SHARE Knowledge Hub

Hazard group - ergonomic hazards

Ergonomic hazards arise when work demands, equipment or the working environment do not fit the people carrying out the task. Manual handling, repetitive movements, forceful exertion, sustained or awkward postures, poorly arranged workstations and inadequate recovery can contribute to musculoskeletal disorders and fatigue. Risk depends on the whole activity, including load characteristics, reach, pace, duration, space, handling aids and individual needs. An ergonomic assessment observes real work and involves workers in identifying difficult steps and testing improvements. The priority is to remove unnecessary handling, redesign the process or workstation and provide suitable equipment before relying on technique training alone. Office DSE, construction handling, warehouse picking and housekeeping need different practical arrangements. SHARE groups these related risks to support better work design, assessment and verification of controls.

Updated 2026-10-19UK workplace guidance

Understanding Hazard group - ergonomic hazards

Ergonomic hazards arise when work demands, equipment or the working environment do not fit the people carrying out the task. Manual handling, repetitive movements, forceful exertion, sustained or awkward postures, poorly arranged workstations and inadequate recovery can contribute to musculoskeletal disorders and fatigue. Risk depends on the whole activity, including load characteristics, reach, pace, duration, space, handling aids and individual needs. An ergonomic assessment observes real work and involves workers in identifying difficult steps and testing improvements. The priority is to remove unnecessary handling, redesign the process or workstation and provide suitable equipment before relying on technique training alone. Office DSE, construction handling, warehouse picking and housekeeping need different practical arrangements. SHARE groups these related risks to support better work design, assessment and verification of controls.

Why this matters at work

Vibration, forceful grip, tool support and posture may interact, but their assessments answer different questions. An ergonomic improvement does not establish controlled vibration exposure or remove the need for competent vibration advice and appropriate health arrangements. Examine the actual equipment, work material, condition, duration and other tasks. Prefer suitable processes and equipment that reduce the source demand, with maintenance and practical support. Keep hand-arm and vehicle-related whole-body vibration distinct and use the relevant specialist route rather than a single posture score.

Ergonomics examines how a task, equipment, information, environment and organisation fit the people doing the work. Assess physical effort and cognitive demand together with duration, pace and opportunities for variation. A photograph of a straight back cannot establish acceptable exposure during a whole shift. Observe the cycle, interruptions and less frequent demanding stages. Identify how layout or production requirements make an apparently sensible instruction difficult to follow. Include maintenance and support staff who experience different demands from the main operator.

How organisations manage this in practice

Information and control design affect how people recognise conditions and act. Examine confusing layouts, inconsistent meanings, dense displays, competing tasks and workload under normal and disrupted conditions. A person may miss a critical message because the system makes it difficult to detect or interpret, not because they lack commitment. Reduce unnecessary demand, improve usable information and coordinate handovers through competent design. An ergonomic review of usability is not validation of a safety-critical control system or permission to alter an interlock.

Handling risk can be created before the worker arrives: packaging, delivery location, storage height and route condition shape the task. Include procurement and supply arrangements in the assessment. Reduce unnecessary transfer, awkward stock presentation and carrying through uneven areas. A smaller package may reduce one lift but increase movement frequency, so assess the overall job. Suitable aids, surfaces and maintenance must work together. Worker experience is valuable evidence, while individual strength is not a permanent control for poor system design.

Design for the people who actually use the work system, including temporary and agency workers, contractors and staff on different shifts. Individual needs should be considered through consultation and suitable professional advice without stereotyping whole groups. A competent owner must be able to change equipment, layout, staffing or procurement and secure resources. Workers identify practical difficulties and test improvements; their involvement does not transfer employer responsibility. Complex ergonomic questions may need specialist input, while health decisions belong to appropriate qualified professionals.

What are ergonomic hazards and what does their assessment cover?

Ergonomic assessment examines the fit between people, equipment, work tasks and organisation. Risk depends on force, repetition, posture, duration, recovery and individual needs rather than posture alone. Manual handling is not only lifting. Do not treat a posture score or generic lifting limit as a complete assessment. Vibration also requires an exposure based assessment. See Ergonomics and human factors at work and Manual handling at work.

Start with the hazard group overview, then use the related topic links for task-specific background. A group checklist helps discovery; it does not establish that the controls at your site are effective. Read the hazard group overview.

Which hazards should the assessment consider?

Check each relevant mechanism during normal work, cleaning, maintenance, foreseeable failure and emergencies. Several entries can share a harm pathway; follow the linked explanation rather than treating each label as a separate assessment. See Ergonomics and human factors at work and Manual handling at work.

Hazard or exposure and practical application — part 1 of 4

Hazard or exposure and practical application — part 1 of 4. Compare the named situations, controls and evidence together. Original SHARE explanation; apply the linked source in its stated jurisdiction.
Learning point: Compare the named situations, controls and evidence together. Original SHARE explanation; apply the linked source in its stated jurisdiction.
Read the complete visual as text
  1. Poor posture: Read the mechanism and controls: Posture reach and workstation design
  2. Awkward working positions: Read the mechanism and controls: Posture reach and workstation design
  3. Poor workstation design: Read the mechanism and controls: Posture reach and workstation design
  4. Repetitive movements: Read the mechanism and controls: Repetition force and tool design

