SHARE Knowledge Hub

NEBOSH Health and Safety Management for Construction (UK)

Learn to make safety decisions as a construction project changes, from early planning to handover between trades.

CN1Updated

Understanding NEBOSH Health and Safety Management for Construction (UK)

Learn to make safety decisions as a construction project changes, from early planning to handover between trades.

Why this matters at work

Hand-arm vibration enters through tools or vibrating workpieces held by the hands. It can damage nerves and circulation and contribute to loss of hand function. Whole-body vibration enters through a seat or standing surface, often in mobile plant, and can contribute to back problems alongside shocks and posture. Identify both exposures separately; a person may use a breaker and then drive a vehicle in one shift. Do not add their acceleration values together or apply hand-arm thresholds to a vehicle assessment. Assess the actual work, exposure duration and conditions before selecting controls. Reduce the need for vibration, select suitable lower-vibration equipment, maintain tools and surfaces and organise work to avoid unnecessary exposure. For vehicle tasks, consider route condition, speed, seat adjustment and posture. Give workers a clear symptom-reporting route and review changed work promptly. Records should identify tasks, assumptions, controls and responsible owners. A comfortable-feeling tool or a manufacturer's laboratory emission figure alone is not a sufficient assessment of each worker's daily exposure.

Check the job design before attributing errors to carelessness. Noise can mask signals, vibration may affect tool users and rushed programmes can reduce recovery time. Ask workers about the task, hours and handovers. Reduce the exposure and demands at source, then observe whether communication and performance improve.

How organisations manage this in practice

Identify who has maintenance or repair responsibilities and control of the relevant premises before assigning the duty to manage. It can involve an owner, landlord, occupier or shared responsibilities. Confirm the governing GB or NI instrument and scope; the building’s ownership label alone may not settle the duty. Establish where asbestos containing or presumed materials are, their condition and who could disturb them. Maintain a reliable register and a site specific management plan with responsibilities, priorities, condition monitoring, information sharing and emergency action. Do not assume missing survey information means no asbestos. Sound material may be managed in place where appropriate; removal is not automatically the safest option. Give relevant information to maintenance workers and contractors before exposure is possible and ensure it reaches the actual task. Keep uninspected areas and uncertainty visible and update records after work or change. Verify implementation through the work gateway and physical checks, rather than treat a register or survey file as the completed management system.

A programme controls the whole lifecycle: design and procurement, identification of spaces, avoidance of entry, planning, competence, live work, emergency readiness, handback and learning. Start by identifying where foreseeable work may involve specified risks and who controls those places. Include contractors, unusual tasks and temporary conditions. Keep the inventory useful for planning, but recognise that the actual task can change the classification or hazards. Set clear accountable roles, technical standards and evidence required before work. Resource suitable assessment, isolation, detection, ventilation, supervision and rescue rather than treating the permit as the main barrier. Check that standards work across shifts and absences. Audit decisions and physical controls, then use findings to improve design and maintenance. GB and NI use separate legislation. A complete register or approved template neither proves that an individual entry is necessary nor establishes its safe conditions.

Consider flames and sparks, hot surfaces, electrical equipment, static discharge, friction, impact and foreseeable equipment faults. The significance depends on the actual gas, vapour, dust, oxygen conditions and release location. Identify and prevent dangerous atmospheres first where possible, then select suitable ignition controls through the assessment. Equipment suitability includes its installation, use, maintenance and the actual hazardous area; a familiar tool or portable device is not automatically acceptable. Check normal work, cleaning, maintenance and abnormal conditions, including temporary equipment and contractor activity. Control simultaneous work and changes that introduce fuels or ignition. Record restrictions, inspection and verification needs and the response to failure. GB and NI DSEAR routes are separate and general fire precautions use national frameworks. This answer does not assign a zone or approve a device, and PPE cannot make an explosive atmosphere acceptable.

Who is the Construction (UK) qualification for?

This qualification suits site supervisors, project managers, construction workers and people advising contractors. It is particularly useful when several trades, vehicles and members of the public meet around changing work.

Unit
CN1
Framework
SCQF 7 · comparable to RQF 4
Learning time
70 taught + 40 private-study hours
Assessment window
48 hours to complete and upload CN1
Practical access
A construction scenario is supplied

Learning hours are planning figures. Assessment effort and submission windows are different. Confirm your Learning Partner’s timetable.

A segregated walkway and workers reviewing a UK construction site.
Qualification level

SCQF Level 7 with 12 Scottish credits, comparable to RQF Level 4. The Level 7 version is recognised for the CSCS Academically Qualified Person card route. Check your award edition and the separate CSCS application requirements.

What you can do with it

Learn to challenge a weak construction phase plan. On a school refurbishment, for example, you could identify where deliveries cross the pupil entrance, agree a safer sequence with the school and contractors, and check it during a real arrival.

How do you turn qualification knowledge into workplace competence?

You build competence by applying what you learn to real tasks under suitable supervision and checking the results. Passing a NEBOSH qualification shows that you have met its assessment requirements. Workplace competence also takes practical skills, relevant experience and behaviours such as listening to workers, speaking up about risk and checking that a change protects people. Practise with an experienced colleague, ask for feedback and seek specialist help when a decision goes beyond your experience.

On the school refurbishment, walk the delivery route with the site supervisor and the school caretaker before pupils arrive. If a barrier diverts pupils into the unloading area, speak up and have the delivery held. Check the revised route during the next school arrival.

Use this learning to improve construction planning, coordination and site decisions. A qualification alone does not establish competence to act as a principal designer, design temporary works, plan a complex lift or inspect specialist equipment. Match responsibilities to relevant knowledge, experience and support.

Follow the worked example · HSE guidance on competence

What are the entry requirements?

There is no formal entry qualification or trade-ticket prerequisite. NEBOSH recommends English equivalent to IELTS 6.0 or above. Site experience helps you interpret scenarios. The assessment supplies its own fictional project, so discuss course suitability with the Learning Partner even if you are between sites.

Choosing a study route

An intensive classroom block can suit someone released from a project. Part-time day release spreads learning across projects. Supported distance learning suits people moving between sites. NEBOSH specifies at least 70 taught hours and around 40 hours of private study ahead of assessment. Ask an accredited Learning Partner which arrangement it offers.

