SHARE Knowledge Hub

Hazard group - environmental hazards

Environmental hazards are conditions in the surrounding environment that can make work, travel or emergency response unsafe. Heatwaves, cold, wind, rain, flooding, lightning, poor air quality and unstable ground may affect access, equipment stability, visibility, physical demand and the reliability of controls. Assessment considers the actual site, season, forecast, task and people exposed, including outdoor workers and those needing additional protection. Managers should avoid or reschedule unsafe work where possible, provide suitable shelter or engineering measures and define weather-related stop and restart criteria. Pollution risks, such as fuel spills, contaminated runoff and waste releases, are related but require their own environmental assessment and duties. SHARE uses this group to link worker exposure, changing site conditions and environmental protection without treating one checklist as sufficient for every location.

Updated 2026-10-19UK workplace guidance

Understanding Hazard group - environmental hazards

Environmental hazards are conditions in the surrounding environment that can make work, travel or emergency response unsafe. Heatwaves, cold, wind, rain, flooding, lightning, poor air quality and unstable ground may affect access, equipment stability, visibility, physical demand and the reliability of controls. Assessment considers the actual site, season, forecast, task and people exposed, including outdoor workers and those needing additional protection. Managers should avoid or reschedule unsafe work where possible, provide suitable shelter or engineering measures and define weather-related stop and restart criteria. Pollution risks, such as fuel spills, contaminated runoff and waste releases, are related but require their own environmental assessment and duties. SHARE uses this group to link worker exposure, changing site conditions and environmental protection without treating one checklist as sufficient for every location.

Why this matters at work

Worker hearing exposure and the effect of noise on neighbours involve different receptors, evidence and regulatory routes. Occupational guidance supports assessment of exposure and practical source reduction, while the England nuisance page explains the council and regulator route for relevant community effects. The same operation may need both assessments. An occupational result cannot establish nuisance compliance, and an absence of complaints cannot establish protection of workers. Avoid borrowing a numerical limit or permitted operating time from one context to answer the other.

Start with the actual activity and foreseeable harm before assigning a score. Environmental conditions change with the season, location, process, work rate and people. Record controls demonstrated to work and the evidence still missing. Assess normal operation, cleaning, maintenance and disruption, including simultaneous work. A matrix may help prioritise action but cannot establish compliance, technical suitability or individual medical fitness. Use specialist assessment where the exposure or engineering question exceeds local competence and keep its scope attached to the result.

How organisations manage this in practice

Weather may change the suitability of work at height, lifting and temporary structures during erection, operation or dismantling. Link environmental monitoring to the competent task plan, equipment configuration, site conditions and public interfaces. The selected lifting and height guidance supports planning and prevention; it does not supply a universal wind limit or structural design. Prefer arrangements that avoid exposure or reduce it before relying on personal protection. Those controlling the task must have usable suspension, safe-state and communication arrangements.

An environmental control works only when the people who need it can use it. Include employees, temporary staff, contractors, visitors and nearby public, with individual needs considered through consultation and appropriate professional advice. Assign an owner able to change work, provide facilities and coordinate interfaces. Supervisors check practical delivery at the point of work. Workers' reports reveal barriers and changing conditions; they do not transfer management responsibility. Competence and resources matter more than a title on an action list.

Retain the destination and exact official country page used at the time, its issue or update information, task and host responsibilities, accommodation and access arrangements, relevant local competence and the decision owner. Review shortly before departure and when conditions, work or advice change. Test practical communications and the management handover. Distinguish general travel advice from employer task assessment and local technical requirements. Keep personal travel or medical details in appropriate controlled records rather than a general teaching export.

What are environmental hazards and what does their assessment cover?

Environmental conditions affect work, travel, access and emergency response. Separate worker exposure from environmental pollution and assess the actual site, season and activity. The Environment Agency flood checklist applies to England. Met Office warnings cover the United Kingdom (UK) but are dynamic. Non UK disaster examples are retained as an overseas work signpost, not a claim of general UK prevalence. See Keep your top on and Noise at work: A brief guide to controlling the risks.

Start with the hazard group overview, then use the related topic links for task-specific background. A group checklist helps discovery; it does not establish that the controls at your site are effective. Read the hazard group overview.

Which hazards should the assessment consider?

Check each relevant mechanism during normal work, cleaning, maintenance, foreseeable failure and emergencies. Several entries can share a harm pathway; follow the linked explanation rather than treating each label as a separate assessment. See Keep your top on and Noise at work: A brief guide to controlling the risks.

