SHARE Knowledge Hub

NEBOSH HSE Certificate in Process Safety Management

Learn to recognise how process incidents develop and how a site can check the barriers that prevent or limit a major release.

PSM1Updated

Understanding NEBOSH HSE Certificate in Process Safety Management

Learn to recognise how process incidents develop and how a site can check the barriers that prevent or limit a major release.

Why this matters at work

Identify the exact substance or mixture, quantity, physical form and conditions, including pressure and temperature. Consider health hazards, fire, explosion, oxidation, reactivity, corrosion and decomposition products. Use current reliable product data and competent advice for gaps, while assessing process-generated hazards that a supplied label may not describe. A pictogram identifies a hazard class, not the likelihood or consequence of the actual task. Trace how a release, contact or reaction could harm people and select prevention, containment, separation, ventilation, ignition control and suitable recovery measures. Assess normal use, cleaning, waste, maintenance and foreseeable failure. Keep COSHH health risks, DSEAR safety risks and other relevant regimes connected without assuming one assessment covers every duty. GB and NI chemical and workplace rules differ. This answer provides a method, not a chemical classification, universal safe quantity or approval for a storage layout.

Assess two linked consequence paths. An electrical event may injure the person at the panel through shock, arc or burns. It may also ignite a release, remove control power, disable detection or defeat a shutdown function, leading to loss of containment and wider harm. Identify hazardous inventories, utilities, normal and abnormal operating modes and affected neighbours as well as the immediate maintenance task. Neither a personal electrical assessment nor a process diagram alone captures both paths. Link the electrical safe system with process hazard analysis, hazardous-area information, control of work and emergency arrangements. Describe the intended safe state on loss of power and the evidence that it is achieved. Prioritise prevention, suitable design, physical protection and verified safety functions; warnings and PPE cannot compensate for an unreliable shutdown. Record assumptions, interfaces, action owners and change triggers. When the plant, inventory or power arrangement changes, review the effect on the whole scenario rather than treating the modification as an isolated electrical purchase.

How organisations manage this in practice

Contracted work can affect containment, ignition control, protective systems and emergency capability, including through defects discovered only after the contractor leaves. Define the major-accident scenario and barrier affected by each task. Retain enough operator expertise to understand and challenge the work, even where a specialist supplies the technical service. A commercial specification or approved-contractor list cannot replace that intelligent-customer capability. Agree the process state, task boundary, technical standards, competent roles, supervision, permits, isolations and handback evidence before work. Include lower tiers and work performed off site, such as design or fabrication. Manage substitutions and method changes through appropriate review. Monitor actual performance and verify the barrier before accepting return to service. GB COMAH and other hazard duties apply only where their conditions are met; NI has separate instruments. The operator and contractor each retain their applicable duties.

Operators, maintainers and contractors see how equipment and procedures behave in real work, including awkward access, recurring faults, bypasses and competing demands. Their knowledge can reveal weakening barriers before an accident. Involve them in identifying credible scenarios, designing practical controls and checking whether arrangements work. Formal consultation with employees or representatives has its own legal requirements; broader participation supports it but should not be used to replace the appropriate representative route. Provide relevant information, time, accessible communication and feedback on concerns. Keep the operator's and employer's responsibilities clear: worker involvement does not transfer the duty to fund, design or authorise safe operation. Record issues, decisions, owners and verification. Include nights, temporary staff and contractors so the process reflects the whole operation. A workshop attendance list or a suggestion box does not show influence. The practical test is whether concerns change decisions and whether workers can challenge a deteriorating control without pressure to keep production moving.

The permit records what is authorised within defined conditions. Protection depends on whether isolations, plant status, interfaces and competence have actually been verified. A shift change or adjacent job can invalidate the assumptions. Agree who must suspend the job, how the condition is made safe and what evidence is needed for handback.

Who is the Process Safety Management certificate for?

This qualification suits operations managers, supervisors, safety representatives and advisers in process industries such as chemicals, refining, plastics and pharmaceuticals. It suits people who need to recognise threats to containment and question how the plant is being managed.

Unit
PSM1
Framework
SCQF 7 · comparable to RQF 4
Learning time
28 taught + 20 private-study hours
Assessment sitting
40 questions · 90 minutes · closed book
Practical access
No workplace portfolio is assessed

Learning hours are planning figures. Assessment effort and submission windows are different. Confirm your Learning Partner’s timetable.

Closed pipework and vessels at a UK chemical processing plant.
Qualification level

SCQF Level 7 with five Scottish credits, comparable to RQF Level 4. NEBOSH describes this as a credit-rated qualification. The credit rating and UK regulatory accreditation are distinct.