Hazard or exposure and practical application — part 2 of 4

Hazard or exposure and practical application — part 2 of 4. Compare the named situations, controls and evidence together. Original SHARE explanation; apply the linked source in its stated jurisdiction.
Learning point: Compare the named situations, controls and evidence together. Original SHARE explanation; apply the linked source in its stated jurisdiction.
Read the complete visual as text
  1. Forceful exertions: Read the mechanism and controls: Repetition force and tool design
  2. Improper tool design: Read the mechanism and controls: Repetition force and tool design
  3. Heavy lifting: Read the mechanism and controls: Lifting carrying and manual handling

Hazard or exposure and practical application — part 3 of 4

Hazard or exposure and practical application — part 3 of 4. Compare the named situations, controls and evidence together. Original SHARE explanation; apply the linked source in its stated jurisdiction.
Learning point: Compare the named situations, controls and evidence together. Original SHARE explanation; apply the linked source in its stated jurisdiction.
Read the complete visual as text
  1. Manual handling: Read the mechanism and controls: Lifting carrying and manual handling
  2. Pushing and pulling: Read the mechanism and controls: Pushing pulling and movement resistance
  3. Prolonged sitting or standing: Read the mechanism and controls: Prolonged sitting standing and breaks

Hazard or exposure and practical application — part 4 of 4

Hazard or exposure and practical application — part 4 of 4. Compare the named situations, controls and evidence together. Original SHARE explanation; apply the linked source in its stated jurisdiction.
Learning point: Compare the named situations, controls and evidence together. Original SHARE explanation; apply the linked source in its stated jurisdiction.
Read the complete visual as text
  1. Inadequate rest breaks: Read the mechanism and controls: Prolonged sitting standing and breaks
  2. Vibration exposure: Read the mechanism and controls: Vibration and whole task exposure
  3. Cognitive ergonomics and interfaces: Read the mechanism and controls: Cognitive ergonomics and control interfaces

Describe when the source is created or released and how it reaches someone. Compare normal operation with receipt, setup, blockage, breakdown, disposal and contractor access. The list below is a discovery aid: an omitted mechanism may still be important, while an irrelevant item does not require a fabricated assessment. Follow the mechanism explanation and test controls against the actual circumstances before scoring risk.

What makes a task ergonomically unsuitable for the person doing it?

Ergonomics considers the interaction between human capabilities, tasks, equipment, environment and organisation. Musculoskeletal risk can reflect force, repetition, posture, duration, recovery and individual factors together. A comfortable looking posture is not evidence that a repetitive task is adequately controlled. Cognitive load and unclear interfaces may also produce errors that affect safety. Observe a full work cycle and different demand levels before proposing redesign. See Ergonomics and human factors at work and Managing upper limb disorders in the workplace.

Consider the task, load or tool, environment and intended users together. A bench height that suits one operation may create a long reach in another; a heavier but powered aid may remove force while creating an access problem. Involve workers in trials and observe normal demand, not a demonstration with an empty load. Appropriate adjustment and recovery should be usable without compromising safety or service quality.

Which ergonomic assessment method fits the actual task?

Health and Safety Executive (HSE) offers tools for lifting and carrying, repetitive upper limb tasks and pushing or pulling. Choose the method for the actual activity; a score is a screening or assessment aid rather than a complete determination of all risks. Tools do not remove the need to consider people, task variation, environmental conditions and the effectiveness of controls. Do not turn a guideline value into a universal legal lifting limit. See HSE Toolkit for assessing musculoskeletal disorders and Manual handling at work.

Use screening tools to identify where a closer assessment is needed, not as certificates that any task below a number is safe. Lifting, repetitive upper-limb work, pushing and pulling and screen work have different information needs. A competent assessor must also consider unpredictable loads, people handling and unusual conditions beyond a tool's scope. Record the real change that reduces demand and verify it through observations and worker feedback.

How do reach, posture and workstation layout contribute to harm?

Bending, twisting, reaching and constrained positions can load joints and muscles, especially when combined with force and time. Poor layout may force people to defeat other controls. See Ergonomics and human factors at work and Working with display screen equipment (DSE).

A care worker bends over a low bed, a packer reaches across a conveyor and a screen user works with an awkwardly placed display. Sustained or repeated loading affects muscles and joints; layout can force a poor posture even where staff know a preferred technique. The complete task includes reaching, turning, viewing and handling, not one frozen posture.

Which source controls and checks change the outcome?

Remove unnecessary handling or viewing steps and redesign heights, reach distances and access for the intended users. Trial adjustable equipment with workers and check that it does not move the problem to another task. A competent assessor observes normal demand, while supervisors review workarounds and reported discomfort. Alternate activity and appropriate recovery supplement design. Stop or modify a task when equipment cannot be adjusted or used as assessed; posture instruction alone is not a redesign.

How should the controls be applied?

Adjust work height and reach, bring materials close, improve visibility and design access for the full range of workers and tasks.

When should work stop or be escalated?

Hold the affected activity if a critical safeguard is missing, fails its check or no longer matches the assessed conditions. Trial the change with users through a complete cycle. Do not select furniture or positioning solely from a photograph.

How can repeated or forceful tool use cause musculoskeletal harm?

Repeated arm or hand movements with force or poor grip can contribute to upper limb disorders. Tool mass, trigger design, vibration and production pace interact. See Managing upper limb disorders in the workplace and Ergonomics and human factors at work.

An assembler repeats a pinch grip, a kitchen employee cuts resistant products and a tradesperson uses a poorly matched tool. Repetition, force, wrist position and limited recovery combine; the same cycle count can carry different demands with different material or grip. Tool weight and vibration can add load.

Which source controls and checks change the outcome?