Hazard or exposure and practical application — part 1 of 4

Hazard or exposure and practical application — part 1 of 4. Compare the named situations, controls and evidence together. Original SHARE explanation; apply the linked source in its stated jurisdiction.
Learning point: Compare the named situations, controls and evidence together. Original SHARE explanation; apply the linked source in its stated jurisdiction.
Read the complete visual as text
  1. Strong winds: Read the mechanism and controls: Wind rain and lightning
  2. Rain: Read the mechanism and controls: Wind rain and lightning
  3. Lightning: Read the mechanism and controls: Wind rain and lightning
  4. Flooding: Read the mechanism and controls: Flooding and recovery

Hazard or exposure and practical application — part 2 of 4

Hazard or exposure and practical application — part 2 of 4. Compare the named situations, controls and evidence together. Original SHARE explanation; apply the linked source in its stated jurisdiction.
Learning point: Compare the named situations, controls and evidence together. Original SHARE explanation; apply the linked source in its stated jurisdiction.
Read the complete visual as text
  1. Extreme temperatures heat and cold: Read the mechanism and controls: Heat cold humidity and extreme temperatures
  2. Humidity: Read the mechanism and controls: Heat cold humidity and extreme temperatures
  3. UV exposure: Read the mechanism and controls: Solar ultraviolet
  4. Poor air quality: Read the mechanism and controls: Air quality and pollutants

Hazard or exposure and practical application — part 3 of 4

Hazard or exposure and practical application — part 3 of 4. Compare the named situations, controls and evidence together. Original SHARE explanation; apply the linked source in its stated jurisdiction.
Learning point: Compare the named situations, controls and evidence together. Original SHARE explanation; apply the linked source in its stated jurisdiction.
Read the complete visual as text
  1. Wildlife: Read the mechanism and controls: Wildlife plants and insects
  2. Noise pollution: Read the mechanism and controls: Noise pollution and neighbours
  3. Sandstorms: Read the mechanism and controls: Overseas natural hazards

Hazard or exposure and practical application — part 4 of 4

Hazard or exposure and practical application — part 4 of 4. Compare the named situations, controls and evidence together. Original SHARE explanation; apply the linked source in its stated jurisdiction.
Learning point: Compare the named situations, controls and evidence together. Original SHARE explanation; apply the linked source in its stated jurisdiction.
Read the complete visual as text
  1. Earthquakes: Read the mechanism and controls: Overseas natural hazards
  2. Tsunami: Read the mechanism and controls: Overseas natural hazards
  3. Volcanic activity: Read the mechanism and controls: Overseas natural hazards

Describe when the source is created or released and how it reaches someone. Compare normal operation with receipt, setup, blockage, breakdown, disposal and contractor access. The list below is a discovery aid: an omitted mechanism may still be important, while an irrelevant item does not require a fabricated assessment. Follow the mechanism explanation and test controls against the actual circumstances before scoring risk.

Why must environmental hazards be assessed for the specific location?

Weather, water, ground, air and surroundings modify work hazards. Separate worker exposure from public health and environmental protection; one limit or assessment cannot address all three. Consider season, work intensity, duration, access and individual needs. Local observation and current forecasts matter. Overseas natural disasters listed in this group are destination prompts, not routine UK assumptions. See UK weather warnings and Temperature.

Describe the activity and receptors at that location: staff, visitors, nearby residents and contractors. Wind at an exposed lifting area, heat in a humid enclosed process and contamination after flooding have different control requirements. An official forecast supports planning but cannot specify every equipment or structure limit. Competent local assessment and applicable instructions set the operating conditions, monitoring, stop authority and recovery decision.

How should stop, continuity and recovery triggers be decided?

Define who monitors conditions, suspends work and coordinates safe access and shelter. Operating limits come from competent equipment or structural specifications, not a generic weather rule. Plan loss of power, communications and welfare. Recovery can expose people to electricity, contamination and unstable structures even after conditions improve. England flood guidance must be complemented by the appropriate services elsewhere. See Business flood plan checklists and UK weather warnings.

Set triggers early enough to allow a safe stop, withdrawal or closure, including the time needed to move people and secure equipment. Allocate who obtains forecasts, observes local conditions and makes the decision. Business continuity can provide an alternative service but does not authorise entry into an unsafe area. After interruption, check structure, utilities, contamination and protective systems as relevant; reopening is a separate condition-based decision.

How can wind, rain or lightning change the safety of outdoor work?

Wind affects lifting and structures; rain alters grip and visibility. Lightning is a separate threat to exposed work. See UK weather warnings and Working at height.

A gust affects an elevated platform, rain reduces grip and visibility or lightning threatens an outdoor crew. Temporary structures, tall equipment and the time needed to move people to safety make the consequences activity-specific. A weather warning is information for a decision, not a universal permission or prohibition.

Which source controls and checks change the outcome?

Avoid exposure through timing, location and design; have competent people set operating and stop criteria using actual equipment information and site conditions. Verify shelter, communications and a safe closure route before work. The named supervisor monitors conditions and stops before the safe arrangement is lost. Do not improvise a wind speed or lightning distance; reopening requires the agreed checks, not simply the warning ending.

How should the controls be applied?

Adapt methods and timing, use competent operating limits and define shelter and suspension arrangements.

When should work stop or be escalated?

Hold the affected activity if a critical safeguard is missing, fails its check or no longer matches the assessed conditions. Check actual conditions and current forecasts. No universal wind-speed or lightning-distance threshold is supplied.

Why is entering or reopening a flooded workplace hazardous?

Water can cut access and conceal hazards. Electrical and structural risks may remain after it recedes. See Business flood plan checklists and Electricity at work: Safe working practices.

Floodwater reaches a workshop supply, hides debris or carries contamination into occupied premises. Structural damage, electricity, infection and manual handling can combine during clean-up. A receding water level does not establish safe access or safe energisation.

Which source controls and checks change the outcome?