What you can do with it

Learn to ask what prevents a dangerous release, who maintains each safeguard and what evidence shows that it works. A shift supervisor can use this reasoning to challenge a proposed restart after maintenance and find the person authorised to decide.

How do you turn qualification knowledge into workplace competence?

You build competence by applying what you learn to real tasks under suitable supervision and checking the results. Passing a NEBOSH qualification shows that you have met its assessment requirements. Workplace competence also takes practical skills, relevant experience and behaviours such as listening to workers, speaking up about risk and checking that a change protects people. Practise with an experienced colleague, ask for feedback and seek specialist help when a decision goes beyond your experience.

At the storage terminal, ask the operator which safeguard is unavailable and who is authorised to decide whether a transfer can proceed. Work through the handover with an experienced operator. Refer the technical decision to the responsible engineer and ask to see the evidence that the safeguard has been restored.

Use this learning to ask better questions about process hazards and the barriers that prevent major incidents. Plant design, hazardous-area classification, relief-system sizing, protective-system validation and operating authorisation require appropriate specialist competence and site authority.

Follow the worked example · HSE guidance on competence

What are the entry requirements?

NEBOSH sets no formal entry qualification. It recommends a foundation in health and safety, such as General Certificate learning, and English equivalent to IELTS 6.0 or above. The award develops process safety management knowledge. Specialist plant design and engineering authorisation are separate responsibilities.

Choosing a study route

Study through an accredited Learning Partner in a taught block, on part-time release, or through supported distance or eLearning. Allow about 28 taught hours and 20 hours of private study, plus the assessment. Pair technical reading with examples of barriers, maintenance and change control from your industry.

Taught block

Useful when you can step away from normal work for concentrated learning. Protect time for preparation, private study and assessment outside classroom sessions.

Day release or evening study

Useful when you want to apply a topic between sessions. Agree reliable release time and avoid allowing routine work to displace every study period.

Supported online or distance learning

Useful for location or shift flexibility. Check tutor response times, access duration, live sessions, practice feedback and the technology needed.

Blended learning

Useful when you want independent study alongside scheduled discussion. Check which sessions are compulsory and how the provider supports workplace activities.

How is the Process Safety Management certificate assessed?

PSM1 is one timed online multiple-choice assessment. Arrange the sitting through your accredited Learning Partner.

PSM1 · Prepare for the online assessment

Your Learning Partner registers you for the sitting. Check the NEBOSH platform and the candidate instructions in advance. Work through short examples by identifying the process hazard, the barrier being relied on and the consequence if it fails.

PSM1 · Complete the timed questions

Answer 40 compulsory multiple-choice questions in one 90-minute, closed-book sitting. Ten questions use an extended scenario. Each question has one correct answer and carries one mark. The assessment window and the 90-minute timer serve different purposes. There is no workplace portfolio for this unit.

Passing and grading

The award is graded pass or refer. A score of at least 60% means 24 correct answers out of 40. NEBOSH normally issues the result within 15 working days. It developed this qualification with Great Britain’s Health and Safety Executive.

How can you prepare for each stage of the assessment?

Start with the instructions for your registered unit, then practise connecting evidence to a reasoned decision. The steps below explain an approach to preparation and common mistakes to recognise.

  1. Map a process incident during study

    Identify what is contained, the hazardous energy or substance, how containment could fail and who or what could be affected. Compare normal operation with start-up, shutdown and maintenance.

    Common mistake Using a good personal-injury record as proof that major accident hazards are controlled.

  2. Distinguish the barriers

    For each study scenario, identify prevention, detection, control and mitigation. Ask what each barrier relies on and whether a common failure could defeat several at once.

    Common mistake Counting alarms or procedures as independent protection without examining their dependencies.

  3. Practise management decisions

    Work through how changes, contractors, handovers and overdue maintenance affect protection. Explain the action that restores control and who has authority to decide.

    Common mistake Treating a permit or completed form as proof that the plant is safe.

  4. Prepare for the closed-book sitting

    Confirm platform access, identity requirements, permitted equipment and the scheduled assessment window. Practise question pacing before the actual assessment.

    Common mistake Assuming open-book rules from another NEBOSH qualification apply to PSM1.

  5. Use the 90-minute period carefully

    Read the full question, identify the decisive facts and select the best answer. Follow the supplied rules for navigation, review and submission.

    Common mistake Selecting an option because it contains a familiar technical phrase rather than because it answers the question.

Check the official assessment guidance

Which elements and assessment criteria does the Process Safety Management certificate cover?

PSM1 covers four elements linking leadership, process risk, engineering safeguards and emergency response.