Eliminate unnecessary cycles, use a more suitable process or tool and reduce the force through fixture, maintenance and workstation design. The purchaser and assessor trial tools with representative users and material, checking quality and any new entanglement risk. Manage remaining exposure and recovery without rotating staff into another equally demanding task. Report loss of tool performance or discomfort; reassess on product change rather than assuming a completed training session remains sufficient.

How should the controls be applied?

Reduce unnecessary repetition, select suitable grips and tools, redesign processes and provide meaningful recovery and variation.

When should work stop or be escalated?

Hold the affected activity if a critical safeguard is missing, fails its check or no longer matches the assessed conditions. Observe cycle time, force and recovery. Job rotation is only useful if it genuinely changes exposure rather than repeating similar demands.

How do lifting and carrying tasks become harmful?

Loads are not only their weight. Size, grip, distance, posture, handling frequency and the environment can make a task hazardous. Handling people requires individual care and dignity as well as risk control. See Manual handling at work and HSE Toolkit for assessing musculoskeletal disorders.

A warehouse employee carries a bulky carton, a care worker assists a person and a construction worker moves material through restricted access. Load weight is only one factor: size, grip, unpredictability, distance, twisting, space and individual capability change the demand. The handled person must not be described as the hazard.

Which source controls and checks change the outcome?

Avoid the lift by changing delivery or layout, then assess mechanised or aided handling for the task and users. Verify the aid, space, route and load compatibility before use; a lifting aid can create crushing or instability hazards if poorly matched. Instruction and a task-specific method address remaining handling. There is no universal safe weight for every person and task. Stop when the aid, staffing or route differs from the assessed arrangement and obtain a revised plan.

How should the controls be applied?

Avoid hazardous handling where possible, use suitable mechanical assistance and assess remaining tasks. Design delivery and storage to prevent floor to high level handling.

When should work stop or be escalated?

Hold the affected activity if a critical safeguard is missing, fails its check or no longer matches the assessed conditions. Training alone does not make a poor task safe. Use appropriate tools and competent task assessment rather than a universal kilogram limit.

Why can moving a wheeled load still cause injury?

Poor wheels, slopes, rough surfaces and starting resistance can create high forces even when the load is not lifted. Sightlines and stopping control also matter. See HSE Toolkit for assessing musculoskeletal disorders and Ergonomics and human factors at work.

A hospital porter moves a bed, a cleaner pushes a trolley and a logistics worker handles a wheeled cage over a threshold. Starting force, slopes, wheel defects, handle height and stopping the load can stress the body or cause a collision. Wheels remove lifting but do not automatically remove handling risk.

Which source controls and checks change the outcome?

Remove unnecessary journeys, choose a suitable powered or lower-resistance system and improve wheels, surfaces, gradients and space. The assessor trials starting, steering and stopping with realistic loads and users, while maintenance keeps the equipment within that specification. Plan routes and manage remaining demand. Stop if a wheel binds, a brake fails, the load obscures the route or assistance is inadequate; do not overcome a defect by adding uncontrolled force.

How should the controls be applied?

Improve routes and wheels, choose suitable powered assistance where appropriate, and organise loads and maintenance.

When should work stop or be escalated?

Hold the affected activity if a critical safeguard is missing, fails its check or no longer matches the assessed conditions. Observe starting, stopping and turning under real loading. Consider the relevant HSE pushing and pulling method and transport interface.

How do static work and inadequate recovery affect a worker?

Static positions and insufficient variation can produce fatigue or discomfort. A task may be sedentary yet cognitively demanding. Break availability depends on staffing and workload, not just a policy. See Ergonomics and human factors at work and Working with display screen equipment (DSE).

A checkout worker stands with limited movement, a control-room operator sits through long periods and a microscope user holds a constrained position. Static muscle demand, restricted movement and task organisation can produce discomfort and fatigue. A break exists only in practice if workload and cover allow the person to take it.

Which source controls and checks change the outcome?

Redesign work to allow suitable posture variation and access, with seating or adjustable equipment appropriate to the task. Managers verify staffing and workflow permit recovery; workers should not have to abandon a critical control to obtain it. Assess the whole day, not one workstation photograph. Review repeated discomfort, skipped recovery and unsuitable adjustments through worker involvement. A generic stretching programme does not fix an immovable workstation or excessive workload.

How should the controls be applied?

Provide adjustable work and genuine task variation and recovery; design staffing and workflow so arrangements can be used.

When should work stop or be escalated?

Hold the affected activity if a critical safeguard is missing, fails its check or no longer matches the assessed conditions. Consult workers about actual break access and discomfort. No universal sitting or standing duration is established by this narrative.

How does vibration interact with ergonomic demands?

Vibration may compound gripping, posture and physical workload. Separate the exposure assessment from the musculoskeletal assessment because the control and surveillance decisions differ. See Hand-arm vibration at work: A brief guide and Ergonomics and human factors at work.

A roadworker grips a vibrating breaker in an awkward posture, while a vehicle operator experiences shocks and repeated twisting. Vibration adds to force and musculoskeletal demands but requires its own relevant exposure assessment. Reducing one exposure can leave the other unchanged.

Which source controls and checks change the outcome?

Avoid the operation or choose a suitable lower-vibration and lower-force method; improve tool support, routes, surfaces and seating for the whole task. The manager checks representative exposure and use, with specialist advice where needed, and maintains equipment. Task scheduling and instruction are supporting measures. Stop if a damaged tool, seat or surface creates an unassessed exposure; do not assume gloves or an ergonomic checklist resolve vibration risk.