Use flood planning to reduce exposure and move people and critical operations out of danger where feasible. Restrict entry and have competent people assess structure, utilities and contamination before recovery. Managers coordinate contractors and the safe disposal and cleaning route. Stop when access, electricity status or contamination is uncertain; untrained staff must not reconnect supplies or enter flowing water. Record condition checks and authorised reopening separately from the business continuity decision.

How should the controls be applied?

Plan location-specific triggers and continuity; avoid floodwater and restrict recovery until competent checks.

When should work stop or be escalated?

Hold the affected activity if a critical safeguard is missing, fails its check or no longer matches the assessed conditions. Use the correct national warning service; England guidance is not a UK-wide legal or forecast rule.

How do temperature and humidity change physical demands?

Workload, moisture, clothing and recovery influence thermal harm and performance. See Temperature.

Outdoor labour, a humid production room or refrigerated storage changes the body's ability to lose or retain heat. Workload, clothing and recovery influence risk alongside the environment. Reduced dexterity or concentration can add machinery, driving or handling hazards.

Which source controls and checks change the outcome?

Change location, timing or method to avoid unnecessary exposure, then design shielding, ventilation and suitable recovery facilities. The responsible manager checks real workload, staffing and individual needs without imposing a single universal safe temperature. Supervisors monitor whether the arrangement works and respond to distress or failed controls. Appropriate clothing and recovery support the design; symptoms or loss of essential environmental control require stopping and obtaining appropriate help.

How should the controls be applied?

Reduce exposure through design, scheduling, shelter, ventilation and suitable recovery.

When should work stop or be escalated?

Hold the affected activity if a critical safeguard is missing, fails its check or no longer matches the assessed conditions. Assess task and conditions rather than one thermostat value; use medical routes for suspected illness.

How does outdoor work lead to ultraviolet exposure?

Repeated outdoor exposure matters even when the weather is cool. Heat and UV require distinct controls. See Keep your top on and Radiation.

Road, grounds and agricultural staff can accumulate ultraviolet exposure during ordinary outdoor work, including where temperature feels comfortable. Skin and eyes may be exposed directly or through reflection. A cloudy day or an absence of immediate discomfort does not prove that protection is unnecessary.

Which source controls and checks change the outcome?

Schedule or relocate avoidable exposure, provide usable shade and design tasks to reduce time in direct sun. The manager selects suitable clothing and other residual protection and ensures work organisation allows use. Supervisors check access to shade and that chosen protection remains practical for the task. Review changing season, workload and personal needs; sunscreen is a supplementary measure, not a replacement for design and suitable coverage.

How should the controls be applied?

Plan timing, shade, suitable clothing and supplementary protection for actual tasks.

When should work stop or be escalated?

Hold the affected activity if a critical safeguard is missing, fails its check or no longer matches the assessed conditions. Check practicality and seasonal change. Cool or cloudy conditions do not establish no exposure.

How do outdoor pollution and workplace emissions differ?

Ambient forecasts and work-generated contaminant assessments serve different purposes. Regional data cannot establish individual task exposure. See GOV UK Using the Daily Air Quality Index and Working with substances hazardous to health: A brief guide to COSHH.

A delivery worker operates beside traffic, a site generates dust and a building draws contaminated air into occupied rooms. Ambient pollution information describes an area, whereas a process-generated plume can create a much higher local exposure. Different substances, particle sizes and routes need different assessment.

Which source controls and checks change the outcome?

Avoid emissions or relocate the activity and receptors where possible, then use suitable source capture, separation and ventilation. A competent assessment verifies representative task exposure and building interfaces. Official forecasts support planning but do not replace the assessment of generated contaminants. Stop when a critical capture control fails or an unexpected plume reaches people; select any residual respiratory protection for the actual contaminant rather than using a generic air-quality label.

How should the controls be applied?

Use official forecasts to inform scheduling and separately control work emissions through Control of Substances Hazardous to Health (COSHH) and competent assessment.

When should work stop or be escalated?

Hold the affected activity if a critical safeguard is missing, fails its check or no longer matches the assessed conditions. Do not convert Daily Air Quality Index (DAQI) into an occupational limit or certify safety from a forecast.

How can wildlife, plants or insects affect outdoor workers?

Contact may cause physical injury, allergy, toxicity or infection. Species, location and route matter. See Zoonoses and Introduction to biological hazards at work.

Forestry, utility or grounds crews encounter biting insects, animal contamination or harmful vegetation at a new site. Cutting, touching and hand-to-mouth transfer create different routes; a bite can also lead to injury or agent-specific infection. Seasonal and location changes can invalidate a previous plan.

Which source controls and checks change the outcome?

Avoid disturbance or choose a controlled route and method, obtaining competent identification and exposure advice where needed. Managers provide suitable tools, separation, hygiene and task-specific response arrangements. Workers should recognise the limits of their identification skills and report unexpected contact. Stop an uncontrolled disturbance or uncertain exposure and obtain help; selected clothing, gloves or repellents supplement the method and do not establish that every plant or animal risk is controlled.

How should the controls be applied?

Avoid unnecessary contact and plan local methods, hygiene and response with specialist advice where warranted.

When should work stop or be escalated?

Hold the affected activity if a critical safeguard is missing, fails its check or no longer matches the assessed conditions. Separate the mechanisms and use clinical referral for individual symptoms rather than diagnosis.