Taught block

Useful when you can step away from normal work for concentrated learning. Protect time for preparation, private study and assessment outside classroom sessions.

Day release or evening study

Useful when you want to apply a topic between sessions. Agree reliable release time and avoid allowing routine work to displace every study period.

Supported online or distance learning

Useful for location or shift flexibility. Check tutor response times, access duration, live sessions, practice feedback and the technology needed.

Blended learning

Useful when you want independent study alongside scheduled discussion. Check which sessions are compulsory and how the provider supports workplace activities.

How is the Construction (UK) qualification assessed?

CN1 is one digital assessment. You use a supplied construction scenario to show how you would manage its risks.

CN1 · Read the project evidence

The single open-book digital assessment describes a fictional construction site. Read the scenario and supporting information and identify the facts that change the risk, such as simultaneous trades or access next to the public.

CN1 · Complete the tasks and submit

Apply construction safety knowledge to the supplied tasks, including a risk assessment exercise. The window to access, complete and upload the paper is 48 hours. Plan breaks and time to check the upload. Follow the Learning Partner’s instructions for the closing interview.

Passing and grading

The CN1 result sets the award. NEBOSH gives a provisional pass mark of 45%, credit from 65% and distinction from 75%. Results for English assessments are normally issued within 50 working days. This is the successor to the National Certificate in Construction Health and Safety. Older NCC1 or NCC2 results need checking against the learner’s own registration.

How can you prepare for each stage of the assessment?

Start with the instructions for your registered unit, then practise connecting evidence to a reasoned decision. The steps below explain an approach to preparation and common mistakes to recognise.

  1. Map the project before answering

    Identify the stage of work, people exposed, contractors, public interfaces and changing conditions in the supplied scenario. Read the tasks and supporting information together.

    Common mistake Assuming every construction project has the same duties, interfaces or work sequence.

  2. Connect roles to actions

    Explain what the relevant client, designer or contractor should do for the issue described. Establish the applicable jurisdiction before referring to legal duties.

    Common mistake Naming a CDM dutyholder without explaining the action needed on this project.

  3. Explain the physical risk

    Describe how the task could injure someone or cause ill health. Consider unstable ground, falls, plant movement, dust and other hazards only where they fit the question.

    Common mistake Treating long-term health exposures as less important because no immediate injury is visible.

  4. Choose a workable control sequence

    Consider design and avoidance first, then suitable engineering and organisational controls. Explain who coordinates conflicting work and how the arrangement is checked as the project changes.

    Common mistake Relying on PPE or a generic method statement while the main danger remains uncontrolled.

  5. Review and submit CN1

    Complete the required tasks, check that recommendations use the scenario evidence and upload within the 48-hour window. Prepare to explain your own submission at the closing interview.

    Common mistake Confusing a 48-hour submission window with an instruction to work continuously for 48 hours.

Check the official assessment guidance

Which elements and assessment criteria does the Construction (UK) qualification cover?

CN1 covers 13 elements, from appointing the right dutyholders to controlling hazards as a site changes.

The references below follow the numbered syllabus content. The assessment criteria for elements 1 to 3 address knowledge and its application. For elements 4 to 13 the overarching criterion draws on a range of construction hazards in a risk assessment.

Read the official NEBOSH syllabus

Element 1 · Planning responsibilities and site arrangements

CN1

Identify who can change the design and who controls the construction sequence. Give the decision-maker useful information about the remaining risk and confirm the agreed change reaches the contractor doing the work. In Great Britain the client, designer and contractor duties under CDM 2015 depend on their role. Northern Ireland has its own CDM Regulations 2016.

What the assessment asks you to do

  • CN1 · 1.1 Explain how preventing site harm protects people and makes financial sense for the project.
  • CN1 · 1.2 Identify the CDM roles and duties, how contractors are selected and monitored, and how technology can help coordinate decisions across the project lifecycle.
  • CN1 · 1.3 Describe the range of construction work and how the activities change across a project.
  • CN1 · 1.4 Identify the information and observations needed when assessing a site before work.
  • CN1 · 1.5 Identify practical arrangements for site security, access and good order.
  • CN1 · 1.6 Summarise how temporary works are designed, coordinated, checked and controlled.
  • CN1 · 1.7 Outline suitable welfare and arrangements for people and conditions specific to the site.

Workplace example

During a school extension, the designer moves a gate onto the pupil route. Have the client, designer and principal contractor trace the change from revised drawing to delivery booking. At the gate, check that the driver and caretaker received the same plan.

Syllabus topic 1.1 · CN1

1.1 · Making the case for site safety

Explain the human and business effects of a serious incident, including rework, delay and enforcement. Use an actual project decision to show the benefit of prevention.

Practise applying it. What would a serious injury cost the worker, the project and the people around it?

Related reading · Foundations of Construction Health and Safety Management

Syllabus topic 1.2 · CN1

1.2 · Project roles and coordination

Identify who controls design, pre-construction information, the construction phase and handover. Check the applicable CDM duties for Great Britain or Northern Ireland.

Practise applying it. Who can change a design that brings deliveries across a public entrance?

Related reading · What are the Construction Design and Management Regulations? · What should a construction phase plan include?

Syllabus topic 1.3 · CN1

1.3 · How construction activities change risk

Compare a new build with alteration or dismantling. Ask how sequence, existing structures and temporary conditions affect stability and other trades.

Practise applying it. How does risk change when excavation gives way to fit-out?

Related reading · How should construction hazards be controlled?

Syllabus topic 1.4 · CN1

1.4 · Assessing the site before work

Check previous use, survey coverage, services, ground conditions, neighbours and access. Resolve significant information gaps before planning intrusive work.

Practise applying it. What would you inspect before choosing a delivery route?

Related reading · Foundations of Construction Health and Safety Management · Buried services and safe excavation

Syllabus topic 1.5 · CN1

1.5 · Site layout, security and order

Trace deliveries, pedestrian entry, storage and public boundaries. Plan housekeeping and out-of-hours security as the site footprint changes.

Practise applying it. How could unauthorised people reach an unfinished work area?

Related reading · What should a construction phase plan include?