How should the controls be applied?

Select suitable lower vibration methods, maintain tools and consider grip and support alongside exposure control.

When should work stop or be escalated?

Hold the affected activity if a critical safeguard is missing, fails its check or no longer matches the assessed conditions. Use current vibration specific assessment and competent advice, not an ergonomic posture score as proof of controlled vibration.

How can a poorly designed interface lead to an unsafe decision?

Confusing controls, poor displays and excessive information can increase error. Organisational pressures may cause workarounds that bypass safe design. See Ergonomics and human factors at work and Managing for health and safety (HSG65).

A control-room worker misreads similar alarms, a driver looks away to operate a poorly positioned display, or a nurse selects a confusing setting. Workload, signal visibility, feedback and recovery from error influence decisions. Labelling a mistake as carelessness misses the system that made it likely.

Which source controls and checks change the outcome?

Remove unnecessary choices and redesign controls, alarm priorities and feedback with competent user testing. Trial normal and abnormal scenarios, including noise, time pressure and changed staffing. Supervisors verify users can recognise and respond to critical signals; procedures and practice support rather than replace usable design. Hold release when a critical setting or alarm cannot be distinguished reliably, and investigate repeated workarounds before adding more warnings.

How should the controls be applied?

Design intuitive usable controls, prioritise information, provide clear handovers and reduce unnecessary competing demands.

When should work stop or be escalated?

Hold the affected activity if a critical safeguard is missing, fails its check or no longer matches the assessed conditions. Test interfaces with the people who use them, including degraded and emergency conditions. Avoid attributing every error to individual carelessness.

How should this hazard group be assessed and managed in practice?

Observe picking, packing or computer work across a full cycle and different shifts. Discuss discomfort and variation with workers and consider task changes, workstation adjustability and handling aids. Avoid hazardous handling where possible. Redesign loads, reach distances, tool grip and workstation layout; provide appropriate aids and variation. Check that breaks, staffing and production targets support the redesigned task. Manual handling and Display screen equipment (DSE) assessments; task observations; worker feedback; design trial results; procurement requirements; action tracking and follow up on symptoms. Follow the assessment through procurement, implementation, briefing, supervision and verification rather than stopping at a document. See Ergonomics and human factors at work and Manual handling at work.

Agree the activity, affected people and prerequisites with operations, workers and any contractor before work. Test whether the task can be removed or redesigned, then verify selected controls in the place they will operate. During work, the supervisor compares conditions with the assessed method and has authority to stop. Completion includes safe waste or equipment handling, outstanding defects and a named hand-back decision; a completed risk form is not the end of the control process.

What must be established before assigning a risk score?

Identify the actual activity, foreseeable harm, people exposed and controls already demonstrated to work. Consider start up, normal operation, cleaning, maintenance, breakdown, emergency response and simultaneous work. A numerical matrix may support prioritisation but cannot establish compliance or replace a specialist assessment. Do not assign a residual risk score merely because a proposed control has been written into a form. Keep unknowns explicit and obtain site evidence before deciding that work can proceed. See Managing risks and risk assessment at work and Managing for health and safety (HSG65).

Write a short causal description: the work creates or releases something, a person is exposed by a particular route, and a specified injury or ill-health outcome is foreseeable. Establish whether existing measures work in the actual task before estimating likelihood. An unknown material, unverified safe state or absent critical control is a decision gap, not a reason to select a reassuring number. The responsible manager records what must be resolved and who can authorise the next step.

Who owns each control and how should it be verified?

The dutyholder provides resources and arrangements. The operational manager assigns each control to someone able to implement it. Supervisors verify the controls at the point of work and respond to defects. Workers and representatives explain work as done and report problems. Specialist advisers address limits of local competence. Record the control, responsible role, evidence, check method, due date and escalation route. Completion of a training course or signature alone does not demonstrate effective risk control. See Managing for health and safety (HSG65).

Separate the person who funds and owns the control from the person who performs its check. For an engineered measure, record the accepted performance or condition, who verifies it, what a failed result means and how maintenance is coordinated. For a staffing or organisational measure, check actual cover, authority and staff experience. A signature confirms a recorded action, not effectiveness. The supervisor must be able to hold work and obtain a competent remedy when the required condition is not met.

Who might be affected, including people outside the work team?

Include employees, agency workers, apprentices, contractors, cleaners, maintainers, delivery drivers, service users, visitors and nearby public. Consider inexperience, pregnancy, disability, health conditions, language needs and lone work individually and without stereotyping. Consultation should identify barriers to controls rather than collect unnecessary medical details. Share relevant interface information between employers. A single activity may require several hazard groups; avoid splitting the assessment so that interacting controls have no clear owner. See Managing risks and risk assessment at work and Managing for health and safety (HSG65).

Walk through the job from the perspective of someone who has not received the operator briefing: a cleaner, visiting driver, contractor, new starter or occupant of an adjoining area. Ask whether a control protects them during arrival, normal work, waste removal and emergencies. Agree who controls each shared boundary and how changes are communicated. Individual needs influence a suitable arrangement but do not justify treating an employee, disability or health condition as the hazard.

When should the assessment be reviewed and what evidence matters?

Reassess when equipment, materials, staffing, layout, working hours or environmental conditions change; after incidents, near misses, complaints, symptoms or evidence of failed controls; and through planned risk based review. Verify improvements under realistic demand, not only during an announced inspection. Retain dated observations, measurements where relevant, maintenance records and action closure evidence. No single review interval suits every risk. Health surveillance, exposure monitoring and clinical diagnosis are different activities and require their own competent arrangements. See Managing risks and risk assessment at work and Managing for health and safety (HSG65).