How do occupational noise and neighbour disturbance need different assessments?

Neighbour effects differ from worker hearing exposure, involving receptors, timing and separate routes. See GOV UK Noise nuisances how councils deal with complaints and Noise at work: A brief guide to controlling the risks.

An outdoor plant installation or event can expose workers to harmful noise while disturbing neighbouring residents. Occupational exposure and environmental nuisance involve different people, evidence and authority routes. A hearing-protection decision for employees does not resolve off-site impact.

Which source controls and checks change the outcome?

Avoid unnecessary noisy work and select quieter equipment, then use suitable enclosure, location and acoustic design. Competent assessments check worker exposure and the relevant local nuisance requirements separately. Managers plan timing and communicate changes, monitoring complaints and operating conditions. Stop or alter work where the applicable control arrangement is lost; do not convert an occupational action value into permission to emit noise at a neighbouring property.

How should the controls be applied?

Reduce source noise and seek relevant local authority or regulator advice while assessing workers separately.

When should work stop or be escalated?

Hold the affected activity if a critical safeguard is missing, fails its check or no longer matches the assessed conditions. Health and Safety Executive (HSE) occupational guidance cannot establish nuisance compliance; England guidance needs jurisdiction checks elsewhere.

How should earthquakes, tsunami, volcanic activity or sandstorms be assessed?

These examples apply to particular destinations or unusual disruption; exposure, evacuation and communications may combine. See Foreign travel advice.

An overseas project may face earthquakes, tsunami, volcanic ash or sandstorms not typical of a UK site. Location, infrastructure, warnings, transport and time to reach shelter change exposure. A UK hazard label cannot establish the destination's current risk or response requirements.

Which source controls and checks change the outcome?

Avoid a high-risk location or period where practicable and use current destination-specific official advice with competent local planning. The employer verifies communications, safe accommodation, evacuation or shelter and support for affected people. Monitor official local conditions and changes during the assignment. Stop travel or work when the agreed safe arrangement cannot be maintained; do not invent warning thresholds or assume UK emergency access and legal duties apply unchanged overseas.

How should the controls be applied?

Use current destination advice and competent local planning for assignments and continuity.

When should work stop or be escalated?

Hold the affected activity if a critical safeguard is missing, fails its check or no longer matches the assessed conditions. Do not use UK general guidance as an overseas disaster-response method; live local advice is essential.

How should this hazard group be assessed and managed in practice?

For outdoor maintenance, review weather forecasts, exposure duration, shade, shelter, access routes, flood susceptibility and safe stop work triggers. Include supply chain disruption and overseas travel when relevant. Adapt timing and work methods, provide shelter and appropriate protection, and define escalation and shutdown responsibilities. Maintain flood and continuity plans and use the relevant nation's warning services. Weather review and briefing records; heat and cold assessment; outdoor work plan; flood trigger checklist; emergency contacts; continuity exercises and destination assessments for overseas work. Follow the assessment through procurement, implementation, briefing, supervision and verification rather than stopping at a document. See Keep your top on and Noise at work: A brief guide to controlling the risks.

Agree the activity, affected people and prerequisites with operations, workers and any contractor before work. Test whether the task can be removed or redesigned, then verify selected controls in the place they will operate. During work, the supervisor compares conditions with the assessed method and has authority to stop. Completion includes safe waste or equipment handling, outstanding defects and a named hand-back decision; a completed risk form is not the end of the control process.

What must be established before assigning a risk score?

Identify the actual activity, foreseeable harm, people exposed and controls already demonstrated to work. Consider start up, normal operation, cleaning, maintenance, breakdown, emergency response and simultaneous work. A numerical matrix may support prioritisation but cannot establish compliance or replace a specialist assessment. Do not assign a residual risk score merely because a proposed control has been written into a form. Keep unknowns explicit and obtain site evidence before deciding that work can proceed. See Managing risks and risk assessment at work and Managing for health and safety (HSG65).

Write a short causal description: the work creates or releases something, a person is exposed by a particular route, and a specified injury or ill-health outcome is foreseeable. Establish whether existing measures work in the actual task before estimating likelihood. An unknown material, unverified safe state or absent critical control is a decision gap, not a reason to select a reassuring number. The responsible manager records what must be resolved and who can authorise the next step.

Who owns each control and how should it be verified?

The dutyholder provides resources and arrangements. The operational manager assigns each control to someone able to implement it. Supervisors verify the controls at the point of work and respond to defects. Workers and representatives explain work as done and report problems. Specialist advisers address limits of local competence. Record the control, responsible role, evidence, check method, due date and escalation route. Completion of a training course or signature alone does not demonstrate effective risk control. See Managing for health and safety (HSG65).

Separate the person who funds and owns the control from the person who performs its check. For an engineered measure, record the accepted performance or condition, who verifies it, what a failed result means and how maintenance is coordinated. For a staffing or organisational measure, check actual cover, authority and staff experience. A signature confirms a recorded action, not effectiveness. The supervisor must be able to hold work and obtain a competent remedy when the required condition is not met.

Who might be affected, including people outside the work team?