See it in practice Industrial construction · Coordinate lifting over shared space · Public-sector projects · Protect people outside the site

Syllabus topic 1.6 · CN1

1.6 · Managing temporary works

Identify temporary supports or platforms, assign competent design and checking, and agree the hold points for installation, loading, alteration and removal.

Practise applying it. Who can approve changes to temporary support?

Related reading · How should construction hazards be controlled?

See it in practice Civil engineering · Control a temporary works change

Syllabus topic 1.7 · CN1

1.7 · Welfare and changing site conditions

Plan washing, drinking water, toilets, changing and rest facilities from the start. Consider remote trades, language needs, fatigue and weather exposure.

Practise applying it. Will welfare facilities still be usable when the next trade arrives?

Related reading · Health, Welfare and Work Environment

Element 2 · Site culture and risk assessment

CN1

Speak to short-duration trades as well as supervisors. Walk the route together and compare the planned controls with conditions during a busy shift. Ask what happens when deliveries arrive early or a route is shut. Record who can correct the cause and verify the change with the workers exposed to it.

What the assessment asks you to do

  • CN1 · 2.1–2.3 Describe how culture affects performance, summarise the human factors that shape behaviour, and explain practical ways to improve site culture.
  • CN1 · 2.4, elements 4–13 Explain risk assessment principles and apply them to a range of site hazards from elements 4–13. Evaluate existing precautions, propose further controls and plan the actions using the supplied scenario.

Workplace example

An agency labourer spots a loose panel but knows only the name of the person who signed the induction. Test how they would report it during a shift. Ask who makes the area safe and how the worker hears what happened.

Syllabus topic 2.1 · CN1

2.1 · Reading site culture

Compare a formal site rule with how supervisors act under deadline pressure. Ask different trades what happens when they report a concern.

Practise applying it. What does the response to a stop-work concern tell you about site culture?

Related reading · Safety Culture

Syllabus topic 2.2 · CN1

2.2 · People, tasks and the organisation

Consider workload, supervision, noise, instructions and the individual together when explaining an unsafe act. Identify a change a supervisor can make.

Practise applying it. What pressures could lead an experienced worker to take a shortcut?

Related reading · Human Factors and Behaviour

Syllabus topic 2.3 · CN1

2.3 · Improving how people speak up

Use briefings and worker consultation to address difficulties before work begins. Give people on every shift feedback on what changed and why.

Practise applying it. How would you find out whether subcontractors feel able to raise a concern?

Related reading · How should workplaces consult and engage workers?

Syllabus topic 2.4 · CN1

2.4 · Assessing construction risks

Walk the work area, identify who is at risk and consider existing protection. Explain priorities, further measures, responsible people and review triggers.

Practise applying it. What new risk might a diversion create for pedestrians?

Related reading · Risk Assessment and Risk Profiling

Element 3 · Change, permits and emergency procedures

CN1

Pause the conflicting activity, identify who controls both jobs and review the interfaces before agreeing a revised sequence. Explain the new boundary to both teams and check access, isolation and escape arrangements on site. A revised method statement sitting in the site office will not protect a crew working to yesterday's plan.

What the assessment asks you to do

  • CN1 · 3.1 Discuss how project changes can alter exposure and how the team can reduce those effects.
  • CN1 · 3.2–3.4 Describe how to develop and introduce a safe system, explain permit controls, and discuss emergency plans, exercises and first aid.
  • CN1 · 3.5 Explain why and how to investigate an incident, record the evidence and report it appropriately.
  • CN1 · 3.6 Explain how to obtain, analyse and present performance data and identify what it can and cannot show about controls.

Workplace example

A road closure moves a concrete delivery to an earlier shift. Recheck plant movements, neighbours and rescue access with the crew before accepting the revised method. Observe the first delivery under the changed arrangements.

Syllabus topic 3.1 · CN1

3.1 · Handling design or site changes

Reassess interfaces when sequence, ground conditions or subcontractors change. Stop affected work if safeguards need redesign and brief all parties before restart.

Practise applying it. Who needs to know when a revised drawing changes the work sequence?

Related reading · Management of workplace change

See it in practice Civil engineering · Control a temporary works change

Syllabus topic 3.2 · CN1

3.2 · Writing a usable work method

Plan the work with the trades involved. Include preparation, safe access, task sequence, interfaces and the conditions that require the crew to stop.

Practise applying it. Can the team explain the safe method in their own words?

Related reading · Safe Systems of Work

See it in practice Rail infrastructure · Plan fatigue-sensitive night work

Syllabus topic 3.3 · CN1

3.3 · Permits on changing sites

Identify high-risk activities requiring coordinated authorisation. Explain how issuers and receivers check isolation, simultaneous work, expiry and handback.

Practise applying it. How will the permit issuer know a conflicting trade has stopped?

Related reading · Permit-to-work Systems

Syllabus topic 3.4 · CN1

3.4 · Site emergencies and first aid

Choose alarm, escape, rescue and first-aid arrangements for the current phase. Check access for responders when routes or hoarding move.

Practise applying it. How could crews summon help from the least accessible part of the site?

Related reading · Emergency procedures and first-aid needs

Syllabus topic 3.5 · CN1

3.5 · Learning after a site incident

Make the area safe, preserve evidence and gather accounts from relevant trades. Trace failures back to planning and verify the agreed preventive changes.

Practise applying it. Which evidence would you preserve after a near miss involving plant?

Related reading · Incident Investigation, Recording and Reporting

Syllabus topic 3.6 · CN1

3.6 · Using performance information

Compare inspection findings, overdue defects and worker reports with injury and near-miss trends. Explain what the data misses before deciding priorities.

Practise applying it. What do repeated reports of damaged barriers tell the project manager?

Related reading · Active and reactive monitoring

Element 4 · Excavations and buried services

CN1

Keep people out of the affected excavation until a competent person has reassessed stability, water, adjacent loads and the protection in place. Consider nearby structures, plant movement and services. Record the changed conditions and communicate the decision to every trade using the excavation before work resumes.

What the assessment asks you to do

  • CN1 · 2.4, elements 4–13 Explain risk assessment principles and apply them to a range of site hazards from elements 4–13. Evaluate existing precautions, propose further controls and plan the actions using the supplied scenario.

Workplace example

Rain collects beside a trench during a weekend break. Keep people away while the competent person checks support and the effect of water and adjacent loads. Record the conditions for authorised re-entry and communicate them at the next briefing.