Use a change or failure to test the original assumptions, not merely change the date on the form. A different product, higher throughput, altered route, new shift or contractor may change the harm pathway. Keep observations, applicable measurements, defects and authorisation evidence linked to the task. After correction, verify under representative demand and with affected workers. Repeated workarounds or symptoms require investigation of the design and organisation, even when no injury has been recorded.

How could ergonomic hazards arise in construction and civil engineering?

In construction and civil engineering, site workers position bulky kerbs repeatedly. Redesign delivery and use suitable handling assistance. Task observation and aid trial. This is an illustrative application, not a documented case or a complete method statement. See Manual handling at work and HSE Toolkit for assessing musculoskeletal disorders.

Sequence the job with adjacent trades, delivery routes and the changing work area; the contractor supervisor must check the actual stage before releasing work. The assessment must test the stronger source-control option, then verify the remaining safeguards under representative demand. Hold the affected activity if a critical control fails or conditions no longer match the plan; the responsible competent person determines correction and release. Keep the task observation, decision, check and hand-back evidence, not just a course attendance record.

How could ergonomic hazards arise in manufacturing and engineering?

In manufacturing and engineering, assembly workers grip tools throughout a shift. Reduce force and repetition through fixture and tool design. Cycle observation and worker feedback. This is an illustrative application, not a documented case or a complete method statement. See Managing upper limb disorders in the workplace and Ergonomics and human factors at work.

Include startup, product change, cleaning and maintenance as well as the normal cycle; the production supervisor and maintainer agree who can stop and hand back the equipment. The assessment must test the stronger source-control option, then verify the remaining safeguards under representative demand. Hold the affected activity if a critical control fails or conditions no longer match the plan; the responsible competent person determines correction and release. Keep the task observation, decision, check and hand-back evidence, not just a course attendance record.

How could ergonomic hazards arise in warehousing and logistics?

In warehousing and logistics, pickers reach above shoulder level for heavy stock. Change slotting and storage and use suitable aids. Handling assessment and route observations. This is an illustrative application, not a documented case or a complete method statement. See Manual handling at work.

Assess peak demand, vehicles, loads and visiting drivers together; the shift manager verifies separation and handling arrangements before releasing the route. The assessment must test the stronger source-control option, then verify the remaining safeguards under representative demand. Hold the affected activity if a critical control fails or conditions no longer match the plan; the responsible competent person determines correction and release. Keep the task observation, decision, check and hand-back evidence, not just a course attendance record.

How could ergonomic hazards arise in agriculture and forestry?

In agriculture and forestry, farm workers lift sacks over uneven ground. Improve storage transfer and eliminate avoidable carrying. Load and route assessment. This is an illustrative application, not a documented case or a complete method statement. See Manual handling at work.

Consider seasonal work, lone locations, animals, terrain and access to help; the task manager verifies the method and communication before the crew starts. The assessment must test the stronger source-control option, then verify the remaining safeguards under representative demand. Hold the affected activity if a critical control fails or conditions no longer match the plan; the responsible competent person determines correction and release. Keep the task observation, decision, check and hand-back evidence, not just a course attendance record.

How could ergonomic hazards arise in healthcare and social care?

In healthcare and social care, care workers transfer dependent people. Use person and task specific handling plans and suitable aids. Competent handling review and aid checks. This is an illustrative application, not a documented case or a complete method statement. See Manual handling at work and Managing risks and risk assessment at work.

Account for the person receiving care, infection control, dignity and changing assistance needs; the service manager coordinates the individual and task arrangements. The assessment must test the stronger source-control option, then verify the remaining safeguards under representative demand. Hold the affected activity if a critical control fails or conditions no longer match the plan; the responsible competent person determines correction and release. Keep the task observation, decision, check and hand-back evidence, not just a course attendance record.

How could ergonomic hazards arise in hospitality and food production?

In hospitality and food production, kitchen staff handle trays at awkward oven heights. Review work height grip and heat interfaces. Task observation and design trial. This is an illustrative application, not a documented case or a complete method statement. See Ergonomics and human factors at work.

Check food operations, cleaning, public access and busy service periods together; the kitchen or service supervisor must be able to interrupt the task without leaving another exposure uncontrolled. The assessment must test the stronger source-control option, then verify the remaining safeguards under representative demand. Hold the affected activity if a critical control fails or conditions no longer match the plan; the responsible competent person determines correction and release. Keep the task observation, decision, check and hand-back evidence, not just a course attendance record.

How could ergonomic hazards arise in retail and public services?

In retail and public services, checkout workers repeat scanning with little recovery. Improve reach and genuine task variation. Repetition assessment and break evidence. This is an illustrative application, not a documented case or a complete method statement. See Managing upper limb disorders in the workplace.

Include customers, visitors and staff who arrive without the task briefing; the premises manager verifies access and a safe service alternative before the activity starts. The assessment must test the stronger source-control option, then verify the remaining safeguards under representative demand. Hold the affected activity if a critical control fails or conditions no longer match the plan; the responsible competent person determines correction and release. Keep the task observation, decision, check and hand-back evidence, not just a course attendance record.

How could ergonomic hazards arise in offices and professional services?

In offices and professional services, office staff use laptops for extended work. Provide suitable adjustable equipment and work variation. DSE assessment and implemented changes. This is an illustrative application, not a documented case or a complete method statement. See Working with display screen equipment (DSE).