Include employees, agency workers, apprentices, contractors, cleaners, maintainers, delivery drivers, service users, visitors and nearby public. Consider inexperience, pregnancy, disability, health conditions, language needs and lone work individually and without stereotyping. Consultation should identify barriers to controls rather than collect unnecessary medical details. Share relevant interface information between employers. A single activity may require several hazard groups; avoid splitting the assessment so that interacting controls have no clear owner. See Managing risks and risk assessment at work and Managing for health and safety (HSG65).

Walk through the job from the perspective of someone who has not received the operator briefing: a cleaner, visiting driver, contractor, new starter or occupant of an adjoining area. Ask whether a control protects them during arrival, normal work, waste removal and emergencies. Agree who controls each shared boundary and how changes are communicated. Individual needs influence a suitable arrangement but do not justify treating an employee, disability or health condition as the hazard.

When should the assessment be reviewed and what evidence matters?

Reassess when equipment, materials, staffing, layout, working hours or environmental conditions change; after incidents, near misses, complaints, symptoms or evidence of failed controls; and through planned risk based review. Verify improvements under realistic demand, not only during an announced inspection. Retain dated observations, measurements where relevant, maintenance records and action closure evidence. No single review interval suits every risk. Health surveillance, exposure monitoring and clinical diagnosis are different activities and require their own competent arrangements. See Managing risks and risk assessment at work and Managing for health and safety (HSG65).

Use a change or failure to test the original assumptions, not merely change the date on the form. A different product, higher throughput, altered route, new shift or contractor may change the harm pathway. Keep observations, applicable measurements, defects and authorisation evidence linked to the task. After correction, verify under representative demand and with affected workers. Repeated workarounds or symptoms require investigation of the design and organisation, even when no injury has been recorded.

How could environmental hazards arise in construction and civil engineering?

In construction and civil engineering, outdoor construction lifts in changing weather. Define suspension and competent limits. Forecast and equipment evidence. This is an illustrative application, not a documented case or a complete method statement. See UK weather warnings and Working at height.

Wind or rain can destabilise a lift, reduce footing or compromise the planned work area.

The lifting coordinator compares observed conditions with competent equipment and task limits. Reaching the agreed suspension trigger or losing safe access stops the operation; a general forecast cannot invent the equipment threshold.

How could environmental hazards arise in manufacturing and engineering?

In manufacturing and engineering, manufacturing floodwater reaches power assets. Restrict recovery pending assessment. Flood and electrical checks. This is an illustrative application, not a documented case or a complete method statement. See Business flood plan checklists and Electricity at work: Safe working practices.

Floodwater can bring people or equipment into contact with live electricity, damage electrical systems and contaminate assets and hide damage beneath apparently intact equipment.

The asset owner prevents uncontrolled entry and obtains competent electrical, structural and contamination assessment. Do not restart merely because the water has receded; retain verified recovery and release decisions.

How could environmental hazards arise in warehousing and logistics?

In warehousing and logistics, logistics loses access in heavy rain. Plan safe routing and continuity. Forecast and route decisions. This is an illustrative application, not a documented case or a complete method statement. See UK weather warnings.

Heavy rain can hide surface defects, strand vehicles or defeat access and emergency routes.

The logistics coordinator verifies usable alternatives and communicates restrictions to drivers. An uncertain flooded route is not traversed to test its safety; reassess delivery timing and continuity through the agreed plan.

How could environmental hazards arise in agriculture and forestry?

In agriculture and forestry, farms work in heat near vegetation. Plan thermal and local contact controls. Task briefing. This is an illustrative application, not a documented case or a complete method statement. See Temperature and Zoonoses.

Heat, workload and clothing can combine with vegetation or animal-contact exposures during outdoor work.

The farm manager assesses the actual task, recovery, shelter and hygiene rather than one air-temperature value. Suspected illness or loss of required controls stops affected work and uses the timely professional response.

How could environmental hazards arise in healthcare and social care?

In healthcare and social care, care visits continue during floods. Avoid unsafe access and plan continuity. Escalation records. This is an illustrative application, not a documented case or a complete method statement. See Business flood plan checklists.

A flooded access route can expose visiting staff and residents to moving water, contamination or delayed assistance.

The care coordinator plans alternative delivery and escalation with the service. Unsafe or uncertain access changes the visit plan; do not direct staff through floodwater to preserve the appointment time.

How could environmental hazards arise in hospitality and food production?

In hospitality and food production, hospitality works in hot humid kitchens. Review ventilation patterns and recovery. Thermal assessment. This is an illustrative application, not a documented case or a complete method statement. See Temperature.

Humid heat and appliance output can make a kitchen task harder to sustain and contribute to heat illness.

The manager assesses workload, ventilation, clothing and genuine recovery during a representative service. Symptoms or failed critical ventilation require the appropriate task change and response, not an instruction to drink water and continue regardless.

How could environmental hazards arise in retail and public services?

In retail and public services, retail deliveries use icy routes. Adapt timing and maintain access. Route observations. This is an illustrative application, not a documented case or a complete method statement. See UK weather warnings and Preventing slips and trips at work.

Ice on delivery or customer routes can cause a fall or loss of vehicle control.

The premises owner changes timing or routes and verifies surface treatment under actual conditions. Unsafe access or failed treatment restricts use until checked; a completed gritting record is not proof of present grip.

How could environmental hazards arise in offices and professional services?