Syllabus topic 4.1 · CN1

4.1 · Understanding excavation hazards

Consider unstable ground, water, existing structures, buried services and loads at the edge. Use site-specific information and competent assessment before digging.

Practise applying it. Which nearby loads or services could change the risk of a trench?

Related reading · Excavations: ground, services and inspection · Buried services and safe excavation

See it in practice Housebuilding · Keep an excavation stable

Syllabus topic 4.2 · CN1

4.2 · Keeping excavations safe

Plan suitable support or battering, safe access, inspections and segregation. Recheck after weather, loading or other changes that may affect stability.

Practise applying it. What should happen if a support or excavation inspection raises doubt?

Related reading · Excavation safety and field controls

See it in practice Housebuilding · Keep an excavation stable · Utilities · Confirm buried services before digging

Syllabus topic 4.3 · CN1

4.3 · Confined spaces on site

Consider chambers and other enclosed locations where a specified serious risk can arise. Plan to avoid entry and verify safe methods and rescue if entry is necessary.

Practise applying it. Could the atmosphere or configuration make entry a confined-space task?

Related reading · How should confined spaces risk management be organised?

Element 5 · Demolition and structural stability

CN1

A part that appears redundant may still support another element. Changes to the sequence can alter the load path, debris zone and protection for neighbouring occupants. Refer the change to the competent team responsible for the engineered sequence. Maintain exclusion, service controls and communication while the work is reassessed.

What the assessment asks you to do

  • CN1 · 2.4, elements 4–13 Explain risk assessment principles and apply them to a range of site hazards from elements 4–13. Evaluate existing precautions, propose further controls and plan the actions using the supplied scenario.

Workplace example

A strip-out drawing omits a beam exposed behind a ceiling. Stop the affected work, protect the area and get a competent structural review. Trace any revised sequence through to the crew before allowing the work to resume.

Syllabus topic 5.1 · CN1

5.1 · Stability during demolition

Consider how each removal changes load paths and exposure to falling material. Plan the sequence, exclusion areas and protection for adjoining premises.

Practise applying it. How would you establish whether removing a member affects stability?

Related reading · Demolition and dismantling safety

See it in practice Demolition · Sequence work to preserve stability

Syllabus topic 5.2 · CN1

5.2 · Information before dismantling

Use a competent survey to identify structure, hazardous materials, services and neighbouring risks. Define any information needed before the demolition plan can proceed.

Practise applying it. Which survey and service records should be confirmed before dismantling?

Related reading · Demolition and dismantling safety · Asbestos risk management and compliance

See it in practice Demolition · Sequence work to preserve stability

Element 6 · Mobile plant and vehicle movements

CN1

Walk the route at the time deliveries actually occur. Check visibility from the cab and the pedestrian's approach, temporary obstructions and the unloading position. Seek ways to eliminate reversing and separate people from plant. Brief drivers and trades, then observe a representative delivery to verify the arrangement.

What the assessment asks you to do

  • CN1 · 2.4, elements 4–13 Explain risk assessment principles and apply them to a range of site hazards from elements 4–13. Evaluate existing precautions, propose further controls and plan the actions using the supplied scenario.

Workplace example

A telehandler route crosses the only path to the canteen. Walk the route during break time and design out the crossing where practicable. Check how visiting drivers and workers see the separation after deliveries have queued.

Syllabus topic 6.1 · CN1

6.1 · Safe pedestrian routes

Map how people reach welfare, workfaces and exits as the project progresses. Separate them from plant movements and protect crossings and blind spots.

Practise applying it. Can a visitor reach reception without crossing a live plant route?

Related reading · Safe Movement of People and Vehicles in the Workplace

See it in practice Roadworks · Protect workers beside live traffic

Syllabus topic 6.2 · CN1

6.2 · Managing plant movements

Consider ground conditions, reversing, visibility, competent operators and machine selection. Check the arrangements at the busiest delivery or shift change.

Practise applying it. What change would reduce the need for reversing?

Related reading · Mobile plant and vehicles

See it in practice Roadworks · Protect workers beside live traffic

Syllabus topic 6.3 · CN1

6.3 · Driving between sites

Assess journey planning, driver fitness and vehicle condition. Allow time for deliveries, weather and work schedules without pressuring someone to drive fatigued.

Practise applying it. Does the journey plan allow a driver to stop without time pressure?

Related reading · Driving at Work

Element 7 · Working at height

CN1

First decide whether the job can be done from the ground. Where height work remains, consider collective prevention and safe access before individual protection. A personal system needs suitable design, competent use and a workable rescue arrangement. Check the actual platform, edges, access and condition at the stage the task will occur.

What the assessment asks you to do

  • CN1 · 2.4, elements 4–13 Explain risk assessment principles and apply them to a range of site hazards from elements 4–13. Evaluate existing precautions, propose further controls and plan the actions using the supplied scenario.

Workplace example

A facilities team proposes a ladder to replace several fittings over a school corridor. Ask whether fittings can be serviced from below and, if access is necessary, review duration, equipment and the area underneath with the competent planner.

Syllabus topic 7.1 · CN1

7.1 · Planning work at height

Assess falls of people and materials, including fragile surfaces. Work through avoidance, prevention and consequence reduction while planning access and rescue.

Practise applying it. Can the task be redesigned to remove the fall exposure?

Related reading · Working at Height

See it in practice Roofing · Prevent a fall through a fragile roof

Syllabus topic 7.2 · CN1

7.2 · Using access equipment and roofs

Select access equipment for the task, duration and ground. Verify safe platforms, inspection status, edge protection and the route onto the roof.

Practise applying it. How would you establish whether the roof or chosen access equipment is suitable?

Related reading · Scaffolding Safety · Working at Height

See it in practice Roofing · Prevent a fall through a fragile roof

Syllabus topic 7.3 · CN1

7.3 · Protecting people below and nearby

Identify workers, visitors and the public who could be struck below a workface. Combine secure materials, edge protection and controlled access as appropriate.

Practise applying it. Who could be struck below and how could you protect them?