Include contractors, hybrid working and occupied-space interfaces; the facilities or team manager checks the actual setup and how problems are reported. The assessment must test the stronger source-control option, then verify the remaining safeguards under representative demand. Hold the affected activity if a critical control fails or conditions no longer match the plan; the responsible competent person determines correction and release. Keep the task observation, decision, check and hand-back evidence, not just a course attendance record.

How could ergonomic hazards arise in education and laboratories?

In education and laboratories, laboratory staff repeat pipetting and microscope work. Review tool force positioning and recovery. Cycle and workstation observations. This is an illustrative application, not a documented case or a complete method statement. See Managing upper limb disorders in the workplace and Ergonomics and human factors at work.

Separate learner awareness from authorised operation and specialist intervention; the responsible teacher, technician or laboratory manager checks material identity and supervision. The assessment must test the stronger source-control option, then verify the remaining safeguards under representative demand. Hold the affected activity if a critical control fails or conditions no longer match the plan; the responsible competent person determines correction and release. Keep the task observation, decision, check and hand-back evidence, not just a course attendance record.

How could ergonomic hazards arise in utilities and waste management?

In utilities and waste management, waste crews manoeuvre heavy bins on slopes. Improve route wheel condition and assistance. Pushing and pulling assessment. This is an illustrative application, not a documented case or a complete method statement. See HSE Toolkit for assessing musculoskeletal disorders.

Plan for unknown material, remote access and interfaces with the public or other operators; the supervisor holds the job until necessary identification and control evidence is available. The assessment must test the stronger source-control option, then verify the remaining safeguards under representative demand. Hold the affected activity if a critical control fails or conditions no longer match the plan; the responsible competent person determines correction and release. Keep the task observation, decision, check and hand-back evidence, not just a course attendance record.

How could ergonomic hazards arise in energy and process industries?

In energy and process industries, control room teams monitor dense alarm displays. Improve information prioritisation and handover design. User testing and error review. This is an illustrative application, not a documented case or a complete method statement. See Ergonomics and human factors at work.

Manage plant state, material change, connected systems and maintenance through competent process arrangements; the shift authority checks prerequisites and controls hand-back. The assessment must test the stronger source-control option, then verify the remaining safeguards under representative demand. Hold the affected activity if a critical control fails or conditions no longer match the plan; the responsible competent person determines correction and release. Keep the task observation, decision, check and hand-back evidence, not just a course attendance record.

How could ergonomic hazards arise in events and transport operations?

In events and transport operations, event crews manually move stage sections. Plan suitable handling equipment and coordinated routes. Handling assessment and equipment checks. This is an illustrative application, not a documented case or a complete method statement. See Manual handling at work.

Consider temporary equipment, weather, crowds, routes and limited setup time; the coordinator verifies the current layout and a workable stop or closure route. The assessment must test the stronger source-control option, then verify the remaining safeguards under representative demand. Hold the affected activity if a critical control fails or conditions no longer match the plan; the responsible competent person determines correction and release. Keep the task observation, decision, check and hand-back evidence, not just a course attendance record.

Will manual-handling training make the task safe?

Training supports suitable design and aids but does not remove excessive force, repetition or poor access. Evaluate task redesign first and verify the remaining exposure. See Manual handling at work and Ergonomics and human factors at work.

How do you put the controls into practice?

Move from recognising harm to deciding, implementing, checking and improving the controls. Give each critical control an owner, a check method and a clear escalation route. See Managing risks and risk assessment at work and Managing for health and safety (HSG65).

From work activity to verified control
  1. Understand the taskObserve people, equipment, materials and interfaces.
  2. Describe the harmIdentify exposure, energy release and foreseeable failure.
  3. Control at sourceAvoid, redesign, substitute, contain or separate the hazard.
  4. Check in real workVerify performance, defects, ownership and change triggers.
StageActionWho actsEvidence to retain
Before workConfirm the actual task, people, equipment, substances, location and abnormal conditions.Operational manager with competent adviceAssessment, observations, consultation and required specialist checks
Control deliveryAvoid hazardous handling where possible. Redesign loads, reach distances, tool grip and workstation layout; provide appropriate aids and variation. Check that breaks, staffing and production targets support the redesigned task.Responsible manager and authorised implementersManual handling and DSE assessments; task observations; worker feedback; design trial results; procurement requirements; action tracking and follow up on symptoms.
During workSupervise the real activity; check that critical controls remain effective and workers can report problems.Supervisor and workersChecks, defects, changes and escalations
Stop and restartStop the affected activity when serious danger or a failed critical control is suspected. Restart only through the competent site authorisation arrangements.Supervisor and authorised competent personReason for stopping, corrective action, verification and restart authority
ReviewRevisit controls after change, incidents, near misses, symptoms or repeated defects. Check effectiveness rather than counting completed forms.Manager, Occupational safety and health (OSH) adviser and worker representativesDated review, closure evidence and lessons for design and procurement

How does ERICPD apply to ergonomic hazards?

ERICPD stands for Eliminate, Reduce, Isolate, Control, PPE and Discipline. For ergonomic hazards, start by removing the hazardous task or source where practicable, then reduce and separate the remaining exposure. Combine suitable safeguards and work arrangements, use relevant personal protective equipment for residual risks, and keep all selected measures effective in everyday work. See HSE: Managing risk using PPE and Managing for health and safety (HSG65).