In offices and professional services, offices face ambient smoke events. Use forecasts with competent building advice. Forecast and facilities review. This is an illustrative application, not a documented case or a complete method statement. See GOV UK Using the Daily Air Quality Index.

Outdoor smoke can enter a building and affect workers even when the source is not on the premises.

Facilities staff combine official air-quality information with competent building and task advice. If the agreed protective arrangements cannot operate, change occupancy or work through the site plan; do not improvise a ventilation setting from an index alone.

How could environmental hazards arise in education and laboratories?

In education and laboratories, education undertakes outdoor work. Plan timing shade and protection. Outdoor controls. This is an illustrative application, not a documented case or a complete method statement. See Keep your top on.

Outdoor teaching can expose learners and staff to sun, heat or changing weather without reliable shelter.

The organiser adapts timing, shade, work and suitable protection for the actual group. Missing shelter, unsafe conditions or signs of illness activate the planned change or response; record the decision and supervision arrangements.

How could environmental hazards arise in utilities and waste management?

In utilities and waste management, waste operations create neighbourhood noise. Separate occupational and nuisance assessment. Noise and authority advice. This is an illustrative application, not a documented case or a complete method statement. See GOV UK Noise nuisances how councils deal with complaints and Noise at work: A brief guide to controlling the risks.

Plant noise can harm workers and separately disturb nearby residents; the two assessments have different purposes.

The operator examines source reduction and representative workplace exposure, then follows the relevant local authority nuisance route. A complaint is not a worker dose measurement, and hearing protection cannot resolve off-site nuisance.

How could environmental hazards arise in energy and process industries?

In energy and process industries, energy teams work in seismic regions abroad. Use local competent and destination planning. Current assignment advice. This is an illustrative application, not a documented case or a complete method statement. See Foreign travel advice.

Seismic or other local natural hazards can affect structure, escape and access on an overseas assignment.

The employer obtains current destination-specific official advice, competent local design information and a practical response plan. Missing local assurance or changed warnings require an assignment decision; UK workplace guidance cannot establish foreign technical limits.

How could environmental hazards arise in events and transport operations?

In events and transport operations, events use temporary outdoor structures. Coordinate weather shelter and closure. Condition and emergency checks. This is an illustrative application, not a documented case or a complete method statement. See UK weather warnings.

Wind, lightning or surface flooding can compromise temporary structures and a crowd closure route.

The organiser assigns monitoring and stop authority with competent structure-specific triggers. Damage, trigger breach or loss of safe shelter pauses admission or closes the activity through the plan; reopening requires recorded competent condition checks.

How do you put the controls into practice?

Move from recognising harm to deciding, implementing, checking and improving the controls. Give each critical control an owner, a check method and a clear escalation route. See Managing risks and risk assessment at work and Managing for health and safety (HSG65).

From work activity to verified control
  1. Understand the taskObserve people, equipment, materials and interfaces.
  2. Describe the harmIdentify exposure, energy release and foreseeable failure.
  3. Control at sourceAvoid, redesign, substitute, contain or separate the hazard.
  4. Check in real workVerify performance, defects, ownership and change triggers.
StageActionWho actsEvidence to retain
Before workConfirm the actual task, people, equipment, substances, location and abnormal conditions.Operational manager with competent adviceAssessment, observations, consultation and required specialist checks
Control deliveryAdapt timing and work methods, provide shelter and appropriate protection, and define escalation and shutdown responsibilities. Maintain flood and continuity plans and use the relevant nation's warning services.Responsible manager and authorised implementersWeather review and briefing records; heat and cold assessment; outdoor work plan; flood trigger checklist; emergency contacts; continuity exercises and destination assessments for overseas work.
During workSupervise the real activity; check that critical controls remain effective and workers can report problems.Supervisor and workersChecks, defects, changes and escalations
Stop and restartStop the affected activity when serious danger or a failed critical control is suspected. Restart only through the competent site authorisation arrangements.Supervisor and authorised competent personReason for stopping, corrective action, verification and restart authority
ReviewRevisit controls after change, incidents, near misses, symptoms or repeated defects. Check effectiveness rather than counting completed forms.Manager, Occupational safety and health (OSH) adviser and worker representativesDated review, closure evidence and lessons for design and procurement

How does ERICPD apply to environmental hazards?

ERICPD stands for Eliminate, Reduce, Isolate, Control, PPE and Discipline. For environmental hazards, start by removing the hazardous task or source where practicable, then reduce and separate the remaining exposure. Combine suitable safeguards and work arrangements, use relevant personal protective equipment for residual risks, and keep all selected measures effective in everyday work. See HSE: Managing risk using PPE and Managing for health and safety (HSG65).

ERICPD: six decisions for selecting and sustaining controls
  1. 1 · E Eliminate

    Remove the hazardous task or source where practicable; confirm that the alternative still fulfils the task and assess remaining hazards.

  2. 2 · R Reduce

    Use a suitable less hazardous material, process or equipment, or reduce the hazard at source. Check any new risks introduced.

  3. 3 · I Isolate

    Separate people from the hazard through suitable containment, guarding, barriers or other task-specific separation.

  4. 4 · C Control

    Put remaining safeguards and workable task arrangements in place. Engineering controls and administrative arrangements have different strengths.

