat when routes or conditions change.
Frontline usersDemonstrate how to report unsafe demand, fatigue or threats through a safe route, including the checks, limits and stop decision.Competent task assessor observes representative practice and a defect scenario; record task, equipment/material scope and authorisation. Reassess for changed methods or performance gaps.
Specialist support and case handlersUnderstand work design, fatigue, violence prevention and confidential handling within the defined professional remit; recognise when clinical, safeguarding or independent investigation support is needed.Appropriately competent reviewer tests a realistic case, confidentiality and escalation boundaries; retain role scope and assessment without exposing private histories. Reassess following changed demand, remit or demonstrated gaps.
Supervisors and coordinatorsDemonstrate how to respond to workload concerns and support confidential reporting, manage a changed condition and hold or release work.Manager or competent reviewer tests a realistic planning and stop/restart scenario; retain observed decisions and corrective actions. Review following interface failures.
Managers, purchasers and designersMake and resource decisions on staffing, job design, fair change and effectiveness review, including the stronger-control options and residual risks.Competent review of specifications, trials, procurement acceptance and effectiveness evidence; record decision owner and outstanding actions. Reassess after process or organisational change.
OSH advisers, technical specialists and auditorsDistinguish jurisdiction and source limits, test representative evidence and recognise the boundary of their competence.Appropriately competent review of the actual assessment, sources, sampling and closed actions; retain scope and limitations. Escalate missing technical information rather than inventing a conclusion.

How can the hierarchy of controls reduce harmful psychological demands at work?

A service team faces conflicting targets, repeated overtime and difficult customer interactions. High demands, little control and unreliable support can contribute to work-related stress and fatigue. Assess work organisation with staff participation and protect confidential case information.

Illustrative SHARE example: assess stronger options first, then combine the measures needed for the remaining task. If elimination removes the task entirely, later measures address only remaining or different hazards. Each stage below explains what changes, how harm is reduced and who verifies it.

Applying ERICPD to other hazards in this group

For bullying, unclear roles and poorly managed change, act on organisational causes and provide fair, independent reporting and resolution routes. For violence, assess physical layout, staffing, assistance and safe withdrawal. A wellbeing course or survey is not evidence that the cause has been controlled.

Keep an assessment record of the chosen controls, reasons for the selection, action owner, verification evidence and failure response. A failed critical control requires the affected activity to be held and corrected through the competent site arrangements; PPE or a completed form does not override that decision.

Guidance supporting these teaching examples

How can a community service review violence and fatigue together?

Manage this activity by preventing exposure at source, coordinating the affected people and verifying the planned controls before release. A community team extends appointments into evenings and staff report lone visits, missed recovery and threatening interactions. Physical violence, stress and fatigue can combine: a tired worker may respond later while feeling unable to cancel an unsafe visit. The concern is the work arrangement, not the client's identity or an employee's personal resilience. See Stress and mental health at work and Violence and aggression at work.

Illustrative SHARE workplace example

What must be agreed before work starts?

The service manager consults staff through a confidential route and examines actual demand, hours, visit conditions and support. Consider removing unnecessary late visits or using a safer service method before designing staffing, communication and suitable access. Supervisors verify that workers can withdraw, obtain help and reschedule within clear authority. Test the response arrangement rather than merely distributing an alarm device.

What changes, stops or hand-back decisions matter?

During delivery, lost communication, unsafe demand or an escalating threat triggers the agreed stop or withdrawal and response. After an event, provide appropriate support and examine service design without blaming disclosure. Record de-identified actions, effectiveness and staffing changes separately from private health or case information. PPE is not a solution to fatigue or bullying; training supports an adequately resourced system rather than replacing it.

How should jurisdiction, local rules and management assurance be handled?

Apply the law and regulator guidance for the work location, then use competent task and equipment information to establish the practical arrangements. See Managing risks and risk assessment at work and Managing for health and safety (HSG65).

HSE guidance generally addresses Great Britain; Northern Ireland has its own instruments and Health and Safety Executive for Northern Ireland (HSENI) route. Construction, dangerous substances, equipment and other specialist topics need the applicable instrument, not a Great Britain (GB) duty copied into a Northern Ireland (NI) answer. Fire arrangements also differ across the United Kingdom (UK) nations. Foreign project examples require destination-specific official advice and competent local assessment.