ERICPD: six decisions for selecting and sustaining controls
  1. 1 · E Eliminate

    Remove the hazardous task or source where practicable; confirm that the alternative still fulfils the task and assess remaining hazards.

  2. 2 · R Reduce

    Use a suitable less hazardous material, process or equipment, or reduce the hazard at source. Check any new risks introduced.

  3. 3 · I Isolate

    Separate people from the hazard through suitable containment, guarding, barriers or other task-specific separation.

  4. 4 · C Control

    Put remaining safeguards and workable task arrangements in place. Engineering controls and administrative arrangements have different strengths.

  5. 5 · P PPE

    Select personal protective equipment for relevant residual exposure. Check suitability, fit, compatibility, use and maintenance.

  6. 6 · D Discipline

    Sustain the controls through management support, supervision, maintenance and learning. Resolve workarounds and failures without blaming workers.

Eliminate, Reduce and Isolate focus attention on the hazard and the exposure pathway before reliance on behaviour or PPE. Controls usually work together: an enclosure may still need safe access, maintenance and instruction. Record the reasons for choosing or rejecting stronger options and check the complete task, including cleaning, maintenance and foreseeable changes.

ERICPD is a practical learning mnemonic. The five-level hierarchy is elimination, substitution, engineering controls, administrative controls and PPE. Reduce may include substitution or source reduction; Isolate commonly involves engineering. Control can include engineering and administrative measures. Discipline supports every selected level and is not an additional protective barrier. These frameworks are related; their labels do not form identical statutory ladders.

What does each role need to know and demonstrate?

People need learning and demonstrated competence for the decisions they actually make, not the same course at every organisational level. See Ergonomics and human factors at work and Manual handling at work.

For ergonomic hazards, frontline learning must enable staff to use the assessed handling aid and report difficult or painful work. Supervisors need to observe full cycles, workarounds, recovery and changes in load. Design, procurement and specialist assessment require deeper competence in task redesign, aid selection and user trials. Awareness, supervised practice, assessment and authorisation are different stages; an attendance record alone does not establish competence or permit specialist intervention.

Assess practical understanding with the actual task and credible abnormal conditions. The assessor must be competent for the scope being tested; authorisation should state its boundaries. Reassess after a material change, a defect, a demonstrated gap or work outside that scope rather than assuming one fixed refresher interval suits every role.

RoleLearning and decisionsAssessment, evidence and reassessment
Nearby staff and new startersRecognise the relevant exposure, usable routes, warning signs and reporting or emergency arrangements.Supervisor checks a practical explanation and scenario response; retain briefing scope and gaps. Repeat when routes or conditions change.
Frontline usersDemonstrate how to use the assessed handling aid and report difficult or painful work, including the checks, limits and stop decision.Competent task assessor observes representative practice and a defect scenario; record task, equipment/material scope and authorisation. Reassess for changed methods or performance gaps.
Specialist workers and maintainersDemonstrate the applicable technical method, safe state, interface controls and hand-back; do not infer specialist skill from general awareness.Competent specialist assesses work within a defined scope; retain method, assessment and authorisation evidence. New equipment, material or fault type may need a new decision.
Supervisors and coordinatorsDemonstrate how to observe full cycles, workarounds, recovery and changes in load, manage a changed condition and hold or release work.Manager or competent reviewer tests a realistic planning and stop/restart scenario; retain observed decisions and corrective actions. Review following interface failures.
Managers, purchasers and designersMake and resource decisions on task redesign, aid selection and user trials, including the stronger-control options and residual risks.Competent review of specifications, trials, procurement acceptance and effectiveness evidence; record decision owner and outstanding actions. Reassess after process or organisational change.
OSH advisers, technical specialists and auditorsDistinguish jurisdiction and source limits, test representative evidence and recognise the boundary of their competence.Appropriately competent review of the actual assessment, sources, sampling and closed actions; retain scope and limitations. Escalate missing technical information rather than inventing a conclusion.

How can the hierarchy of controls reduce ergonomic hazards and physical strain?

Packers repeatedly lift bulky cartons from low storage to a dispatch bench. Reach, force, repetition and limited recovery can combine to cause musculoskeletal injury. The full cycle includes retrieving, turning, carrying and placing the carton.

Illustrative SHARE example: assess stronger options first, then combine the measures needed for the remaining task. If elimination removes the task entirely, later measures address only remaining or different hazards. Each stage below explains what changes, how harm is reduced and who verifies it.

Applying ERICPD to other hazards in this group

For screen work, tool use and pushing loads, redesign the fit between people and the task: improve adjustment, reach, grip, rolling resistance and recovery. Assess representative users and real demand. There is no single safe lifting weight that applies to every task and person.

Keep an assessment record of the chosen controls, reasons for the selection, action owner, verification evidence and failure response. A failed critical control requires the affected activity to be held and corrected through the competent site arrangements; PPE or a completed form does not override that decision.

Guidance supporting these teaching examples

How can a care team assess a changed moving-and-handling task?

Manage this activity by preventing exposure at source, coordinating the affected people and verifying the planned controls before release. A care service changes room layout and finds that its normal handling aid no longer fits the route. The person receiving assistance has individual needs, while staff face force, reach, space and unpredictable movement demands. A person is not the hazard; the mismatch between the task, equipment, environment and support can cause harm. See Manual handling at work and HSE Toolkit for assessing musculoskeletal disorders.

Illustrative SHARE workplace example

What must be agreed before work starts?