  5. 5 · P PPE

    Select personal protective equipment for relevant residual exposure. Check suitability, fit, compatibility, use and maintenance.

  6. 6 · D Discipline

    Sustain the controls through management support, supervision, maintenance and learning. Resolve workarounds and failures without blaming workers.

Eliminate, Reduce and Isolate focus attention on the hazard and the exposure pathway before reliance on behaviour or PPE. Controls usually work together: an enclosure may still need safe access, maintenance and instruction. Record the reasons for choosing or rejecting stronger options and check the complete task, including cleaning, maintenance and foreseeable changes.

ERICPD is a practical learning mnemonic. The five-level hierarchy is elimination, substitution, engineering controls, administrative controls and PPE. Reduce may include substitution or source reduction; Isolate commonly involves engineering. Control can include engineering and administrative measures. Discipline supports every selected level and is not an additional protective barrier. These frameworks are related; their labels do not form identical statutory ladders.

What does each role need to know and demonstrate?

People need learning and demonstrated competence for the decisions they actually make, not the same course at every organisational level. See Keep your top on and Noise at work: A brief guide to controlling the risks.

For environmental hazards, frontline learning must enable staff to recognise changing weather, access and exposure conditions. Supervisors need to apply agreed stop triggers and verify a safe closure route. Design, procurement and specialist assessment require deeper competence in location-specific design, continuity and competent reopening. Awareness, supervised practice, assessment and authorisation are different stages; an attendance record alone does not establish competence or permit specialist intervention.

Assess practical understanding with the actual task and credible abnormal conditions. The assessor must be competent for the scope being tested; authorisation should state its boundaries. Reassess after a material change, a defect, a demonstrated gap or work outside that scope rather than assuming one fixed refresher interval suits every role.

RoleLearning and decisionsAssessment, evidence and reassessment
Nearby staff and new startersRecognise the relevant exposure, usable routes, warning signs and reporting or emergency arrangements.Supervisor checks a practical explanation and scenario response; retain briefing scope and gaps. Repeat when routes or conditions change.
Frontline usersDemonstrate how to recognise changing weather, access and exposure conditions, including the checks, limits and stop decision.Competent task assessor observes representative practice and a defect scenario; record task, equipment/material scope and authorisation. Reassess for changed methods or performance gaps.
Specialist workers and maintainersDemonstrate the applicable technical method, safe state, interface controls and hand-back; do not infer specialist skill from general awareness.Competent specialist assesses work within a defined scope; retain method, assessment and authorisation evidence. New equipment, material or fault type may need a new decision.
Supervisors and coordinatorsDemonstrate how to apply agreed stop triggers and verify a safe closure route, manage a changed condition and hold or release work.Manager or competent reviewer tests a realistic planning and stop/restart scenario; retain observed decisions and corrective actions. Review following interface failures.
Managers, purchasers and designersMake and resource decisions on location-specific design, continuity and competent reopening, including the stronger-control options and residual risks.Competent review of specifications, trials, procurement acceptance and effectiveness evidence; record decision owner and outstanding actions. Reassess after process or organisational change.
OSH advisers, technical specialists and auditorsDistinguish jurisdiction and source limits, test representative evidence and recognise the boundary of their competence.Appropriately competent review of the actual assessment, sources, sampling and closed actions; retain scope and limitations. Escalate missing technical information rather than inventing a conclusion.

How can the hierarchy of controls reduce risks from harmful workplace environmental conditions?

A grounds team performs strenuous work outdoors in direct sun. Heat, humidity, physical effort and clothing can contribute to heat illness, while sunlight creates a separate skin-exposure risk. Assess the location, task and individual needs without adopting a universal temperature cut-off.

Illustrative SHARE example: assess stronger options first, then combine the measures needed for the remaining task. If elimination removes the task entirely, later measures address only remaining or different hazards. Each stage below explains what changes, how harm is reduced and who verifies it.

Applying ERICPD to other hazards in this group

For wind, rain, cold and flooding, avoid exposure where possible, provide suitable shelter and use competent activity-specific stop and recovery decisions. A forecast supports planning; it does not determine every equipment limit or prove that a damaged or flooded site is safe to reopen.

Keep an assessment record of the chosen controls, reasons for the selection, action owner, verification evidence and failure response. A failed critical control requires the affected activity to be held and corrected through the competent site arrangements; PPE or a completed form does not override that decision.

Guidance supporting these teaching examples

How should a flooded workshop be returned to use?

Manage this activity by preventing exposure at source, coordinating the affected people and verifying the planned controls before release. Floodwater enters a workshop and recedes before staff arrive. Electricity, concealed debris, contamination, structure and awkward clean-up tasks can all threaten employees and recovery contractors. The business reopening deadline does not establish that the building is safe. See Business flood plan checklists and Electricity at work: Safe working practices.

Illustrative SHARE workplace example

What must be agreed before work starts?

The premises manager restricts access and coordinates competent assessment of structure, services, contamination and the recovery method. Avoid exposing staff by arranging safe alternative operations where feasible. Electrical investigation and any reconnection stay with authorised competent people. Plan controlled waste handling, cleaning, equipment and access for the actual contamination, with no assumption that clear-looking water is clean.

What changes, stops or hand-back decisions matter?