The references follow the numbered topics in the four PSM1 elements. The Learning Partner guide maps these topics to learning outcomes and assessment criteria for the multiple-choice assessment.

Read the official NEBOSH syllabus

Element 1 · Leadership, learning and management of change

PSM1

A plant can record fewer slips while its critical barriers deteriorate. Ask which loss-of-containment scenarios matter, what prevents escalation, who owns those barriers and what evidence shows they remain available. Compare overdue repairs, impaired protection and changes awaiting review with what operating teams experience at handover.

Workplace example

Two terminals report no lost-time injuries; one also reports repeated loss of containment. Ask the leadership team to investigate the release history and agree who can authorise repairs. At the next review, look for evidence that the same failure has stopped recurring.

Syllabus topic 1.1 · PSM1

1.1 · Recognising process safety

Assessment criterion. Define process safety and its management system, then distinguish a major process hazard from a personal injury hazard.

Compare a slip injury with a release of hazardous material. Identify the plant, people and management decisions that prevent a single failure escalating into a major event.

Practise applying it. Which events count as loss of containment even when nobody is injured?

Related reading · Process Safety Versus Personal Safety

Syllabus topic 1.2 · PSM1

1.2 · Leading major-hazard prevention

Assessment criterion. Explain how leaders allocate authority and resources and how their decisions affect the way the workforce manages major hazards.

Ask leaders to identify the highest-consequence scenarios, the safeguards they rely on and the evidence reviewed before committing people or money.

Practise applying it. Who can resource a repair and who can stop a transfer?

Related reading · Process Safety Leadership and Visible Commitment

Syllabus topic 1.3 · PSM1

1.3 · Learning across shifts and sites

Assessment criterion. Explain how investigation findings, lessons from other sites, benchmarks and reliable technical information can inform decisions.

Follow a near miss from initial reporting to a change in operating practice. Check that similar assets and contractors received and understood the learning.

Practise applying it. How would you check another site’s incident finding against your own plant?

Related reading · Organisational Learning from Incidents and Near Misses

Syllabus topic 1.4 · PSM1

1.4 · Controlling modifications

Assessment criterion. Identify how proposed and temporary changes are assessed, authorised, communicated and checked.

Identify changes to equipment, chemicals, people or procedures that could invalidate a safeguard. Require review, authorisation, communication and a verified handover.

Practise applying it. Who must review a temporary modification before continued operation?

Related reading · Management of change in process safety

See it in practice Chemical manufacture · Review a change to a reaction

Syllabus topic 1.5 · PSM1

1.5 · Using workers’ knowledge

Assessment criterion. Weigh the benefits and limitations of consultation and distinguish the roles of representatives, committees and operating teams.

Invite operators and maintainers to explain abnormal conditions and workarounds. Show how their evidence changes a risk review or design decision.

Practise applying it. What would a night operator or contractor know that the design team might miss?

Related reading · Worker Engagement in Major Accident Prevention

Syllabus topic 1.6 · PSM1

1.6 · Competence for critical roles

Assessment criterion. Explain what competence means for a safety-critical role and how training, development and assessment support it.

Define what a person must be able to recognise, decide and do when conditions change. Verify this through observation or safe simulation and review refresher needs.

Practise applying it. What observation would show a person can respond to an abnormal condition?

Related reading · How should competence be managed for process safety critical roles?

Element 2 · Recognising and managing process risk

PSM1

The permit records what is authorised within defined conditions. Protection depends on whether isolations, plant status, interfaces and competence have actually been verified. A shift change or adjacent job can invalidate the assumptions. Agree who must suspend the job, how the condition is made safe and what evidence is needed for handback.

Workplace example

A shift log records a safeguard as unavailable, but the incoming contractor has already been issued a permit. Reconcile the permit, impairment record and handover with the area authority. Identify the person authorised to decide whether work can proceed.

Syllabus topic 2.1 · PSM1

2.1 · Building a process safety system

Assessment criterion. Identify the purpose and core parts of a process safety management system and how they operate together.

Start with major hazards, accountable roles and control standards. Use inspections, audit and management review to show whether those standards are delivered across the plant.

Practise applying it. How do design information, operating procedures and assurance work together?

Related reading · Establishing a process safety management system

Syllabus topic 2.2 · PSM1

2.2 · Selecting process risk techniques

Assessment criterion. Explain the principles of assessing risk and identify suitable techniques for different process decisions.

Choose an assessment method for the question, design stage and potential consequence. Describe assumptions, independent safeguards and how the team will close recommendations.

Practise applying it. Which hazard review would expose an interaction between two changes?