The service manager and competent assessor consult the person and staff and consider avoiding unnecessary transfers or changing the room and method. They verify a suitable aid, compatible attachments where applicable, space and staffing against current instructions and the individual plan. Staff practise and demonstrate the actual method under supervision. A generic lifting course or a universal weight limit is not sufficient.

What changes, stops or hand-back decisions matter?

If the aid cannot be used as assessed, staffing is inadequate or the person's needs change, stop and obtain a suitable revised plan rather than improvising extra force. Check cleaning, storage and maintenance of the aid after use. Keep the assessment, instruction and follow-up observations with appropriate confidentiality. Review the design if repeated workarounds appear; successful completion once does not prove that the method is sustainable.

How should jurisdiction, local rules and management assurance be handled?

Apply the law and regulator guidance for the work location, then use competent task and equipment information to establish the practical arrangements. See Managing risks and risk assessment at work and Managing for health and safety (HSG65).

HSE guidance generally addresses Great Britain; Northern Ireland has its own instruments and Health and Safety Executive for Northern Ireland (HSENI) route. Construction, dangerous substances, equipment and other specialist topics need the applicable instrument, not a Great Britain (GB) duty copied into a Northern Ireland (NI) answer. Fire arrangements also differ across the United Kingdom (UK) nations. Foreign project examples require destination-specific official advice and competent local assessment.

Distinguish a legal duty, regulator guidance, an organisation's rule and an illustrative SHARE method. A management system can link assessment, procurement, competence, maintenance, consultation and corrective action; a certification label or an unverified standard clause does not authorise work. For this group, sample evidence on task redesign, aid selection and user trials and compare the recorded method with the activity observed on site. Resolve conflicts or missing technical information with the responsible competent person.

How would redesigning repeated picking at a dispatch bench work in practice?

Packers repeatedly reach across a deep bench and lift bulky products from low storage. Force, reach, repetition and limited recovery can combine to cause musculoskeletal harm. The operations manager considers eliminating handling steps, moving products into a better position and selecting suitable handling aids before relying on lifting technique instruction. See Manual handling at work and HSE Toolkit for assessing musculoskeletal disorders.

Illustrative SHARE workplace example

What is required before and during the activity?

Before the change, observe the complete task across realistic demand and involve workers in a design trial. Check load characteristics, reach, space, aid suitability and how the new layout affects other users. During the trial, supervisors look for awkward workarounds, bottlenecks and discomfort. Stop or adapt the task when the selected aid cannot be used safely or the redesigned method creates a new uncontrolled risk.

What does safe completion and hand-back require?

Evaluate the trial with worker feedback and task observations before wider adoption. Keep assessment, procurement and follow-up evidence, and review after product, staffing or volume changes. An office workstation needs a different task assessment; the same body posture label does not imply the same intervention.

Acronyms and terms

These terms distinguish the source of harm, the exposure route and the controls needed for the actual work.

Letters or termExpansion or definitionMeaning in this topic
UKUnited KingdomA geographical description, not one identical set of health-and-safety instruments.
GBGreat BritainEngland, Scotland and Wales; HSE guidance is generally framed for this jurisdiction.
NINorthern IrelandA separate health-and-safety legal route overseen by HSENI.
HSEHealth and Safety ExecutiveThe GB regulator and a publisher of official workplace guidance.
HSENIHealth and Safety Executive for Northern IrelandThe NI regulator; check its applicable requirements and advice.
OSHOccupational safety and healthPreventing work-related injury and ill health.
PPEPersonal protective equipmentEquipment worn for remaining exposure; it does not replace stronger source controls.
Control of Substances Hazardous to Health (COSHH)Control of Substances Hazardous to HealthThe GB hazardous-substance assessment and exposure-control route.
DSEDisplay screen equipmentScreens and associated workstation work requiring a suitable assessment.
ERICPDEliminate, Reduce, Isolate, Control, PPE, DisciplineA learning mnemonic for selecting and sustaining controls; not a statutory ladder.
HazardA source or condition with potential for harmDescribe what creates harm, rather than calling a person the hazard.
ExposureA route or contact connecting source and personConsider dose, duration and circumstances where relevant.
Critical controlA measure essential to the safe arrangementDefine its required condition, check, owner and failure response.
Hand-backControlled return to operation or useConfirm people, equipment, protection and outstanding conditions before release.

Example handy documents

Useful records connect the actual task to control ownership, checks, stop decisions and verified hand-back. See Managing risks and risk assessment at work and Managing for health and safety (HSG65).

The following are examples of documents an organisation could create or adapt, not downloadable files or a complete safe system. Use the task-specific information and competent review before applying them. Keep private health information outside general operational records.

What should a task and harm-route assessment contain?

Record people, source, exposure or energy, foreseeable harm, existing controls, stronger options, residual uncertainty and the responsible decision owner.

What should a critical-control check and defect log contain?

Record the required condition, check method, responsible person, failed result, restricted work and verified corrective action.

What should a change and hand-back record contain?

Capture changed material, equipment, staffing, layout or conditions; prerequisites, hold decisions, competent verification and restart authority.

What should a competence and authorisation record contain?

Name the assessed task and scope, practical evidence, assessor, limits, supervision and reassessment triggers.

What should an operational learning review contain?

Link observations, complaints, near misses or relevant exposure evidence to a design or organisational change and an effectiveness check.

Documents to download

Download editable resources from the SHAREhub environment to support your work. Working forms and spreadsheet input areas are blank. Reports, plans, guides, briefings, procedures and policies contain completed worked example content to adapt.

Return to SHARE home