Unknown utility status, unstable surfaces or unexpected contamination stops the affected activity. Supervisors maintain controlled access and coordinate contractors so recovery work does not introduce new risks. Reopening follows documented condition checks and competent release, including relevant equipment and escape arrangements. Keep decisions and outstanding actions visible to the responsible manager; do not treat an ended flood warning as a certificate for the site.

How should jurisdiction, local rules and management assurance be handled?

Apply the law and regulator guidance for the work location, then use competent task and equipment information to establish the practical arrangements. See Managing risks and risk assessment at work and Managing for health and safety (HSG65).

HSE guidance generally addresses Great Britain; Northern Ireland has its own instruments and Health and Safety Executive for Northern Ireland (HSENI) route. Construction, dangerous substances, equipment and other specialist topics need the applicable instrument, not a Great Britain (GB) duty copied into a Northern Ireland (NI) answer. Fire arrangements also differ across the UK nations. Foreign project examples require destination-specific official advice and competent local assessment.

Distinguish a legal duty, regulator guidance, an organisation's rule and an illustrative SHARE method. A management system can link assessment, procurement, competence, maintenance, consultation and corrective action; a certification label or an unverified standard clause does not authorise work. For this group, sample evidence on location-specific design, continuity and competent reopening and compare the recorded method with the activity observed on site. Resolve conflicts or missing technical information with the responsible competent person.

How would managing an outdoor event as weather deteriorates work in practice?

An outdoor event combines temporary structures, staff, visitors and changing weather. Wind, lightning, heat, rain and surface conditions can alter risk and emergency access. The organiser first considers location, timing and design choices that reduce exposure, including suitable shelter and a safe closure route. See UK weather warnings and Temperature.

Illustrative SHARE workplace example

What is required before and during the activity?

Before opening, competent people set activity- and structure-specific triggers using design information, local conditions and official forecasts. Assign who monitors conditions and who can stop or close the event. During operation, compare observed conditions with the agreed triggers; a general warning colour alone does not determine whether a particular structure or activity is safe.

What does safe completion and hand-back require?

Stop and move people through the agreed emergency arrangements when required, without directing untrained staff into a dangerous intervention. Reopen only after the competent condition checks and authorisation. Keep weather observations, decisions, communications and recovery evidence. A worksite flood or overseas natural hazard needs its own location-specific plan.

Acronyms and terms

These terms distinguish the source of harm, the exposure route and the controls needed for the actual work.

Letters or termExpansion or definitionMeaning in this topic
DAQIDaily Air Quality IndexOfficial information about outdoor air pollution; not a substitute for task-specific occupational exposure assessment.
UKUnited KingdomA geographical description, not one identical set of health-and-safety instruments.
GBGreat BritainEngland, Scotland and Wales; HSE guidance is generally framed for this jurisdiction.
NINorthern IrelandA separate health-and-safety legal route overseen by HSENI.
HSEHealth and Safety ExecutiveThe GB regulator and a publisher of official workplace guidance.
HSENIHealth and Safety Executive for Northern IrelandThe NI regulator; check its applicable requirements and advice.
OSHOccupational safety and healthPreventing work-related injury and ill health.
PPEPersonal protective equipmentEquipment worn for remaining exposure; it does not replace stronger source controls.
Local exhaust ventilation (LEV)Local exhaust ventilationEngineered capture of airborne contaminant near its source.
COSHHControl of Substances Hazardous to HealthThe GB hazardous-substance assessment and exposure-control route.
ERICPDEliminate, Reduce, Isolate, Control, PPE, DisciplineA learning mnemonic for selecting and sustaining controls; not a statutory ladder.
HazardA source or condition with potential for harmDescribe what creates harm, rather than calling a person the hazard.
ExposureA route or contact connecting source and personConsider dose, duration and circumstances where relevant.
Critical controlA measure essential to the safe arrangementDefine its required condition, check, owner and failure response.
Hand-backControlled return to operation or useConfirm people, equipment, protection and outstanding conditions before release.

Example handy documents

Useful records connect the actual task to control ownership, checks, stop decisions and verified hand-back. See Managing risks and risk assessment at work and Managing for health and safety (HSG65).

The following are examples of documents an organisation could create or adapt, not downloadable files or a complete safe system. Use the task-specific information and competent review before applying them. Keep private health information outside general operational records.

What should a task and harm-route assessment contain?

Record people, source, exposure or energy, foreseeable harm, existing controls, stronger options, residual uncertainty and the responsible decision owner.

What should a critical-control check and defect log contain?

Record the required condition, check method, responsible person, failed result, restricted work and verified corrective action.

What should a change and hand-back record contain?

Capture changed material, equipment, staffing, layout or conditions; prerequisites, hold decisions, competent verification and restart authority.

What should a competence and authorisation record contain?

Name the assessed task and scope, practical evidence, assessor, limits, supervision and reassessment triggers.

What should an operational learning review contain?

Link observations, complaints, near misses or relevant exposure evidence to a design or organisational change and an effectiveness check.

Documents to download

Download editable resources from the SHAREhub environment to support your work. Working forms and spreadsheet input areas are blank. Reports, plans, guides, briefings, procedures and policies contain completed worked example content to adapt.

Return to SHARE home