Related reading · Bowtie analysis and barrier management · Hazard Identification Techniques

See it in practice Pharmaceuticals · Examine solvent recovery safeguards

Syllabus topic 2.3 · PSM1

2.3 · Maintaining the integrity of equipment

Assessment criterion. Explain why asset integrity matters and recognise how to develop an appropriate inspection and maintenance strategy.

Connect a credible deterioration mechanism to inspection, maintenance and timely repair. Evaluate the risk of deferred work on equipment credited as a barrier.

Practise applying it. What evidence would show a safety-critical inspection was effective?

Related reading · Asset integrity and mechanical integrity · Maintenance strategy in process industries

See it in practice Fuel storage · Prevent a tank overfill · Paper manufacture · Control loss of steam containment

Syllabus topic 2.4 · PSM1

2.4 · Coordination through work permits

Assessment criterion. Explain who authorises a permit, what it controls and what has to be verified before handback.

Explain how a permit authorises a defined activity and brings operations, maintenance and contractors together. Check interacting permits, isolation status and handback.

Practise applying it. How would operations and maintenance agree equipment is safe to hand back?

Related reading · Permit-to-work Systems

See it in practice Paint manufacture · Check cleaning and maintenance isolation

Syllabus topic 2.5 · PSM1

2.5 · Passing critical information between shifts

Assessment criterion. Recognise how a structured handover transfers information and confirms the incoming operator understands it.

Identify what the incoming operator must know about temporary arrangements, alarms, open permits and plant state. Confirm shared understanding before responsibility transfers.

Practise applying it. Which impaired safeguards must the incoming shift acknowledge?

Related reading · Safe Shift Handover

See it in practice Bulk gas distribution · Keep loading interfaces controlled

Syllabus topic 2.6 · PSM1

2.6 · Contractors at process sites

Assessment criterion. Identify how to select, assess and manage a contractor throughout the work.

Check task-specific competence, exchange hazard information and agree who controls interfaces. Verify conditions at the workface and during reinstatement.

Practise applying it. How would contractors learn the process risks that remain outside their work area?

Related reading · How should contractors be managed in process industries?

See it in practice Water treatment · Control chemical delivery interfaces · Paint manufacture · Check cleaning and maintenance isolation

Element 3 · Operating limits and reliable safeguards

PSM1

Ask five questions. What function must the barrier perform? Will it be available when demanded? How reliably can it deliver? Can it survive the conditions of the event? Which shared utilities or other barriers does it depend on? Link each claim to a performance requirement and evidence. A completed service ticket alone cannot demonstrate all five.

Workplace example

A plant restarts after maintenance and an instrument has no recorded functional check. Compare its required safety duty with the handback record and refer the gap to the authorised decision-maker. An instruction to restart cannot supply the missing evidence.

Syllabus topic 3.1 · PSM1

3.1 · Writing useful operating procedures

Assessment criterion. Identify why procedures are needed and what makes them usable in normal and abnormal conditions.

Identify operating limits, checks, abnormal conditions and escalation decisions. Test procedures with the people who will use them and control revisions.

Practise applying it. Can operators follow the instructions when an indication is unavailable?

Related reading · Standard Operating Procedures

See it in practice Pharmaceuticals · Examine solvent recovery safeguards

Syllabus topic 3.2 · PSM1

3.2 · Preparing for start-up and shutdown

Assessment criterion. Recognise the checks, coordination and controls needed when process plant starts up or shuts down.

Explain why transition periods change the risk. Confirm readiness of equipment, safeguards, competent staff and communication before a state change is authorised.

Practise applying it. Who verifies the plant is ready to move from shutdown to start-up?

Related reading · Safe Start-Up and Shutdown · Pre-Start-Up Safety Review (PSSR) and Operational Readiness

See it in practice Energy generation · Review protective systems after a trip

Syllabus topic 3.3 · PSM1

3.3 · Defining a safeguard’s required performance

Assessment criterion. Explain why safety-critical equipment needs a defined performance standard and apply the FARSI dimensions to a safeguard.

State what the safeguard must do, when it is needed and how verification will show that it remains available, reliable and capable under foreseeable conditions. Use FARSI to check functionality, availability, reliability, survivability and interdependency. For example, ask whether a safety system would still operate if the power supply it shares with the process failed.

Practise applying it. What should the safeguard do, and how would you verify it can still do it?

Related reading · Safety Critical Performance Standards

See it in practice Energy generation · Review protective systems after a trip

Syllabus topic 3.4 · PSM1

3.4 · Steam, water and other plant utilities

Assessment criterion. Recognise hazards from steam and water, their potential consequences and the controls that reduce exposure.

Identify exposure to hot water, escaping steam and unexpected pressure. Explain how isolation, inspection and competent maintenance protect people. Loss of cooling water can also disrupt a process. Trace that separate risk to the equipment and its safeguards.