Distinguish a legal duty, regulator guidance, an organisation's rule and an illustrative SHARE method. A management system can link assessment, procurement, competence, maintenance, consultation and corrective action; a certification label or an unverified standard clause does not authorise work. For this group, sample evidence on staffing, job design, fair change and effectiveness review and compare the recorded method with the activity observed on site. Resolve conflicts or missing technical information with the responsible competent person.

How would reviewing rising demand in a contact centre work in practice?

Staff report increasing call queues, conflicting targets and limited support after a staffing change. Workload, control, relationships and change can combine to create work-related stress; extended hours can also contribute to fatigue. The manager first examines job design, demand and resources rather than treating resilience training as the principal control. See Stress and mental health at work and HSE Fatigue.

Illustrative SHARE workplace example

What is required before and during the activity?

Before the review, consult staff and representatives through arrangements that protect confidentiality. Compare actual work and available resources across shifts, and agree practical changes with named owners. During implementation, supervisors check workload, support and whether staff can raise problems without penalty. Escalate unsafe staffing, violence or other urgent threats through the appropriate site arrangements.

What does safe completion and hand-back require?

Review the changes using confidential feedback and relevant work indicators, without diagnosing individuals or drawing conclusions from one absence figure. Keep action and effectiveness records separately from confidential personal information. Care, teaching and transport roles have different demands and support needs.

Acronyms and terms

These terms distinguish the source of harm, the exposure route and the controls needed for the actual work.

Letters or termExpansion or definitionMeaning in this topic
UKUnited KingdomA geographical description, not one identical set of health-and-safety instruments.
GBGreat BritainEngland, Scotland and Wales; HSE guidance is generally framed for this jurisdiction.
NINorthern IrelandA separate health-and-safety legal route overseen by HSENI.
HSEHealth and Safety ExecutiveThe GB regulator and a publisher of official workplace guidance.
HSENIHealth and Safety Executive for Northern IrelandThe NI regulator; check its applicable requirements and advice.
OSHOccupational safety and healthPreventing work-related injury and ill health.
PPEPersonal protective equipmentEquipment worn for remaining exposure; it does not replace stronger source controls.
Control of Substances Hazardous to Health (COSHH)Control of Substances Hazardous to HealthThe GB hazardous-substance assessment and exposure-control route.
ERICPDEliminate, Reduce, Isolate, Control, PPE, DisciplineA learning mnemonic for selecting and sustaining controls; not a statutory ladder.
HazardA source or condition with potential for harmDescribe what creates harm, rather than calling a person the hazard.
ExposureA route or contact connecting source and personConsider dose, duration and circumstances where relevant.
Critical controlA measure essential to the safe arrangementDefine its required condition, check, owner and failure response.
Hand-backControlled return to operation or useConfirm people, equipment, protection and outstanding conditions before release.

Example handy documents

Useful records connect the actual task to control ownership, checks, stop decisions and verified hand-back. See Managing risks and risk assessment at work and Managing for health and safety (HSG65).

The following are examples of documents an organisation could create or adapt, not downloadable files or a complete safe system. Use the task-specific information and competent review before applying them. Keep private health information outside general operational records.

What should a task and harm-route assessment contain?

Record people, source, exposure or energy, foreseeable harm, existing controls, stronger options, residual uncertainty and the responsible decision owner.

What should a critical-control check and defect log contain?

Record the required condition, check method, responsible person, failed result, restricted work and verified corrective action.

What should a change and hand-back record contain?

Capture changed material, equipment, staffing, layout or conditions; prerequisites, hold decisions, competent verification and restart authority.

What should a competence and authorisation record contain?

Name the assessed task and scope, practical evidence, assessor, limits, supervision and reassessment triggers.

What should an operational learning review contain?

Link observations, complaints, near misses or relevant exposure evidence to a design or organisational change and an effectiveness check.

Documents to download

Download editable resources from the SHAREhub environment to support your work. Working forms and spreadsheet input areas are blank. Reports, plans, guides, briefings, procedures and policies contain completed worked example content to adapt.

Return to SHARE home