Related reading · Dropped Objects

See it in practice Public-sector projects · Protect people outside the site

Element 8 · Moving and lifting materials

CN1

Plan the delivery, storage and installation together. Deliver to the point of use if practicable, select suitable mechanical aids and make space for them. Consider wind, sharp edges, people nearby and the final fixing position. Check that the new handling method can still be used once other trades occupy the floor.

What the assessment asks you to do

  • CN1 · 2.4, elements 4–13 Explain risk assessment principles and apply them to a range of site hazards from elements 4–13. Evaluate existing precautions, propose further controls and plan the actions using the supplied scenario.

Workplace example

Plasterboard is delivered at the wrong end of a refurbishment. Change the delivery point or handling equipment and walk the full route, including doors and turns. Ask the installers whether the change actually removed the awkward carry.

Syllabus topic 8.1 · CN1

8.1 · Repetitive and awkward work

Watch a trade repeat a task through a shift. Identify force, posture, reach and recovery time and test better positioning or tools with workers.

Practise applying it. Which part of fixing or fitting work repeats an awkward motion?

Related reading · Musculoskeletal issues, ergonomics and manual handling

Syllabus topic 8.2 · CN1

8.2 · Controlling manual handling

Plan delivery and storage close to use so loads need less handling. Assess remaining lifts and use mechanical aids where practical.

Practise applying it. Could a change to the delivery location remove a manual carry?

Related reading · Manual handling

Syllabus topic 8.3 · CN1

8.3 · Handling loads mechanically

Select equipment for the load, ground and available space. Coordinate lifting, check equipment status and control who can enter the danger area.

Practise applying it. How would the team verify the load, route and lifting arrangements?

Related reading · Load-Handling Equipment and Lifting Operations

See it in practice Industrial construction · Coordinate lifting over shared space

Element 9 · Construction work equipment

CN1

A hire record is only part of the evidence. Confirm suitability for the attachment, ground, task, operator and people nearby. Check safeguards and evidence of inspection, then agree defect reporting and isolation. Move a defective item out of use under the site arrangements and verify the replacement before work restarts.

What the assessment asks you to do

  • CN1 · 2.4, elements 4–13 Explain risk assessment principles and apply them to a range of site hazards from elements 4–13. Evaluate existing precautions, propose further controls and plan the actions using the supplied scenario.

Workplace example

A cutting bench arrives without the guard specified for the intended task. Keep it out of service, verify suitability with the supplier and have the competent person check the complete setup before use. Record who accepts it back.

Syllabus topic 9.1 · CN1

9.1 · Selecting site equipment

Check the equipment suits the task, users, weather and temporary supply. Plan instruction, inspection and maintenance as the project moves between phases.

Practise applying it. What site conditions could make normally suitable equipment unsafe?

Related reading · Work Equipment General Requirements

Syllabus topic 9.2 · CN1

9.2 · Managing hand tools

Select suitable tools and accessories, check condition and control exposure during use. Arrange prompt replacement when a guard, handle or cable is defective.

Practise applying it. How would you recognise a tool unsuitable for wet or dusty work?

Related reading · Hand-Held Tools

See it in practice Groundworks · Control hand-arm vibration exposure

Syllabus topic 9.3 · CN1

9.3 · Protecting machinery users

Look for trapping, cutting and ejection during normal work and intervention. Check guards and safe isolation before servicing or clearing a blockage.

Practise applying it. Where are people exposed when a machine is adjusted or cleaned?

Related reading · Machinery safety and control systems

Syllabus topic 9.4 · CN1

9.4 · Working beside water

Consider slips, falls, currents, cold water and workers who may be unable to self-rescue. Plan barriers, safe access and a site-specific rescue response.

Practise applying it. How would someone who fell into water be recovered without exposing a rescuer?

Related reading · Emergency response at work · Working at Height

Element 10 · Temporary electrical systems and services

CN1

Plant or long materials may enter the space around overhead equipment. Temporary leads may cross the new vehicle route. Obtain reliable service information and competent advice, agree avoidance or isolation where appropriate and verify the route on the ground. Communicate changes to suppliers before the next delivery.

What the assessment asks you to do

  • CN1 · 2.4, elements 4–13 Explain risk assessment principles and apply them to a range of site hazards from elements 4–13. Evaluate existing precautions, propose further controls and plan the actions using the supplied scenario.

Workplace example

A site drawing places a buried supply away from a proposed excavation, but a site marker disagrees. Stop that part of the job and have the authorised team resolve the discrepancy under the safe-dig procedure. Check that plant operators receive the revised information.

Syllabus topic 10.1 · CN1

10.1 · Electrical hazards on site

Consider exposed temporary supplies, damaged leads and wet or conductive conditions. Assess shock, burns and falls caused by contact.

Practise applying it. How might someone come into contact with an energised part?

Related reading · Electrical hazards and risks

Syllabus topic 10.2 · CN1

10.2 · Protecting temporary supplies and tools

Route and protect cables, select suitable equipment and arrange competent inspection and isolation. Keep defective items out of use until verified safe.

Practise applying it. What should happen to a damaged temporary supply lead?

Related reading · Portable Electrical Equipment · Electrical control measures, safe systems and inspection

Syllabus topic 10.3 · CN1

10.3 · Plant near overhead lines

Identify lines before selecting equipment or delivery routes and consult the network operator. Agree safe arrangements and brief visiting drivers as well as site crews.

Practise applying it. Who would confirm the safe arrangements for work near overhead lines?

Related reading · Overhead Power Lines

Syllabus topic 10.4 · CN1

10.4 · Excavation near power cables

Use current service information, competent locating and a planned safe digging method. Stop if information conflicts with site evidence or equipment signals.

Practise applying it. What evidence supports the service location before ground is broken?

Related reading · Buried services and safe excavation

See it in practice Utilities · Confirm buried services before digging

Element 11 · Fire during construction

CN1

A stair used yesterday may be closed today while new combustible materials and hot work increase risk. Check today's route, warning method, temporary compartmentation and assembly arrangements. Coordinate occupied and construction areas. Put someone in charge of reviewing the plan when access, occupancy or the phase of work changes.

What the assessment asks you to do

  • CN1 · 2.4, elements 4–13 Explain risk assessment principles and apply them to a range of site hazards from elements 4–13. Evaluate existing precautions, propose further controls and plan the actions using the supplied scenario.