Practise applying it. What could injure a worker near a steam or hot-water system, and what if a utility fails?

Related reading · Utilities and Process Services

See it in practice Paper manufacture · Control loss of steam containment

Syllabus topic 3.5 · PSM1

3.5 · Electricity and static discharge

Assessment criterion. Recognise electrical and electrostatic hazards and identify suitable controls in the process environment.

Identify where electrical failure or static discharge could injure someone or ignite a hazardous atmosphere. Refer equipment suitability and bonding arrangements to competent specialists.

Practise applying it. Where could an electrical fault or static discharge ignite a release?

Related reading · Electrical hazards in process plants · Static Electricity and Electrostatic Ignition

See it in practice Distilling · Manage flammable vapour during transfer

Syllabus topic 3.6 · PSM1

3.6 · Understanding dangerous substances

Assessment criterion. Relate the physical form of a dangerous substance to how it may be released, spread or expose people.

Use verified identity, hazard properties and handling conditions to identify release consequences. Check compatibility, containment and emergency information for the specific material.

Practise applying it. How do a gas, mist and settled powder expose people differently?

Related reading · Dangerous substances and hazardous properties

See it in practice Food production · Prepare for a refrigeration release · Water treatment · Control chemical delivery interfaces · Anaerobic digestion · Manage gas accumulation

Syllabus topic 3.7 · PSM1

3.7 · Recognising reaction hazards

Assessment criterion. Recognise reaction hazards and identify protective measures that limit the consequences of a runaway reaction.

Explain how an unexpected rise in temperature or pressure can challenge containment. Identify the competent review, protective systems and change controls needed to keep people safe.

Practise applying it. What process information would trigger referral to a reaction-hazards specialist?

Related reading · Reaction Hazards and Runaway Reactions

See it in practice Chemical manufacture · Review a change to a reaction

Syllabus topic 3.8 · PSM1

3.8 · Keeping bulk storage and transfers safe

Assessment criterion. Identify bulk storage hazards and the preventive and protective measures appropriate to the material and operation.

Trace the path from storage through transfer and receipt. Ask how the site prevents overfill or misdelivery, detects a release and limits off-site consequences.

Practise applying it. Which independent checks would reveal a tank overfill safeguard is unavailable?

Related reading · Bulk storage and tank farm safety · Loading, Unloading and Transfer Operations

See it in practice Fuel storage · Prevent a tank overfill · Distilling · Manage flammable vapour during transfer · Bulk gas distribution · Keep loading interfaces controlled

Element 4 · Fire protection and emergency response

PSM1

Escalate the impairment through the site's controlled arrangements. Identify which credible events have lost protection, whether other barriers share the fault and who can decide on safe operating restrictions. Inform affected staff and responders. Return the barrier to service only after competent verification and a recorded handover.

Workplace example

A distribution terminal’s muster exercise works for day staff but leaves visiting drivers unaccounted for. Trace how the gatehouse records arrivals, how drivers receive an alarm and who reconciles the list. Test the change on a different shift.

Syllabus topic 4.1 · PSM1

4.1 · Understanding fire and explosion consequences

Assessment criterion. Identify conditions that allow fire or explosion and recognise possible escalation across a process site.

Trace a credible loss of containment to possible thermal, smoke or pressure effects. Identify people and buildings exposed and the warning or separation they need.

Practise applying it. How could a release escalate into a fire affecting adjacent plant?

Related reading · Fire science for process safety

Syllabus topic 4.2 · PSM1

4.2 · Prevention and protection against fire or explosion

Assessment criterion. Select safeguards appropriate to preventing a fire or explosion and to reducing its effects on people and plant.

Distinguish safeguards that prevent a release or ignition from safeguards that limit its effects. Check that engineered protection is maintained and its dependencies are understood.

Practise applying it. Which barrier prevents ignition and which limits the harm after ignition?

Related reading · Passive Fire Protection, Layout and Separation · Active fire protection

See it in practice Flour milling · Reduce dust explosion escalation

Syllabus topic 4.3 · PSM1

4.3 · Combustible dust in plant

Assessment criterion. Recognise how a combustible dust explosion can arise and identify controls that prevent it or limit its effects.

Recognise work that can release combustible fine material or create accumulations. Use competent assessment to choose containment, housekeeping and equipment protection.

Practise applying it. Where can fine combustible dust accumulate and who checks for it?

Related reading · Dust Explosion Controls and Housekeeping

See it in practice Flour milling · Reduce dust explosion escalation

Syllabus topic 4.4 · PSM1

4.4 · Practising the emergency plan

Assessment criterion. Explain what an emergency plan is for, what it contains and how people are prepared to put it into effect.

Define who raises the alarm, takes command, protects people and communicates with responders and neighbours. Exercise a credible scenario and verify closure of lessons.

Practise applying it. Would the emergency plan account for contractors on a night shift?

Related reading · Emergency preparedness for major accident hazards

See it in practice Food production · Prepare for a refrigeration release · Anaerobic digestion · Manage gas accumulation

How could you use this qualification at work?

At a storage terminal, a supervisor can use the learning to recognise an impaired safeguard and involve the person authorised to decide whether a transfer may proceed.

At a fictional storage terminal, the shift manager learns that a protection function credited for transfer operations is awaiting repair. She asks what hazard the function controls, whether other protection shares the fault and who owns the decision about continued operation. The team follows its impairment arrangements and records restrictions and handover responsibilities. The manager accepts restoration only after the competent team verifies the function and tells the next shift. A good safety record cannot resolve the impairment.

What does this learning look like in different workplaces?

Use these 12 examples to connect a workplace problem with a decision, an accountable role and a check that protection works. Each example links to relevant syllabus references and practical SHAREhub guidance.

These fictional SHAREhub examples show how learning can support real decisions. They are teaching illustrations, with selected issues rather than complete risk assessments or model assessment answers. Apply current guidance and competent judgement to the actual workplace.

Fuel storagePrevent a tank overfill

What could go wrong?

A delivery continues after the normal level indication becomes unreliable. Escaping fuel may form a flammable cloud or pool.

How could you apply the learning?

Trace the separate layers that prevent overfill and limit its consequences. Ask how instruments, independent protection and transfer arrangements are verified by competent people.

Who checks that it works?

The terminal manager checks outstanding defects, proof-test records and transfer authorisation. A learner raises gaps without attempting live protective-system tests.

Study references 3.8 Keeping bulk storage and transfers safe · 2.3 Maintaining the integrity of equipment

Apply it with SHAREhub Bulk storage and tank farm safety · Loading, Unloading and Transfer Operations · Asset integrity and mechanical integrity · Maintenance strategy in process industries

Chemical manufactureReview a change to a reaction

What could go wrong?

A faster addition rate is proposed to increase output. Heat generation could exceed removal and cause runaway or loss of containment.

How could you apply the learning?

Use the management-of-change process to obtain competent reaction-hazard review. Examine operating limits, cooling failure, protective systems and emergency implications.

Who checks that it works?

The technical authority confirms the basis for approval and pre-start checks. Operations verifies training and current procedures before the change is used.

Study references 1.4 Controlling modifications · 3.7 Recognising reaction hazards

Apply it with SHAREhub Management of change in process safety · Reaction Hazards and Runaway Reactions

Food productionPrepare for a refrigeration release

What could go wrong?

A refrigeration pipe develops a leak. Toxic refrigerant could expose maintenance staff and spread into occupied areas.

How could you apply the learning?

Review detection, isolation, evacuation and specialist response with operations. Confirm that routine workers recognise alarms and do not enter a contaminated area.

Who checks that it works?

The plant manager checks alarm and maintenance records and exercises the emergency arrangements with competent support.

Study references 3.6 Understanding dangerous substances · 4.4 Practising the emergency plan

Apply it with SHAREhub Dangerous substances and hazardous properties · Emergency preparedness for major accident hazards

DistillingManage flammable vapour during transfer

What could go wrong?

Spirit transfer creates an opportunity for a release and ignition. People nearby could suffer burns or blast injury.

How could you apply the learning?

Review containment, ventilation, hazardous-area assessment, suitable equipment and static control with competent specialists. Explain which barriers prevent a release and which limit escalation.

Who checks that it works?

The distillery manager checks transfer readiness, defects and change records. Do not assume the same zone extent applies to every transfer location.

Study references 3.5 Electricity and static discharge · 3.8 Keeping bulk storage and transfers safe

Apply it with SHAREhub Electrical hazards in process plants · Static Electricity and Electrostatic Ignition · Bulk storage and tank farm safety · Loading, Unloading and Transfer Operations

PharmaceuticalsExamine solvent recovery safeguards

What could go wrong?

A solvent recovery unit operates near temperature and pressure limits. An upset could damage containment and release flammable vapour.

How could you apply the learning?

Read the approved operating limits with an experienced operator. Identify monitoring, protective action and the response to a deviation, including safe shutdown arrangements.

Who checks that it works?

The production lead checks alarm response training and unresolved deviations. Technical specialists assess any proposed limit or equipment change.