Workplace example

A refurbishment opens a void between two floors before the replacement fire separation is complete. Review temporary precautions, escape and warning with the site and premises managers. Check both floors before a shift change.

Syllabus topic 11.1 · CN1

11.1 · Fire during construction

Recognise changing ignition sources and combustible materials, including temporary enclosures. Follow possible smoke and heat paths to people on different levels.

Practise applying it. How does unfinished construction affect the spread of smoke?

Related reading · Fire Principles

See it in practice Shopfitting · Manage hot work in an occupied building

Syllabus topic 11.2 · CN1

11.2 · Preventing fire and limiting spread

Coordinate hot work, temporary storage, waste removal and fire separation. Review precautions when compartmentation or escape routes are incomplete.

Practise applying it. What changes when combustible material arrives before fire doors are fitted?

Related reading · How should ignition sources and hot work be controlled? · Preventing Fire and Fire Spread

See it in practice Shopfitting · Manage hot work in an occupied building

Syllabus topic 11.3 · CN1

11.3 · Detection, alarms and firefighting

Check that the warning reaches workers across the changing site and identify suitable equipment and escape arrangements. Recheck coverage at each phase.

Practise applying it. Would the alarm be heard and the fire service have access during this phase?

Related reading · Fire Alarms and Firefighting

Element 12 · Construction dust, chemicals and infection hazards

CN1

Look at the actual material, repeated tasks and people nearby, including those cleaning up later. Prefer eliminating the cut or controlling dust at source. Check whether the control captures the dust throughout the cut. Select any necessary respiratory protection for the remaining exposure and verify its suitability for the wearer.

What the assessment asks you to do

  • CN1 · 2.4, elements 4–13 Explain risk assessment principles and apply them to a range of site hazards from elements 4–13. Evaluate existing precautions, propose further controls and plan the actions using the supplied scenario.

Workplace example

Stone cutting moves indoors when rain starts. Reassess who shares the air, verify the control method and review cleaning before moving the work. Check performance during actual cutting, including the exposure of neighbouring trades.

Syllabus topic 12.1 · CN1

12.1 · Hazardous materials on site

Identify purchased products and substances created by work, such as dust and fume. Check who handles them and who else shares the work area.

Practise applying it. Which materials and work processes could release hazardous substances?

Related reading · What is construction dust and how should it be controlled? · What are chemical and biological agents at work?

Syllabus topic 12.2 · CN1

12.2 · Assessing exposure on site

Observe the activity, duration and route of exposure before choosing controls. Include adjacent trades, cleaners and people using occupied parts of the building.

Practise applying it. Who might breathe dust from another trade’s work?

Related reading · Assessment of health risks from hazardous substances

See it in practice Commercial refurbishment · Find hidden asbestos before disturbance

Syllabus topic 12.3 · CN1

12.3 · Controlling harmful substances

Consider changing the process or material, capture contaminants at source and check performance. Use suitable residual protection alongside effective engineering controls.

Practise applying it. How would you check extraction during the actual cutting task?

Related reading · Ventilation, Local Exhaust Ventilation and Workplace Air Control

Syllabus topic 12.4 · CN1

12.4 · Agent-specific precautions

Match precautions to the actual hazard, such as asbestos disturbed in refurbishment, respirable silica when cutting, or wet cement on skin.

Practise applying it. What would trigger a stop and specialist advice on an unknown material?

Related reading · Asbestos risk management and compliance · Silica Dust

See it in practice Commercial refurbishment · Find hidden asbestos before disturbance

Element 13 · Physical and psychological harm on site

CN1

Check the job design before attributing errors to carelessness. Noise can mask signals, vibration may affect tool users and rushed programmes can reduce recovery time. Ask workers about the task, hours and handovers. Reduce the exposure and demands at source, then observe whether communication and performance improve.

What the assessment asks you to do

  • CN1 · 2.4, elements 4–13 Explain risk assessment principles and apply them to a range of site hazards from elements 4–13. Evaluate existing precautions, propose further controls and plan the actions using the supplied scenario.

Workplace example

A breaker is shared by three trades, but each supervisor counts only their own job. Review actual tool use with the workers, look for a lower-vibration work method and check whether the new sequence reduces total exposure.

Syllabus topic 13.1 · CN1

13.1 · Noise across site trades

Assess both the operator and nearby people during noisy work. Consider quieter methods, exclusion, enclosures and hearing protection for remaining exposure.

Practise applying it. Which other trades share the noise exposure from a breaker?

Related reading · Noise Risk Assessment and Hearing Conservation

Syllabus topic 13.2 · CN1

13.2 · Vibration from plant and tools

Check real trigger time, tool maintenance and the condition of routes used by mobile plant. Choose ways to reduce exposure at source.

Practise applying it. How much time do workers actually operate a vibrating tool?

Related reading · Vibration Risk Assessment and Health Controls

See it in practice Groundworks · Control hand-arm vibration exposure

Syllabus topic 13.3 · CN1

13.3 · Radiation exposures on projects

Distinguish sun and welding radiation from ionising sources. Check who could be exposed, how access is controlled and when specialist advice is needed.

Practise applying it. What controls apply to arc radiation or outdoor UV exposure?

Related reading · Radiation and Radon · Optical Radiation Effects (UV and Lasers)

Syllabus topic 13.4 · CN1

13.4 · Pressure, fatigue and mental ill health

Consider demands, control, support, relationships, roles and change. Discuss workable improvements with trades and provide a confidential way to obtain help.

Practise applying it. Where do work demands leave too little time for recovery?

Related reading · Mental ill-health and work-related stress

See it in practice Rail infrastructure · Plan fatigue-sensitive night work

Syllabus topic 13.5 · CN1

13.5 · Violence affecting site personnel

Consider public-facing work, remote staff, threats and bullying. Plan communication, immediate support and investigation of recurring situations.

Practise applying it. Which site interfaces put workers at risk of threats or assault?

Related reading · Violence at Work

Syllabus topic 13.6 · CN1

13.6 · Impairment on safety-critical work

Recognise the risks of alcohol, drugs and some medicines when driving plant or working at height. Use a fair policy, immediate protection and confidential support.

Practise applying it. How would the team protect people if a plant operator appeared impaired?

Related reading · Substance Misuse and Workplace Support

How could you use this qualification at work?