Study references 2.2 Selecting process risk techniques · 3.1 Writing useful operating procedures

Apply it with SHAREhub Bowtie analysis and barrier management · Hazard Identification Techniques · Standard Operating Procedures

Flour millingReduce dust explosion escalation

What could go wrong?

Dust accumulates around a transfer point. Ignition could initiate an explosion and disturb deposits into a larger event.

How could you apply the learning?

Consider dust containment, extraction and safe housekeeping alongside ignition control. Have competent specialists assess explosion protection and propagation between connected plant.

Who checks that it works?

The mill manager checks leaks, deposits and protective-system maintenance. Review modifications to ductwork or production rate before use.

Study references 4.3 Combustible dust in plant · 4.2 Prevention and protection against fire or explosion

Apply it with SHAREhub Dust Explosion Controls and Housekeeping · Passive Fire Protection, Layout and Separation · Active fire protection

Water treatmentControl chemical delivery interfaces

What could go wrong?

A chemical delivery is directed towards an incorrect connection. Mixing incompatible substances could release toxic gas.

How could you apply the learning?

Review identification, connection security and independent checks at the delivery interface. Confirm the supplier and site share an agreed acceptance and emergency procedure.

Who checks that it works?

The treatment manager observes the process with authorised staff and checks how an unexpected delivery or damaged label is handled.

Study references 2.6 Contractors at process sites · 3.6 Understanding dangerous substances

Apply it with SHAREhub How should contractors be managed in process industries? · Dangerous substances and hazardous properties

Anaerobic digestionManage gas accumulation

What could go wrong?

Gas may accumulate around plant or enclosed spaces. A person could be poisoned, asphyxiated or injured by fire.

How could you apply the learning?

Identify where gas may be released and which safeguards control exposure. Review restricted access, suitable monitoring, maintenance and specialist rescue arrangements.

Who checks that it works?

The operator checks defects and emergency preparedness. Learners inspect records and safe observation points without entering hazardous spaces.

Study references 3.6 Understanding dangerous substances · 4.4 Practising the emergency plan

Apply it with SHAREhub Dangerous substances and hazardous properties · Emergency preparedness for major accident hazards

Paper manufactureControl loss of steam containment

What could go wrong?

An ageing steam line loses thickness while supplying production. Failure could release high-energy steam and cause fatal burns.

How could you apply the learning?

Review the integrity scheme, operating conditions and arrangements for isolation and maintenance with the engineering team. Ask how overdue inspections affect continued operation.

Who checks that it works?

The engineering manager resolves fitness-for-service decisions with competent specialists and records the basis for safe operation.

Study references 2.3 Maintaining the integrity of equipment · 3.4 Steam, water and other plant utilities

Apply it with SHAREhub Asset integrity and mechanical integrity · Maintenance strategy in process industries · Utilities and Process Services

Bulk gas distributionKeep loading interfaces controlled

What could go wrong?

A shift handover omits an isolation defect at a loading point. A subsequent transfer could release gas or expose people to moving vehicles.

How could you apply the learning?

Trace the handover, defect escalation and release-to-service process. Review how equipment status reaches the next operator and visiting driver.

Who checks that it works?

The depot manager samples handovers and defect closure evidence. Unresolved safety-critical defects remain visible in operating decisions.

Study references 3.8 Keeping bulk storage and transfers safe · 2.5 Passing critical information between shifts

Apply it with SHAREhub Bulk storage and tank farm safety · Loading, Unloading and Transfer Operations · Safe Shift Handover

Paint manufactureCheck cleaning and maintenance isolation

What could go wrong?

A contractor is asked to clean a vessel that may contain flammable residue. Ignition or a hazardous atmosphere could cause multiple fatalities.

How could you apply the learning?

Challenge the need for entry and review isolation, cleaning, atmospheric assessment and permit arrangements with competent authorised personnel. Coordinate simultaneous work.

Who checks that it works?

The permit authority checks the actual conditions and contractor understanding. Emergency arrangements must be established before any authorised entry.

Study references 2.4 Coordination through work permits · 2.6 Contractors at process sites

Apply it with SHAREhub Permit-to-work Systems · How should contractors be managed in process industries?

Energy generationReview protective systems after a trip

What could go wrong?

A combustion system trips repeatedly and operators suggest bypassing an interlock. Fuel accumulation could lead to an explosion on restart.

How could you apply the learning?

Escalate the repeated trips for competent diagnosis. Review the safe operating envelope, start-up checks and controls on overrides before authorising restart.

Who checks that it works?

The operations manager confirms the cause is addressed, protections are available and the approved restart criteria are satisfied.

Study references 3.2 Preparing for start-up and shutdown · 3.3 Defining a safeguard’s required performance

Apply it with SHAREhub Safe Start-Up and Shutdown · Pre-Start-Up Safety Review (PSSR) and Operational Readiness · Safety Critical Performance Standards

What should you check before your assessment?

Confirm the closed-book PSM1 arrangements and practise identifying a failed barrier, its consequence and the decision that would protect people.

How is PSM1 assessed?

PSM1 is a closed-book online multiple-choice assessment. The guide specifies 40 compulsory questions in 90 minutes, including ten extended scenario questions. Each item has one correct response and is worth one mark. Practise identifying the hazard, degraded barrier and relevant decision before looking at the options. Use the current online assessment instructions for access and identification arrangements.

What is the PSM1 pass mark and is there a distinction?

The pass standard is 60%. On a 40-question paper with one mark per question, that is 24 correct responses. The qualification result is pass or refer. There is one unit and no separate workplace portfolio. If referred, use the feedback available through your Learning Partner to identify areas for further study and arrange a new assessment entry.

Who is the process safety qualification designed for?

The NEBOSH HSE Certificate in Process Safety Management focuses on preventing and mitigating major process incidents. It suits people who influence operations, maintenance, supervision and management in process industries. It was developed with HSE. It develops understanding for contributing to process safety and does not certify competence to design relief protection, approve a modification or authorise plant operation. Check the exact award name on older oil and gas paperwork before making an equivalence claim.

When are the PSM1 result and parchment issued?

NEBOSH publishes a result expectation of 15 working days from the assessment and normally issues the parchment within 20 working days of confirming a pass. Check your entry and the current awarding-body notice for personal dates. A referred learner should discuss preparation and re-entry with the Learning Partner. A SHAREhub learning record cannot establish an official result.

Can I study while working full time?

Yes, if you can protect enough regular study time and arrange the assessment period. Compare day release, evening study, taught blocks and supported online learning with your shift pattern. Ask about tutor access, missed sessions and practice feedback. Agree any workplace evidence collection and study leave with your employer before enrolling.

What should I ask a Learning Partner before paying?

Ask for a written breakdown of tuition, materials, assessment registration, resits and any additional support costs. Confirm accreditation for the exact qualification, the specification taught, assessment dates, tutor access and how workplace access is supported. Compare the complete package and your available time. Fees and funding depend on the provider and your circumstances.

Can disability, dyslexia or another access need be supported?

Discuss your needs with the Learning Partner early so it can apply for appropriate access arrangements or reasonable adjustments. NEBOSH determines the approved arrangement. Confirm it before the assessment and raise any mismatch promptly. The aim is fair access while retaining the assessment standard.

Can I use SHAREhub AI or another AI tool during an assessment?

Only use AI if your specific assessment instructions or an approved reasonable adjustment explicitly permit it. NEBOSH’s current malpractice policy otherwise prohibits AI use during assessment. Keep assessment questions and controlled materials out of AI tools. Use SHAREhub for general learning outside assessment conditions and produce your own assessed work.

Does passing make me a competent safety adviser?

Passing provides evidence of assessed learning. Competence also depends on relevant skills, experience and behaviours, and on the complexity of the work. Build supervised practice, seek feedback, keep knowledge current and recognise when to involve a specialist. An employer or client should evaluate what you can reliably do in the actual role.

Will this guarantee a job or professional membership?

No qualification can guarantee a job or a membership grade. Employers consider relevant experience, communication, judgement and the needs of the role alongside learning. Check the professional body’s current requirements for your exact award, experience and continuing development before claiming eligibility.

What should I do if I receive a refer result?

Use the result notice and available feedback to identify the outstanding requirement, then agree further study and re-entry with your Learning Partner. Confirm the applicable specification, unit validity and fees before booking. If you believe the result should be reviewed, ask promptly about the current NEBOSH enquiries-about-results process and its deadline.

Does the framework level mean this is the same as another qualification?

A framework level describes the demand of learning. It does not make two awards identical in size, subject coverage or purpose. Always give the framework name, qualification title and specification. Credits describe learning volume, while professional recognition and permission to undertake a role have separate requirements.

What responsibilities can I take on after this qualification?

Use this learning to ask better questions about process hazards and the barriers that prevent major incidents. Plant design, hazardous-area classification, relief-system sizing, protective-system validation and operating authorisation require appropriate specialist competence and site authority.

How does this compare with other NEBOSH qualifications?

Choose Process Safety Management for work involving major releases and process plant. Choose the General Certificate if your immediate need is everyday occupational risk management.

Where can you check the official syllabus and assessment guidance?

NEBOSH publishes the syllabus and assessment guidance for this qualification. Match the unit code and specification on your registration to the guides below.