On a school refurbishment, the project team can apply the course by separating deliveries from pupils and checking the arrangements when the gate is busiest.

At a fictional school refurbishment, the client needs a pupil entrance open while a contractor receives a delivery. The site supervisor discovers that yesterday's barrier now leads pupils into the unloading route. The team holds the delivery, agrees separation and timings with the school, and briefs the driver and trades. The principal contractor checks the first delivery and the next school arrival, then updates the site arrangements. The important evidence is what happens at the interface during use.

What does this learning look like in different workplaces?

Use these 12 examples to connect a workplace problem with a decision, an accountable role and a check that protection works. Each example links to relevant syllabus references and practical SHAREhub guidance.

These fictional SHAREhub examples show how learning can support real decisions. They are teaching illustrations, with selected issues rather than complete risk assessments or model assessment answers. Apply current guidance and competent judgement to the actual workplace.

HousebuildingKeep an excavation stable

What could go wrong?

A drainage trench is opened beside stored materials. Ground or surcharge failure could bury the people inside.

How could you apply the learning?

Plan a suitable support or battering solution with competent input. Control loading near the edge, access, water and inspection before entry.

Who checks that it works?

The site manager verifies the agreed system and inspection arrangements. Reassess after conditions change, including rain or nearby plant movement.

Study references 4.1 Understanding excavation hazards · 4.2 Keeping excavations safe

Apply it with SHAREhub Excavations: ground, services and inspection · Buried services and safe excavation · Excavation safety and field controls

Commercial refurbishmentFind hidden asbestos before disturbance

What could go wrong?

A fit-out team starts drilling an older ceiling without adequate information. Disturbed asbestos could cause fatal disease years later.

How could you apply the learning?

Stop disturbance and establish the asbestos information appropriate to the work scope. Arrange competent survey or specialist work where needed before release of the area.

Who checks that it works?

The project manager checks that the survey covers the actual task and that findings reach every contractor who may disturb the material.

Study references 12.2 Assessing exposure on site · 12.4 Agent-specific precautions

Apply it with SHAREhub Assessment of health risks from hazardous substances · Asbestos risk management and compliance · Silica Dust

RoadworksProtect workers beside live traffic

What could go wrong?

A resurfacing crew works next to public traffic and reversing plant. A vehicle intrusion could cause multiple casualties.

How could you apply the learning?

Plan suitable traffic management, pedestrian diversion and plant separation with competent designers and the relevant authority. Check the route for the public and emergency access.

Who checks that it works?

The site supervisor checks the installed arrangement before work and after changes. Escalate inadequate space or damaged barriers.

Study references 6.1 Safe pedestrian routes · 6.2 Managing plant movements

Apply it with SHAREhub Safe Movement of People and Vehicles in the Workplace · Mobile plant and vehicles

UtilitiesConfirm buried services before digging

What could go wrong?

An excavator is due to open a trench across a service corridor. A cable strike can cause burns, electric shock and service disruption.

How could you apply the learning?

Obtain information, locate and identify services using competent people, then agree safe excavation methods and exclusion arrangements. Treat uncertain records as a reason for further investigation.

Who checks that it works?

The supervisor verifies the permit or release process against actual markings and findings. Stop and reassess unexpected services.

Study references 10.4 Excavation near power cables · 4.2 Keeping excavations safe

Apply it with SHAREhub Buried services and safe excavation · Excavation safety and field controls

RoofingPrevent a fall through a fragile roof

What could go wrong?

A maintenance worker needs to cross fragile roof panels to reach a gutter. A panel may fail without warning.

How could you apply the learning?

Consider access that avoids stepping onto the roof. Plan suitable collective fall prevention, access and rescue with competent support before work starts.

Who checks that it works?

The contractor checks the complete access arrangement and rescue readiness. Reassess weather, roof condition and changing work locations.

Study references 7.1 Planning work at height · 7.2 Using access equipment and roofs

Apply it with SHAREhub Working at Height · Scaffolding Safety

DemolitionSequence work to preserve stability

What could go wrong?

Removing a wall may take away support for floors above. Workers and neighbouring occupants could be struck by collapse.

How could you apply the learning?

Obtain structural information and a competent demolition sequence. Establish exclusion areas, service isolation and checks at the planned hold points.

Who checks that it works?

The demolition supervisor confirms authorisation for each stage and stops when the structure differs from the agreed assumptions.

Study references 5.1 Stability during demolition · 5.2 Information before dismantling

Apply it with SHAREhub Demolition and dismantling safety · Asbestos risk management and compliance

Civil engineeringControl a temporary works change

What could go wrong?

A team changes a propping arrangement to make room for deliveries. Lost support could cause structural failure.

How could you apply the learning?

Refer the proposed change through the temporary works process. Obtain the necessary design and checking before alteration, with access controlled while the issue is resolved.

Who checks that it works?

The responsible temporary works role records the change and release. Confirm the installed arrangement matches the approved information.

Study references 1.6 Managing temporary works · 3.1 Handling design or site changes

Apply it with SHAREhub How should construction hazards be controlled? · Management of workplace change

Industrial constructionCoordinate lifting over shared space

What could go wrong?

A delivery crane is planned beside operating plant and other trades. A suspended load or overturning crane could crush people.

How could you apply the learning?

Have a competent lift planner assess the load, ground, equipment and interfaces. Agree exclusion and communication arrangements and prevent conflicting work.

Who checks that it works?

The lifting supervisor confirms conditions match the plan. Pause for changes to weather, ground, load or adjacent operations.

Study references 8.3 Handling loads mechanically · 1.5 Site layout, security and order

Apply it with SHAREhub Load-Handling Equipment and Lifting Operations · What should a construction phase plan include?

GroundworksControl hand-arm vibration exposure

What could go wrong?

A worker uses a road breaker for long periods because the chosen method is slow. Repeated exposure can damage nerves and circulation.

How could you apply the learning?

Consider a different breaking method or mechanised equipment. Select and maintain suitable tools and plan exposure using reliable task information.

Who checks that it works?

The supervisor checks actual use time and reports of symptoms. Arrange appropriate health surveillance through competent support where required.

Study references 13.2 Vibration from plant and tools · 9.2 Managing hand tools

Apply it with SHAREhub Vibration Risk Assessment and Health Controls · Hand-Held Tools

ShopfittingManage hot work in an occupied building

What could go wrong?

Hot work occurs beside combustible packaging while the shop remains occupied. Sparks could start a concealed fire and affect escape.

How could you apply the learning?

Consider a cold-work method. Where hot work remains necessary, coordinate fire precautions, combustible removal, suitable separation and the permit arrangements with the building occupier.

Who checks that it works?

The permit issuer verifies the conditions, monitoring and handback. Check concealed spaces and follow the site-specific post-work fire watch arrangements.

Study references 11.1 Fire during construction · 11.2 Preventing fire and limiting spread

Apply it with SHAREhub Fire Principles · How should ignition sources and hot work be controlled? · Preventing Fire and Fire Spread

Rail infrastructurePlan fatigue-sensitive night work

What could go wrong?

A night crew has long travel before a demanding possession. Fatigue can impair judgement around moving equipment and electrical hazards.

How could you apply the learning?

Review shifts, travel, rest and workload with the workforce. Plan competent staffing and the infrastructure controller’s protection arrangements.

Who checks that it works?

The delivery manager reviews actual hours and fitness concerns before work. Adjust staffing or work scope when safe performance cannot be maintained.

Study references 13.4 Pressure, fatigue and mental ill health · 3.2 Writing a usable work method

Apply it with SHAREhub Mental ill-health and work-related stress · Safe Systems of Work

Public-sector projectsProtect people outside the site

What could go wrong?

A library extension shares a boundary with public access. Falling materials, open gates and delivery movements expose visitors and children.

How could you apply the learning?

Design secure separation and protected routes, coordinate deliveries and control overhead work. Check access for people who need assistance.

Who checks that it works?

The principal contractor checks the boundary and public route daily and after each change. Act promptly on reports from library staff.

Study references 1.5 Site layout, security and order · 7.3 Protecting people below and nearby

Apply it with SHAREhub What should a construction phase plan include? · Dropped Objects

What should you check before your assessment?

Check the CN1 sitting and submission deadline with your Learning Partner and practise drawing conclusions from project drawings, site evidence and the scenario.

Is CN1 a level 7 qualification everywhere?

The current award sits at SCQF level 7 with 12 Scottish credits, comparable in level to RQF level 4. Framework numbers are meaningful only with the framework name. NEBOSH describes recognition for the CSCS Academically Qualified Person route for the relevant edition. CSCS decides applications and other requirements apply. Check your exact award and the current card criteria before making a claim to an employer.

Is the National Construction Certificate still the current award?

The current qualification is NEBOSH Health and Safety Management for Construction (UK), assessed through CN1. It replaced the withdrawn National Certificate in Construction Health and Safety. Historical NGC1, NCC1 and NCC2 paperwork belongs to a different specification. A learner with an incomplete older registration should ask their Learning Partner to check their record. The International construction route uses CI1.

Who plans what when several contractors share a site?

For a Great Britain project, identify the client arrangements and which duties sit with designers, contractors and the principal dutyholders on a multi-contractor project. Trace how pre-construction information reaches design and how remaining risks reach the construction phase plan and the trade doing the work. Northern Ireland uses its own CDM Regulations 2016 and HSENI. Establish the jurisdiction and parties before giving a legal answer.

Can I study while working full time?

Yes, if you can protect enough regular study time and arrange the assessment period. Compare day release, evening study, taught blocks and supported online learning with your shift pattern. Ask about tutor access, missed sessions and practice feedback. Agree any workplace evidence collection and study leave with your employer before enrolling.

What should I ask a Learning Partner before paying?

Ask for a written breakdown of tuition, materials, assessment registration, resits and any additional support costs. Confirm accreditation for the exact qualification, the specification taught, assessment dates, tutor access and how workplace access is supported. Compare the complete package and your available time. Fees and funding depend on the provider and your circumstances.

Can disability, dyslexia or another access need be supported?

Discuss your needs with the Learning Partner early so it can apply for appropriate access arrangements or reasonable adjustments. NEBOSH determines the approved arrangement. Confirm it before the assessment and raise any mismatch promptly. The aim is fair access while retaining the assessment standard.

Can I use SHAREhub AI or another AI tool during an assessment?

Only use AI if your specific assessment instructions or an approved reasonable adjustment explicitly permit it. NEBOSH’s current malpractice policy otherwise prohibits AI use during assessment. Keep assessment questions and controlled materials out of AI tools. Use SHAREhub for general learning outside assessment conditions and produce your own assessed work.

Does passing make me a competent safety adviser?

Passing provides evidence of assessed learning. Competence also depends on relevant skills, experience and behaviours, and on the complexity of the work. Build supervised practice, seek feedback, keep knowledge current and recognise when to involve a specialist. An employer or client should evaluate what you can reliably do in the actual role.

Will this guarantee a job or professional membership?

No qualification can guarantee a job or a membership grade. Employers consider relevant experience, communication, judgement and the needs of the role alongside learning. Check the professional body’s current requirements for your exact award, experience and continuing development before claiming eligibility.

What should I do if I receive a refer result?

Use the result notice and available feedback to identify the outstanding requirement, then agree further study and re-entry with your Learning Partner. Confirm the applicable specification, unit validity and fees before booking. If you believe the result should be reviewed, ask promptly about the current NEBOSH enquiries-about-results process and its deadline.

Does the framework level mean this is the same as another qualification?

A framework level describes the demand of learning. It does not make two awards identical in size, subject coverage or purpose. Always give the framework name, qualification title and specification. Credits describe learning volume, while professional recognition and permission to undertake a role have separate requirements.

What responsibilities can I take on after this qualification?

Use this learning to improve construction planning, coordination and site decisions. A qualification alone does not establish competence to act as a principal designer, design temporary works, plan a complex lift or inspect specialist equipment. Match responsibilities to relevant knowledge, experience and support.

How does this compare with other NEBOSH qualifications?

Choose Construction (UK) when your decisions concern projects, trades and changing site conditions. The General Certificate covers a broader range of workplaces.

Where can you check the official syllabus and assessment guidance?

NEBOSH publishes the syllabus and assessment guidance for this qualification. Match the unit code and specification on your registration to the guides below.